Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Defect-Driven Configurational Entropy in the High-Entropy Oxide Li 1.5 MO 3-δ

Layered lithiated oxides are promising materials for next generation Li-ion battery cathode materials; however, instability during cycling results in poor performance over time compared to the high capacities theoretically possible with these materials. Here, in this paper, we report the characterizations of a Li 1.47 Mn 0.57 Al 0.13 Fe 0.095 Co 0.105 Ni 0.095 O 2.49 high-entropy layered oxide (HELO) with the Li 2 MO 3 structure where M = Mn, Al, Fe, Co, and Ni. Using electron microscopy and X-ray spectroscopy, we identify a homogeneous Li 2 MO 3 structure stabilized by the entropic contribution of oxygen vacancies. This defect-driven entropy would not be attainable in the LiMO 2 structure sometimes observed in similar materials as a secondary phase owing to the presence of fewer O sites and a 3+ oxidation state for the metal site; instead, a Li 2-γ MO 3-δ is produced. Beyond Li 2 MO 3 , this defect-driven entropy approach to stabilizing novel compositions and phases can be applied to a wide array of future cathode materials including spinel and rock salt structures.

25 ENERGY STORAGE↗
DOE OSTI2019

Photosensitive free-standing ultra-thin carbyne–gold films

In the article we introduce the experiment of the photostimulation effect in the tunneling conductivity of free-standing thin carbyne-gold films. We observe a sharp increase of the conductivity of hybrid film due to the electromagnetic exciting at the frequencies which are close to the plasmon resonance of gold nanoparticles. The use of carbyne threads as a stabilizing matrix makes it possible to obtain free-standing thin films that demonstrate a good structural stability. The tunnel current–voltage measurements demonstrate a strong dependence of the current value on the intensity of green laser radiation used to photostimulate thin C–Au in area of the measuring experiment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1987

Spillover stabilization and decentralized modal control of large space structures

The stabilization of the neglected dynamics of the higher modes of vibration in large space structures is studied, and the influence of the structure of the plant noise intensity matrix of the Kalman-Bucy filter on the stability margin of the residual modes is shown. An optimization procedure uses information on the residual modes to minimize spillover of known residual modes while preserving robustness with respect to the unknown dynamics, and the optimum plant noise intensity matrix is selected to maximize the stability margins of the residual modes and to properly place the observer poles. Examples for both centralized and decentralized control are considered.

Czajkowski, Eva A.↗
DOE OSTI2022

Role of electronic energy loss on defect production and interface stability: Comparison between ceramic materials and high-entropy alloys

High-entropy alloys (HEAs) and some complex alloys exhibit desirable properties and significant structural stability in harsh environments, including possible applications in advanced reactors. Energetic ion irradiation is often used as a surrogate for neutron irradiation; however, the impact of ion electronic energy deposition and dissipation is often neglected. Moreover, differences in recoil energy spectrum and density of cascade events on damage evolution must also be considered. In many chemically complex alloys, the mean free path of electrons is reduced significantly, thus their decreased thermal conductivity and slow dissipation of localized radiation energy can have noticeable effects on displacement cascade evolution that is greatly different from metals with high thermal conductivity. In this work, nanocrystalline HEAs of Ni 20 Fe 20 Co 20 Cr 20 Cu 20 and nonequiatomic (NiFeCoCr) 97 Cu 3 , both having much lower room-temperature thermal conductivity than pure Ni or Fe, are chosen as model HEAs to reveal the role that electronic energy loss during ion irradiation has in complex alloys. The response of nanocrystalline HEAs is investigated under irradiation at room temperature using MeV Ni and Au ions that have different ratios of electronic energy to damage energy, which is the energy dissipated in displacing atoms. Different from previously reported amorphization of nanocrystalline SiC, experimental results on these HEAs show that, similar to the process in nanocrystalline oxide materials, both inelastic thermal spikes via electron–phonon coupling and elastic thermal spikes via collisions among atomic nuclei contribute to the overall grain growth. The growth follows a power law dependence with the total deposited ion energy, and the derived value of the power-exponent suggests that the irradiation-induced instability at and near grain boundaries leads to local rapid atomic rearrangements and consequently grain growth. The high power-exponent value can be attributed to the sluggish diffusion and delayed defect evolution arising from the chemical complexity intrinsic to HEAs. Here, this work calls attention to quantified fundamental understanding of radiation damage processes beyond that of simplified displacement events, especially in simulating neutron environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A highly-stable layered Fe/Mn-based cathode with ultralow strain for advanced sodium-ion batteries

Sodium-ion batteries (SIBs) with iron- and manganese-based cathode electrodes have exhibited great promise in the grid-scale energy storage systems, on the basis of the satisfactory theoretical capacity, as well as huge abundance, low price and non-toxicity of raw materials. However, the inferior cycle life of cathode materials originating from their poor structural stability remains a formidable challenge towards practical applications. In this study, an efficient strategy of improving the structure durability is demonstrated in iron- and manganese-based cathodes by dual heteroatom doping. The as-obtained P2-type Na 0.65 Li 0.08 Cu 0.08 Fe 0.24 Mn 0.6 O 2 cathode delivers superior cyclability (88.2% capacity retention for 500 cycles at 2C), fabulous rate capability (76% capacity retention at 5C compared to 0.1C), and a useable reversible capacity of around 85 mAh g -1 at 0.1C. Through in-depth characterizations, the underlying structure-property relationship is established, revealing that the complete solid-solution reaction during cycling ensures the ultralow volume variation (as small as 0.7%) and excellent electrochemical performance. These results highlight the significance of fabricating a stable host for the design and development of advanced SIBs with long life.

25 ENERGY STORAGE↗
DOE OSTI2022

Top-down mass spectrometry and assigning internal fragments for determining disulfide bond positions in proteins

Disulfide bonds in proteins have a substantial impact on protein structure, stability, and biological activity. Localizing disulfide bonds is critical for understanding protein folding and higher-order structure. Conventional top-down mass spectrometry (TD-MS), where only terminal fragments are assigned for disulfide-intact proteins, can access disulfide information, but suffers from low fragmentation efficiency, thereby limiting sequence coverage. Here, we show that assigning internal fragments generated from TD-MS enhances the sequence coverage of disulfide-intact proteins by 20–60% by returning information from the interior of the protein sequence, which cannot be obtained by terminal fragments alone. Further, the inclusion of internal fragments can extend the sequence information of disulfide-intact proteins to near complete sequence coverage. Importantly, the enhanced sequence information that arise from the assignment of internal fragments can be used to determine the relative position of disulfide bonds and the exact disulfide connectivity between cysteines. The data presented here demonstrates the benefits of incorporating internal fragment analysis into the TD-MS workflow for analyzing disulfide-intact proteins, which would be valuable for characterizing biotherapeutic proteins such as monoclonal antibodies and antibody–drug conjugates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Delineating the impact of Ti/Mg substitution in P2-type Na 2/3 Ni 1/3 Mn 2/3 O 2 with an advanced electrolyte for sodium-ion batteries

Sodium layered oxide cathodes are drawing interest globally as a potential alternative to lithium layered oxides, but they suffer from egregious capacity fade and have intrinsically lower capacity. P2-type Na 2/3 Ni 1/3 Mn 2/3 O 2 is a particularly relevant cathode material as it demonstrates an energy density of up to 550 W h kg −1 at high operating potentials, although this can only be maintained for a handful of cycles with industrial electrolytes. Here, a localized saturated electrolyte (LSE) is shown to significantly improve the cycle life of Na 2/3 Ni 1/3 Mn 2/3 O 2 by suppressing the surface reactivity, despite large volume changes during cycling. The demonstrated influence of surface stability on cycle life in this work challenges the prevailing notion of a popular capacity stabilization strategy with titanium/magnesium co-doping, which is primarily thought to improve cycle life via improved structural stability. Single crystals of Na 2/3 Ni 1/3−x Mg x Mn 2/3−2x Ti 2x O 2 (x = 0, 1/48, 1/24, 1/12) materials are cycled with a traditional electrolyte and the LSE to demonstrate that despite eliminating the phase transition with dopants in Na 2/3 Ni 1/4 Mg 1/12 Mn 1/2 Ti 1/6 O 2 , the predominant role of the dopants is in reducing the parasitic oxygen reactivity at the cathode surface. The different roles these dopants play are systematically disambiguated, and this work can guide future research to focus on reducing the parasitic cathode/electrolyte reactivity further.

25 ENERGY STORAGE↗
NASA NTRS1992

Interfacial stability of CoSi2/Si structures grown by molecular beam epitaxy

The stability of CoSi2/Si interfaces was examined in this study using columnar silicide structures grown on (111) Si substrates. In the first set of experiments, Co and Si were codeposited using MBE at 800 C and the resulting columnar silicide layer was capped by epitaxial Si. Deposition of Co on the surface of the Si capping layer at 800 C results in the growth of the buried silicide columns. The buried columns grow by subsurface diffusion of the deposited Co, suppressing the formation of surface islands of CoSi2. The column sidewalls appear to be less stable than the top and bottom interfaces, resulting in preferential lateral growth and ultimately in the coalescence of the columns to form a continuous buried CoSi2 layer. In the second set of experiments, annealing of a 250 nm-thick buried columnar layer at 1000 C under a 100 nm-thick Si capping layer results in the formation of a surface layer of CoSi2 with a reduction in the sizes of the CoSi2 columns. For a sample having a thicker Si capping layer the annealing leads to Ostwald ripening producing buried equiaxed columns. The high CoSi2/Si interfacial strain could provide the driving force for the observed behavior of the buried columns under high-temperature annealing.

George, T.↗
NASA NTRS1983

Full-scale testing, production and cost analysis data for the advanced composite stabilizer for Boeing 737 aircraft. Volume 1: Technical summary

The full scale ground test, ground vibration test, and flight tests conducted to demonstrate a composite structure stabilizer for the Boeing 737 aircraft and obtain FAA certification are described. Detail tools, assembly tools, and overall production are discussed. Cost analyses aspects covered include production costs, composite material usage factors, and cost comparisons.

Aniversario, R. B.↗
DOE OSTI2022

High-Entropy and Superstructure-Stabilized Layered Oxide Cathodes for Sodium-Ion Batteries

Layered transition metal oxides are appealing cathodes for sodium-ion batteries due to their overall advantages in energy density and cost. But their stabilities are usually compromised by the complicated phase transition and the oxygen redox, particularly when operating at high voltages, leading to poor structural stability and substantial capacity loss. Here, in this study, an integrated strategy combing the high-entropy design with the superlattice-stabilization to extend the cycle life and enhance the rate capability of layered cathodes is reported. It is shown that the as-prepared high-entropy Na 2/3 Li 1/6 Fe 1/6 Co 1/6 Ni 1/6 Mn 1/3 O 2 cathode enables a superlattice structure with Li/transition metal ordering and delivers excellent electrochemical performance that is not affected by the presence of phase transition and oxygen redox. It achieves a high reversible capacity (171.2 mAh g –1 at 0.1 C), a high energy density (531 Wh kg –1 ), extended cycling stability (89.3% capacity retention at 1 C for 90 cycles and 63.7% capacity retention at 5 C after 300 cycles), and excellent fast-charging capability (78 mAh g –1 at 10 C). This strategy would inspire more rational designs that can be leveraged to improve the reliability of layered cathodes for secondary-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Navigating the complexities of solvent and binder selection for solution processing of sulfide solid-state electrolytes

We introduce a paradigm of solvent and binder selection for solution-processing Li 6 PS 5 Cl solid-state electrolyte particles based on Hansen solubility parameters. Treatment of the Li 6 PS 5 Cl in selected solvents results in particle morphological change, but crystallographic structure remains intact. Although solution processing reduced the Li 6 PS 5 Cl ionic conductivity, it promotes interfacial stability by alleviating reduction of the solid electrolyte in contact with Li metal. In conclusion, these findings have the potential to enhance the stability, structural integrity, and performance of sulfide solid-state electrolytes in practical applications.

25 ENERGY STORAGE↗
NASA NTRS2012

Space-based Observational Constraints for 1-D Plume Rise Models

We use a space-based plume height climatology derived from observations made by the Multi-angle Imaging SpectroRadiometer (MISR) instrument aboard the NASA Terra satellite to evaluate the ability of a plume-rise model currently embedded in several atmospheric chemical transport models (CTMs) to produce accurate smoke injection heights. We initialize the plume-rise model with assimilated meteorological fields from the NASA Goddard Earth Observing System and estimated fuel moisture content at the location and time of the MISR measurements. Fire properties that drive the plume-rise model are difficult to estimate and we test the model with four estimates for active fire area and four for total heat flux, obtained using empirical data and Moderate Resolution Imaging Spectroradiometer (MODIS) re radiative power (FRP) thermal anomalies available for each MISR plume. We show that the model is not able to reproduce the plume heights observed by MISR over the range of conditions studied (maximum r2 obtained in all configurations is 0.3). The model also fails to determine which plumes are in the free troposphere (according to MISR), key information needed for atmospheric models to simulate properly smoke dispersion. We conclude that embedding a plume-rise model using currently available re constraints in large-scale atmospheric studies remains a difficult proposition. However, we demonstrate the degree to which the fire dynamical heat flux (related to active fire area and sensible heat flux), and atmospheric stability structure influence plume rise, although other factors less well constrained (e.g., entrainment) may also be significant. Using atmospheric stability conditions, MODIS FRP, and MISR plume heights, we offer some constraints on the main physical factors that drive smoke plume rise. We find that smoke plumes reaching high altitudes are characterized by higher FRP and weaker atmospheric stability conditions than those at low altitude, which tend to remain confined below the BL, consistent with earlier results. We propose two simplified parameterizations for computing injection heights for fires in CTMs and discuss current challenges to representing plume injection heights in large scale atmospheric models.

Martin, Maria Val↗
DOE OSTI2026

Structural Heterogeneity in Medium-Entropy AgMnSbPbTe 4 for Glassy Thermal Transport and High Thermoelectric Performance

Medium-entropy semiconductors represent a unique category of entropy-engineered materials. They possess a considerable level of randomness in atomic mixing, although this is not sufficient to conclusively achieve single-phase structure stabilization, in contrast to high-entropy materials. This introduces strong competition between the formation of different phases, which can potentially lead to structural heterogeneity. Here, in this work, we uncover endotaxial nanoprecipitates in the microscopically identified homogeneous medium-entropy semiconductor AgMnSbPbTe 4 . These nanoprecipitates initially crystallize in a cubic phase $(Fm\bar{3}m)$ within kinetically stabilized AgMnSbPbTe 4 , subsequently evolving into a thermodynamically stable monoclinic phase $(P2_1/c)$ during thermal annealing while maintaining an endotaxial relationship with the matrix lattice. This nanophase segregation and the resultant lattice mismatch at interfaces introduce strain fluctuations up to 5% at intervals of 20 nm across the entire microstructure. Within the matrix phase, atomic displacement of up to 23 pm was observed. This structural heterogeneity results in glass-like thermal transport behavior, achieving an ultralow lattice thermal conductivity κ L = 0.312 Wm –1 K –1 at 800 K, which is in accordance with the amorphous limit predicted by the Cahill model. The synergy of band convergence effect and well-maintained carrier mobility leads to a maximum ZT of 1.72 at 800 K and an average ZT avg of 1.02 over the temperature range of 300–825 K. This study highlights that the underexplored structural heterogeneity in medium-entropy semiconductors can potentially yield beneficial phenomena, such as the phonon-glass electron-crystal transport behavior in this case, which holds promise for advancing thermoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the melting point and phase stability of rare-earth oxides to facilitate their crystal growth from the melt

The challenge of growing rare-earth (RE) sesquioxide crystals can be overcome by tailoring their structural stability and melting point via composition engineering. This work contributes to the advancement of the field of crystal growth of high-entropy oxides. A compound with only small REs (Lu,Y,Ho,Yb,Er) 2 O 3 maintains a cubic C-type structure upon cooling from the melt, as observed via in-situ high-temperature neutron diffraction on aerodynamically levitated samples. On the other hand, a compound with a mixture of small and large REs (Lu,Y,Ho,Nd,La) 2 O 3 crystallizes as a mixture of a primary C-type phase with an unstable secondary phase. Crystals of compositions (Lu,Y,Ho,Nd,La) 2 O 3 and (Lu,Y,Gd,Nd,La) 2 O 3 were grown by the micro-pulling-down (mPD) method with a single monoclinic B-type phase, while a powder of (Lu,Y,Ho,Yb,Er) 2 O 3 did not melt at the maximum operating temperature of an iridium-rhenium crucible. The minimization of the melting point of the two grown crystals is attributed to the mismatch in cation sizes. The electron probe microanalysis reveals that the general element segregation behavior in the crystals depends on the composition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Voltage Potassium Hexacyanoferrate Cathode via High-Entropy and Potassium Incorporation for Stable Sodium-Ion Batteries

Prussian blue analogues (PBAs) used as sodium ion battery (SIB) cathodes are usually the focus of attention due to their three-dimensional open frame and high theoretical capacity. Nonetheless, the disadvantages of a low working voltage and inferior structural stability of PBAs prevent their further applications. Herein, we propose constructing the K x (MnFeCoNiCu)[Fe(CN) 6 ] (HE-K-PBA) cathode by high-entropy and potassium incorporation strategy to simultaneously realize high working voltage and cycling stability. In this study, the reaction mechanism of metal cations in HE-K-PBA are revealed by synchrotron radiation X-ray absorption spectroscopy (XAS), ex situ X-ray photoelectron spectroscopy (XPS), and in situ Raman spectra. We also investigate the entropy stabilization mechanism via finite element simulation, demonstrating that HE-K-PBA with small von Mises stress and weak structure strain can significantly mitigate the structural distortion. Benefit from the stable structure and everlasting K + (de)intercalation, the HE-K-PBA delivers high output voltage (3.46 V), good reversible capacity (120.5 mAh g –1 at 0.01 A g –1 ), and capacity retention of 90.4% after 1700 cycles at 1.0 A g –1 . Moreover, the assembled full cell and all-solid-state batteries with a stable median voltage of 3.29 V over 3000 cycles further demonstrate the application prospects of the HE-K-PBA cathode.

25 ENERGY STORAGE↗
DOE OSTI2019

Solid–state synthesis of multicomponent equiatomic rare–earth oxides

Phase formation in multicomponent rare–earth oxides is determined by a combination of composition, sintering atmosphere, and cooling rate. Polycrystalline ceramics comprising various combinations of Ce, Gd, La, Nd, Pr, Sm, and Y oxides in equiatomic proportions were synthesized using solid–state sintering. The effects of composition, sintering atmosphere, and cooling rate on phase formation were investigated. Single cubic or monoclinic structures were obtained with a slow cooling of 3.3°C/min, confirming that rare–earth oxides follow a different structure stabilization process than transition metal high–entropy oxides. In an oxidizing atmosphere, both Ce and Pr induce a cubic structure, while only Ce plays that role in an inert or reducing atmosphere. Samples without Ce or Pr develop a single monoclinic structure. The structures formed at initial synthesis may be converted to a different one, when the ceramics are annealed in an additional atmosphere. Phase evolution of a five–cation composition was also studied as a function of sintering temperature. In conclusion, the binary oxides used as raw materials completely dissolve into a single cubic structure at 1450°C in air.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range

The Fe-Co-Cr-Ni quaternary system has been studied extensively in the past decade, not only because of the superior properties achieved like high tensile ductility and fracture toughness, but also it is the foundation for the development of FeCrCoNi-based HEAs. However, most of the investigations are mainly focusing on the equiatomic and semi-equiatomic compositions. The physical properties of non-equiatomic compositions are barely explored. In the current work, the ab initio approach is adopted to predict the lattice parameter, structure stabilities, elastic properties, and enthalpy of formations of fcc Fe-Cr-Co-Ni HEA single crystals with the special quasirandom structure (SQS) method. To expand the design of Fe-Co-Cr-Ni HEAs into a full composition range, the current simulations cover all the binaries, ternaries, and the whole quaternary system. The 2-D composition-property contour diagrams are created to show the physical properties in the ternary and quaternary systems. Furthermore, our investigation shows that the fcc alloys' lattice parameter increases with the addition of Fe and Cr and decreases with Ni and Co. In addition to the enthalpy of formation at o K, the shape distortion rate is proposed to be another essential parameter to evaluate crystal stability. The results show the addition of Cr would destabilize the fcc lattice and cause symmetry breaking. Finally, the result of Pugh’s ratio shows that most of the fcc alloys show ductile behavior (P > 1.75), especially for the alloys around Fe 3 Ni, FeCo, and Fe 2 NiCo (P > 2.5). The brittle behavior (P < 1.75) is located around Fe 3 Cr and Fe 2 CoCr. Meanwhile, Cr 2 NiCo and Cr 2 FeNiCo are considered promising compositions to be tried and verified experimentally because of the higher bulk modulus and moderate shear modulus.

36 MATERIALS SCIENCE↗