Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subsystem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A frequency and timing subsystem for the ORION mobile unit

A mobile surveying instrument in support of the crustal dynamics program measures the length and direction of the distance between sites on the Earth's surface using VLBI techniques operating at microwave frequencies and extragalactic radio sources. The frequency and timing subsystem uses as a frequency standard the hydrogen maser. An important part of the subsystem is a sophisticated automatic system to monitor frequency stability and accumulated clock error.

Clements, P. A.↗
NASA NTRS1980

STS-2: SAIL non-avionics subsystems math model requirements

Simulation of the STS-2 Shuttle nonavionics subsystems in the shuttle avionics integration laboratory (SAIL) is necessary for verification of the integrated shuttle avionics system. The math model (simulation) requirements for each of the nonavionics subsystems that interfaces with the Shuttle avionics system is documented and a single source document for controlling approved changes (by the SAIL change control panel) to the math models is provided.

Bennett, W. P.↗
NASA NTRS1980

The Infrared Astronomical Satellite /IRAS/ Scientific Data Analysis System /SDAS/ sky flux subsystem

The sky flux subsystem of the Infrared Astronomical Satellite Scientific Data Analysis System is described. Its major output capabilities are (1) the all-sky lune maps (8-arcminute pixel size), (2) galactic plane maps (2-arcminute pixel size) and (3) regional maps of small areas such as extended sources greater than 1-degree in extent. The major processing functions are to (1) merge the CRDD and pointing data, (2) phase the detector streams, (3) compress the detector streams in the in-scan and cross-scan directions, and (4) extract data. Functional diagrams of the various capabilities of the subsystem are given. Although this device is inherently nonimaging, various calibrated and geometrically controlled imaging products are created, suitable for quantitative and qualitative scientific interpretation.

Stagner, J. R.↗
NASA NTRS1981

Simultaneous in-flight calibrations of the Galileo science platform and attitude control subsystems

This paper presents a design metholodology and simulation study results for a combined star scanner-gyro-scan platform in-flight calibration for the dual spin Galileo spacecraft. The design process involves three separate parts: the construction of an error model, development of the calibration model, and the selection of the appropriate estimation technique. The major innovative contribution lies in the development of the first two parts which are unique to the Galileo design. A unified procedure has been developed to allow simultaneous calibration of the three subsystems. However, provisions are also made in the software to calibrate each subsystem separately when the necessary a priori information is available.

Lai, J. Y.↗
NASA NTRS1980

ERSYS-SPP access method subsystem design specification

The STARAN special purpose processor (SPP) is a machine allowing the same operation to be performed on up to 512 different data elements simultaneously. In the ERSYS system, it is to be attached to a 4341 plug compatible machine (PCM) to do certain existing algorithms and, at a later date, to perform other to be specified algorithms. That part of the interface between the 4341 PCM and the SPP located in the 4341 PCM is known as the SPP access method (SPPAM). Access to the SPPAM will be obtained by use of the NQUEUE and DQUEUE commands. The subsystem design specification is to incorporate all applicable design considerations from the ERSYS system design specification and the Level B requirements documents relating to the SPPAM. It is intended as a basis for the preliminary design review and will expand into the subsystem detailed design specification.

Weise, R. C.↗
NASA NTRS1982

Attitude control subsystem study for the Land Mobile Satellite System Spacecraft

This Attitude Control Subsystem study applies the generic antenna control technology to the specific requirements of the Land Mobile Satellite System mission and defines suitable attitude control subsystem designs for both the wrap/rib and hoop/column antenna configurations. The technology developments required to establish technology readiness by 1987 are also identified.

Tolivar, A. F.↗
NASA NTRS1982

Preprototype independent air revitalization subsystem

The performance and maturity of a preprototype, three-person capacity, automatically controlled and monitored, self-contained independent air revitalization subsystem were evaluated. The subsystem maintains the cabin partial pressure of oxygen at 22 kPa (3.2 psia) and that of carbon dioxide at 400 Pa (3 mm Hg) over a wide range of cabin air relative humidity conditions. Consumption of water vapor by the water vapor electrolysis module also provides partial humidity control of the cabin environment. During operation, the average carbon dioxide removal efficiency at baseline conditions remained constant throughout the test at 84%. The average electrochemical depolarized concentrator cell voltage at the end of the parametric/endurance test was 0.41 V, representing a very slowly decreasing average cell voltage. The average water vapor electrolysis cell voltage increased only at a rate of 20 mu/h from the initial level of 1.67 V to the final level of 1.69 V at conclusion of the testing.

Schubert, F. H.↗
NASA NTRS1981

Application of improved technology to a preprototype vapor compression distillation /VCD/ water recovery subsystem

Vapor compression distillation (VCD) is considered the most efficient water recovery process for spacecraft application. This paper reports on a preprototype VCD which has undergone the most extensive operational and component development testing of any VCD subsystem to date. The component development effort was primarily aimed at eliminating corrosion and the need for lubrication, upgrading electronics, and substituting nonmetallics in key rotating components. The VCD evolution is documented by test results on specific design and/or materials changes. Innovations worthy of further investigation and additional testing are summarized for future VCD subsystem development reference. Conclusions on experience gained are presented.

Johnson, K. L.↗
NASA NTRS1981

Development of an advanced Sabatier CO2 reduction subsystem

A preprototype Sabatier CO2 reduction subsystem was successfully designed, fabricated and tested. The lightweight, quick starting (less than 5 minutes) reactor utlizes a highly active and physically durable methanation catalyst composed of ruthenium on alumina. The use of this improved catalyst permits a simple, passively controlled reactor design with an average lean component H2/CO2 conversion efficiency of over 99% over a range of H2/CO2 molar ratios of 1.8 to 5 while operating with process flows equivalent to a crew size of up to five persons. The subsystem requires no heater operation after start-up even during simulated 55 minute lightside/39 minute darkside orbital operation.

Kleiner, G. N.↗
NASA NTRS1982

OAO-3 end of mission power subsystem evaluation

End of mission tests were performed on the OAO-3 power subsystem in three component areas: solar array, nickel-cadmium batteries and the On-Board Processor (OBP) power boost operation. Solar array evaluation consisted of analyzing array performance characteristics and comparing them to earlier flight data. Measured solar array degradation of 14.1 to 17.7% after 8 1/3 years is in good agreement with theortical radiation damage losses. Battery discharge characteristics were compared to results of laboratory life cycle tests performed on similar cells. Comparison of cell voltage profils reveals close correlation and confirms the validity of real time life cycle simulation. The successful operation of the system in the OBP/power boost regulation mode demonstrates the excellent life, reliability and greater system utilization of power subsystems using maximum power trackers.

Tasevoli, M.↗
NASA NTRS1982

Spectral characterization of the LANDSAT-D multispectral scanner subsystems

Relative spectral response data for the multispectral scanner subsystems (MSS) to be flown on LANDSAT-D and LANDSAT-D backup, the protoflight and flight models, respectively, are presented and compared to similar data for the Landsat 1,2, and 3 subsystems. Channel-bychannel (six channels per band) outputs for soil and soybean targets were simulated and compared within each band and between scanners. The two LANDSAT-D scanners proved to be nearly identical in mean spectral response, but they exhibited some differences from the previous MSS's. Principal differences between the spectral responses of the D-scanners and previous scanners were: (1) a mean upper-band edge in the green band of 606 nm compared to previous means of 593 to 598 nm; (2) an average upper-band edge of 697 nm in the red band compared to previous averages of 701 to 710 nm; and (3) an average bandpass for the first near-IR band of 702-814 nm compared to a range of 693-793 to 697-802 nm for previous scanners. These differences caused the simulated D-scanner outputs to be 3 to 10 percent lower in the red band and 3 to 11 percent higher in the first near-IR band than previous scanners for the soybeans target. Otherwise, outputs from soil and soybean targets were only slightly affected. The D-scanners were generally more uniform from channel to channel within bands than previous scanners.

Markham, B. L.↗
NASA NTRS1982

Spacecraft radio frequency subsystem

The historical background for the development of the planetary (RFS) is reviewed, and the performance capabilities of the various functional subassemblies are described. The flight radio frequency subsystem is a valid component for the three spacecraft telecommunications functions of tracking, command, and telemetry. It is the radio and the signal processing equipment residing in the spacecraft that interfaces with the control & data subsystem and performs two-way communications with the Earth-based Deep Space Network. The RFS consists of all the elements for RF reception, demodulation, modulation, and transmission, including those for command detection and telemetry modulation.

Tam, M. K.↗
NASA NTRS1983

Timing subsystem development: Network synchronization experiments

This paper describes a program in which several experimental timing subsystem prototypes were designed, fabricated, and field tested using a small network of troposcatter and microwave digital communication links. This equipment was responsible for modem/radio interfacing, time interval measurement, clock adjustment and distribution, synchronization technique, and node to node information exchange. Presented are discussions of the design approach, measurement plan, and performance assessment methods. Recommendations are made based on the findings of the test program and an evaluation of the design of both the hardware and software elements of the timing subsystem prototypes.

Backe, K. R.↗
NASA NTRS1982

On-orbit propulsion requirements and performance assessment of ion propulsion subsystems for future GEO large satellite missions

It is pointed out that a large class of future spacecraft, referred to as large space structures (LSS), will require advanced stationkeeping thrust subsystems. The present investigation is concerned with the performance requirements of such advanced stationkeeping thrust subsystems. An analytical model is employed to evaluate the sensitivity of the total stationkeeping thrust-system mass, for geosynchronous spacecraft, to variations in the mission parameters and thrust-system performance, taking into account ion propulsion thrust systems. The model is formulated for geosynchronous missions and considers only the N-S orbit perturbations due to sun-moon forces and the E-W orbit perturbations due to solar pressure, since these are the dominant orbit perturbations of LSS missions. The thrust system is scaled in relation to the performance capabilities of the existing 8- and 30-cm diameter ion-thruster technology and consists of separate N-S and E-W thrusters.

Wessel, F. J.↗
NASA NTRS1982

Spacelab - Subsystems performance capabilities

Spacelab, with its multiplicity of configuration options and associated subsystem capabilities provides the user with a unique set of environments and facilities to conduct scientific investigations in space. This paper provides an insight into the Spacelab resources and their efficient application to payloads and experiment integration for the manned and unmanned options. Subsystem capabilities and constraints for various types of missions and experiments are discussed in terms of structural support, power, thermal conditioning, pointing and stability, and command and data management.

Tanner, E. R.↗
NASA NTRS1982

Shuttle Orbiter Atmospheric Revitalization Pressure Control Subsystem

The Atmospheric Revitalization Pressure Control Subsystem (ARPCS) provides oxygen partial pressure and total pressure control for the habitable atmosphere of the Shuttle for either a one atmosphere environment or an emergency 8 PSIA mode. It consists of a Supply Panel, Control Panel, Cabin Pressure Relief Valves and Electronic Controllers. The panels control and monitor the oxygen and nitrogen supplies. The cabin pressure relief valves protect the habitable environment from overpressurization. Electronic controllers provide proper mixing of the two gases. This paper describes the ARPCS, addresses the changes in hardware that have occurred since the inception of the program; the performance of this subsystem during STS-1 and STS-2; and discusses future operation modes.

Walleshauser, J. J.↗