Search NASA⌕ Search

SEARCH · Search NASA

Results for “Superstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Ultraviolet photoelectron spectroscopic study of boron adsorption and surface segregation on Si(111)

The adsorption and surface segregation behavior of elemental boron (B) deposited on Si(111) have been studied by ultraviolet photoelectron spectroscopy and accompanying reflection high-energy electron diffraction as a function of the B coverage (c{sub B}) and annealing temperature (T). Our results clearly demonstrate an effective incorporation of B into subsurface sites at T > 800 K and formation of a well-ordered ({radical}(3)x{radical}(3))R30 deg. surface superstructure. Thereby, a critical c{sub B} of about 0.6 monolayers (ML) was determined for different conditions to prevent surface defects resulting from Si dangling bonds, which appear as surface states at 0.4 eV below the Fermi level. Annealing of the defect-free ({radical}(3)x{radical}(3))R30 deg. superstructure covered by several MLs Si at T{>=} 1040 K results in a renewal of the perfect B-induced Si surface structure, even after several deposition and annealing cycles. This indicates a dominance of B surface segregation over bulk diffusion. Significant B bulk diffusion commences only above 1100 K. Differences were found for spectra obtained for the B-induced surface structures formed after deposition and surface segregation, respectively. An additional surface state appeared at 2.1 eV below the Fermi level after deposition of 0.6 ML B. The state could be attributed to boron-boron interaction due to the presence of small clusters at the surface. This surface state did not disappear after high-T annealing and was not observed for lower c{sub B} and after B surface segregation, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlations of crystallographic defects and anisotropy with magnetotransport properties in Fe x TaS 2 single crystals ( 0.23 ≤ x ≤ 0.35 )

Very large magnetoresistance discovered in single crystals of the ferromagnetic Fe-intercalated transition metal dichalcogenide, Fe 0.28 TaS 2 was attributed to the deviation of the Fe concentration from commensurate values (x = 1/4 or 1/3), which caused magnetic moment misalignments. Here we report a study of Fe x TaS 2 crystals with 0:23 ≤ x ≤ 0:35, demonstrating that crystallographic defects lead to spin disorder, which correlates with magneto-transport properties such as switching magnetic fi eld HS, magnetoresistance MR, and even zero-field resistivity ρ0 and temperature coefficient A in ρ(T) = ρ 0 + AT 2 : The ordering temperature T C and Weiss temperature θ W are maximized at the superstructure composition x = 1/4, while H s , MR, ρ 0 , and A are minimum. Conversely, at a composition intermediate between the superstructure compositions x = 1/4 and 1/3, the corresponding magneto-transport properties reach local maxima.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Progress on the Development of a Superconducting Connection for Niobium Cavities

The availability of a superconducting connection between adjacent niobium radio-frequency (RF) cavities with the capability to carry up to 30 mT of the magnetic flux would be particularly of great benefit to layouts of long accelerators like the International Linear Collider (ILC). It would shorten the distances between structures and therefore the total length of an accelerator with the associated cost reductions. In addition, the superconducting connection would be ideal for a superstructure – two multi-cell cavities connected through a half wavelength long beam pipe providing the coupling. Two single-cell niobium cavities have been designed with Nb-1Zr flanges welded to one of the irises to allow a connection between them with a niobium gasket. A transition to the normal-conducting state of the connection due to the applied RF field causes a reduction of the cavities’ quality factor. The cavity design will be presented in this contribution along with possible choices of materials for the joint.

43 PARTICLE ACCELERATORS↗

Structural phase transition in crystals of the molecular conductor {alpha}'-(BDH-TTP){sub 6}[Hg(SCN){sub 3}][Hg(SCN){sub 4}]

Single crystals of the organic conductor {alpha}'-(BDH-TTP){sub 6}[Hg(SCN){sub 3}][Hg(SCN){sub 4}] are studied by low-temperature X-ray diffraction at 100-300 K. It is shown that, in the temperature range 250-200 K, the compound undergoes a phase transition, which is accompanied by the appearance of superstructure reflections and a rapid increase in their intensity due to the partial anion and cation ordering. The superstructure is observed down to a temperature of 100 K, at which the set of diffraction data is collected. The temperature dependence of the electrical resistance exhibits a minimum in the range of the structural transition temperature. Under a pressure of up to 10 kbar, the general behavior of the dependence remains unchanged and only the minimum is shifted toward the low-temperature range. The phase transition is completely reversible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron diffraction study of the formation of ordered antiphase domains in cubic titanium carbide TiC{sub 0.60}

A series of superstructural reflections (described within the sp. gr. Fd3m) are found to be split into three symmetric parts in the neutron powder diffraction pattern of titanium carbide TiC{sub 0.60} annealed at a temperature of 600 Degree-Sign C. No splitting of superstructural reflections is observed in the neutron diffraction pattern of TiC{sub 0.60} annealed at relatively high temperatures (780 Degree-Sign C). This phenomenon can be explained by that fact that the ordering of carbon atoms at relatively high temperatures (780 Degree-Sign C) is accompanied by the formation of randomly oriented rather large antiphase domains (APDs) (450 A). At relatively low temperatures (600 Degree-Sign C), stacking faults arise in the arrangement of partially ordered carbon atoms. In this case, relatively small ordered APDs (290 A) are formed, along with disordered ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The disorder-order transition in cubic vanadium monoxide with vacancies in the metal sublattice

The disorder-order transition in cubic vanadium monoxide VO{sub y} (y = 1.29, 1.30) possessing a B1 type structure and containing vacancies only in the metal sublattice has been studied by X-ray diffraction and symmetry analyses. It is established that the formation of a tetragonal (space group I4{sub 1}/amd) ordered V{sub 52}O{sub 64} phase in cubic vanadium monoxide VO{sub y} proceeds in the form of the first-order phase transition via a channel involving 22 nonequivalent superstructural vectors of four stars ({l_brace}k{sub 10}{r_brace}, {l_brace}k{sub 4}{r_brace}, {l_brace}k{sub 3}{r_brace}, and {l_brace}k{sub 2}{r_brace}). The distribution function of V atoms in the tetragonal V{sub 52}O{sub 64} superstructure is calculated, and it is found that the real ordered V{sub 51.6}O{sub 64} phase exhibits significant atomic displacements. The boundaries of the domain of existence of the V{sub 52}O{sub 64} phase at 54-60% O are determined in the phase diagram of the V-O system.

36 MATERIALS SCIENCE↗

Relationship between short- and long-range orders in nonstoichiometric titanium monoxide (TiO{sub y})

The relationship between the short- and long-range orders in various phases of nonstoichiometric titanium monoxide (TiO{sub y}) has been analyzed for the first time. The types of the local environment of lattice sites in the metal and nonmetal (oxygen) sublattices of Ti{sub 5}O{sub 5}, Ti{sub 3}O{sub 2}, Ti{sub 2}O{sub 3}, and Ti{sub 4}O{sub 5} superstructures are described. It is established that, in phases where ordering takes place simultaneously in both sublattices, all parameters of the superstructural short-range order determining the positions of atoms and vacancies in the first three coordination spheres can be uniquely expressed via the long-range order parameters. If the ordering takes place only in one sublattice, then five of the six short-range order parameters vanish. It is shown that, using data on the maximum absolute values of six short-range order parameters and on the fractions of occupied atomic positions in titanium and oxygen sublattices, it is possible to predict the type of ordered phase expected to form in the nonstoichiometric titanium monoxide TiO{sub y}.

36 MATERIALS SCIENCE↗

Formation of a Stepped Si(100) Surface and Its Effect on the Growth of Ge Islands

The transition from a two-domain to one-domain surface on a Si(100) substrate is investigated. It is demonstrated using reflection high-energy electron diffraction that at a temperature of 600°C and a deposition rate of 0.652 Å/s onto a Si(100) substrate pre-heated to 1000°C and inclined at an angle of 0.35°C to the plane, a series of reflections from the 1 × 2 superstructure completely vanishes at a constant flow of Si. This is attributed to the transition of the surface from monoatomic to diatomic steps. At growth rates lower than 0.652 Å/s, the transition from a two-domain to one-domain surface is also observed; with a decrease in the growth rate, the intensity ratio I{sub 2×1}/I{sub 1×2} decreases and the maximum of the dependences shifts toward lower temperatures. The complete vanishing of the series of superstructural reflections after preliminary annealing at a temperature of 700°C is not observed; this series only vanishes after annealing at 900 and 1000°C. The growth of Ge islands on a Si(100) surface preliminary annealed at a temperature of 800°C is studied. It is shown that the islands tend to nucleate at the step edges. A mechanism of Ge island ordering on the Si(100) surface is proposed.

36 MATERIALS SCIENCE↗

On Possible States of the Crystal Structure Preceding to a Phase Transition in Zn{sub 1 –} {sub x}V{sub x}Se (0.01 ≤ x ≤ 0.10) Crystals

The systematic new formations observed in the reciprocal lattice of the cubic structural modification of a II–VI compound are characterized using a detailed neutron diffraction study of bulk semiconducting ZnSe crystals with an increased vanadium content. Direct evidence that the additional sites k = (1/3 1/3 1/3) 2π/a (k is the wave vector and a is cubic unit cell parameter) observed by neutron scattering in the crystals, in the case when they belong to mutually penetrated rotated sublattices, contain a superstructure contribution formed by short-wave deformation, is obtained for the first time. This structure state is determined as a pretransition to the concentration fcc–hcp phase transformation, and the basis functions that allow one to analyze atomic displacements, the correlation between which create distortion-type superstructures, are indicated for the transition through one-arm channel, considering the transitions by the star of wave vector k{sub 5} of the fcc lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Peculiarities of the Intermediate Phase in Zr-Rich Lead Zirconate Titanate

This paper presents the results of X-ray diffraction studies on a single crystal of lead zirconate titanate PbZr{sub 0.993}Ti{sub 0.007}O{sub 3} in the region of existence of an intermediate ferroelectric phase. In addition to the known superstructure reflections of the M type q{sub M} = {(1/2),(1/2),0} and the first-order satellite reflections q{sub M} + {δ, δ, δ}, unknown second-order satellites have been observed near q{sub M} and near the Bragg reflections. Structural model of regular system of antiphase domains is used for diffraction calculation. The model is shown to describe the first- and second-orders satellite reflections in the vicinity of q{sub M}, but it cannot explain the appearance of satellites around the main Bragg peaks. A possible origin of the system of the superstructures observed in the intermediate phase is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substructure of Intermetallic Thin-Film Cu{sub 3}Sn

The crystalline structure of intermetallic Cu{sub 3}Sn synthesized by successively condensing thin layers of copper and tin on a substrate at 150°C has been studied. Cu{sub 3}Sn compound exists in a very narrow homogeneity range and has a long-period close-packed ordered D0{sub 19} superstructure. It has been found that the crystal lattice exhibits many slip traces associated with dislocation motion. The dislocation motion is due to the stressed state of the crystal, which can be characterized as uniform extension. Electron micrographs show that slip traces in the Cu{sub 3}Sn crystal are parallel to the ( 1-bar 1-bar 21) and (11 2-bar 1) planes belonging to pyramidal slip system II, which is a main slip system along with pyramidal and basal ones. Slip traces result from the motion of partial dislocations, as indicated by the amount of slip, which is equal to half the interplanar distance. Since the crystal is ordered, slip is accomplished by a pair of superpartial dislocations and a slip trace may be a superstructural or complex stacking fault.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Changes in physical properties of 4C pyrrhotite (Fe 7 S 8 ) across the 32 K Besnus transition

Pyrrhotite, Fe 7 S 8 , is a common sulfide mineral in the Earth’s crust and mantle, as well as in a range of meteorites and is of interest to a wide variety of disciplines including economic geology, geophysics, and material science. The 4C variety of pyrrhotite shows a dramatic change in magnetic properties at T ≈ 30 K, known as the Besnus transition. Although this transition is frequently used to detect pyrrhotite in geologic samples, the underlying mechanism driving the transition has not yet been identified. This study presents a high-resolution view of the changes in heat capacity, magnetic, and electronic properties of a natural single crystal of nearly pure, monoclinic 4C pyrrhotite across the Besnus transition. Contrary to previous studies, all of these properties show clear evidence of the Besnus transition, specific heat, in particular, revealing a clear transition at 32 K, apparently of second-order nature. Small-angle neutron scattering data are also presented, demonstrating an unusual change in short-range magnetic scattering at the transition. Furthermore, a magnetic field dependence of the transition temperature can be seen in both induced magnetization and electrical resistivity. These new observations help narrow the possible nature of the phase transition, clearly showing that interactions between intergrown coexisting 4C and 5C* superstructures, as suggested in some literature, are not necessary for the Besnus transition. In fact, the changes seen here in both the specific heat and the electronic transport properties are considerably larger than those seen in samples with intergrown superstructures. To further constrain the mechanism underlying the Besnus transition, we identify five separate potential models and evaluate them within the context of existing observations, proposing experimental approaches that may help resolve ongoing ambiguities.

58 GEOSCIENCES↗

Numerical Modeling of the Lake Mary Road Bridge for Foundation Reuse Assessment

This project uses numerical techniques to assess the structural integrity and capacity of the bridge foundations and, as a result, reduces the risk associated with reusing the same foundation for a new superstructure. Nondestructive test methods of different types were used in combination with the numerical modeling and analysis. The onsite tests included visual inspection, tomography, ground penetrating radar, drilling boreholes and coreholes, and the laboratory tests on recovered samples. The results were utilized to identify the current geometry of the structure with foundation, including the hidden geometry of the abutments and piers, and soil and foundation material properties. This data was used to build the numerical models and run computational analyses on a high performance computer cluster to assess the structural integrity of the bridge and foundations including the suitability of the foundation for reuse with a new superstructure and traffic that will increase the load on the foundations. Computational analysis is more cost-effective and gives an advantage of getting more detailed knowledge about the structural response. It also enables to go beyond non-destructive testing and find the failure conditions without destroying the structure under consideration.

foundation reuse↗

43-0434 Bridge Inspection Report 2022

This report covers the inspection findings for the Routine Inspection of the Omega Bridge conducted on September 23-25, 2022 and the Fracture Critical Member (FCM) Inspection conducted on June 26-27, 2021. Note that due to complications with the under-bridge access unit, portions of the Routine Inspection and the entire FCM Inspection could not be completed in 2022. As a result, the superstructure condition reported herein is based on the 2021 inspection whereas the deck and substructure conditions are based on the 2022 inspection. The superstructure condition will be updated when the inspection is completed in 2023. The inspections were completed according to the standards referenced in EXHIBIT “D” SCOPE OF WORK AND TECHNICAL SPECIFICATIONS including the National Bridge Inspection Standards (23 CFR Part 650, dated 12/14/2004) and other FHWA, NMDOT, and AASHTO codes and standards.

42 ENGINEERING↗

CFD and systems engineering to minimize membrane-based carbon capture costs

In this study, we propose a superstructure for membrane-based carbon capture, addressing these challenges through the formulation of an optimization problem. The case study considers a flue gas with a flowrate of 1000 mol/s and a 30 % CO2 (molar basis), which is representative of steel plants. Reduced models, derived from rigorous CFD simulations of membrane modules, are utilized to enhance the efficiency of the optimization process. The reduced model includes specific input variables such as inlet flow rate, retentate and permeate pressures, and inlet CO2 concentration; while the CO2 recovery and purity in the permeate side are considered as output variables. In this way, we exploit the information from the CFD simulations in the superstructure, aiding in the selection of the optimal configuration for the multi-stage membrane process. The results underscore the efficiency of a multi-stage membrane design, showing capture costs around 45 $/t-CO2.

Pedrozo, Hector A.↗

Design and Optimization of Processes for Recovering Rare Earth Elements from End-of-Life Hard Disk Drives

In this poster, we first provide motivation for why rare earth elements as rare earth permanent magnets (REPM) are increasing in demand. We then highlight some of the recent work that has been done by several national labs (National Renewable Energy Laboratory (NREL), Environmental Protection Agency (EPA), Critical Minerals Institute (CMI)) on recycling rare earth elements from end-of-life hard disk drives (EOL). Then, we mention our long-term plan to design a feedstock agnostic process to recover rare earth elements as rare earth oxides from many different EOL products at once. Next, we discuss how we quantified the rare earth elements available for recycling from EOL hard disk drives from consumer desktops and laptops. We then discuss how we used superstructure optimization to design the optimal pathway. The proposed superstructure was modeled as a MILP optimization problem, selecting the net present value as the objective function. Costing data from the literature was used to inform this model whenever possible. However, due to the novelty of this research area, data were often unavailable, thus requiring the generation of flowsheets implemented in Aspen Plus.

Laliwala, Chris↗

Nepheline: Structure of Three Samples from the Bancroft Area, Ontario, Obtained using Synchrotron High-Resolution Powder X-Ray Diffraction

The crystal structure of three samples of nepheline (ideally, K{sub 2}Na{sub 6}[Al{sub 8}Si{sub 8}O{sub 32}]) from the Bancroft area of Ontario (1a, b: Egan Chute, 2: Nephton, and 3: Davis Hill), each with different types of superstructure reflections, has been studied using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and Rietveld structure refinement. The samples have different origins. The structure was refined in space group P6{sub 3}. The R{sub F}{sup 2} index, number of unique observed reflections, pseudohexagonal subcell parameters, and site-occupancy factor (sof) for the K site are as follows: Sample 1b: R{sub F}{sup 2} = 0.0433, N{sub obs} = 1399, a = 9.99567(1), c = 8.37777(1) {angstrom}, V = 724.907(2) {angstrom}{sub 3}, and K (sof) = 0.716(1). Sample 2: R{sub F}{sup 2} = 0.0669, N{sub obs} = 1589, a = 10.00215(1), c = 8.38742(1) {angstrom}, V = 726.684(1) {angstrom}{sub 3}, and K (sof) = 0.920(1). Sample 3: R{sub F}{sup 2} = 0.0804, N{sub obs} = 1615, a = 9.99567(1), c = 8.37873(1) {angstrom}, V = 724.991(1) {angstrom}{sub 3}, and K (sof) = 0.778(2). Sample 2 has the largest sof for K and the largest volume. The satellite reflections in the three nepheline samples were observed in the HRPXRD traces and give rise to different incommensurate superstructures. The Al and Si atoms in the T{sub 3} and T{sub 4} sites are ordered differently in the three samples, which may indicate the presence of a domain structure based on Al-Si order. The positions for the Al and Si atoms were interchanged in two samples because of the resulting <T-O> distances. The slight excess of Si over Al atoms, characteristically encountered in well-analyzed samples of nepheline, is reflected in the <T-O> distances.

58 GEOSCIENCES↗