Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Predicting lake surface water phosphorus dynamics using process-guided machine learning

Phosphorus (P) loading to lakes is degrading the quality and usability of water globally. Accurate predictions of lake P dynamics are needed to understand whole-ecosystem P budgets, as well as the consequences of changing lake P concentrations for water quality. However, complex biophysical processes within lakes, along with limited observational data, challenge our capacity to reproduce short-term lake dynamics needed for water quality predictions, as well as long-term dynamics needed to understand broad scale controls over lake P. Here we use an emerging paradigm in modeling, process-guided machine learning (PGML), to produce a phosphorus budget for Lake Mendota (Wisconsin, USA) and to accurately predict epilimnetic phosphorus over a time range of days to decades. In our implementation of PGML, which we term a Process-Guided Recurrent Neural Network (PGRNN), we combine a process-based model for lake P with a recurrent neural network, and then constrain the predictions with ecological principles. We test independently the process-based model, the recurrent neural network, and the PGRNN to evaluate the overall approach. The process-based model accounted for most of the observed pattern in lake P; however it missed the long-term trend in lake P and had the worst performance in predicting winter and summer P in surface waters. The root mean square error (RMSE) for the process-based model, the recurrent neural network, and the PGRNN was 33.0 μg P L -1 , 22.7 μg P L -1 , and 20.7 μg P L -1 , respectively. All models performed better during summer, with RMSE values for the three models (same order) equal to 14.3 μg P L -1 , 10.9 μg P L -1 , and 10.7 μg P L -1 . Although the PGRNN had only marginally better RMSE during summer, it had lower bias and reproduced long-term decreases in lake P missed by the other two models. For all seasons and all years, the recurrent neural network had better predictions than process alone, with root mean square error (RMSE) of 23.8 μg P L -1 and 28.0 μg P L -1 , respectively. The output of PGRNN indicated that new processes related to water temperature, thermal stratification, and long term changes in external loads are needed to improve the process model. By using ecological knowledge, as well as the information content of complex data, PGML shows promise as a technique for accurate prediction in messy, real-world ecological dynamics, while providing valuable information that can improve our understanding of process.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Hydration and reaction mechanisms on sodium silicate glass surfaces from molecular dynamics simulations with reactive force fields

Recent development of reactive force fields have enabled molecular dynamics simulations of interactions between silicate glasses and water at the atomistic scale. While multicomponent silicate glasses encompass a wide variety of compositions and properties, one common structural feature in these glasses is the combination of the network structure that is made up of silica tetrahedra linked through corner sharing interspersed with network modifiers like alkali and alkaline-earth ions that break up the Si–O–Si linkages by forming nonbridging oxygen. In reactions with water, ion exchange between alkali ions in the glass and proton or hydronium in the solution, as well as hydrolysis reaction of the Si–O–Si linkages and subsequent silanol formation, is observed and well documented. Furthermore, we have used a set of recently developed reactive force field to investigate the reactions between water and the surfaces of silica and sodium silicate glasses of different compositions for reactions up to 8 nanoseconds. Our results indicate sodium leaching into water and diffusion of water molecules up to 25 Å into the glass surface. We examined the structural and compositional changes inside the glass and around the diffused ions and use these to explain the rates of silanol formation at the surface. We also observed proton transport in the glass which has an indirect influence on the silanol formation rates. While the surface of the glass was rough to start with, it undergoes further modification into a hydrated gel-like structure in the glass for up to 5 Å in the higher alkali containing glasses. It was found that the leached sodium ions remain close to the interface and that fragments of silicate network from the surface is capable of dislodging from the bulk glass and enter the aqueous solution. These simulations thus provide insights into the formation and structure of an alteration layers commonly observed in multicomponent silicate glasses corroded in aqueous solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Flexible and Extensive Platinum Ion Gel Condensers for Programmable Catalysis

Catalytic condensers composed of ion gels separating a metal electrode from a platinum-on-carbon active layer were fabricated and characterized to achieve more powerful, high surface area dynamic heterogeneous catalyst surfaces. Ion gels comprised of poly(vinylidene difluoride)/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide were spin coated as a 3.8 μm film on a Au surface, after which carbon sputtering of a 1.8 nm carbon film and electron-beam evaporation of 2 nm Pt clusters created an active surface exposed to reactant gases. Electronic characterization indicated that most charge condensed within the Pt nanoclusters upon application of a potential bias, with the condenser device achieving a capacitance of ∼20 μF/cm 2 at applied frequencies of up to 120 Hz. The maximum charge of ∼10 14 |e – | cm –2 was condensed under stable device conditions at 200 °C on catalytic films with ∼10 15 sites cm –2 . Grazing incidence infrared spectroscopy measured carbon monoxide adsorption isobars, indicating a change in the CO* binding energy of ∼19 kJ mol –1 over an applied potential bias of only 1.25 V. Condensers were also fabricated on flexible, large area Kapton substrates allowing stacked or tubular form factors that facilitate high volumetric active site densities, ultimately enabling a fast and powerful catalytic condenser that can be fabricated for programmable catalysis applications.

Catalysis↗
DOE OSTI2023

High-speed X-ray study of process dynamics caused by surface features during continuous-wave laser polishing

During high-speed X-ray imaging of laser surface polishing experiments of specimens of 316L stainless steel at Argonne National Lab's Advanced Photon Source, it was discovered that the induced keyhole changes shape and dimensions while crossing an engineered surface feature without altering process parameters. It was observed that the post-surface feature keyhole was deeper than that of the pre surface feature keyhole. Here, this work reports on the first in-situ observation of the effect of localized surface geometry on underlying melt pool behavior. This has implications for defect formation mechanisms during laser melting processes that rely on melt pool geometry.

42 ENGINEERING↗
DOE OSTI2023

Carrier Recombination Dynamics of Surface-Passivated Epitaxial (100)Ge, (110)Ge, and (111)Ge Layers by Atomic Layer Deposited Al2O3

Germanium (Ge) and its heterostructures with compound semiconductors offer a unique optoelectronic functionality due to its pseudo-bandgap nature, that can be transformed to a direct bandgap material by providing strain and/or mixing with tin. Moreover, two crystal surfaces, (100)Ge and (110)Ge, that are technologically important for ultralow power fin or nanosheet transistors, could offer unprecedented properties with reduced surface defects after passivating these surfaces by atomic layer deposited (ALD) dielectrics. In this work, the crystallographically oriented epitaxial Ge/AlAs heterostructures were grown and passivated with ALD Al2O3 dielectrics, and the microwave photoconductive decay (u-PCD) technique was employed to evaluate carrier lifetimes at room temperature. The X-ray photoelectron spectroscopy analysis reveals no role of orientation effect in the quality of the ALD Al2O3 dielectric on oriented Ge layers. The carrier lifetimes measured using the u-PCD technique were benchmarked against unpassivated Ge/AlAs heterostructures. Excitation wavelengths of 1500 and 1800 nm with an estimated injection level of ~10^13 cm-3 were selected to measure the orientation-specific carrier lifetimes. The carrier lifetime was increased from 390 ns to 565 ns for (100)Ge and from 260 ns to 440 ns for (110)Ge orientations with passivation, whereas the carrier lifetime is almost unchanged for (111)Ge after passivation. This behavior indicates a strong dependence of the measured lifetime on surface orientation and surface passivation. The observed increase (>1.5x) in lifetime with Al2O3-passivated (100)Ge and (110)Ge surfaces is due to the lower surface recombination velocity compared to unpassivated Ge/AlAs heterostructures. The enhancement of carrier lifetime from passivated Ge/AlAs heterostructures with (100)Ge and (110)Ge surface orientations offers a path for the development of nanoscale transistors due to the reduced interface state density.

Al2O3↗
DOE OSTI2020

Probing the surface oxidation process in hexagonal boron nitride epilayers

Thermal neutron detectors based on hexagonal boron nitride ( h -BN) epilayers have demonstrated a record high efficiency among solid-state detectors at 58%. It was found that the performance of h -BN detectors is profoundly influenced by charge recombination at the surfaces. The dynamic process of surface oxidation in h -BN epilayers has been probed by x-ray photoelectron spectroscopy. The spectra of high-resolution (0.1 eV) scans indicated that the linewidth of the B 1s peak at 190.6 eV increased and the peak intensity decreased with an increase in exposure time in-air (t air ). The main B 1s peak at 190.6 eV evolved into multiple peaks at a higher binding energy position due to oxygen impurities tending to occupy nitrogen sites and form the B–O bond. Time constants of the oxidation process have been determined, revealing that the formation process of the B–O bond is very fast and within minutes in h -BN. The results suggest that reducing nitrogen vacancy generation during growth and employing surface treatment techniques would further improve the performance of h -BN devices.

2D materials↗
DOE OSTI2024

Surf-Deformer: Mitigating Dynamic Defects on Surface Code via Adaptive Deformation

In this paper, we introduce Surf-Deformer, a code deformation framework that seamlessly integrates adaptive defect mitigation functionality into the current surface code workflow. It crafts several basic deformation instructions based on fundamental gauge transformations, which can be combined to explore a larger design space than previous methods. This enables more optimized deformation processes tailored to specific defect situations, restoring the QEC capability of deformed codes more efficiently with minimal qubit resources. Additionally, we design an adaptive code layout that accommodates our defect mitigation strategy while ensuring efficient execution of logical operations. Our evaluation shows that Surf-Deformer outperforms previous methods by significantly reducing the end-to-end failure rate of various quantum programs by 35× to 70×, while requiring only about 50% of the qubit resources compared to the previous method to achieve the same level of failure rate. Ablation studies show that Surf-Deformer surpasses previous defect removal methods in preserving QEC capability and facilitates surface code communication by achieving nearly optimal throughput.

Yin, Keyi↗
NASA NTRS1976

Mars dynamics, atmospheric and surface properties - Determination from Viking tracking data

Approximately three months of radio tracking data from the Viking landers have been analyzed to determine the lander locations, the orientation of the spin axis of Mars, and a first estimate from Viking data of the planet's spin rate. Preliminary results have also been obtained for atmospheric parameters and radii at occultation points and for properties of the surface in the vicinity of lander 1.

Michael, W. H., Jr.↗
NASA NTRS1990

The Spacelab J mission

This paper describes Spacelab J (SL-J), its mission characteristics, features, parameters and configuration, the unique nature of the shared reimbursable cooperative effort with the National Space Development Agency (NASDA) of Japan and the evolution, content and objectives of the mission scientific experiment complement. The mission is planned for launch in 1991. This long module mission has 35 experiments from Japan as well as 9 investigations from the United States. The SL-J payload consists of two broad scientific disciplines which require the extended microgravity or cosmic ray environment: (1) materials science such as crystal growth, solidification processes, drop dynamics, free surface flows, gas dynamics, metallurgy and semiconductor technology; and (2) life science including cell development, human physiology, radiation-induced mutations, vestibular studies, embryo development, and medical technology. Through an international agreement with NASDA, NASA is preparing to fly the first Japanese manned, scientific, cooperative endeavor with the United States.

Cremin, J. W.↗
DOE OSTI2021

SMART Perovskite Growth: Enabling a Larger Range of Process Conditions

Cost-effective, high-throughput industrial applications of metal-halide perovskites require a highly tolerant method (i.e., wide process window) that produces high-quality materials with a short annealing time. Here, we introduce a Seed Modulation for ARTificially controlled nucleation (SMART) process that enables rapid fabrication of high-quality perovskite films under a wide set of initial input parameters. Additionally, we characterized the thin-film evolution from the perspective of crystallinity, surface potential, diffusivity, surface carrier dynamics, and interfacial recombination. We find that surface and subsurface defects primarily determine the performance of materials and devices. By modulating the seeds for perovskite nucleation, we were able to improve the overall crystallization. We achieved a >20% power conversion efficiency using only a 5 min annealing step, and we found that the annealing window is widened such that differing initial conditions achieve similar quality. Furthermore, we demonstrated reproducibility and performance improvement in larger-area perovskite cells by incorporating the SMART process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Theoretical Insights into Reaction-Induced Transformation and Tuning of Catalytic Behavior in Heterogenous Catalysis

Reaction-induced transformations in heterogenous catalysis represent diverse phenomena that challenge traditional views of static catalyst surfaces. From surface adsorbate dynamics, atomic rearrangements, to composition and phase transitions, these processes reveal the profound differences between idealized model systems under ultrahigh vacuum and the complex, evolving interfaces that govern real catalytic behaviors under reaction conditions. Here, this perspective reviews recent theoretical efforts to provide atomic-level mechanistic insights into significant reaction-induced transformations and their impact on catalytic activity and selectivity. It underscores the need for an integrated framework that combines predictive simulations with operando characterization to uncover active sites and mechanisms under realistic operating conditions. Achieving this requires accelerating existing simulations to fully capture diverse reaction-induced surface dynamics, enabling scalable and accurate modeling of catalysts as condition-dependent, dynamically evolving systems. Such approaches are critical to bridge the gap between theory and practice, offering a pathway to more impactful and predictive catalyst design.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2005

The Influence of Dynamic Contact Angle on Wetting Dynamics

When surface tension forces dominate, and regardless of whether the situation is static or dynamic, the contact angle (the angle the interface between two immiscible fluids makes when it contacts a solid) is the key parameter that determines the shape of a fluid-fluid interface. The static contact angle is easy to measure and implement in models predicting static capillary surface shapes and such associated quantities as pressure drops. By contrast, when the interface moves relative to the solid (as in dynamic wetting processes) the dynamic contact angle is not identified unambiguously because it depends on the geometry of the system Consequently, its determination becomes problematic and measurements in one geometry cannot be applied in another for prediction purposes. However, knowing how to measure and use the dynamic contact angle is crucial to determine such dynamics as a microsystem throughput reliably. In this talk we will present experimental and analytical efforts aimed at resolving modeling issues present in dynamic wetting. We will review experiments that show the inadequacy of the usual hydrodynamic model when a fluid-fluid meniscus moves over a solid surface such as the wall of a small tube or duct. We will then present analytical results that show how to parametrize these problems in a predictive manner. We will illustrate these ideas by showing how to implement the method in numerical fluid mechanical calculations.

Rame, Enrique↗