Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis and processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

PtRu Catalysts on Nitrogen-Doped Carbon Nanotubes with Conformal Hydrogenated TiO 2 Shells for Methanol Oxidation

The methanol oxidation reaction (MOR) is the limiting factor in direct methanol fuel cells (DMFC). There is an urgent need to improve the catalytic activity and stability of MOR catalysts. This study reports a highly active PtRu catalyst for MOR based on a hybrid multifunctional catalyst support consisting of a conformal amorphous hydrogenated TiO 2 shell wrapped around the oxygenated N-doped carbon nanotube core, denoted as PtRu/TiO 2 / ONCNT-400. Both the TiO 2 shell and the subsequent PtRu nanoparticles are deposited by a rapid microwave-assisted synthesis processes. The hydrogenated TiO 2 shell is found to exhibit a strong interaction with the deposited PtRu catalyst nanoparticles and effectively prevent them from agglomeration during the postdeposition thermal annealing to form more active crystalline PtRu alloy catalysts. In addition, the defective hydrogenated TiO 2 shell enhances the PtRu catalyst activity by the synergistic effects of partial charge transfer from TiO 2 to PtRu and high oxophilicity, which improves the kinetics of oxidation of poisonous CO intermediate to CO 2 . The mass activity for MOR and long-cycling stability of the PtRu/TiO 2 /ONCNT-400 catalyst surpass the two benchmark commercial PtRu/C catalysts from Johnson Matthey (JM) and Tanaka KiKinzoku (TKK), respectively. Furthermore, the results demonstrate that PtRu/TiO 2 /ONCNT-400 can serve as an efficient catalyst for MOR in DMFC.

36 MATERIALS SCIENCE↗

Morphology-controlled hydrothermal synthesis of MnCO{sub 3} hierarchical superstructures with Schiff base as stabilizer

Graphical abstract: MnCO3 microcrystals with hierarchical superstructures were synthesized by using the CO2 in atmosphere as carbonate ions source and Schiff base as shape guiding-agent in water/ethanol system under hydrothermal condition. Highlights: {yields} The most interesting in this work is the use of the greenhouse gases CO{sub 2} in atmosphere as carbonate ions source to precipitate with Mn{sup 2+} for producing MnCO{sub 3} crystals. {yields} This work is the first report related to the small organic molecule Schiff base as shape guiding-agent to produce different MnCO{sub 3} hierarchical superstructures. {yields} We are controllable synthesis of the MnCO{sub 3} hierarchical superstructures such as chrysanthemum, straw-bundle, dumbbell and sphere-like microcrystals. {yields} The as-prepared MnCO{sub 3} could be used precursor to fabricate the Mn{sub 2}O{sub 3} hierarchical superstructures after thermal decomposition at high temperature. -- Abstract: MnCO{sub 3} with hierarchical superstructures such as chrysanthemum, straw-bundle, dumbbell and sphere-like were synthesized in water/ethanol system under environment-friendly hydrothermal condition. In the synthesis process, the CO{sub 2} in atmosphere was used as the source of carbonate ions and Schiff base was used as shape guiding-agent. The different superstructures of MnCO{sub 3} could be obtained by controlling the hydrothermal temperature, the molar ratio of manganous ions to the Schiff base, or the volume ratio of water to ethanol. A tentative growth mechanism for the generation of MnCO{sub 3} superstructures was proposed based on the rod-dumbbell-sphere model. Furthermore, the MnCO{sub 3} as precursor could be further successfully transferred to Mn{sub 2}O{sub 3} microstructure after heating in the atmosphere at 500 {sup o}C, and the morphology of the Mn{sub 2}O{sub 3} was directly determined by that of the MnCO{sub 3} precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural and optical properties of BaMoO{sub 4}:Eu{sup 3+} shuttle like phosphors

Graphical abstract: - Highlights: • BaMoO{sub 4}:Eu{sup 3+} phosphors were synthesized by a facile synthesis route. • PL and CL spectra showed dominant emissions due to ({sup 5}D{sub 0} → {sup 7}F{sub 2}) hypersensitive transitions. • The excitation wavelengths in the UV-B region make BaMoO{sub 4}:Eu{sup 3+} phosphors as a good candidate in the red region for the development of UV-based white LEDs. • PL and CL spectra showed similar CIE values close to the commercially available Y{sub 2}O{sub 3}:Eu{sup 3+} phosphors. - Abstract: Eu{sup 3+} ions doped BaMoO{sub 4} phosphor samples were synthesized by a facile synthesis process. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by taking the scanning electron microscope and transmission electron microscope images and confirmed the formation of shuttle like particles with perpendicular protrusions in the middle of the particle. The single crystalline nature of the phosphors was confirmed by the selected area electron diffraction pattern. The photoluminescence (PL) properties of the Eu{sup 3+} ions doped samples revealed good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (between 280 and 315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra. The calculated CIE values based on the PL and CL spectra were almost similar and confirmed the rich red emission.

36 MATERIALS SCIENCE↗

A simple facile approach to large scale synthesis of high specific surface area silicon nanoparticles

An inexpensive, facile, and high throughput synthesis of silicon nanoparticles was achieved by the mechano-chemical reduction reaction of magnesium silicide (Mg{sub 2}Si) and silicon monoxide (SiO) using a high energy mechanical milling (HEMM) technique followed by acid leaching. Characterization of the resultant product using X-Ray diffraction, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and surface area analyses was performed at various stages of the synthesis process. XRD patterns show that the final product formed is single phase silicon and the nanocrystalline nature was confirmed by the shifted transverse optical (TO) band, characteristic of nc-Si determined by Raman analysis. SEM and TEM shows the presence of particles of different sizes in the range of few nanometers to agglomerates of few microns which is consistent with products obtained from mechanical milling. BET measurements show a very high specific surface area (SSA) of ∼190 m{sup 2}/g obtained due to acid leaching which is also validated by the porous nature of the particles confirmed by the SEM images. - Graphical abstract: Schematic showing the large scale production of nanosized silicon and BET surface area of the product formed at various stages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of microwave-assisted sintering on dielectric properties of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramic

In this present work, CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) was synthesized by conventional solid-state reaction technique. The synthesis process was carried out in two phases; by conventional process (calcination and sintering at 1080°C for 10 hours) and phase II involves the micro assisted pre sintering of conventionally calcined CCTO for very short soaking time of 30 min at 1080°C in a microwave furnace followed by sintering at 1080°C for 10 hours in conventional furnace. X-ray diffraction (XRD) patterns confirmed the formation of single phase ceramic. Dielectric properties were studied over the frequency range from 50Hz -5MHz at temperatures (273K-343K). It was observed that pre- microwave sintering enhance the dielectric constant values from 10900 to 11893 and respectively reduces the dielectric loss values from 0.49 to 0.34 at room temperature(1 KHz). CCTO ceramics which are found desirable for many technological applications. The effect is more pronounced at low frequencies of applied electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetismo Molecular (Molecular Magentism)

The new synthesis processes in chemistry open a new world of research, new and surprising materials never before found in nature can now be synthesized and, as a wonderful result, observed a series of physical phenomena never before imagined. Among these are many new materials the molecular magnets, the subject of this book and magnetic properties that are often reflections of the quantum behavior of these materials. Aside from the wonderful experience of exploring something new, the theoretical models that describe the behavior these magnetic materials are, in most cases, soluble analytically, which allows us to know in detail the physical mechanisms governing these materials. Still, the academic interest in parallel this subject, these materials have a number of properties that are promising to be used in technological devices, such as in computers quantum magnetic recording, magnetocaloric effect, spintronics and many other devices. This volume will journey through the world of molecular magnets, from the structural description of these materials to state of the art research.

36 MATERIALS SCIENCE↗

Synthesis of Ag{sub 2}S nanorods by biomimetic method in the lysozyme matrix

Graphical abstract: - Highlights: • Firstly, Ag{sub 2}S nanorods were synthesized by biomimetic method in the lysozyme solutions. • The study of the interaction between Ag{sup +} and the lysozyme. • Discussion of possible formation mechanism of Ag{sub 2}S nanorods. • The synthesis process of lyso-conjugated Ag{sub 2}S nanocrystals is facile, effective and environment friendly. - Abstract: Ag{sub 2}S nanorods were successfully synthesized by biomimetic route in the lysozyme solution at physiological temperature and atmospheric pressure. The transmission electron microscopy (TEM) images revealed that the prepared nanorods are uniform and monodisperse with homogeneous size about 50 nm in diameter and 150 nm in length. The optical property of Ag{sub 2}S nanocrystals was studied by the ultraviolet–visible (UV–vis) and photoluminescence (PL) spectroscopy, the results show that the products exhibit well-defined emission at 471 nm and 496 nm excited by 292 nm. The interaction of Ag{sup +}/Ag{sub 2}S with the lysozyme was investigated through Fourier transform infrared (FT-IR) spectroscopy, which shows that the cooperation effect of the lysozyme and Ag{sup +} could be responsible for the formation of as obtained Ag{sub 2}S nanorods.

36 MATERIALS SCIENCE↗

A robust ligand exchange approach for preparing hydrophilic, biocompatible photoluminescent quantum dots

Graphical abstract: - Highlights: • Aqueous CdSe/ZnS QDs were prepared using polymaleic anhydrides as capping ligand. • Effect of reaction temperature and time were systematically studied in the synthesis process. • Water-soluble QDs exhibited a good stability in physiological relevant environment. • The aqueous QDs were applied as biological probe to detect human embryonic stem cell. - Abstract: This paper describes a robust ligand exchange approach for preparing biocompatible CdSe/ZnS quantum dots (QDs) to make bioprobe for effective cell imaging. In this method, polymaleic anhydride (PMA) ligand are first used to replace original hydrophobic ligand (oleic acid) and form a protection shell with multiple hydrophilic groups to coat and protect CdSe/ZnS QDs. The as-prepared aqueous QDs exhibit small particle size, good colloidal stability in aqueous solutions with a wide range of pH, salt concentrations and under thermal treatment, which are necessary for biological applications. The use of this new class of aqueous QDs for effective cell imaging shows strong fluorescence signal to human embryonic stem cell, which demonstrate that PMA coated QDs are fully satisfied with the requirements of preparing high quality biological probe.

36 MATERIALS SCIENCE↗

Si-substituted hydroxyapatite nanopowders: Synthesis, thermal stability and sinterability

Synthetic hydroxyapatites incorporating small amounts of Si have shown improved biological performances in terms of enhanced bone apposition, bone in-growth and cell-mediated degradation. This paper reports a systematic investigation on Si-substituted hydroxyapatite (Si 1.40 wt%) nanopowders produced following two different conventional wet methodologies: (a) precipitation of Ca(NO{sub 3}){sub 2}.4H{sub 2}O and (b) titration of Ca(OH){sub 2}. The influence of the synthesis process on composition, thermal behaviour and sinterability of the resulting nanopowders is studied. Samples were characterised by electron microscopy, induced coupled plasma atomic emission spectroscopy, thermal analysis, infrared spectroscopy, N{sub 2} adsorption measurements, X-ray diffraction and dilatometry. Semicrystalline Si-substituted hydroxyapatite powders made up of needle-like nanoparticles were obtained, the specific surface area ranged between 84 and 110 m{sup 2}/g. Pure and Si-substituted hydroxyapatite nanopowders derived from Ca(NO{sub 3}){sub 2}.4H{sub 2}O decomposed around 1000 deg. C. Si-substituted hydroxyapatite nanopowders obtained from Ca(OH){sub 2} were thermally stable up to 1200 deg. C and showed a distinct decreased thermal stability with respect to the homologous pure sample. Si-substituted hydroxyapatites exhibited higher sintering temperature and increased total shrinkage with respect to pure powders. Nanostructured dense ceramics were obtained by sintering at 1100 deg. C Si-substituted hydroxyapatites derived from Ca(OH){sub 2}.

36 MATERIALS SCIENCE↗

Enhanced thermoelectric performance and novel nanopores in AgSbTe{sub 2} prepared by melt spinning

We report a melt-spinning spark-plasma-sintering synthesis process of the polycrystalline p-type material composed of AgSbTe{sub 2} coarse grains and evenly formed 5-10 nm pores that occur primarily on the surface of matrix grains. The formation mechanism of nanopores and their influences on the thermoelectric properties have been studied and correlated. Microstructure analysis shows that the as-prepared sample can be regarded as a nanocomposite of matrix and in situ generated nanopores evenly coated on matrix grains. For the single-phase component and the possible energy-filter effect caused by the nanopores, the electrical transport properties are improved. Moreover, the thermal conductivity is significantly reduced by strong phonon scattering effect resulted from the nanopores. The thermoelectric performance of the as prepared sample enhances greatly and a ZT of 1.65 at 570 K is achieved, increasing{approx}200% compared with the sample prepared by traditional melt and slow-cooling method. -- Graphical abstract: Representative nanostructure of AgSbTe{sub 2} sample (a) ribbons obtained after melt spinning (b) bulk AgSbTe{sub 2} material obtained after spark plasma sintering. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Functionalization of multi-walled carbon nanotubes using water-assisted chemical vapor deposition

A simple and novel method, water-assisted chemical vapor deposition (CVD) was developed to functionalize multi-walled carbon nanotubes (MWCNTs) during the synthesis process. The functionalized MWCNTs were characterized using Raman spectroscopy, XPS, TGA, NH{sub 3}-TPD, SEM and HR-TEM. It was found that new defects are introduced and the amount of acidic groups is increased on the MWCNT surface during the water-assisted CVD process. The amount of C-OH and C-O group on the MWCNT surface is found to be increased from 21.1% to 42% with water vapor assistance. Density functional theory (DFT) was employed to study the chemical behavior of water vapor molecule on the catalyst particle surface of Ni(1 1 1) cluster. Based on the experimental and DFT simulation results, a mechanism for functionalization of MWCNTs by water-assisted CVD is proposed. - Graphical abstract: Water is adsorbed and activated on Ni surface, then dissociated into OH and O species, followed by part of OH and O species desorbed from the surface. Finally, the desorbed OH and O species oxidize the unsaturated carbon atoms of carbon nanotubes, form defects and oxygen-containing groups. Highlights: Black-Right-Pointing-Pointer MWCNTs were functionalized by water-assisted CVD method. Black-Right-Pointing-Pointer Defects and weak-medium acidic sites were created on the MWCNT sidewalls. Black-Right-Pointing-Pointer Oxygen-containing groups in functionalized MWCNT were increased from 21.1% to 42%. Black-Right-Pointing-Pointer A mechanism for the influence of water vapor on MWCNTs was proposed.

36 MATERIALS SCIENCE↗

Improvement of the overall performances of LiMn{sub 2}O{sub 4} via surface-modification by polypyrrole

Graphical abstract: Polypyrrole(PPy) film has improved the rate performance of LiMn{sub 2}O{sub 4} efficiently due to its excellent conductivity. PPy@LiMn{sub 2}O{sub 4} could provide more energy under the higher power than pristine LMO. - Highlights: • The PPy layer on the surface of LMO particles hasn’t been studied in LiMn{sub 2}O{sub 4} so far. • The solvent in the synthesis process of PPy@LMO is absolute ethyl alcohol. • The differences of surface-modification between the PPy and PI for LMO. • The analyses of rate performances are through specific power. - Abstract: Polypyrrole (PPy) is an excellent conductive polymer and the study on its utilization in the surface modification of the LiMn{sub 2}O{sub 4} (LMO) is few. In this work, the structure, morphology and electrochemical performance of surface-modified LiMn{sub 2}O{sub 4} composites with PPy and polyimides (PI) were discussed. The crystal structure, chemical bonds and morphology were characterized through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), respectively. Moreover, the specific power and cycling performance were tested at room and high (55 °C) temperature. The PPy@LMO (surface-modified LMO composites with PPy) shows better performances than the pristine LMO. The addition of PPy not only weakens the corrosion caused by electrolyte, but also improves the discharge capacity at higher rates. The charge transfer resistance of the PPy@LMO is much lower than that of the pristine LMO after cycling.

36 MATERIALS SCIENCE↗

Effects of quartz particle size and water-to-solid ratio on hydrothermal synthesis of tobermorite studied by in-situ time-resolved X-ray diffraction

Hydrothermal synthesis process of tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) has been investigated by in-situ X-ray diffraction using high-energy X-rays from a synchrotron radiation source in combination with a purpose-build autoclave cell. Dissolution rates of quartz were largely affected by its particle size distribution in the starting mixtures. However, the composition (Ca/Si) of non-crystalline C-S-H at the start of tobermorite formation was identical regardless of the quartz dissolution rate. An effect of water-to-solid ratio (w/s) was investigated for samples using fine particle quartz. Tobermorite did not occur with w/s of 1.7 but occurred with w/s higher than 3.0. Surprisingly, however, the dissolution curves of quartz were nearly identical for all samples with w/s from 1.7 to 9, indicating that the dissolution rate is predominated by surface area. Possible reaction mechanism for tobermorite formation will be discussed in terms of Ca and/or silicate ion concentration in the liquid phase and distribution of Ca/Si in non-crystalline C-S-H. - Graphical abstract: Time-resolved XRD data set was obtained at up to 190 deg. C under a saturated steam pressure. Tobermorite (5CaO.6SiO{sub 2}.5H{sub 2}O) formation reaction was investigated in detail for several different starting materials. Highlights: > Hydrothermal formation of tobermorite was monitored by in-situ XRD. > Ca/Si of C-S-H at the start time of tobermorite formation was determined. > The Ca/Si value was identical regardless of the quartz particle size in the starting mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of ultrafine Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) pyrochlore oxides by stearic acid method

Stearic acid method (SAM) was developed to synthesize series of pyrochlore Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) nanocrystals. The synthesis process was monitored by X-ray diffraction, Thermal-gravimetric-differential thermal analysis and Fourier Transform InfraRed methods. Comparing with traditional solid-state reaction (SSR), Ln{sub 2}Ti{sub 2}O{sub 7} can be synthesized at relatively low temperature (700-800 deg. C) with shortened reaction time (2-4 h). The average particle size of Ln{sub 2}Ti{sub 2}O{sub 7} was greatly reduced (ca. 40 nm) and the BET surface area was increased (ca. 12 m{sup 2}/g) by using SAM. From the X-ray diffraction patterns, we found that Ln has an effect on the crystal structure of Ln{sub 2}Ti{sub 2}O{sub 7}, every lattice peak shifted to larger angle slightly with the increasing atomic number of Ln. Also, the lattice constant of Ln{sub 2}Ti{sub 2}O{sub 7} was calculated by Jade.5 and found it decreased along with the decrease of ionic radius of Ln{sup 3+}. The morphology of obtained Ln{sub 2}Ti{sub 2}O{sub 7} was determined by transmission electron microscopy technique. Results showed that the obtained Ln{sub 2}Ti{sub 2}O{sub 7} were all square-like and the interplanar distance of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) according to (111) plane was 0.65, 0.64, 0.63, and 0.62 nm respectively, which was measured from High Resolution Transmission Electron Microscopy images. Possible reason for this phenomenon was presented.

36 MATERIALS SCIENCE↗

Unordinary Ferromagnetic Phase Transitions in Mn- and Fe-doped Half-Heusler CoTiSb

Unordinary ferromagnetic character and high Curie temperature around 900 K have been detected for CoTi {sub 1−x}M{sub x}Sb (M = Mn and Fe, x = 0.1) multiphases systems. The synthesis process was carried out at high temperature in evacuated quartz tubes. The x-ray powder diffraction analysis through Rietveld method was applied to refine the crystal structure. By manipulating the search match program, three nanocrystalline phases of CoTiSb (64.5%), CoSb (15.5%), and TiSb{sub 2} (20.5%) for Mn-doped system and CoTiSb (33%), Ti{sub 3}Sb (35.3%), and CoTi{sub 2} (30.7%) for Fe-doped system were recognized. The term “phase” was used to address the coexistence of different stable chemical compositions for the same half-Heusler alloy. The scanning electron microscope (SEM) and the high-resolution transmission electron microscope (HR-TEM) were applied to characterize the morphology, size, shape, crystallinity and lattice spacing. Good matching was detected between the obtained d values using electron diffraction data and those calculated from x-ray analysis. Well defined nanocrystalline structure with average interatomic distances equaling 0.229 nm, 0.286 nm together with many successive rings with sharp diffraction spots characterized the Fe-doped system. In contrast, partially distorted structured planes and smeared halo surrounded by weak rings were detected in the Mn-doped system. Thermo-magnetic measurements (M-T) were performed for both systems. In addition to Curie transition, many magnetic phase transitions were detected and confirmed through the ΔM/ ΔT vs. T relationship. The field-dependence magnetization (M-H) was measured at different temperatures. The M-H hysteresis loops showed the ferromagnetic character for both systems. Tentative magnetic phase diagrams are suggested as a guide for future research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Guiding the Design of Heterogeneous Electrode Microstructures for Li-Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning

Electrochemical and mechanical properties of lithium-ion battery materials are heavily dependent on their 3D microstructure characteristics. A quantitative understanding of the role played by stochastic microstructures is critical for the prediction of material properties and for guiding synthesis processes. Furthermore, tailoring microstructure morphology is also a viable way of achieving optimal electrochemical and mechanical performances of lithium-ion cells. To facilitate the establishment of microstructure-resolved modeling and design methods, a review covering spatially and temporally resolved imaging of microstructure and electrochemical phenomena, microstructure statistical characterization and stochastic reconstruction, microstructure-resolved modeling for property prediction, and machine learning for microstructure design is presented here. The perspectives on the unresolved challenges and opportunities in applying experimental data, modeling, and machine learning to improve the understanding of materials and identify paths toward enhanced performance of lithium-ion cells are presented.

25 ENERGY STORAGE↗

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X‐rays and Neutrons

Abstract This Review addresses the use of X‐ray and neutron scattering as well as X‐ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub‐Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal‐organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small‐ and wide‐angle X‐ray or neutron scattering), 2) PDF (pair‐distribution function analysis of X‐ray total scattering), and 3) XANES and EXAFS (X‐ray absorption near‐edge structure and extended X‐ray absorption fine structure, respectively). While the scattering techniques provide structural information, X‐ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

Yin, Jia‐Fu↗

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X‐rays and Neutrons

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗