Search NASA⌕ Search

SEARCH · Search NASA

Results for “TELLURIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quantifying spectral albedo effects on bifacial photovoltaic module measurements and system model predictions

We provide a comprehensive analysis of the effect of spectral albedo on photovoltaic (PV) module measurements and system model predictions. We demonstrate how to account for albedo in indoor bifacial device measurements by adjusting the applied irradiance using the scaled rear irradiance method, exemplified on fabricated silicon heterojunction (SHJ) modules. System model performance is studied using a detailed 3D finite-element model, DUET, for fixed-tilt and horizontal single-axis tracked (SAT) arrays between 15 and 75°N. Spectral effects cause variations in measured SHJ module short-circuit current up to 2% and efficiency variation up to 0.3% abs. We further demonstrate that rear-side spectral mismatch factors (SMMs) resulting from including or omitting spectral albedo in PV system modeling vary between ±13%, while total (front+rear) SMMs vary up to 3%, depending on the deployment configuration and latitude. SAT array SMMs are weakly correlated with latitude, while fixed-tilt array SMMs increase with latitude, driven by an increasing proportion of ground-reflected light on the front-side of modules. Ground-reflections can constitute between 2% and 32% of total incident module irradiance, with notably high (>10%) contributions for fixed-tilt arrays at high latitude. Effects of spectral albedo are most significant for: (1) fixed-tilt deployments at high latitudes, (2) wide bandgap technologies such as perovskite and cadmium telluride cells, (3) albedos which vary steeply over the technology's absorption range, and (4) high albedo ground covers. Overall, we demonstrate that omitting spectral albedo effects can result in PV measurement and system-level modeling uncertainties on the order of several percent in these cases.

14 SOLAR ENERGY↗
DOE OSTI2026

Forming Gas Annealing Improves the Performance of Ex Situ Sb-Doped CdSeTe Thin-Film Solar Cells

Group V doping in cadmium-selenide-telluride (CdSeTe) polycrystalline thin-film solar cells has demonstrated improved power conversion efficiencies (PCEs) and long-term stabilities as compared to the traditional Cu doping in the last decade. The dopants can be successfully incorporated by either in situ or ex situ doping. Here, we report that forming gas (FG) annealing enhances the efficiencies of CdSeTe polycrystalline thin-film solar cells utilizing ex situ antimony (Sb) doping via close-space sublimation of SbCl3 at ambient pressure. The FG annealing increases the hole density and carrier lifetime, reduces the back barrier height, and, therefore, leads to improved open-circuit voltages (VOCs) and fill factors (FFs). The champion device achieves a PCE of 19.2% with a VOC of 877 mV, a current density (JSC) of 30.2 mA/cm2, and an FF of 72.4%. Importantly, the Sb-doped devices showed improved stability under stress tests as compared to Cu-doped devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Thermomechanical Cleave of Polycrystalline CdTe Solar Cells and its Applications: A Review

One of the primary research challenges for cadmium telluride (CdTe) solar cells is addressing its open‐circuit voltage ( V OC ) deficit. While theoretical studies and single crystal work show V OC > 1 V is possible, devices remain stubbornly low at ≈800–900 mV. As absorber opto‐electronic properties (e.g., hole density, carrier lifetime) are improved, device modeling suggests that interfaces become limiting. Because CdTe‐based devices are typically grown in the superstrate configuration, the back interface is relatively accessible for manipulation and study, while the front interface (i.e., the heterojunction region) is buried under microns of material and inaccessible. NREL has developed a novel technique to thermomechanically cleave polycrystalline CdTe device stacks directly at the front interface, enabling characterization and controlled manipulation of this important region. Herein, recent work, primarily from NREL, will be reviewed, including considerations for achieving successful delamination; key scientific discoveries about the front interface that have been enabled by this technique; and practical applications, such as flexible, low‐cost solar with high power‐to‐weight ratio.

14 SOLAR ENERGY↗
DOE OSTI2024

Comprehensive Study of Carrier Recombination in High‐Efficiency CdTe Solar Cells Using Transient Photovoltage

Cadmium telluride (CdTe) solar cells represent a commercially successful photovoltaic technology, with an annual production capacity approaching 20 GW. However, improving the open-circuit voltage (V OC ) remains challenging. This study aims to deepen the understanding of charge carrier recombination in CdTe solar cells and to explore alternative dynamical characterization methods that address the limitations found in conventionally used time-resolved photoluminescence for CdTe solar cells. Transient photovoltage and transient photocurrent techniques are utilized to investigate charge carrier dynamics under conditions resembling real-world solar cell operation. The results reveal that an effective nonradiative recombination lifetime of 580 ns dominates the charge dynamics at VOC values below 850 mV. Above this threshold, radiative recombination becomes significant, with a radiative recombination coefficient of 1.1 × 10 −9 cm 3 s −1 . Additionally, the stationary charge carrier density at 1 sun is determined to be around 1 × 10 14 cm −3 . By accurately determining both radiative and nonradiative recombination, this work provides a comprehensive understanding of carrier dynamics in high-performing CdTe devices and paves the way for improving the V OC and performance of CdTe solar cells.

CdTe solar cells↗
DOE OSTI2022

Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories

The cumulative global solar panel waste stream is projected to reach between 60 and 78 million tonnes by 2050. Steps towards developing, demonstrating, and implementing processes that recover glass, metals, and semiconductor materials from end-of-life solar panels have already been taken. However, these processes result in the downcycling of most secondary solar materials. Critically, the costs and benefits of capturing these secondary materials for use in new solar panels are unknown. To evaluate the environmental benefit associated with solar material recycling and reuse in next generation panels, prior inventories must be updated and prepared for integration with recycling processes to examine the benefit of closing the material loop between solar panel end-of-life and new panel manufacturing. This current work describes steps taken to upgrade existing inventories that detail the manufacturing of cadmium-telluride (CdTe) panels from the Ecoinvent -v2.2 life cycle inventory database to Ecoinvent -v3. During this update, material inventories were modified to capture different realistic material supply chains within the constraints of Ecoinvent -v3. Materials discussed in detail in this work include primary flat glass, aluminum, steel, copper, and CdTe. This work demonstrated that environmental indicators such as embodied carbon, acidification, and terrestrial eutrophication associated with solar panel production can be reduced by 25% to over 40% through improved primary material sourcing.

CdTe solar panels↗
DOE OSTI2024

Role of Selenium in CdZnTeSe as a Defect Engineering Agent

Cadmium zinc telluride (CdZnTe) with 10 atomic % Zn has been the material of choice for room-temperature semiconductor compact X- and gamma-ray detector applications for over three decades. Despite its commercial success as the most desirable room-temperature semiconductor radiation detection material, CdZnTe (CZT) suffers from a lack of compositional homogeneity on both the micro- and macroscales and the presence of high concentrations of performance-limiting defects such as subgrain boundary networks (dislocation walls) and secondary phases (Te-rich inclusions). Random distributions of these defects in the CZT matrix result in the spatial inhomogeneity of the material’s charge-transport properties. The recently discovered quaternary Cd x Zn 1-x Te 1-y Se y (CZTS) has experienced remarkable advances in its material properties, with highly reduced defects and higher compositional homogeneity. This book chapter focuses on the presence of performance-limiting defects in CZT that have thus far hindered the yield and cost of high-quality detectors and restricted their widespread deployment for a variety of potential applications, particularly for their use as large-volume gamma detectors, where the demands on material perfection are significantly greater. This chapter also provides an overview of the recent developments in the quaternary material CZTS, particularly the effects of selenium (Se) in the CZTS matrix on the defect engineering of the quaternary alloy material and the advancement of CZTS as a potential next-generation detector operable at room temperature.

Roy, Utpal N.↗
DOE OSTI2024

Structural and Electronic Properties of Indium-Doped n-type Cd-Se-Te Crystals

Here, we present a comprehensive investigation into the potential of n-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current-voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5x1018 cm -3 , mobility of 653 cm 2 /V.s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.

14 SOLAR ENERGY↗
DOE OSTI2026

An International Round-Robin Study on Thermoelectric Module Testing and Development of Standard Power Generation Modules

An international round-robin study on thermoelectric power generation modules was conducted with nine participating laboratories. Two types of commercially available bismuth telluride modules, 30 mm × 30 mm and 40 mm × 40 mm, were used. A test protocol was followed with five temperature set points from 50°C to 150°C. Graphite sheets were used as thermal interface materials with test pressure at 100 psi (0.69 MPa). The results showed large lab-to-lab variations and the key source of uncertainty for module efficiency was identified as the heat flux measurement. In the meantime, significant uncertainty was also found in maximum electrical power (P max ) measurements. As a result of the round-robin, a “standard module” with 4 × 4 legs on a 20 mm × 20 mm platform was suggested. A skutterudite module and a half-Heusler module were produced with identical geometry and 4 mm × 4 mm × 8 mm legs. All transport properties to calculate the figure-of-merit, zT, were measured from ambient temperature to 500°C. Module performance was measured by two laboratories. Two finite-element-analysis (FEA)-based models were developed independently to simulate and predict the module performance. In conclusion, the standard modules eliminated significant test uncertainties and are aimed at assisting device design and achieving more accurate performance predictions.

Round-robin↗
DOE OSTI2021

Rational design of platinum-group-metal-free electrocatalysts for oxygen reduction reaction

Platinum-group-metal (PGM)-free materials have been promised as potential replacement for Pt as the cathodic catalyst in proton exchange membrane fuel cells. Critical design criteria of the PGM-free catalyst reside on the high active site density to compensate its generally lower turn-over frequency and improved mass-charge transfers during the electrocatalysis. Herein, this short review summarizes the research activities in recent years from our team at Argonne National Laboratory in preparing highly active oxygen reduction reaction (ORR) catalysts using rationally designed porous organic precursors, as reported in the First Telluride Science Research Center (TSRC) Workshop on PGM-free Electrocatalysis in 2019. More recent studies by others are also discussed.

25 ENERGY STORAGE↗
DOE OSTI2021

Impact of soiling on Si and CdTe PV modules: Case study in different Brazil climate zones

Soiling, particulate accumulation on photovoltaic (PV) module surfaces, reduces the available solar resource and the resulting generated device power. This case-study summarizes initial results of 5-year research on the contrasting soiling conditions in the tropical, subtropical, and semi-arid climates in Brazil. A major objective is to present a case study of the effects of soiling on PV module performance in different Brazil climate zones that represent the primary areas for the current and expanding Brazil solar installations. For this, the paper presents methodologies to quantify the soiling ratio (SRatio) and soiling rate (SRate) for two representative commercial technologies, polycrystalline or multicrystalline silicon (mc-Si) and thin-film cadmium telluride (CdTe) modules, through soiling monitoring stations deployed in the selected climate regions. An aim is to add to the growing soiling-research knowledge base through addressing these key factors and their relationships to critical electrical, solar resource, thermal, and local meteorological and environmental parameters. This paper presents, evaluates, and compares soiling rates and losses in Belo Horizonte, Minas Gerais (Equatorial Tropical: 19.92° S, 43.99° W), Porto Alegre, Rio Grande do Sul (Humid-Subtropical: 30.05° S, 51.17° W), and Brotas de Macaúbas, Bahia (Semi-Arid: 12.00° S, 42.63° W). The results show that soiling is moderate in all 3-regions, for example with 0.1%/day < SRate < 0.2%/day for Belo Horizonte. Precipitation dominates the cleaning of the modules in the summertime in this climate zone, while it is the major factor year-round in Rio Grande do Sul. Wind is the major issue mitigating the soiling accumulation for the Bahia installation. The methodology incorporates several key refinements, including the normalization and adjustment for the meteorological parameters (temperature, irradiance, wind, precipitation). The evaluations include the region-specific differing effects of non-uniform soiling, natural cleaning, and ambient temperatures.

14 SOLAR ENERGY↗
DOE OSTI2021

The effects of ACRT on melt undercooling during the growth of CZT via the traveling heater method: Ekman versus Taylor-Görtler flows

For the first time, a comprehensive model for the traveling heater method, including detailed species transport and phase-change thermodynamics, is applied to understand the effects of accelerated crucible rotation (ACRT) on the growth of cadmium zinc telluride. Here, a rotation schedule that is designed from classical considerations does not completely mix the melt, rather undercooled regions of localized melt are swept periodically across the growth interface. Even without melt homogenization, these ACRT-driven flows disrupt the persistent undercooling that occurs during THM growth without rotation. An ACRT schedule designed to promote Ekman flows results in lower levels of melt undercooling than a schedule designed to promote Taylor-Görtler flows and greater mixing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stability-based optimization of ACRT for the growth of CZT by the traveling heater method

Numerical modeling is employed to study the effects of several accelerated crucible rotation technique (ACRT) rotation schedules on the growth of cadmium zinc telluride (CZT) by the traveling heater method (THM). In conjunction with these analyses, a measure is developed to estimate the amplitude of disturbances associated with cellular interface growth morphologies that develop over time and across the melt-solid interface. Furthermore, this disturbance amplitude measure is used to assess the ability of ACRT to stabilize the growth interface and thereby minimize inclusion formation processes. Notably, our analyses reveal that interfacial instability is not well correlated with melt undercooling, explaining why classical ACRT approaches to reduce undercooling by mixing may not stabilize growth. Computations show that interface stability is best achieved via rotation schedules that accentuate outward Ekman flows during spin-up and, during spin-down, eliminate Taylor-Görtler flows and minimize inward Ekman flows.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic properties of ferrimagnetic Mn 3 Si 2 Se 6

The physical properties of Mn 3 Si 2 Se 6 have been investigated using single crystals grown by iodine-assisted vapor transport. Additionally, the material possesses a ferrimagnetic ground state and the properties are similar to those in the isostructural compound Mn 3 Si 2 Se 6 . Furthermore, in these trigonal materials, the dominant magnetic exchanges are antiferromagnetic and intrinsically frustrated, leading to a variety of competing ground states. In Mn 3 Si 2 Se 6 , the Curie temperature is TC = 67(1)K, which is slightly lower than that of Mn 3 Si 2 Se 6 where TC = 78K. The anisotropy field is also smaller in the selenide relative to the telluride. In both materials, short-range correlations likely exist well-above TC. Neutron single crystal diffraction data on Mn 3 Si 2 Se 6 suggest a collinear ferrimagnetic structure with the moments tilting out of the ab-plane in zero-field. Finally, the magnetization of vapor grown Mn 3 Si 2 Se 6 is shown for comparison; these vapor grown crystals do not show a sharp onset of magnetic anisotropy above 300K as was previously observed for melt grown Mn 3 Si 2 Se 6 crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Corrosion property of Alloy 625 in Molten FLiNaK salt according to the Tellurium Concentrations

For this work, the corrosion properties of Alloy 625 have been studied in molten FLiNaK salt for 48 h at 700 °C as a function of tellurium (Te) concentrations using immersion tests and electrochemical methods. Under specific Te concentrations, we found that Te-induced corrosion can be suppressed and help protect the alloy against corrosion. The sample after the immersion test containing 0.1 wt.% Te (0.1 wt.% Te sample) had the lowest corrosion depth and mass loss, coupled with the highest charge transfer resistance, obtained using electrochemical impedance spectroscopy (EIS). On the other hand, the alloy with Te content above 0.1 wt.% exhibited severe corrosion penetration and lower charge transfer resistance in FLiNaK. Based on thermodynamical and electrochemical analyses, a corrosion mechanism of Alloy 625 in the molten salt containing Te was theorized involving the formation of stable corrosion products such as Ni/Fe rich layer depleted in Cr, nickel telluride, and chromium oxide.

Hong, Minsung↗
DOE OSTI2020

Anode-free, Lean-Electrolyte Lithium-Sulfur Batteries Enabled by Tellurium-Stabilized Lithium Deposition

For realizing practically viable lithium-sulfur (Li-S) batteries, it is imperative to stabilize Li deposition and improve cyclability while reducing excess Li and electrolyte. We have discovered that introducing tellurium (Te) into the Li-S system as a cathode additive significantly improves the reversibility of Li plating and stripping by forming a tellurized and sulfide-rich solid-electrolyte interphase (SEI) layer on the Li surface. A remarkable improvement in cyclability is demonstrated in anode-free full cells with limited Li inventory and large-area Li-S pouch cells under lean electrolyte conditions. Tellurium reacts with polysulfides to generate soluble polytellurosulfides that migrate to the anode side and form stabilizing lithium thiotellurate and lithium telluride in situ as SEI components. A significant reduction in electrolyte decomposition on the Li surface is also engendered. This work demonstrates Te inclusion as a viable strategy for stabilizing Li deposition and establishes a robust evaluation framework for preserving electrochemical performance under limited Li and limited electrolyte conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Spin-dependent electron transfer in electrochemically transparent van der Waals heterostructures for oxygen evolution reaction

Spin selective catalysis is an emerging approach for improving the thermodynamics and kinetics of reactions. The role of electron spins has been scarcely studied in catalytic reactions. One exception is the oxygen evolution reaction (OER) where strongly correlated metals and oxides are used as catalysts. In OER, spin alignment facilitates the transition of singlet state of the reactant to the triplet state of O 2 . However, the influence of strong correlations on spin exchange mechanism and spin selective thermodynamics of most catalytic reactions remain unclear. Here we decouple the strongly correlated catalyst from the electrolyte to study spin exchange in two-dimensional (2D) magnetic iron germanium telluride (FGT) heterostructure. We demonstrate that transmission of spin and electrochemical information between the catalyst and the reactant can occur through quantum exchange interaction despite the catalyst of FGT being completely encapsulated by graphene or hexagonal boron nitride (hBN). The strong correlations in FGT that lead to enhanced spin exchange in OER are observed in graphene or hBN layers with thicknesses of up to 6 nm. We demonstrate that spin alignment in FGT leads to a lowering of thermodynamic barrier for adsorption of hydroxide ion and electron transfer to the catalyst. This results in up to fivefold enhancement in OER performance and improved kinetics. Our results provide clear evidence that transmission of both quantum mechanical and electrochemical information through quantum spin exchange interaction in FGT leads to an enhancement in catalytic performance.

2D materials↗
DOE OSTI2021

Performance characterization of the Radionuclide Aerosol Sampler/Analyzer air sampler during a high-activity release event

The performance of the Radionuclide Aerosol Sampler/Analyzer (RASA) under high-activity conditions has been evaluated to maintain and protect the operations of International Monitoring System (IMS) radionuclide stations. Station measurements following the Fukushima Daichi accident of 11 March 2011 have been combined with laboratory measurements to understand how the quality of the measurements made using the RASA High-Purity Germanium (HPGe) gamma-spectrometer are impacted by increased sample activity and detector dead-time. Detector saturation has been identified to occur at a count rate of 175,000 counts s-1, at which level there are significant impacts to the sample live-time and detector resolution in addition to a system contamination risk. To safeguard against these effects, a dead-time limit of 16.6% is proposed that could be maintained by monitoring the activity collecting on the filter using a Cadmium Zinc Telluride (CZT) detector installed into the particulate collection area of the RASA. This limit would ensure that the IMS technical specifications for measurement time (> 20 h) and detector resolution (2.5 keV at 1332 keV) are met. The CZT would dynamically control the RASA air flow to limit the collection of particulate activity beneath the HPGe dead-time threshold and would also provide measurements useful for CTBT verification purposes and dose assessments.

Burnett, Jonathan L.↗
DOE OSTI2023

Use of non-contact voltmeter to quantify potential induced degradation in CdTe modules

Potential induced degradation (PID) is a significant reliability issue for photovoltaic modules in the field. Conventionally, to detect the PID-affected modules, all the modules in a string are individually disconnected and measured using I-V (current–voltage) tracers. It is extremely time-consuming, expensive and unsafe (if the module connectors are field aged) approach. In our approach, we aim detecting the PID-affected modules quickly, inexpensively and safely without disconnecting individual modules in the string. In this study, contactless electrostatic voltmeter’s (ESV) strength was explored to detect the PID-affected cadmium telluride (CdTe) modules in a string. These contactless measurements on high-voltage PV strings could make this technique unique and preferable to detect PID-affected modules in a string compared to the I-V curve method. In this work, a CdTe module was stressed for PID using the Aluminum (Al) foil method in a walk-in environmental chamber, which resulted in a reduction of module's peak current (I max ), peak voltage (Vmax), and fill factor (FF), and hence power (Pmax). Outdoor light I-V, EL, and ESV measurements were performed pre- and post-PID to determine the effectiveness of the non-contact ESV technique. Further, the ESV technique successfully detected the change in V max , and hence Pmax, compared to the pre-and post-PID conditions. A difference of less than 2% was observed in the results of the non-contact and non-interruptive method compared to the conventionally used interruptive voltmeter or I-V tracer method. This technique and the test results demonstrate a significant promise to identify poor-performing modules in PV string without disconnection of individual modules in the string.

14 SOLAR ENERGY↗