SEARCH · Search NASA

Results for “TEMPERATURE FIELD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads

A parametric study of the effects of tangential edge constraints on the postbuckling response of flat and shallow curved panels subjected to thermal and mechanical loads is presented. The mechanical loads investigated are uniform compressive edge loads and transverse lateral pressure. The temperature fields considered are associated with spatially nonuniform heating over the panels, and a linear through-the-thickness temperature gradient. The structural model is based on a higher-order transverse-shear-deformation theory of shallow shells that incorporates the effects of geometric nonlinearities, initial geometric imperfections, and tangential edge motion constraints. Results are presented for three-layer sandwich panels made from transversely isotropic materials. Simply supported panels are considered in which the tangential motion of the unloaded edges is either unrestrained, partially restrained, or fully restrained. These results focus on the effects of the tangential edge restraint on the postbuckling response. The results of this study indicate that tangentially restraining the edges of a curved panel can make the panel insensitive to initial geometric imperfections in some cases.

Lin, W.↗

NASA NTRS1998

An Experimental Study of the Effects of A Rotating Magnetic Field on Electrically Conducting Aqueous Solutions

The use of a rotating magnetic field for stirring metallic melts has been a commonly adopted practice for a fairly long period. The elegance of the technique stems from its non-intrusive nature and the intense stirring it can produce in an electrically conducting medium. A further application of the method in recent times has been in the area of crystal growth from melts (e.g. germanium). The latter experiments have been mainly research oriented in order to understand the basic physics of the process and to establish norms for optimizing such a technique for the commercial production of crystals. When adapted for crystal growth applications, the rotating magnetic field is used to induce a slow flow or rotation in the melt which in effect significantly curtails temperature field oscillations in the melt. These oscillations are known to cause dopant striations and thereby inhomogeneities in the grown crystal that essentially degrades the crystal quality. The applied field strength is typically of the order of milli-Teslas with a frequency range between 50-400 Hz. In this investigation, we report findings from experiments that explore the feasibility of applying a rotating magnetic field to aqueous salt solutions, that are characterized by conductivities that are several orders of magnitude smaller than semi-conductor melts. The aim is to study the induced magnetic field and consequently the induced flow in such in application. Detailed flow field description obtained through non-intrusive particle displacement tracking will be reported along with an analytical assessment of the results. It is anticipated that the obtained results will facilitate in establishing a parameter range over which the technique can be applied to obtain a desired flow field distribution. This method can find applicability in the growth of crystals from aqueous solutions and give an experimenter another controllable parameter towards improving the quality of the grown crystal.

Ramachandran Narayanan↗

NASA NTRS2000

Accuracy of Modelled Stratospheric Temperatures in the Winter Arctic Vortex from Infra Red Montgolfier Long Duration Balloon Measurements

The temperature of the stratosphere has been measured in the Arctic vortex every 9-10 minutes along the trajectory of four Infra Red Montgolfier long duration balloons flown for 7 to 22 days during the winters of 1997 and 1999. From a number of comparisons to independent sensors, the accuracy of the measurements is demonstrated to be plus or minus 0.5 K during nighttime and at altitude below 28 km (10 hPa). The performances of the analyses of global meteorological models, European Center for Medium Range Weather Forecasts (ECMWF) 31 and 50 levels, United Kingdom Meteorological Office (UKMO), Data Assimilation Office (DAO), National Climatic Prediction Center (NCEP) and NCEP/NCAR reanalysis, used in photochemical simulations of ozone destruction and interpretation of satellite data, are evaluated by comparison to this large (3500 data points) and homogeneous experimental data set. Most of models, except ECMWF31 in 1999, do show a smal1 average warm bias of between 0 and 1.6 K, with deviations particularly large, up to 20 K at high altitude (5hPa) in stratospheric warming conditions in 1999. Particularly wrong was ECMWF 31 levels near its top level at 10 hPa in 1999 where temperature 25 K colder than the real atmosphere were reported. The average dispersion between models and measurements varies from plus or minus 1.0 to plus or minus 3.0 K depending on the model and the year. It is shown to be the result of three contributions. The largest is a long wave modulation likely caused by the displacement of the temperature field in the analyses compared to real atmosphere. The second is the overestimation of the vertical gradient of temperature particularly in warming conditions, which explains the increase of dispersion from 1997 to 1999. Unexpectedly, the third and smallest (plus or minus 0.6-0.7 K) is the contribution of meso and subgrid scale vertical and horizontal features associated to the vertical propagation of orographic or gravity waves. Compared to other models, the newly available ECMWF 50 levels version assimilating the high vertical resolution radiances of the space borne Advanced Microwave Sounding Unit, performs significantly better (0.03 plus or minus 1.12 K on average between 10 and 140 hPa in 1999) than other models.

Pommereau, J.-P.↗

NASA NTRS1987

Autoignition of Fuel-Oxidizer Mixtures in Microgravity

Microgravity autoignition phenomena that may be influenced by chemically significant walls as well as by photochemically significant radiative fields are examined. First, the limitations of quasi-steady autoignition theory in providing information needed for the characterization of autoignition temperature fields are discussed. Time-dependent autoignition theory is then used to analyze the autoignition behavior of a reactive system where both wall catalysis and gas phase kinetic rates are significant. Space-time trajectories of temperature and species concentrations for such cases are presented

Berlad, A. L.↗

NASA NTRS1977

Deriving mesoscale temperature and moisture fields from satellite radiance measurements over the United States

The ability to provide mesoscale temperature and moisture fields from operational satellite infrared sounding radiances over the United States is explored. High-resolution sounding information for mesoscale analysis and forecasting is shown to be obtainable in mostly clear areas. An iterative retrieval algorithm applied to NOAA-VTPR radiances uses a mean radiosonde sounding as a best initial-guess profile. Temperature soundings are then retrieved at a horizontal resolution of about 70 km, as is an indication of the precipitable water content of the vertical sounding columns. Derived temperature values may be biased in general by the initial-guess sounding or in certain areas by the cloud correction technique, but the resulting relative temperature changes across the field when not contaminated by clouds will be useful for mesoscale forecasting and models. The derived moisture, affected only by high clouds, proves to be reliable to within 0.5 cm of precipitable water and contains valuable horizontal information. Present-day applications from polar-orbiting satellites as well as possibilities from upcoming temperature and moisture sounders on geostationary satellites are noted.

Hillger, D. W.↗

DOE OSTI2022

Using Ensemble Data Assimilation to Estimate Transient Hydrologic Exchange Flow Under Highly Dynamic Flow Conditions

Abstract Quantifying dynamic hydrologic exchange flows (HEFs) within river corridors that experience high‐frequency flow variations caused by dam regulations is important for understanding the biogeochemical processes at the river water and groundwater interfaces. Heat has been widely used as a tracer to infer steady‐state flow velocities through analytical solutions of heat transport defined by the diurnal temperature signals. Under sub‐daily dynamic flow conditions, however, such analytical solutions are not applicable due to the violation of their fundamental assumptions. In this study, we developed a data assimilation‐based approach to estimate the sub‐daily flux under highly dynamic flow conditions using multi‐depth temperature observations at a 5‐min resolution. If the hydraulic gradient is measured, Darcy's law was used to calculate the flux with permeability estimated from temperature responses below the riverbed. Otherwise, flux was estimated directly by assimilating multi‐depth temperature data at 1‐ or 2‐hr time intervals assuming one‐dimensional flow and heat transport governing equation. By comparing estimated fluxes with model‐generated synthetic truth, we demonstrated that both schemes have robust performance in estimating fluxes under highly dynamic flow conditions. This data assimilation‐based flux estimation method was able to capture the vertical sub‐daily fluxes using multi‐depth high‐resolution temperature data alone, even in the presence of multi‐dimensional flow. This approach has been successfully applied to real field temperature data collected at the Hanford site, which experiences highly dynamic HEFs. Our study shows the promise of adopting distributed 1‐D temperature monitoring to capture spatial and temporal exchange dynamics in river corridors at a watershed scale or beyond.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Energy localization efficiency in 1,3,5-trinitro-2,4,6-triaminobenzene pore collapse mechanisms

Atomistic and continuum scale modeling efforts have shown that the shock-induced collapse of porosity can occur via a wide range of mechanisms dependent on pore morphology, the shockwave pressure, and material properties. The mechanisms that occur under weaker shocks tend to be more efficient at localizing thermal energy but do not result in high, absolute temperatures or spatially large localizations compared to mechanisms found under strong shock conditions. However, the energetic material 1,3,5-trinitro-2,4,6-triaminobenzene (TATB) undergoes a wide range of collapse mechanisms that are not typical of similar materials, leaving the collapse mechanisms and the resultant energy localization from the collapse, i.e., hotspots, relatively uncharacterized. Therefore, we present the pore collapse simulations of cylindrical pores in TATB for a wide range of pore sizes and shock strengths that trigger viscoplastic collapses that occur almost entirely perpendicular to the shock direction for weak shocks and hydrodynamic-like collapses for strong shocks that do not break the strong hydrogen bonds of the TATB basal planes. The resulting hotspot temperature fields from these mechanisms follow trends that differ considerably from other energetic materials; hence, we compare them under normalized temperature values to assess the relative efficiency of each mechanism to localize energy. The local intra-molecular strain energy of the hotspots is also assessed to better understand the physical mechanisms behind the phenomena that lead to a latent potential energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1983

Dilution Jet Experiments in Compact Combustor Configurations

The effects of cooling jets on the velocity and temperature fields in a compact reverse flow combustion are discussed. The work is motivated by the need to limit the temperature of past-combustion gases in jet engines to values within the endurance capabilities of turbine blades. The application requires not only that the temperature be kept sufficiently low but also that a suitably tailored temperature profile be provided at the combustor exit, with higher temperatures generally permissible at the blade tip than at the blade root because of higher centrifugal loads at the root. A single jet. As spacing is reduced, jet penetration is also reduced, and the cooling jets tend to remain close to the wall from which they are injected. Results suggest that cooling and temperature distribution tailoring can be accomplished without injecting cooling jets upstream of the turn, and thus it appears that combustors can be made smaller than current designs.

Greber, I.↗

NASA NTRS2001

An Improved Heat Budget Estimation Including Bottom Effects for General Ocean Circulation Models

This paper studies the effects of the underwater light field on heat-budget calculations of general ocean circulation models for shallow waters. The presence of a bottom significantly alters the estimated heat budget in shallow waters, which affects the corresponding thermal stratification and hence modifies the circulation. Based on the data collected during the COBOP field experiment near the Bahamas, we have used a one-dimensional turbulence closure model to show the influence of the bottom reflection and absorption on the sea surface temperature field. The water depth has an almost one-to-one correlation with the temperature rise. Effects of varying the bottom albedo by replacing the sea grass bed with a coral sand bottom, also has an appreciable effect on the heat budget of the shallow regions. We believe that the differences in the heat budget for the shallow areas will have an influence on the local circulation processes and especially on the evaporative and long-wave heat losses for these areas. The ultimate effects on humidity and cloudiness of the region are expected to be significant as well.

Carder, Kendall↗

NASA NTRS1983

Experiments using atmospheric forcing from a FGGE analysis to drive an upper ocean model

Results are presented of a series of numerical experiments in which an upper ocean model is driven by surface heat fluxes and stress fields derived from the FGGE SOP-1 GLAS analysis/forecast system (Halem, et al., 1982). The model results show that most changes in the mixed layer height and horizontal velocity occurs in the first days. On the other hand, changes in the temperature field take a longer time to develop. In the most realistic case (real initial conditions, instantaneous forcing fields from the atmospheric analysis), the resulting changes in temperature were larger than observed and the correlation between observed and predicted changes was poor. The deficiency in the forecast of SST changes may be due to several factors: lack of sufficient ocean resolution, improper initialization, lack of feedback between the ocean and the atmosphere and the absence of transports by the strong boundary currents, and perhaps unrealistic surface fluxes of heat and momentum. Unless these problems are alleviated it is not reasonable to perform coupled atmospheric ocean forecasts.

Camerlengo, A.↗

DOE OSTI2024

Microstructure-Based Modeling of Laser Beam Shaping During Additive Manufacturing

Recent experimental studies suggest the use of spatially extended laser beam profiles as a strategy to control the melt pool during laser powder bed fusion (LPBF) additive manufacturing. However, linkages connecting laser beam profiles to thermal fields and resultant microstructures have not been established. Herein, we employ a coupled thermal transport-Monte Carlo model to predict the evolution of temperature fields and grain microstructures during LPBF using Gaussian, ring, and Bessel beam profiles. In addition, simulation results reveal that the ring-shaped beam yields lower temperatures compared with the Gaussian beam. Owing to the small melt pool size when using the Bessel beam, the grains are smaller in size and more equiaxed compared to those using the Gaussian and ring beams. Our approach provides future avenues to predict the impact of laser beam shaping on microstructure development during LPBF.

36 MATERIALS SCIENCE↗

NASA NTRS1985

Contribution functions for Zeeman-split lines, and line formation in photospheric faculae

The transfer of polarized light in an inhomogeneous stellar atmosphere, and the formation of magnetically sensitive spectral lines, are discussed. A new method for the solution of the transfer equations is proposed. The method gives a natural definition of the contribution functions for Stokes' parameters, i.e., functions describing the contributions from different parts along the line-of-sight (LOS). The formalism includes all magneto-optical effects, and allows for an arbitrary variation of magnetic field, velocity field, temperature, density, etc., along the LOS. The formation of FeI lambda 5250.2 in photospheric faculae is described. A potential-field model of a facular element is presented, and spectra profiles and contribution functions are computed for the Stokes parameters I, Q, and V.

Vanballegooijen, A. A.↗

NASA NTRS1989

Inverse heat transfer analysis of Bridgman crystal growth

The effects of asymmetry in furnace temperature profile and pulling velocity on the crystal interface shape are demonstrated while neglecting the latent heat of solidification. It is seen that the furnace temperature profile may be varied in order to influence the shape of the melt-crystal interface. An exact thermal analysis is then performed on the Bridgman technique by including the latent heat of solidification as a source term. The exact temperature field required for yielding a flat melt-crystal interface is obtained. The earlier observation regarding the influence of furnace temperature profile on the interface shape is confirmed and a criterion for achieving a flat interface is obtained. Various furnace temperature profiles are selected and their corresponding melt-crystal interface results are presented.

Taghavi, K.↗

NASA NTRS1947

Temperatures and Stresses on Hollow Blades For Gas Turbines

The present treatise reports on theoretical investigations and test-stand measurements which were carried out in the BMW Flugmotoren GMbH in developing the hollow blade for exhaust gas turbines. As an introduction the temperature variation and the stress on a turbine blade for a gas temperature of 900 degrees and circumferential velocities of 600 meters per second are discussed. The assumptions onthe heat transfer coefficients at the blade profile are supported by tests on an electrically heated blade model. The temperature distribution in the cross section of a blade Is thoroughly investigated and the temperature field determined for a special case. A method for calculation of the thermal stresses in turbine blades for a given temperature distribution is indicated. The effect of the heat radiation on the blade temperature also is dealt with. Test-stand experiments on turbine blades are evaluated, particularly with respect to temperature distribution in the cross section; maximum and minimum temperature in the cross section are ascertained. Finally, the application of the hollow blade for a stationary gas turbine is investigated. Starting from a setup for 550 C gas temperature the improvement of the thermal efficiency and the fuel consumption are considered as well as the increase of the useful power by use of high temperatures. The power required for blade cooling is taken into account.

Pollmann, Erich↗

DOE OSTI2021

Re-entrance to a ferromagnetic insulator with oxygen-vacancy ordering in the La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattice

The charge-density wave is correlated with the properties in transition metal oxides, and regulating this state is important to explore the potential of oxides. Defects could modulate the local environment, in which the effect is subject to the concentration and arrangement, and an artificial arrangement of defect-ordering is highly expected to design the material properties. In this work, the ordering of oxygen vacancies with a preferred location on the (001) La/SrO plane by self-structural optimization was induced in La 0.7 Sr 0.3 MnO 3 /SrTiO 3 superlattices with medium oxygen pressure during SrTiO 3 deposition, and then the ferromagnetic charge-ordering (CO)/charge-density-wave (CDW) state was formed in La 0.7 Sr 0.3 MnO 3 with susceptibility to magnetic field, temperature, and superlattice configuration. In addition, re-entrance to the ferromagnetic insulator CO/CDW could be induced by a high magnetic field. The selective occupancy of oxygen vacancies on the (001) La/SrO plane and the phase fluctuation around the CO/CDW-to-ferromagnetic metal phase transition were critical to the above properties. The interfacial diffusion with atomic-level resolution to control oxygen vacancies could be used in other magnetoelectric systems and corresponding device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1972

Flow properties of submerged heated effluents in a waterway.

An experimental and theoretical investigation has been undertaken to study the trajectory and growth of thermal effluents having a range of discharge velocities and temperatures. The discharge of an effluent into a waterway was mathematically modeled as a submerged jet injection process by using an integral method which accounts for natural fluid mechanisms such as turbulence, entrainment, buoyancy, and heat transfer. The effects of these mechanisms on the jet properties are examined along with the effects of nonuniformity in the free-stream velocity and temperature fields. The results are supported by experimental data and demonstrate the usefulness of the theory for estimating the location, size, and temperature of the thermal plume.

Campbell, J. F.↗

NASA NTRS1982

Dilution Jet Behavior in the Turn Section of a Reverse Flow Combuster

Measurements of the temperature field produced by a single jet and a row of dilution jets issued into a reverse flow combustor are presented. The temperature measurements are presented in the form of consecutive normalized temperature profiles, and jet trajectories. Single jet trajectories were swept toward the inner wall of the turn, whether injection was from the inner or outer wall. This behavior is explained by the radially inward velocity component necessary to support irrotational flow through the turn. Comparison between experimental results and model calculations showed poor agreement due to the model's not including the radial velocity component. A widely spaced row of jets produced trajectories similar to single jets at similar test conditions, but as spacing ratio was reduced, penetration was reduced to the point where the dilution jet flow attached to the wall.

Riddlebaugh, S. M.↗

NASA NTRS1982

Dilution jet behavior in the turn section of a reverse flow combustor

Riddlebaugh, S. M.↗