Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Comparative evaluation of cast aluminum alloys for automotive cylinder heads: Part II: Mechanical and thermal properties

The first part of this study documented the as-aged microstructure of five cast aluminum alloys namely, 206, 319, 356, A356, and A356+0.5Cu, that are used for manufacturing automotive cylinder heads (Roy et al. in Metall Mater Trans A, 2016). In the present part, we report the mechanical response of these alloys after they have been subjected to various levels of thermal exposure. In addition, the thermophysical properties of these alloys are also reported over a wide temperature range. The hardness variation due to extended thermal exposure is related to the evolution of the nano-scale strengthening precipitates for different alloy systems (Al-Cu, Al-Si-Cu, and Al-Si). The effect of strengthening precipitates (size and number density) on the mechanical response is most obvious in the as-aged condition, which is quantitatively demonstrated by implementing a strength model. Significant coarsening of precipitates from long-term heat treatment removes the strengthening efficiency of the nano-scale precipitates for all these alloys systems. Thermal conductivity of the alloys evolve in an inverse manner with precipitate coarsening compared to the strength, and the implications of the same for the durability of cylinder heads are noted.

36 MATERIALS SCIENCE↗

Processing, structure, and thermal properties of ZrW 2 O 8 , HfW 2 O 8 , HfMgW 3 O 12 , Al(HfMg) 0.5 W 3 O 12 , and Al 0.5 Sc 1.5 W 3 O 12 negative and zero thermal expansion coefficient ceramics

Negative and zero coefficient of thermal expansion (CTE) materials are of interest for developing polymer composites in electronic circuits that match the expansion of Si and in zero CTE supports for optical components, e.g., mirrors. In this work, the processing challenges and stability of ZrW 2 O 8 , HfW 2 O 8 , HfMgW 3 O 12 , Al(HfMg) 0.5 W 3 O 12 , and Al 0.5 Sc 1.5 W 3 O 12 negative and zero thermal expansion coefficient ceramics are discussed. Al 0.5 Sc 1.5 W 3 O 12 is demonstrated to be a relatively simple oxide to fabricate in large quantity and is shown to exhibit single phase up to 1300 °C in air and inert N 2 environments. The negative and zero CTE behavior was confirmed with dilatometry. Thermal conductivity and heat capacity were reported for the first time for HfMgW 3 O 12 and Al 0.5 Sc 1.5 W 3 O 12 and thermal conductivity was found to be very low (~0.5 W/mK). Grüneisen parameter is also estimated. Methods for integration of Al 0.5 Sc 1.5 W 3 O 12 with other materials was examined and embedding 50 vol% of the ceramic powder in flexible epoxy was demonstrated with a commercial vendor.

36 MATERIALS SCIENCE↗

The relative variational model: A topological view of matter and its properties: Thermal expansion

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the experimental data of the thermal expansion for the oxides Al{sub 2}O{sub 3} and UO{sub 2} were analytically depicted by means of this model in the temperature range of 0 K up to the melting point. (authors)

36 MATERIALS SCIENCE↗

Thermal properties and phase transition in the fluoride, (NH{sub 4}){sub 3}SnF{sub 7}

Calorimetric, dilatometric and differential thermal analysis studies were performed on (NH{sub 4}){sub 3}SnF{sub 7} for a wide range of temperatures and pressures. Large entropy (δS{sub 0}=22 J/mol K) and elastic deformation (δ(ΔV/V){sub 0}=0.89%) jumps have proven that the Pa-3↔Pm-3m phase transition is a strong first order structural transformation. A total entropy change of ΔS{sub 0}=32.5 J/mol K is characteristic for the order–disorder phase transition, and is equal to the sum of entropy changes in the related material, (NH{sub 4}){sub 3}TiF{sub 7}, undergoing transformation between the two cubic phases through the intermediate phases. Hydrostatic pressure decreases the stability of the high temperature Pm-3m phase in (NH{sub 4}){sub 3}SnF{sub 7}, contrary to (NH{sub 4}){sub 3}TiF{sub 7}, characterised by a negative baric coefficient. The effect of experimental conditions on the chemical stability of (NH{sub 4}){sub 3}SnF{sub 7} was observed. - Graphical abstract: Strong first order structural transformation Pa-3↔Pm-3m in (NH{sub 4}){sub 3}SnF{sub 7} is associated with very large total entropy change of ΔS{sub 0}=32.5 J/mol K characteristic for the ordering processes and equal to the sum of entropy changes in the related (NH{sub 4}){sub 3}TiF{sub 7} undergoing transformation between the same two cubic phases through the intermediate phases. - Highlights: • (NH{sub 4}){sub 3}SnF{sub 7} undergoes strong first order Pa-3↔Pm-3m phase transition. • Anomalous behaviour of ΔC{sub p} and ΔV/V exists far below phase transition temperature. • Structural distortions are accompanied by huge total entropy change ΔS≈Rln50. • High pressure strongly increases the stability of Pa-3 phase in (NH{sub 4}){sub 3}SnF{sub 7}. • Entropy of the Pa-3↔Pm-3m phase transition does not depend on pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The thermal properties of Martian surface materials at high lattitudes: Possible evidence for permafrost

Evidence is presented from analysis of Viking thermal mapping results that suggests a transition to high thermal inertial material at a depth of approx. 12 cm at +75 deg latitude. This was interpreted as reflecting the transition from ice poor soil to hard frozen permafrost. It was pointed out that such a transition would be expected on the basis of theoretical models of hard frozen permafrost distribution. Although permafrost is not the only plausible martian surface material with high thermal inertia, polar thermal mapping may turn out to be a powerful tool for determining the distribution of permafrost deposits and understanding their behavior. At this point, the circumstantial case for permafrost deposits in the north pole region of Mars is very strong.

Paige, D. A.↗

Chitosan/Polyaniline Conductive Blends for Developing Packaging: Electrical, Morphological, Structural and Thermal Properties

The present study aim to evaluate the development of electrical conducting blends made from the biodegradable polymer, chitosan (Cs), and polyaniline (PANI) doped with dodecylbenzene sulfonic acid dissolved in acid solution chitosan, to enable development of conductive and smart packages that help to monitor exposure conditions of food aimed to reduce food waste. Concentration of Cs is fixed (2%), and PANI (80, 100 mg mL{sup −1}) and glutaraldehyde (Glut) (0.625 × 10{sup −3} μL) concentrations are alter. Morphological (SEM), structural (FTIR, RAMAN), thermal (TGA) and electrical (Hall effect) properties are evaluate. Blends were predominantly negative carriers, with conductivity in order of 10{sup −1} S cm{sup −1}. Best formulations are those make without of Glut. Analyses show an interaction between components. FTIR show bands characteristic of benzene and quinoid rings of PANI, and RAMAN exhibit a band related to PANI’s protonation. TGA show maintenance of maximum degradation temperature of PANI. This results evidence maintenance of PANI’s conducting structures even after blends synthesis.

36 MATERIALS SCIENCE↗

Synthesis, Luminescence and Thermal Properties of PVA–ZnO–Al{sub 2}O{sub 3} Composite Films: Towards Fabrication of Sunlight-Induced Catalyst for Organic Dye Removal

Poly(vinyl alcohol) (PVA)–ZnO–Al{sub 2}O{sub 3} composite films have been prepared by the addition of different compositions of ZnO and Al{sub 2}O{sub 3} through solvent casting method. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–Vis) and photoluminescence spectroscopy (PL) spectra revealed the successful incorporation of ZnO and Al{sub 2}O{sub 3} onto PVA and interactions among ZnO, Al{sub 2}O{sub 3} and PVA molecules. PL data indeed showed the enhanced luminescence property of composite films compared with the PVA. Thermogravimetric analysis (TGA) data showed that thermal stability of PVA–ZnO–Al{sub 2}O{sub 3} composite films could be greatly improved by the incorporation of ZnO and Al{sub 2}O{sub 3} into the system. The glass transition temperature (T{sub g}) were increased for the composite samples using ZnO and Al{sub 2}O{sub 3}. Differential scanning calorimetry (DSC) measurements revealed that the melting temperature (T{sub m}) of PVA–ZnO–Al{sub 2}O{sub 3 }composite films are significantly higher (~ 12 to 25 °C) than PVA. The photocatalytic measurements exhibited better photocatalytic degradation ability of PVA–ZnO–Al{sub 2}O{sub 3} composites over PVA. Such photocatalytic capacity makes the PVA–ZnO–Al{sub 2}O{sub 3} composite films promising candidates for the removal of organic dyes for water purification.

36 MATERIALS SCIENCE↗

Thermal Properties of Wood-Derived Copper-Silicon Carbide Compsites Fabricated Via Electrodeposition

Copper-silicon carbide composites were fabricated by electrodeposition of copper into pores of wood-derived silicon carbide, a ceramic with a microstructure that can be tailored via the use of different wood precursors. Thermal conductivity values were determined using flash diffusivity at temperatures from 0 to 900 C. Thermal conductivities of up to 202 W/m K at 0 C and 148 W/mK at 900 C were achieved. Object-oriented finite-element analysis (OOF) modeling was used to understand the heat flux distributions throughout the microstructures. OOF was also used to calculate the effective thermal conductivity, which correlated well with experimentally-determined values for axially-oriented composites. In addition, OOF was used to predict effective conductivity values and heat flux distributions for transversely-oriented composites.

09 BIOMASS FUELS↗

Thermal properties and effects for Li/BCX (thionyl chloride) cells

New NASA requirements for the screening of lithium cells for space applications involve thermal soaks at elevated temperatures (149 C). The currently qualified Li/BCX cells and three design modifications have been evaluated showing that a design incorporating a shortened electrode stack met this test condition while continuing to satisfy the performance and safety requirements for cells used on NASA manned space vehicles. Information was also developed to show that measured heat capacities for the BCX D size cells correlated well with the heat generated from cells discharged in an insulated environment. Calculated heat capacities based on the amounts and types of materials in a cell were low compared to these values. This information provides the basis for the design of battery packs in the highly insulating environment of outer space.

Takeuchi, E. S.↗

Pure xenon hexafluoride prepared for thermal properties studies

Preparation of a xenon hexafluoride and sodium fluoride salt yields a sample of the highest possible purity for use in thermal measurements. The desired hexafluoride can easily be freed from the common contaminants, xenon tetra-fluoride, xenon difluoride, and xenon oxide tetrafluoride, because none of these compounds reacts with sodium fluoride.

Malm, J. G.↗

Ab initio study of mechanical and thermal properties of GeTe-based and PbSe-based high-entropy chalcogenides

GeTe-based and PbSe-based high-entropy compounds have outstanding thermoelectric (TE) performance and crucial applications in mid and high temperatures. Recently, the optimization of TE performance of high-entropy compounds has been focused on reducing thermal conductivity by strengthening the phonon scattering process to improve TE performance. We report a first-principles investigation on nine GeTe-based high-entropy chalcogenide solid solutions constituted of eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) and 13 PbSe-based high-entropy chalcogenide solid solutions: Pb 0.99-y Sb 0.012 Sn y Se 1-2x Te x S x (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, and y = 0) and Pb 0.99-y Sb 0.012 Sn y Se 1-2x Te x S x (y = 0.05, 0.1, 0.15, 0.2, 0.25 and x = 0.25). We have investigated the mechanical properties focusing on Debye temperature (Θ D ), thermal conductivity (κ), Grüneisen parameter (γ α ), dominant phonon wavelength (λ dom ), and melting temperature (T m ). We find that the lattice thermal conductivity is significantly reduced when GeTe is alloyed into the following compositions: Ge 0.75 Sb 0.13 Pb 0.12 Te, Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te, and Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Mn 0.05 Bi 0.01 Te. This reduction is due to the mass increase and strain fluctuations. The results also show that Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te solid solution has the lowest Young’s modulus (30.362 GPa), bulk and shear moduli (18.626 and 12.359 GPa), average sound velocity (1653.128 m/sec), Debye temperature (151.689 K), lattice thermal conductivity (0.574 W.m –1 .K –1 ), dominant phonon wavelength (0.692 Å), and melting temperature (535.91 K). Moreover, Ge 0.61 Ag 0.11 Sb 0.13 Pb 0.12 Bi 0.01 Te has the highest Grüneisen parameter with a reduced and temperature-independent lattice thermal conductivity. The positive correlation between Θ D and κ is revealed. Alloying of PbSe-based high-entropy by Sb, Sn, Te, and S atoms at the Se and Pb sites resulted in much higher shear strains resulted in the reduction of phonon velocity, a reduced Θ D , and a lower lattice thermal conductivity.

74 ATOMIC AND MOLECULAR PHYSICS↗

Mineralogy and Thermal Properties of V-Type Asteroid 956 Elisa: Evidence for Diogenitic Material from the Spitzer IRS (5-35 Micrometers) Spectrum

We present the thermal infrared (5-35 micrometer) spectrum of 956 Elisa as measured by the Spitzer Infrared Spectrograph ("IRS"; Houck,1.R. et .11. [20041. Astrophys, 1. SuppL 154, 18-24) together with new ground-based lightcurve data and near-IR spectra. From the visible lightcurve photometry, we determine a rotation period of 16.494 +/- 0.001 h, identify the rotational phase of the Spitzer observations, and estimate the visible absolute magnitude (Hv) at that rotational phase to be 12.58 +/- 0.04. From radiometric analysis of the thermal flux spectrum, we find that at the time of observation 956 Elisa had a projected radius of 5.3 +/- 0.4 km with a visible albedo pv = 0.142+/- 0.022, significantly lower than that of the prototype V-type asteroid, 4 Vesta. (This corresponds to a radius of 5.2 +/- 0.4 km at lightcurve mean.) Analysis with the standard thermal model (STM) results in a sub-solar temperature of 292.3 +/- 2.8 K and beaming parameter eta = 1.16 +/- 0.05. Thermophysical modeling places a lower limit of 20 J m(exp -2)K(exp -1)s(exp -1/2) on the thermal inertia of the asteroid's surface layer (if the surface is very smooth) but more likely values fall between 30 and 150 J m(exp -2)K(exp -1)s(exp -1/2) depending on the sense of rotation. The emissivity spectrum, calculated by dividing the measured thermal flux spectrum by the modeled thermal continuum, exhibits mineralogically interpretable spectral features within the 9-12 micrometer reststrahlen band, the 15-16.5 micrometer Si-O-Si stretching region, and the 16-25 micrometer reststrahlen region that are consistent with pyroxene of diogenitic composition: extant diogenitic pyroxenes fall within the narrow compositional range W0(sub 2+/-1)En(sub 74+/-2)Fs(sub 24+/-1). Spectral deconvolution of the 9-12 micrometer reststrahlen features indicates that up to approximately 20% olivine may also be present, suggesting an olivine-diogenite-like mineralogy. The mid-IR spectrum is inconsistent with non-cumulate eucrite as the major component on the surface of 956 Elisa, although cumulate eucrite material may be present at abundances lower than that of the diogenite component. Analysis of new near-IR spectra of 956 Elisa with the Modified Gaussian Model (MGM; Sunshine, J,M., Pieters, C.M., Pratt, S.F.[1990]. J. Geophys. Res, 95 (May), 6955-6966) results in two pyroxene compositions: 75% magnesian low-Ca pyroxene and 25% high-Ca pyroxene. High-Ca pyroxene is not evident in the mid-IR data, but may belong to a component that is underrepresented in the mid-IR spectrum either because of its spatial distribution on the asteroid or because of its particle size. High-Ca pyroxenes that occur as exsolution lamellae may also be more evident spectrally in the NIR than in the mid-IR. In any case, we find that the mid-IR spectrum of 956 Elisa is dominated by emission from material of diogenite- like composition, which has very rarely been observed among asteroids.

Lim, Lucy F.↗

Bridging the Gap: Thermal Properties in Composites from Microscale Constituents to Macroscale Performance

In this work, a finite element analysis model was developed to predict the frequency domain thermal response to heat input from a gaussian heat source for arbitrary 2-dimensional geometries. The model was used for geometric parameter fitting of samples experimentally measured using Frequency Domain Thermoreflectance (FDTR). Inverse fitting was performed to on experimental data to extract characteristic geometries of samples with feature sizes smaller than the Il e 2 radius of the laser used to probe the system. Further simulations were done to demonstrate the ability of the system to detect a variety of feature types. Silicon wafers with 50 nm to 1 pm of wet thermal oxide were measured and fit. Finally, microparticles suspended in epoxy were imaged using FDTR.

42 ENGINEERING↗

Thermal properties of granulated materials.

Review of the thermophysical properties of granular materials or silicates believed to simulate the lunar surface layer. Emphasis is placed on thermal conductivity data and the effects of material and environmental variables on the thermal conductivity. There are three basic mechanisms of heat transfer in particulate materials: conduction by the gas contained in the void spaces between the particles; conduction within the solid particles and across the interparticle contacts; and thermal radiation within the particles, across the void spaces between particle surfaces, and between void spaces themselves. Gas and solid conduction, thermal radiation, and the interaction between conduction and radiation are considered.

Wechsler, A. E.↗

Thermal properties of 433 Eros

Radiometric and reflected light observations of 433 Eros at high time resolution, high accuracy, and broad spectral coverage are reported. A thermal inertia model is used to estimate the thermal inertia, albedo, and size of Eros. An albedo of 0.125 plus or minus 0.025 with axes of 39.3 plus or minus 2.0 x 16.1 plus or minus 0.8 km is found. The estimate of the albedo is about 30% lower than previous estimates.

Lebofsky, L. A.↗

Exploration and comparison of hydrodynamic and thermal properties of horizontal and vertical electropolishing configurations with various boundary conditions

Extending initial efforts reported at the 2007 SRF Workshop, a system for modeling the thermal and hydrodynamic flow conditions internal to an electropolishing niobium cavity has been developed using the commercial code CFDesign®. Building upon parametric studies with small niobium samples that highlighted the process sensitivity to both local temperature and fluid flow conditions, we seek to gain predictive insight into processing methods which assure uniform controlled polishing ? in both the traditional rotating horizontal configuration as well as the potentially more convenient vertical orientation. For present modeling runs, the experimentally measured temperature-dependent viscosity of the standard HF/H2SO4 electrolyte has been included. For the horizontal configuration, we have modeled the recent JLab-adopted reduced temperature and flow conditions used for ILC cavity processing and find corroboration of improved thermal control and uniformity. For vertical EP, the amplitude and pattern of nominally steady-state internal convective flow under conditions of external wall cooling and no electrolyte circulation has been observed for vertical EP for both single-cell and 9-cell cavities. Opportunities for modeling an integrated next-generation system are being explored.

Reece, Charles↗