Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIME RESOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

The occultation of beta Scorpii by Jupiter. I - The structure of the Jovian upper atmosphere

The light curves of beta Scorpii AB and C were recorded during occultation by Jupiter with a time resolution of 0.01 sec. The spikes on the curves, correlated with flashes observed through the eyepiece, are shown to be due to density fluctuations in Jupiter's atmosphere. Using the delays in spike arrival times, the ratio of the refractivities at 3934 and 6201 A is found to be 0.9713 + or - 0.0015. Temperature profiles for three different assumed atmospheric compositions are generated from the light curves. Assuming the terrestrial value for the eddy diffusion coefficient, the turbopause is calculated to occur at the 10 to the 13th power per cu cm level, below which a positive temperature gradient of about 1 K/km is indicated.

Veverka, J.↗

Particle sightings by the infrared telescope on Spacelab 2

Part of the objective of the cooled infrared telescope on Spacelab 2 was to determine the particle environment around the Space Shuttle. The telescope scanned the sky in six wavelength bands ranging from 2 to 100 microns with high time resolution. Dust particles could be identified from their particular signature in the data stream. Particle data from about 4 h early in the mission were analyzed in terms of size, color temperature, velocity, and time. The 1100 particles that were seen were slow moving and ranged in color temperature from 190 to 350 K with a few much hotter. The minimum detectable diameter is between 5 and 13 microns, depending on temperature. The size distribution resembles sample distributions collected at a Shuttle preparation facility. Although particle detection rates varied widely with time, no specific events were identified to be associated with particle production. It was not possible to determine the particle composition, although it was probably not ice.

Simpson, J. P.↗

Analysis of Multiple Precipitation Products and Preliminary Assessment of Their Impact on Global Land Data Assimilation System (GLDAS) Land Surface States

Land surface models (LSMs) are computer programs, similar to weather and climate prediction models, which simulate the stocks and fluxes of water (including soil moisture, snow, evaporation, and runoff) and energy (including the temperature of and sensible heat released from the soil) after they arrive on the land surface as precipitation and sunlight. It is not currently possible to measure all of the variables of interest everywhere on Earth with sufficient accuracy and space-time resolution. Hence LSMs have been developed to integrate the available observations with our understanding of the physical processes involved, using powerful computers, in order to map these stocks and fluxes as they change in time. The maps are used to improve weather forecasts, support water resources and agricultural applications, and study the Earth's water cycle and climate variability. NASA's Global Land Data Assimilation System (GLDAS) project facilitates testing of several different LSMs with a variety of input datasets (e.g., precipitation, plant type). Precipitation is arguably the most important input to LSMs. Many precipitation datasets have been produced using satellite and rain gauge observations and weather forecast models. In this study, seven different global precipitation datasets were evaluated over the United States, where dense rain gauge networks contribute to reliable precipitation maps. We then used the seven datasets as inputs to GLDAS simulations, so that we could diagnose their impacts on output stocks and fluxes of water. In terms of totals, the Climate Prediction Center (CPC) Merged Analysis of Precipitation (CMAP) had the closest agreement with the US rain gauge dataset for all seasons except winter. The CMAP precipitation was also the most closely correlated in time with the rain gauge data during spring, fall, and winter, while the satellitebased estimates performed best in summer. The GLDAS simulations revealed that modeled soil moisture is highly sensitive to precipitation, with differences in spring and summer as large as 45% depending on the choice of precipitation input.

Gottschalck, Jon↗

Evaluation of Ten Methods for Initializing a Land Surface Model

Land surface models (LSMs) are computer programs, similar to weather and climate prediction models, which simulate the stocks and fluxes of water (including soil moisture, snow, evaporation, and runoff) and energy (including the temperature of and sensible heat released from the soil) after they arrive on the land surface as precipitation and sunlight. It is not currently possible to measure all of the variables of interest everywhere on Earth with sufficient accuracy and space-time resolution. Hence LSMs have been developed to integrate the available observations with our understanding of the physical processes involved, using powerful computers, in order to map these stocks and fluxes as they change in time. The maps are used to improve weather forecasts, support water resources and agricultural applications, and study the Earth"s water cycle and climate variability. NASA"s Global Land Data Assimilation System (GLDAS) project facilitates testing of several different LSMs with a variety of input datasets (e.g., precipitation, plant type).

Rodell, M.↗

A Method for Obtaining High Time and Spatial Resolution Convective Cloud Top Data for the TTL

A method for obtaining high time and spatial resolution convective cloud top data for the TTL Leonhard Pfister, Eric Jensen, Rei Ueyama, Eliot Atlas, and Maria Navarro Convective systems in the tropics have a maximum in the cloud top altitude distribution of about 13.5 km. However, there is a significant tail to this distribution -- a few percent reach the cold point tropopause (CPT) at 16.5 km, and there has been clear evidence of convective mass deposited as high as 19 km in the tropics. The region between 13.5 km and the cold point tropopause is transitional, between the free tropical troposphere where convective mixing dominates, and the stratosphere where slow upward ascent dominates. In this region (the Tropical Tropopause Layer), convective injection, slow ascent, and mixing from midlatitudes all have similar time scales. So, even though only a few percent of convective systems reach the CPT, convection is important. Space Based Lidar and cloud radar measurements have yielded information about long term average statistical distributions of cloud altitude as a function of location. However, we also need time-dependent cloud top altitude and cloud top potential temperature information, primarily to understand the water vapor and TTL cloud distributions. This is because the effect of convection depends on the local temperature, and on the subsequent temperature history. Time dependent cloud top information is also needed to understand short-lived tracers because cross-isentropic flow is time and space dependent. This paper presents a method of obtaining time and space dependent convective cloud top theta (and altitude) information using 3-hourly geostationary brightness temperature data, coupled with global 3 -hourly rainfall estimates and temperature analyses. We explore different mixing algorithms to obtain the most reasonable agreement with near-simultaneous observations by cloudsat and calipso. Observations of short-lived tracers from ATTREX, coupled with short-term trajectories are used to test the method's accuracy. An important caveat is the ambiguity of evaluating convective cloud top altitudes under from combined cloudsat and calipso measurements.

cold point tropopause (CPT)↗

A new class of solar burst with MM-wave emission but only at the highest frequency (90 GHz)

High sensitivity and high time resolution solar observations at 90 GHz (lambda = 3.3 mm) have identified a unique impulsive burst on May 21, 1984 with emission that was more intense at this frequency than at lower frequencies. The first major time structure of the burst was over 10 times more intense at 90 GHz than at 30 GHz, 7 GHz, or 2.8 GHz.Only 6 seconds later, the 30 GHz impulsive structures started to be observed but still with lower intensity than at 90 GHz. Hard X-ray time structures at energies above 25 keV were almost identical to the 90 GHZ structures (to better than one second). All 90 GHz major time structures consisted of trains of multiple subsecond pulses with rise times as short as 0.03 sec and amplitudes large compared to the mean flux. When detectable, the 30 GHz subsecond pulses had smaller relative amplitude and were in phase with the corresponding 90 GHz pulses.

Kaufmann, P.↗

Decimetric type III radio bursts and associated hard X-ray spikes

For a relatively weak solar flare on August 6, 1981, at 10:32 UT, a detailed comparison is made between hard X-ray spikes and decimetric type III radio bursts. The hard X-ray observations are made at energies above 30 keV, and the radio data are obtained in the frequency range from 100 to 1000 MHz. The time resolution for all the data sets is approximately 0.1 s or better. The dynamic radio spectrum exhibits many fast drift type III radio bursts with both normal and reverse slope, whereas the X-ray time profile contains many well resolved short spikes with durations less than or equal to 1 s. Some of the X-ray spikes are seen to be associated in time with reverse-slope bursts, indicating either that the electron beams producing the radio burst contain two or three orders of magnitude more fast electrons than has previously been assumed or that the electron beams can induce the acceleration of additional electrons or occur in coincidence with this acceleration. A case is presented in which a normal slope radio burst at approximately 600 MHz occurs in coincidence with the peak of an X-ray spike to within 0.1 s.

Dennis, B. R.↗

Spectral evolution of a subclass of gamma-ray bursts observed by batse

Among the gamma-ray bursts (GRBs) observed by the Burst and Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory we define a subclass of bursts based on similar morphology: a sharp rise followed by a longer decay time. About 7% of all the gamma-ray bursts observed by BATSE fall into this subclass. We study the spectral evolution of these bursts by fitting models to time-segmented burst spectra and find no clear distinction between the spectral evolutionary properties of this subclass and those of other bursts. Further, we study the high time resolution spectral evolution of this subclass of GRBs using their spectral hardness ratios. A majority of the bursts show hardness ratio leading the counting rate and also display a continuous hard to soft evolution. The time lag between the counting rate and the hardness ratio is found to be directly correlated with the rise time of the counting rate profile. We also find, for the first time, evidence for spectral variation in a timescale of 64 ms.

Bhat, P. N.↗

Miniature Optical Communications Transceiver (MOCT)

This project will advance the technology readiness of the Miniature Optical Communications Transceiver (MOCT) from TRL 3 to TRL 4. MOCT consists of a novel software-defined pulse modulator (SDPM),integrated laser system, and avalanche photodetection system, and is designed for optical communications between small spacecraft, including CubeSats, using a pulse position modulation (PPM) scheme. PPM encodes data in the timing of optical pulses with respect to a set of timing windows known as slots. The MOCT design focuses on power-efficiency making it particularly interesting for small satellites. We have demonstrated in the laboratory that this technology can generate shorter than 1 nanosecond-wide 1550 nanometer (nm) optical pulses with better than 50 picosecond (ps) timing accuracy. The timing resolution of this system is roughly a factor of four better than previously flown systems, meaning that it can transmit more bits of data with each optical pulse. Because this technology can both generate and time stamp the arrival of short optical pulses with 50 ps precision, it simultaneously provides power efficient communications and relative ranging between small spacecraft at the centimeter (cm) level.

Small Spacecraft↗

Short solar events with evidence of repetitive structures

Several short (less than 40 s) solar hard X-ray events (greater than 100 keV) have been observed simultaneously with identical instruments on the Venera 11, 12, 13, and 14 and Prognoz 7 (Franco-Soviet Signe experiments) spacecraft. High time resolution (equal to or greater than 2 ms) data were stored in memory when a trigger occurred. The observations reported here were made by Prognoz 7 and V12 which were closer to the sun at the time and provided good statistics. Observations of modulation with a period of 1.6 s for the event on 1978 December 3 are presented. Also presented is evidence for fast time fluctuations from an event on 1979 November 6, observed with Venera 12, and another on 1981 September 6, observed with the Solar Maximum Hard X-Ray Burst Spectrometer. Power spectrum analysis, epoch folding, and Monte Carlo simulation to evaluate the statistical significance of persistent time delays between features. The results are discussed in light of the MHD model proposed by Zaitsev and Stepanov (1982) and Zaitsev, Stepanov, and Chernov (1984).

Desai, Upendra D.↗

High Speed CCD Photometry of the P/Shoemaker-Levy 9-Jupiter Collision

Using the National Solar Observatory 64-inch Vacuum Tower Telescope at Sacramento Peak, we have obtained high spatial and time resolution images of Jupiter in the visible continuum at 5000 A, in the 7250 A and 8900 A methane bands, plus their adjacent continuum bands (at 7500 A and 9500 A), before, during, and after the times of the collisions. In addition, with the use of a beam splitter, near-IR images (J-band) were also obtained simultaneously with a 256 x 256 NICMOS chip. The observations spanned the time period 14 - 25 July 1994, at intervals of several hours each day, depending on the weather and the visibility of Jupiter. The original proposal was to use the data to track the evolution of the impact clouds produced by impacts from comet Shoemaker-Levy 9. We are still refining the automated data analysis software and finalizing the calibration of the images. The latter is an arduous problem since many of the images were made in daylight. We expect to finish these two tasks in early 1998, whereupon the analysis will proceed very quickly. Our goals remain unchanged. We will use lightcurves of the impact sites for the following goals: (1) to monitor and understand the time variability of the optical depths of the impact clouds; (2) to monitor and understand the time variability of the masses of the impact clouds; (3) to monitor the wind speeds in the upper atmosphere of Jupiter.

Source record↗

Length of day and atmospheric angular momentum - A comparison of 1981-1983

In connection with the availability of observations of increasingly greater accuracy and higher time resolution, studies have been conducted regarding the relationship between the earth's rotation and the angular momentum of its atmosphere. The present paper reports an investigation conducted on the basis of earth rotation values determined during the time from 1981 to 1983 with the aid of very long baseline interferometry (VLBI), lunar laser ranging (LLR), and satellite laser ranging (SLR). The values obtained with the different techniques were compared, and a combined series of length of day (LOD) values were computed. A similar computation procedure was applied to the atmospheric angular momentum (AAM) values of U.S. and European origin to obtain corresponding series of LOD values.

Morgan, P. J.↗

Persistent time intervals between features in solar flare hard X-ray emission

Several solar hard X-ray events (greater than 100 keV) were observed simultaneously with identical instruments on the Venera 11, 12, 13, 14, and Prognoz spacecraft. High time resolution (= 2 ms) data were stored in memory when a trigger occurred. The observations of modulation are presented with a period of 1.6 s for the event on December 3, 1978. Evidence is also presented for fast time fluctuations from an event on November 6, 1979, observed from Venera 12 and another on September 6, 1981, observed from the Solar Maximum Mission. Power spectrum analysis, epoch folding, and Monte Carlo simulation were used to evaluate the statistical significance of persistent time delays between features. The results are discussed in light of the MHD model proposed by Zaitsev and Stepanov.

Desai, Upendra D.↗

Plasma Sheet Source and Loss Processes

Data from the TIMAS ion mass spectrometer on the Polar satellite, covering 15 ev/e to 33 keV/e in energy and essentially 4(pi) in view angles, are used to investigate the properties of earthward (sunward) field-aligned flows of ions, especially protons, in the plasma sheet-lobe transition region near local midnight. A total of 142 crossings of this region are analyzed at 12-sec time resolution, all in the northern hemisphere, at R(SM) approx. 4 - 7 R(sub E), and most (106) in the poleward (sunward) direction. Earthward proton flows are prominent in this transition region (greater than 50% of the time), typically appearing as sudden "blasts" with the most energetic protons (approx. 33 keV) arriving first with weak flux, followed by protons of decreasing energy and increasing flux until either: (1) a new "blast" appears, (2) the flux ends at a sharp boundary, or (3) the flux fades away within a few minutes as the mean energy drops to a few keV. Frequent step-like changes (less than 12 sec) of the flux suggest that perpendicular gradients on the scale of proton gyroradii are common. Peak flux is similar to central plasma sheet proton flux (10(exp 5) - 10(exp 6)/[cq cm sr sec keV/e] and usually occurs at E approx. 4 - 12 keV. Only the initial phase of each "blast" (approx. 1 min) displays pronounced field-alignment of the proton velocity distribution, consistent with the time-of-flight separation of a more or less isotropic source distribution with df/d(nu) less than 0. The dispersive signatures are often consistent with a source at R(SM) less than or equal to 30 R(sub E). No systematic latitudinal velocity dispersion is found, implying that the equatorial plasma source is itself convecting. In short, the proton "blasts" appear as sudden local expansions of central plasma sheet particles along reconfigured ("dipolarized") magnetic field lines.

Lennartsson, O. W.↗

Motions of particle microstructures in the magnetopause boundary layer

Particle flux data acquired by the ISEE 1 and 2 spacecraft reveal many of magnitude changes within the magnetopause boundary layer that occur during less than 1/4 s of time. These changes define small-scale particle structure, or microstructures within the region, many of which are apparently inclusions of plasma from adjacent regions. Particle structures resolved by the high time resolution data include groups with periods as short as 0.375 s. An estimate is derived for the motion of the microstructures with respect to an oscillatory inner boundary for four afternoon sector boundary layer crossings by measuring interspacecraft time differences as the features propagate past the satellites. On average the microstructures move toward the tail of the magnetosphere in concert with the wavy large-scale inner boundary. Furthermore, the orientations of the edges of the structures maintain an aspect similar to that of the boundary. These characteristics are expected for magnetohydrodynamic plasma flows that generate vorticity due to velocity shear stresses.

Larson, Nels R.↗

Discrete changes in solar coronal hole boundaries

Sequences of Skylab X-ray images near central meridian passages of a large solar coronal hole are used here to examine hole boundary changes with a time resolution of 90 min. It is found that X-ray bright points play a key role in both the expansion and contraction of the coronal hole. The size scale of the boundary changes is about 20,000 km, and the time scale is 3 hr or less. A scenario is suggested in which a large-scale closed magnetic field interacts with a bright point to effect a change in the hole boundary.

Kahler, S. W.↗

Unprecented syntonization and syncronization accuracy via simultaneous viewing with GPS receivers: Construction characteristics of an NBS/GPS receiver

The National Bureau of Standards/Global Positioning System (NBS/GPS) receiver is discussed. It is designed around the concept of obtaining high accuracy, low cost time and frequency comparisons between remote frequency standards and clocks with the intent to aid international time and frequency coordination. Preliminary tests of this comparison technique between Boulder, CO and Washington, D.C indicate the ability to do accurate time transfer to better that 10 ns, and frequency measurements to better than 1 part in 10 to the 14th power. The hardware and software of the receiver is detailed. The receiver is fully automatic with a built-in 0.1 ns resolution time interval counter. A microprocessor does data processing. Satellite signal stabilities are routinely at the 5 ns level for 15 s averages, and the internal receiver stabilities are at the 1 ns level.

Davis, D. D.↗

High-resolution sounding rocket observations of large-amplitude Alfven waves

Shear Alfven waves with amplitudes greater than 100 mV/m were observed on two recent sounding rocket flights. The largest waveforms are best described as a series of step functions, rather than as broadband noise or as single frequency waves. Complete two-dimensional E and B measurements at 4-ms time resolution were made, showing a downward propagation direction and implying insignificant reflection from the ionosphere at frequencies greater than 1 Hz. Intense, field-aligned, low-energy electron fluxes accompany the waves. Acceleration of these electrons by the Alfven waves is shown to be feasible. The waves in at least one case have a sufficently large ponderomotive potential to generate the observed density fluctuations of order one.

Boehm, M. H.↗