SEARCH · Search NASA

Results for “Tensor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Short-range correlations in nuclei

Atomic nuclei are held together by the strong nuclear force acting between protons and neutrons (nucleons). While the long range, averaged part of this force is well described by the nuclear shell model, the short-range and tensor components create a fascinating substructure: pairs of nucleons that momentarily approach each other very closely, acquiring large relative momenta. These short-range correlated (SRC) pairs account for roughly 20% of all nucleons in any nucleus and almost all of the high momentum nucleons. This chapter provides an introduction to SRC pairs: their origin in the nucleon-nucleon tensor force, the experimental methods used to study them, principally deep inelastic and quasielastic electron and proton scattering, and the comprehensive picture that has emerged over the past three decades.

FOS: Physical sciences↗

DOE OSTI2026

Anti-Ultralocality and Plateau Models of Inflation

Anti-ultralocality refers to the growth of spatial gradient terms relative to velocity terms in the coupled Einstein--scalar field equations. It is a characteristic feature of decelerated expansion before the onset of inflation. Previous numerical relativity studies have shown that anti-ultralocality prevents the onset of inflation in models with power-law inflaton potentials. In this paper, we show that models with plateau-shaped inflaton potentials, which are considered to be the simplest way to generate a tensor-to-scalar ratio below current observational upper limits, are especially vulnerable to anti-ultralocality effects. The reasons are the flatness of the plateau and the energy density gap of $\sim 10$ orders of magnitude between the Planck density and the plateau potential energy. To study the problem, we develop a protocol for assessing the viability of inflationary models in general, and we apply it to a plateau potential using a previously validated numerical relativity code. We find that, starting from generic initial conditions, the growth of gradient terms in the Einstein equations relative to non-gradient terms either prevents inflation from lasting for enough $e$-folds or triggers a phase of quantum runaway. We show that the fine-tuning of initial conditions necessary to avoid these issues becomes more severe as the energy scale of inflation is made smaller, disfavoring common approaches for reducing the tensor-to-scalar ratio.

FOS: Physical sciences↗

DOE OSTI2024

Probing the Isospin Composition of Short-Range Correlated Pairs at Jefferson Lab Hall B

Nucleons in short-range correlated (SRC) pairs, due to their close proximity and high relative momentum, can provide insight into the short-range part of the strong nuclear interaction. In particular, the prevalence of np pairs is due to the dominance of a tensor term for correlated nucleons with momenta of approximately 400?600 MeV/c. This dissertation comprises two studies advancing the community?s understanding of the isospin composition of SRC pairs. First, I performed a study of proton and neutron knockout from initially low-momentum and high-momentum states in 3He. Previous work has shown that protons are disproportionately represented in high-momentum states in neutron-rich nuclei. I demonstrate that spectral functions for the proton-rich nucleus 3He predict, in agreement with data, that neutrons are disproportionately represented in high-momentum states, but that 3He does not display the same strong prevalence of np pairs that is observed in larger nuclei. Second, Generalized Contact Formalism (GCF), a well-supported theory for predicting SRC behavior, predicts the transition from an isospin-dependent, tensor-dominant interaction at intermediate distances to a scalar-dominant, isospin-independent interaction at very short distances. This dissertation uses data from the CLAS12 Nuclear Targets Experiments in Hall B at Jefferson Lab to measure the relative abundances of pp and pn pairs for increasing relative momentum and decreasing separation. I provide an independent confirmation of the previously-observed increase in pp pairs at increasing momentum of the struck nucleon. I also contribute to the application of the new CLAS12 Central Neutron Detector by precisely measuring the neutron detection efficiency and developing a machine learning model for rejecting charged particle background.

Seroka, Erin↗

DOE OSTI2025

Direct interpolative construction of the discrete Fourier transform as a matrix product operator

The quantum Fourier transform (QFT), which can be viewed as a reindexing of the discrete Fourier transform (DFT), has been shown to be compressible as a low-rank matrix product operator (MPO) or quantized tensor train (QTT) operator. However, the original proof of this fact does not furnish a construction of the MPO with a guaranteed error bound. Meanwhile, the existing practical construction of this MPO, based on the compression of a quantum circuit, is not as efficient as possible. We present a simple closed-form construction of the QFT MPO using the interpolative decomposition, with guaranteed near-optimal compression error for a given rank. This construction can speed up the application of the QFT and the DFT, respectively, in quantum circuit simulations and QTT applications. We also connect our interpolative construction to the approximate quantum Fourier transform (AQFT) by demonstrating that the AQFT can be viewed as an MPO constructed using a different interpolation scheme.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Utah FORGE 3-2514: Strain Sensing Array for Deformation Characterization - 2024 Annual Workshop Presentation

This is a presentation on the Strain Sensing Array to characterize deformation at the FORGE site project by Clemson University, presented by Lawrence Murdoch. The project's objective was to evaluate the feasibility of measuring and interpreting tensor strain data to improve the performance of EGS. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 23, 2024.

15 GEOTHERMAL ENERGY↗

DOE OSTI2024

A Low-Rank QTT-based Finite Element Method for Elasticity Problems

We present an efficient and robust numerical algorithm for solving the linear elasticity problem that combines the Quantized Tensor Train format and a domain partitioning strategy. This approach makes it possible to solve the linear elasticity problem on a computational domain that is more general than a square. By integrating Z-ordering and subdomain concatenation, our method substantially decreases memory usage and achieves a notable reduction in rank compared to established Finite Element implementations like the FEniCS platform. This efficiency is maintained while still guaranteeing exponential convergence with respect to the number of degrees of freedom. This performance gain, however, requires a fundamental rethinking of how core finite element operations are implemented. This includes changes to mesh discretization, node and degree of freedom ordering, stiffness matrix and internal nodal force assembly, and the execution of algebraic matrix-vector operations. In this work, we discuss all these aspects in detail and assess the method’s performance in the numerical approximation of three representative test cases.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Comparison of DeePMD, MTP, GAP, ACE and MACE Machine‐Learned Potentials for Radiation‐Damage Simulations: A User Perspective

Accurate and efficient interatomic potentials are essential for molecular dynamics (MD) simulations of radiation damage, gas diffusion, and phase stability in complex ceramics such as LiAlO 2 , especially under extreme conditions relevant to tritium production. Here, we evaluate the performance of six machine-learned interatomic potentials (MLIPs), moment tensor potential (MTP), Gaussian approximation potential, deep potential (DeePMD), atomic cluster expansion (ACE), message-passing ACE (multilayer atomic cluster expansion (MACE) pretrained) and MACE (trained from-scratch), all trained on the same density functional theory dataset with inclusion of tritium. The MLIPs are benchmarked against traditional Buckingham and ReaxFF potentials in terms of energy accuracy, density predictions, thermal equilibration behavior, threshold displacement energy (E d ), tritium diffusivity, and computational cost. Among the models, MTP shows the best overall balance between efficiency and accuracy, with low force and energy errors and realistic E d values for Li and Al. The ACE and MACE (pretrained and trained from scratch) models exhibit high E d (>200 eV) and unphysical pair interactions. DeePMD underestimates Ed due to overly repulsive behavior even at equilibrium distances. All models over-estimate tritium diffusion but the pretrained MACE model behaves well during tritium-diffusion simulations up to 500 K, maintaining diffusivities in the physically consistent 10 −11 m 2 /s range. Finally, we quantify the computational cost of each potential in large-scale atomic/molecular massively parallel simulator, finding that only MTP is more efficient than traditional empirical potentials, while others are significantly more expensive. These findings explain the trade-offs between accuracy and computational cost in MLIP development and provide essential guidance for use in high-throughput radiation damage and gas diffusion simulations in nuclear ceramics.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2026

Adiabatic fast passage spin manipulation measurements in solid polarized targets

Adiabatic fast passage (AFP) is a rapid method for reversing nuclear polarization and manipulating spin populations in polarized solid targets, avoiding the long repolarization times associated with dynamic nuclear polarization (DNP). We report AFP measurements in a 5 T, 1 K polarized-target system for irradiated 15 NH 3 , irradiated 14 ND 3 , and butanol-based materials prepared either with TEMPO doping or by irradiation. We also present a joint manipulated-lineshape analysis for spin-1 targets and demonstrate that vector and tensor polarizations can be extracted from AFP-manipulated deuteron NMR spectra even when the populations are not described by a single Boltzmann spin temperature. In conclusion, we report a reproducible polarization- and direction-dependent AFP response in a large irradiated 15 NH 3 sample. These ammonia results are presented as empirical observations under the specific sample–coil conditions of the experiment, with possible circuit-mediated mechanisms such as radiation damping or superradiant behavior discussed but not assigned as a definitive cause.

Adiabatic fast passage↗

DOE OSTI2026

Comparison between explicit and implicit discretization strategies for a dissipative thermal environment

We investigate strategies for simulating open quantum systems coupled to dissipative baths by comparing explicit wave function-based discretization [via multi-layer multi-configuration time-dependent Hartree (ML-MCTDH)] and the implicit density matrix-based master equation method [via tree tensor network hierarchical equations of motion (TTN-HEOM)]. For dissipative baths characterized by exponentially decaying bath correlation functions, the implicit discretization approach of HEOM—rooted in bath correlation function decompositions—proves significantly more efficient than explicit discretization of the bath into discrete harmonic modes. Explicit methods, like ML-MCTDH, require extensive mode discretization to approximate continuum baths, leading to computational bottlenecks. Case studies for two-level systems and a Fenna–Matthews–Olson complex model highlight TTN-HEOM’s superiority in capturing dissipative dynamics with relaxations with a minimal number of auxiliary modes, while the explicit methods are as exact as the HEOM in pure dephasing regimes. This comparison is enabled by the TENSO package, which has both ML-MCTDH and TTN-HEOM implemented using the same computational structure and propagation strategy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Lunar accelerometer network gravitational observatory (LANGO)

With ground-based interferometers detecting hundreds of gravitational-wave (GW) events, GW astronomy has continued to blossom. U.S. and European scientists are developing plans to construct third-generation ground-based interferometers. ESA has proceeded through the mission formulation phase of space-based interferometer in a lower-frequency band, 10 –4 –0.1 Hz. Despite all these exciting developments, there is still a missing frequency band, 0.1–10 Hz. This mid-frequency band is rich with interesting astrophysical events. Coalescence and merger of intermediate-mass black holes (IMBHs) will occur in this frequency band. Coalescing stellar-mass BHs will pass through this frequency band days before they reach the frequency band of LIGO and Virgo. Detection of such signals would enable a mid-frequency detector to issue an advance notice to the high-frequency GW detectors, as well as to optical, x-ray and γ-ray telescopes. We propose Lunar Accelerometer Network Gravitational Observatory (LANGO) to detect GWs in this frequency band. In the first phase (LANGO 1), we propose to deploy four ambient-temperature (250 K) accelerometers in the tetrahedral or in a square configuration on the hemisphere facing the Earth. After successful operation at 250 K, LANGO would be upgraded to a cryogenic (4 K) version with over two orders of magnitude increased sensitivity (LANGO 2), with coherent rejection of seismic noise implemented. LANGO is a full-tensor detector, capable of determining the source direction and wave polarization. Each test mass (TM) is suspended as a pendulum with resonance frequency ∼ 0.01 Hz, thus is only weakly coupled to the lunar surface horizontally. LANGO is designed to detect the relative motion of globally separated, nearly free, TMs by using the Moon as a large quiet platform. LANGO 1 and 2 accelerometers aim at sensitivities ⩽ 10 –11 m s –2 Hz –1/2 and ⩽ 10 –13 m s –2 Hz –1/2 in the horizontal axes over the frequency band of 1 mHz–10 Hz, which yield GW sensitivities 1.1 x 10 -21 Hz -1/2 and 3.8 x 10 -24 Hz -1/2 at 1 Hz, respectively. The LANGO accelerometers will be 10 3 –10 5 times more sensitive than Apollo seismometers. With such sensitivity, LANGO will also make great contribution to the advancement of lunar geophysics.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Learning to classify quantum phases of matter with a few measurements

We study the identification of quantum phases of matter, at zero temperature, when only part of the phase diagram is known in advance. Following a supervised learning approach, we show how to use our previous knowledge to construct an observable capable of classifying the phase even in the unknown region. By using a combination of classical and quantum techniques, such as tensor networks, kernel methods, generalization bounds, quantum algorithms, and shadow estimators, we show that, in some cases, the certification of new ground states can be obtained with a polynomial number of measurements. An important application of our findings is the classification of the phases of matter obtained in quantum simulators, e.g. cold atom experiments, capable of efficiently preparing ground states of complex many-particle systems and applying simple measurements, e.g. single qubit measurements, but unable to perform a universal set of gates.

quantum machine learning↗

DOE OSTI2025

Violation of energy conditions and the gravitational radius of the proton

The energy-momentum tensor (EMT) of the proton encodes fundamental information about its mass, pressure, and shear distributions. Using recent lattice QCD data for the gravitational form factors, we show that the Breit-frame Wigner EMT may be of Hawking-Ellis type IV in the proton’s core. Such EMT violates all pointwise energy conditions and lacks a causal rest frame so that the usual mechanical picture fails at short distances. We define the —a new hadronic observable—marking the scale where the EMT becomes ordinary (type I) and the classical interpretation is restored. We also derive from the averaged null energy condition nonperturbative, model-independent quantum field theory constraints on gravitational form factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Trace anomaly form factors from lattice QCD

The hadron mass can be obtained through the calculation of the trace of the energy-momentum tensor in the hadron which includes the trace anomaly and sigma terms. The anomaly due to conformal symmetry breaking is believed to be an important ingredient for hadron mass generation and confinement. In this work, we will present the calculation of the glue part of the trace anomaly form factors of the pion up to Q 2 ∼ 4.3 GeV 2 and the nucleon up to Q 2 ∼ 1 GeV 2 . The calculations are performed on a domain wall fermion ensemble with overlap valence quarks at seven valence pion masses varying from ∼ 250 to ∼ 540 MeV , including the unitary point ∼ 340 MeV . We calculate the radius of the glue trace anomaly for the pion and the nucleon from the z expansion. By performing a two-dimensional Fourier transform on the glue trace anomaly form factors in the infinite momentum frame with no energy transfer, we also obtain their spatial distributions for several valence quark masses. The results are qualitatively extrapolated to the physical valence pion mass with systematic errors from the unphysical sea quark mass, discretization effects in the renormalization sum rule, and finite-volume effects to be addressed in the future. We find the pion’s form factor changes sign, as does its spatial distribution, for light quark masses. This explains how the trace anomaly contribution to the pion mass approaches zero toward the chiral limit. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Mass gaps of a Z 3 gauge theory with three fermion flavors in 1 + 1 dimensions

We consider a Z 3 gauge theory coupled to three degenerate massive flavors of fermions, which we term Quantum Z(3) Dynamics, QZD. The spectrum can be computed in 1 + 1 dimensions using tensor networks. In weak coupling the spectrum is that of the expected mesons and baryons, although the corrections in weak coupling are nontrivial, analogous to those of nonrelativistic QED in 1 + 1 dimensions. In strong coupling, besides the usual baryon, the singlet meson is a baryon-antibaryon state. For two special values of the coupling constant, the lightest baryon is degenerate with the lightest octet meson, and the lightest singlet meson, respectively. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Probing celestial energy and charge correlations through real-time quantum simulations: Insights from the Schwinger model

Motivated by recent developments in the application of light-ray operators (LROs) in high energy physics, we propose a new strategy to study correlation functions of LROs through real-time quantum simulations. We argue that quantum simulators provide an ideal laboratory to explore the properties LROs in lower-dimensional quantum field theories. This is exemplified in the 1 + 1 -d Schwinger model, employing tensor network methods, focusing on the calculation of energy and charge correlators. Despite some challenges in extracting the necessary correlation functions from the lattice, the methodology used can be extended to real quantum devices. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Spectral gaps of two- and three-dimensional many-body quantum systems in the thermodynamic limit

We present an expression for the spectral gap, opening up new possibilities for performing and accelerating spectral calculations of quantum many-body systems. We develop and demonstrate one such possibility in the context of tensor network simulations. Our approach requires only minor modifications of the widely used simple update method and is computationally lightweight relative to other approaches. We validate it by computing spectral gaps of the 2D and 3D transverse-field Ising models and find strong agreement with previously reported perturbation theory results. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Almost strong zero modes at finite temperature

Interacting fermionic chains exhibit extended regions of topological degeneracy of their ground states as a result of the presence of Majorana or parafermionic zero modes localized at the edges. In the opposite limit of infinite temperature, the corresponding nonintegrable spin chains, obtained via generalized Jordan-Wigner mapping, are known to host so-called almost strong zero modes, which are long-lived with respect to any bulk excitations. Here we study the fairly unexplored territory that bridges these two extreme cases of zero and infinite temperature. We blend two established techniques for states, the Lanczos series expansion and a tensor network ansatz, uplifting them to the level of operator algebra. This allows us to efficiently simulate large system sizes for arbitrarily long timescales and to extract the temperature-dependent decay rates. We observe that for the Kitaev-Hubbard model, the decay rate of the edge mode depends exponentially on the inverse temperature 𝛽, and on an effective energy scale Δ eff that is greater than the thermodynamic gap of the system Δ.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Uncovering hidden bias in neutron diffraction residual strain measurements

When calculating residual strain via neutron or X-ray diffraction, uncertainties propagated from the peak fit are often inadequate to describe the true scatter of measurements about a singular strain state, such as one that should describe a macroscopic continuum. Because diffraction is inherently a selective process, orientation-dependent scatter arises from the sub-sampling of strong microstructure and strain gradients. This paper investigates the appropriateness of propagated uncertainties with reference to their original intention, i.e. noise about a mean value. Thirty-six unique orientations of strain measurements are taken at multiple locations within an additive friction-stir deposition component with fine-scale gradients (∼200 µm) of plastic strain, texture and residual elastic strain. Multiple strain and stress calculation pathways are compared: direct substitution of three measurements into Hooke's law, direct inversion of any six unique orientations into the strain state tensor and thirty-six measurement least-squares estimation. For the last two cases, the appropriateness of the uncertainty interval is statistically evaluated on the basis of a physical constraint: common agreement under the strain transformation law. For this sample, the direct inversion of six measurements retains a conservative estimate of the uncertainty. However, propagated uncertainties in the least-squares solution greatly underestimate the true experimental scatter. A simple pathway to estimate appropriate uncertainty intervals is suggested. These results demonstrate that the interpretation of uncertainty in residual strain is strongly dependent on intrinsic sample-dependent effects, and that oversampling orientations and statistical analysis can give more accurate results with realistic uncertainties.

36 MATERIALS SCIENCE↗