Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transport methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Evaluation of the Pool Critical Assembly Benchmark with Explicitly-Modeled Geometry using MCNP6

Despite being one of the most widely used benchmarks for qualifying light water reactor (LWR) radiation transport methods and data, no benchmark calculation of the Oak Ridge National Laboratory (ORNL) Pool Critical Assembly (PCA) pressure vessel wall benchmark facility (PVWBF) using MCNP6 with explicitly modeled core geometry exists. As such, this paper provides results for such an analysis. First, a criticality calculation is used to construct the fixed source term. Next, ADVANTG-generated variance reduction parameters are used within the final MCNP6 fixed source calculations. These calculations provide unadjusted dosimetry results using three sets of dosimetry reaction cross sections of varying ages (those packaged with MCNP6, from the IRDF-2002 multi-group library, and from the ACE-formatted IRDFF v1.05 library). These results are then compared to two different sets of measured reaction rates. The comparison agrees in an overall sense within 2% and on a specific reaction- and dosimetry location-basis within 5%. Except for the neptunium dosimetry, the individual foil raw calculation-to-experiment comparisons usually agree within 10% but is typically greater than unity. Finally, in the course of developing these calculations, geometry that has previously not been completely specified is provided herein for the convenience of future analysts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Unusual effects of Be doping in the iron-based superconductor FeSe

Recent superconducting transition temperatures (T c ) over 100 K for monolayer FeSe on SrTiO 3 have renewed interest in the bulk parent compound. In KCl:AlCl 3 flux-transport-grown crystals of FeSe 0.94 Be 0.06 , FeSe 0.97 Be 0.03 and, for comparison, FeSe, this work reports doping of FeSe using Be—among the smallest of possible dopants, corresponding to an effective 'chemical pressure'. According to lattice parameter measurements, 6% Be doping shrank the tetragonal FeSe lattice equivalent to a physical pressure of 0.75 GPa. Using this flux-transport method of sample preparation, 6% of Be was the maximum amount of dopant achievable. At this maximal composition of FeSe 0.94 Be 0.06 , the lattice unit cell shrinks by 2.4%, T c —measured in the bulk via specific heat—increases by almost 10%, the T c versus pressure behavior shifts its peak T$onset\atop{c}$downwards by ~1 GPa, the high temperature structural transition around T S = 89 K increases by 1.9 K (in contrast to other dopants in FeSe which uniformly depress T S), and the low temperature specific heat γ increases by 10% compared to pure FeSe. Also, upon doping by 6% Be the residual resistivity ratio, ρ(300 K)/ρ(T → 0), increases by almost a factor of four, while ρ(300 K)/ρ(T=$+\atop{c}$) increases by 50%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-field inflation with random potentials: field dimension, feature scale and non-Gaussianity

We explore the super-horizon evolution of the two-point and three-point correlation functions of the primordial density perturbation in randomly-generated multi-field potentials. We use the Transport method to evolve perturbations and give full evolutionary histories for observables. Identifying the separate universe assumption as being analogous to a geometrical description of light rays, we give an expression for the width of the bundle, thereby allowing us to monitor evolution towards the adiabatic limit, as well as providing a useful means of understanding the behaviour in f{sub NL}. Finally, viewing our random potential as a toy model of inflation in the string landscape, we build distributions for observables by evolving trajectories for a large number of realisations of the potential and comment on the prospects for testing such models. We find the distributions for observables to be insensitive to the number of fields over the range 2 to 6, but that these distributions are highly sensitive to the scale of features in the potential. Most sensitive to the scale of features is the spectral index, with more than an order of magnitude increase in the dispersion of predictions over the range of feature scales investigated. Least sensitive was the non-Gaussianity parameter f{sub NL}, which was consistently small; we found no examples of realisations whose non-Gaussianity is capable of being observed by any planned experiment.

79 ASTRONOMY AND ASTROPHYSICS↗

Multifield consequences for D-brane inflation

We analyse the multifield behaviour in D-brane inflation when contributions from the bulk are taken into account. For this purpose, we study a large number of realisations of the potential; we find the nature of the inflationary trajectory to be very consistent despite the complex construction. Inflation is always canonical and occurs in the vicinity of an inflection point. Extending the transport method to non-slow-roll and to calculate the running, we obtain distributions for observables. The spectral index is typically blue and the running positive, putting the model under moderate pressure from WMAP7 constraints. The local f{sub NL} and tensor-to-scalar ratio are typically unobservably small, though we find approximately 0.5% of realisations to give observably large local f{sub NL}. Approximating the potential as sum-separable, we are able to give fully analytic explanations for the trends in observed behaviour. Finally we find the model suffers from the persistence of isocurvature perturbations, which can be expected to cause further evolution of adiabatic perturbations after inflation. We argue this is a typical problem for models of multifield inflation involving inflection points and renders models of this type technically unpredictive without a description of reheating.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic order in the van der Waals magnet VCl 3

Here, we investigated the structural and magnetic properties of single-crystalline VCl 3 , a newly synthesized member of the vanadium trihalide family. High-quality single crystals were grown by the chemical vapor transport method, and their behavior was characterized using neutron diffraction and thermodynamic measurements. We show that VCl 3 crystallizes in the BiI 3 -type structure at room temperature and undergoes a structural phase transition at 𝑇 𝑆 = 103.7⁢(5)⁢K that lowers the lattice symmetry, followed by a zigzag antiferromagnetic order with a propagation vector 𝑘 = (0,0.5,1) below 𝑇 𝑁 = 21.8⁢(1)⁢K. Neutron diffraction experiments indicate that the ordered moments are canted by approximately 21° away from the 𝑐 axis toward the 𝑎 axis, yielding a total moment of approximately 1.09⁢(2) ⁢𝜇 B /V 3+ . Field-dependent magnetization along the 𝑐 axis exhibits a half magnetization plateau, indicative of a field-stabilized fractional state. These results establish VCl 3 as a new platform for exploring structural transitions, anisotropic magnetism, and field-induced phases in vanadium-based honeycomb magnets.

Kao, Zeyu [Fudan Univ., Shanghai (China)]↗

Critical behavior in monoclinic Cr 3 ⁢Te 4

High-quality monoclinic Cr 3 ⁢Te 4 crystals are synthesized by the chemical vapor transport method and confirmed by synchrotron powder x-ray diffraction. Critical behaviors of Cr 3 ⁢Te 4 are studied by bulk isothermal magnetization measurements around its paramagnetic to ferromagnetic phase transition. From these data, we evaluate the modified Arrott plot, the Kouvel-Fisher plot, and critical isotherms, and estimate critical exponent values of β~0.3827, γ~1.2119, and δ~4.16, and the Curie temperature T C ≈321 K. After the scaling, the isothermal magnetization curves below and above the critical temperatures collapse into two independent universal branches which signifies the reliability of our critical exponent estimation. Finally, the estimated critical exponent values of Cr 3 ⁢Te 4 do not match well with theoretically calculated values of any three-dimensional models.

36 MATERIALS SCIENCE↗

Four-phonon scattering significantly reduces intrinsic thermal conductivity of solids

We rigorously calculate intrinsic phonon thermal resistance from four-phonon scattering processesusing rst principles Boltzmann transport methods. Fundamental questions concerning the role ofhigher order scattering at high temperature and in systems with otherwise weak intrinsic scatteringare answered. Using diamond and silicon as benchmark materials, the predicted thermal conductiv-ity including intrinsic four-phonon resistance gives signicantly better agreement with measurementsat high temperatures than previous rst principles calculations. In the predicted ultrahigh thermalconductivity material, zincblende BAs, four-phonon scattering is strikingly strong when comparedto three-phonon processes, even at room temperature, as the latter have an extremely limited phasespace for scattering. Including four-phonon thermal resistance reduces the predicted thermal con-ductivity of BAs from 2200 W/m-K to 1400 W/m-K.

36 MATERIALS SCIENCE↗

Synthesis and physical properties of a new layered ferromagnet Cr 1.21 Te 2

Single crystals of a new layered compound, Cr 1.21 Te 2 , were synthesized via a vapor transport method. The crystal structure and physical properties were characterized by single crystal and powder x-ray diffraction, temperature- and field-dependent magnetization, zero-field heat capacity, and angle-resolved photoemission spectroscopy. Cr 1.21 Te 2 , containing two Cr sites, crystalizes in a trigonal structure with a space group P-3 (No. 147). The Cr site in the interstitial layer is partially occupied. Physical property characterizations indicate that Cr 1.21 Te 2 is metallic with hole pockets at the Fermi energy and undergoes a ferromagnetic phase transition at ~ 173 K. The magnetic moments align along the c axis in the ferromagnetic state. Based on low-temperature magnetization, the spin stiffness constant, D, and spin excitation gap, Δ , were estimated according to Bloch's law to be D = 94 ± 17 meV Å 2 and Δ = 0.45 ± 0.33 meV, suggesting its possible application as a low dimensional ferromagnet.

36 MATERIALS SCIENCE↗

Single crystal growth and thermoelectric properties of Nowotny chimney-ladder compound Fe 2 Ge 3

Fe 2 Ge 3 with an incommensurate Nowotny chimney-ladder (NCL) structure is a promising material for thermoelectric applications due to its low thermal conductivity. Previous experimental studies on Fe 2 Ge 3 have mainly focused on polycrystalline samples, resulting in a limited understanding of the material's intrinsic thermoelectric properties and the underlying causes of its low thermal conductivity. Here we report the synthesis and thermoelectric properties of single crystalline Fe 2 Ge 3 . Millimeter-sized Fe 2 Ge 3 single crystals grown by the chemical vapor transport method enable the study of the intrinsic thermoelectric properties. The Seebeck coefficient of Fe 2 Ge 3 is negative and its magnitude increases linearly with temperature, showing a degenerate n-type semiconductor behavior. Analysis of the electrical resistivity and specific heat data indicates the existence of an Einstein mode with a characteristic temperature of about 60 K, suggesting the presence of low-energy optical phonons. Further, the thermal conductivity of Fe 2 Ge 3 along the c axis is as low as 1.9Wm -1 K -1 at 300 K and exhibits a nearly temperature-independent characteristic, which is distinct from the previous theoretical calculations with a stronger temperature dependence. The low thermal conductivity may be attributed to the scattering of acoustic phonons by low-energy optical modes and the presence of non-extended diffuson modes, as reported in another NCL compound, MnSi 1.74 . This study provides valuable insights into the electrical and thermal properties of Fe 2 Ge 3 , which can open up possibilities for future advances in thermoelectric applications.

36 MATERIALS SCIENCE↗

XY-like incommensurate magnetic order in Ce 2 ⁢SnS 5

We report the synthesis of single crystals of Ce 2 ⁢SnS 5 through a two-stage chemical vapor transport method. The Ce 2 ⁢SnS 5 system is a member of the orthorhombic Pbam (No. 55) space group and realizes a distorted trigonal tricapped prism (TTP) crystal field around each cerium site. We characterized the sample through orientation-dependent magnetization and heat capacity measurements to probe the magnetic anisotropy in the system characteristic of XY-like anisotropic Heisenberg model behavior. Ce 2 ⁢SnS 5 furthermore enters a zero-field ordered phase under 𝑇 𝑁 =2.4 K; powder neutron diffraction measurements reveal incommensurate magnetic order near 𝑇 𝑁 . Furthermore, the system then locks into a commensurate, two-𝑞 magnetic structure below approximately 1.2 K. This commensurate structure belongs to the Shubnikov group 𝑃⁢𝑏′⁢𝑎′⁢𝑚′ ⁡(MSG 55.359) and realizes the propagation vectors $\overrightarrow{𝑞}$ = (1/3, 0, 0) and $\overrightarrow{𝑞}$ = (0, 0, 0).

Antiferromagnetism↗

Experiments and Analyses of Data Transfers Over Wide-Area Dedicated Connections

Dedicated wide-area network connections are increasingly employed in high-performance computing and big data scenarios. One might expect the performance and dynamics of data transfers over such connections to be easy to analyze due to the lack of competing traffic. However, non-linear transport dynamics and end-system complexities (e.g., multi-core hosts and distributed filesystems) can in fact make analysis surprisingly challenging. We present extensive measurements of memory-to-memory and disk-to-disk file transfers over 10 Gbps physical and emulated connections with 0–366 ms round trip times (RTTs). For memory-to-memory transfers, profiles of both TCP and UDT throughput as a function of RTT show concave and convex regions; large buffer sizes and more parallel flows lead to wider concave regions, which are highly desirable. TCP and UDT both also display complex throughput dynamics, as indicated by their Poincare maps and Lyapunov exponents. For disk-to-disk transfers, we determine that high throughput can be achieved via a combination of parallel I/O threads, parallel network threads, and direct I/O mode. Our measurements also show that Lustre filesystems can be mounted over long-haul connections using LNet routers, although challenges remain in jointly optimizing file I/O and transport method parameters to achieve peak throughput.

Rao, Nageswara S.↗

Software-defined quantum network switching

We present the design and implementation of a software-defined quantum networking protocol and software switch integrated with a numerical quantum channel simulator. Our protocol design leverages recent advances in the OpenFlow protocol that enable software-defined control and management of optical network traffic using side-channel metadata. We implement this design using customization of the open source vSwitch for optical network routing, and we test the implementation using a numerical simulator of the quantum channel alongside actual network traffic. Our results support the integration of quantum communication with existing optical transport methods.

Humble, Travis↗

SU-E-T-552: Monte Carlo Calculation of Correction Factors for a Free-Air Ionization Chamber in Support of a National Air-Kerma Standard for Electronic Brachytherapy

Purpose: To use Monte Carlo radiation transport methods to calculate correction factors for a free-air ionization chamber in support of a national air-kerma standard for low-energy, miniature x-ray sources used for electronic brachytherapy (eBx). Methods: The NIST is establishing a calibration service for well-type ionization chambers used to characterize the strength of eBx sources prior to clinical use. The calibration approach involves establishing the well-chamber’s response to an eBx source whose air-kerma rate at a 50 cm distance is determined through a primary measurement performed using the Lamperti free-air ionization chamber. However, the free-air chamber measurements of charge or current can only be related to the reference air-kerma standard after applying several corrections, some of which are best determined via Monte Carlo simulation. To this end, a detailed geometric model of the Lamperti chamber was developed in the EGSnrc code based on the engineering drawings of the instrument. The egs-fac user code in EGSnrc was then used to calculate energy-dependent correction factors which account for missing or undesired ionization arising from effects such as: (1) attenuation and scatter of the x-rays in air; (2) primary electrons escaping the charge collection region; (3) lack of charged particle equilibrium; (4) atomic fluorescence and bremsstrahlung radiation. Results: Energy-dependent correction factors were calculated assuming a monoenergetic point source with the photon energy ranging from 2 keV to 60 keV in 2 keV increments. Sufficient photon histories were simulated so that the Monte Carlo statistical uncertainty of the correction factors was less than 0.01%. The correction factors for a specific eBx source will be determined by integrating these tabulated results over its measured x-ray spectrum. Conclusion: The correction factors calculated in this work are important for establishing a national standard for eBx which will help ensure that dose is accurately and consistently delivered to patients.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atomic-force microscopy and photoluminescence of nanostructured CdTe

Low-dimensional CdTe nanorods with a diameter of 10-30 nm and a high aspect ratio that reaches 100 are studied. The nanorods are grown by the physical vapor transport method with the use of Bi precipitates on the substrates. In addition, thin films of closely packed CdTe nanorods with the transverse dimensions {approx}(100-200) nm are grown. Atomic-force microscopy shows that the cross sections of all of the nanorods were hexagonally shaped. By photoluminescence measurements, the inference about the wurtzite structure of CdTe is supported, and the structural quality, electron-phonon coupling, and defects are analyzed. On the basis of recent ab initio calculations, the nature of defects responsible for the formation of deep levels in the CdTe layers and bulk crystals are analyzed.

36 MATERIALS SCIENCE↗

Solubility of oxygen in CdS single crystals and their physicochemical properties

The specific features of oxygen dissolution in CdS using the example of single crystals grown by the gas-transport method with deviations from stoichiometry at 1100°C are considered. The effect of various types of intrinsic point defects in crystals of different composition on the form in the presence of oxygen is analyzed. It is shown that the most stable composition thermodynamically is that corresponding to nonstoichiometric “self-activated cadmium sulphide” stabilized with oxygen.

36 MATERIALS SCIENCE↗

Dependence of the X-Ray Dosimetric Parameters of AgGaS{sub 2x}Se{sub 2–2x} Single Crystals on Their Composition

It is demonstrated that AgGaS{sub 2x}Se{sub 2–2x} single crystals grown by the chemical transport method are characterized by high X-ray conductivity and X-ray sensitivity coefficients at room temperature. The X-ray dosimetric parameters of crystals are compared. For example, the X-ray conductivity coefficient of AgGaS{sub 2} samples varies within the range of 0.22–3.20 min/R at effective radiation hardness V{sub a} = 25–50 keV and dose rate E = 0.75–78.05 R/min. Single-crystalline AgGaSe{sub 2} samples have higher X-ray dosimetric coefficients than AgGaS{sub 2}-based samples. The X-ray conductivity coefficient of AgGaSe{sub 2} varies within the range of 1.2–8.5 min/R at effective radiation hardness V{sub a} = 25–50 keV and dose rate E = 0.75–31.3 R/min. The dose dependences of steady-state X-ray current in AgGaS{sub 2x}Se{sub 2–2x} are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-fidelity holographic beam shaping with optimal transport and phase diversity

A phase-only spatial light modulator (SLM) provides a powerful way to shape laser beams into arbitrary intensity patterns but at the cost of a hard computational problem of determining an appropriate SLM phase. Here, we show that optimal transport methods can generate approximate solutions to this problem that serve as excellent initializations for iterative phase retrieval algorithms, yielding vortex-free solutions with superior accuracy and efficiency. Additionally, we show that analogous algorithms can be used to measure the intensity and phase of the input beam incident upon the SLM via phase diversity imaging. These techniques furnish flexible and convenient solutions to the computational challenges of beam shaping with an SLM.

47 OTHER INSTRUMENTATION↗

Persistent photoconductivity in two-dimensional Mo 1-x W x Se 2 –MoSe 2 van der Waals heterojunctions

Van der Waals (vdW) heterojunctions consisting of vertically-stacked individual or multiple layers of two-dimensional (2D) layered semiconductors, especially the transition metal dichalcogenides (TMDs), are fascinating new artificial solids just nanometers-thin that promise novel optoelectronic functionalities due to the sensitivity of their electronic and optical properties to strong quantum confinement and interfacial interactions. Here, monolayers of n-type MoSe 2 and p-type Mo 1-x W x Se 2 –MoSe 2 are grown by vapor transport methods, then transferred and stamped to form artificial vdW heterostructures with different interlayer orientations. Atomic-resolution Z-contrast electron microscopy and electron diffraction are used to characterize both the individual monolayers and the atomic registry between layers in the bilayer vdW heterostructures. These measurements are compared with photoluminescence and low-frequency Raman spectroscopy, which indicates strong interlayer coupling in heterostructures. Remarkably, the heterojunctions exhibit an unprecedented photoconductivity effect that persists at room temperature for several days. This persistent photoconductivity is shown to be tunable by applying a gate bias that equilibrates the charge distribution. Furthermore, these measurements indicate that such ultrathin vdW heterojunctions can function as rewritable optoelectronic switches or memory elements under time-dependent photo-illumination, an effect which appears promising for new monolayer TMDs-based optoelectronic devices applications.

36 MATERIALS SCIENCE↗