Search NASA⌕ Search

SEARCH · Search NASA

Results for “Viewpoints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A Review of Magneto-Elastic Interaction and Its Theoretical Descriptions in Type-II Superconductors

It is well known that the interaction between defect-induced strain field and vortex lattice (VL) gives rise to vortex pinning behaviors. Likewise, magneto-elastic (ME) interaction is caused by the difference between specific volumes of normal phase and superconducting (SC) phase. Acting as inhomogeneous strain sources, the normal-state vortex cores produce local deformation in the surrounding SC matter and thus affect VL energy. ME interaction belongs to the fundamental physics of interdependences between vortex matter and crystal lattice. The review starts with the effects of ME interaction on magnetization, vortex morphology and intervortex interaction. In Sect. 2, theoretical descriptions of ME interaction are classified in terms of different simplifications. The core ideas and outstanding results of these theories are given. It is followed by Sect. 3, where the correlation and difference between ME and pinning interaction are outlined. Although pinning differs from ME interaction in their formation mechanisms, the pinning interaction is established upon the vortex-induced strain field from Ginzburg-Landau (GL) viewpoint. Section 4 goes further with the GL treatment for solving ME and pinning problem; the general thoughts and steps can be found in this section. The last section gives some outlooks which involve pressure dependence of T{sub c} and anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ergodicity Breaking and Localization of the Nicolai Supersymmetric Fermion Lattice Model

We investigate dynamics of a supersymmetric fermion lattice model introduced by Nicolai (J Phys A 9:1497–1505, 1976). We show that the Nicolai model has infinitely many local constants of motion for its Heisenberg time evolution, and therefore ergodicity (with respect to thermal equilibrium states) breaks. It has infinitely many degenerated classical ground states. This phenomena is considered as localization at zero temperature. From a viewpoint of perturbation theory, we explain why delocalization is suppressed at zero temperature despite its disorder-free translation-invariant quantum interaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum dots in proteomic studies and medical diagnostics

Modern medical diagnostics requires the detection of minor amounts of target proteins at the background of numerous different biological components. With rare exception, these problems cannot be solved by purely physical research methods. In this case, the simplest and efficient approach is concerned with the principles of complementary affine interactions of biopolymers. In this case, high sensitivity of the analysis is achieved by the introduction of labels with certain physical properties in affinity bioreagents. This review is focused on the development of proteomic studies and medical diagnostics with the use of colloidal quantum dots (QDs) as labels in affinity bioreagents. This review is devoted to the description of in vitro proteomic approaches used in the studies and diagnostics, where the problem related to toxicity is not as crucial as in therapy and no restrictions on the types and composition of QDs are imposed. In this case, QDs are considered to be one of the key components of a bioanalytical system. The problems of proteomic medical diagnostics are discussed from the viewpoint of analytical chemistry with the account for the structure and properties of macromolecular analytes and appropriate bioreagents.

60 APPLIED LIFE SCIENCES↗

Elastic Properties of Lithium and Sodium Amides

This paper presents the optimization of the structural parameters of tetragonal and orthorhombic crystals α-LiNH{sub 2} and α-NaNH{sub 2} and computation of elastic constants and flexibility coefficients using the all-electron implementation of the Gaussian and augmented plane wave density functional method. The obtained elastic constants satisfy all conditions of mechanical stability of LiNH{sub 2} and α-NaNH{sub 2} crystals. From the viewpoint of elastic properties, α-LiNH{sub 2} crystal is isotropic, while α-NaNH{sub 2} crystal is rather anisotropic. Anisotropy under compression in α-NaNH{sub 2} crystal is higher than that under shear. The former is brittle, the latter is more plastic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy level shifts at the silica/Ru(0001) heterojunction driven by surface and interface dipoles

Charge redistribution at heterogeneous interfaces is a fundamental aspect of surface chemistry. Manipulating the amount of charges and the magnitude of dipole moments at the interface in a controlled way has attracted tremendous attention for its potential to modify the activity of heterogeneous catalysts in catalyst design. Two-dimensional ultrathin silica films with well-defined atomic structures have been recently synthesized and proposed as model systems for heterogeneous catalysts studies. R. Wlodarczyk et al. (Phys. Rev. B, 85, 085403 (2012)) have demonstrated that the electronic structure of silica/Ru(0001) can be reversibly tuned by changing the amount of interfacial chemisorbed oxygen. Here we carried out systematic investigations to understand the underlying mechanism through which the electronic structure at the silica/Ru(0001) interface can be tuned. As corroborated by both in situ X-ray photoelectron spectroscopy and density functional theory calculations, the observed interface energy level alignments strongly depend on the surface and interfacial charge transfer induced dipoles at the silica/Ru(0001) heterojunction. These observations may help to understand variations in catalytic performance of the model system from the viewpoint of the electronic properties at the confined space between the silica bilayer and the Ru(0001) surface. As a result, the same behavior is observed for the aluminosilicate bilayer, which has been previously proposed as a model system for zeolites.

2D zeolites↗

Revisiting the ODE Method for Recursive Algorithms: Fast Convergence Using Quasi Stochastic Approximation

Several decades ago, Profs. Sean Meyn and Lei Guo were postdoctoral fellows at ANU, where they shared interest in recursive algorithms. It seems fitting to celebrate Lei Guo's 60th birthday with a review of the ODE Method and its recent evolution. The method has been regarded as a technique for algorithm analysis. It is argued that this viewpoint is backwards: The original stochastic approximation method was surely motivated by an ODE, and tools for analysis came much later (based on establishing robustness of Euler approximations). The paper presents a brief survey of recent research in machine learning that shows the power of algorithm design in continuous time, following by careful approximation to obtain a practical recursive algorithm. While these methods are usually presented in a stochastic setting, this is not a prerequisite. In fact, recent theory shows that rates of convergence can be dramatically accelerated by applying techniques inspired by quasi Monte-Carlo. Subject to conditions, the optimal rate of convergence can be obtained by applying the averaging technique of Polyak and Ruppert. The conditions are not universal, but theory suggests alternatives to achieve acceleration. The theory is illustrated with applications to gradient-free optimization, and policy gradient algorithms for reinforcement learning.

learning and adaptive systems in artificial intell↗

Predicting Thermal Conductivity Evolution of Polycrystalline Materials Under Irradiation Using Multiscale Approach

A multiscale methodology was developed to predict the evolution of thermal conductivity of polycrystalline fuel under irradiation. In the mesoscale level, phase field model was used to predict the evolution of gas bubble microstructure. Generation of gas atoms and vacancies were taken into consideration. In the macroscopic scale, a statistical continuum mechanics model was applied to predict the anisotropic thermal conductivity evolution during irradiation. Microstructure predicted by phase field model was fed into statistical continuum mechanics model to predict properties and behavior. Influence of irradiation intensity, exposition time and morphology were investigated. This approach provides a deep understanding on microstructure evolution and property prediction from a basic scientific viewpoint.

36 MATERIALS SCIENCE↗

Improving the Desulphurization in COREX Process by Adjusting the Hot Metal Chemical Composition

The COREX process, which has many advantages, still has high and fluctuating sulfur levels in the hot metal. To overcome the desulfurization problems, several measures were proposed, and the adjustments of chemical compositions of hot metal were explained in the current study. Theoretical calculations and experimental results showed that increments in either of or both silicon and manganese levels were beneficial to the desulfurization from the thermodynamic viewpoint. However, high silicon content would increase the costs of the coal of COREX process and did not meet the requirements of dephosphorization and low slag content in steelmaking. Besides, superfluous manganese was also unnecessary as it would increase the costs of COREX. Therefore, the existing silicon content should be decreased (< 1.5 pct), and the manganese content should be increased in a suitable range (from 0.6 to 0.8 pct) for COREX-3000 in China.

01 COAL, LIGNITE, AND PEAT↗

Transition of Blast Furnace Slag from Silicate Based to Aluminate Based: Density and Surface Tension

The effects of the Al{sub 2}O{sub 3} concentration and Al{sub 2}O{sub 3}/SiO{sub 2} ratio on the density and surface tension of molten aluminosilicate CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-9 mass pct MgO-1 mass pct TiO{sub 2} slag were investigated at temperatures from 1723 K to 1823 K (1450 °C to 1550 °C) using the Archimedean method and the maximum bubble pressure (MBP) technique, respectively. The mechanism of the changes in density and surface tension with composition was analyzed from the viewpoint of the degree of polymerization in the structure and the types of oxygen species in the melts. At a fixed CaO/SiO{sub 2} ratio of 1.20, the density decreased with increasing Al{sub 2}O{sub 3} content up to 25 mass pct, subsequently increasing. Increasing the Al{sub 2}O{sub 3}/SiO{sub 2} ratio from 0.47 to 0.92 caused an increase in the density at a fixed CaO content, and the density decreased slightly when the Al{sub 2}O{sub 3}/SiO{sub 2} ratio was greater than 0.92. Based on the structural information, the density decreased when the Al{sub 2}O{sub 3} content enhanced the network structure and increased when the (Q{sub 2} + Q{sub 3})/(Q{sub 0} + Q{sub 1}) ratio and structural complexity decreased. The surface tension increased with increasing Al{sub 2}O{sub 3} content and Al{sub 2}O{sub 3}/SiO{sub 2} ratio. On the one hand, the surface-active component of SiO{sub 2} decreased; on the other hand, the concentration of [AlO{sub 4}]{sup 5−} tetrahedra and metal cations that act as charge compensators increased at the melt surface. A model based on the anionic and cationic radii and the Butler equation was employed to predict the surface tension, and an iso-surface tension diagram was obtained at 1773 K (1500 °C).

36 MATERIALS SCIENCE↗

Thermodynamic Analysis of Deoxidation of Titanium Through the Formation of Rare-Earth Oxyfluorides

In this work, the possibility of the direct removal of oxygen species from metallic Ti through the formation of rare-earth oxyfluorides has been investigated from a thermodynamic viewpoint. The deoxidation limit of β-Ti using rare-earth metals (M: Y, La, Ce, and Nd) as deoxidants was evaluated. It was found that Ti metal with an oxygen concentration of 200 mass ppm or less could be theoretically obtained under the M/MOF/MF{sub 3} equilibrium at 1300 K (1027 °C), which suggested a possibility of reducing the oxygen content in Ti below 500 mass ppm utilizing a fluoride-based molten salt. Furthermore, a new deoxidation process, in which oxygen was removed in the form of MOF compounds using Mg deoxidant, was discussed as well. The obtained results revealed that the oxygen content in β-Ti could be theoretically reduced to a level below 1000 mass ppm using a MF{sub 3}-containing molten salt equilibrated with Mg. Rare-earth metals and their alloys are usually produced by the electrolysis in a fluoride-based molten salt; hence, the modern industrial electrolysis techniques can be potentially utilized for deoxidizing Ti scrap.

36 MATERIALS SCIENCE↗

Deoxidation of Titanium Using Mg as Deoxidant in MgCl{sub 2}-YCl{sub 3} Flux

To reduce the oxygen level in titanium (Ti) to less than 1000 mass ppm O, using magnesium as the deoxidant at 1300 K (1027 °C), the activity of the deoxidation product (MgO), i.e., a{sub MgO}, in the system must be reduced to less than 0.04, from a thermodynamic viewpoint. In this study, we developed a new deoxidation technique for Ti, by adding yttrium chloride (YCl{sub 3}) to magnesium chloride (MgCl{sub 2}) flux, which effectively decreases and maintains the a{sub MgO} in the system at a low level, via the formation of yttrium oxychloride (YOCl). Through thermodynamic assessment using a p{sub O{sub 2}}-p{sub Cl{sub 2}} diagram, as well as experiments, the deoxidation of Ti to an oxygen level below 1000 mass ppm O, via the reaction O (in Ti) + Mg + YCl{sub 3} → MgCl{sub 2} + YOCl, was confirmed. Furthermore, using the E-pO{sup 2−} diagram of the M-O-Cl system (M = Y, Mg), the possibility of electrochemical deoxidation is discussed. In the MgCl{sub 2}-YCl{sub 3} flux, Mg deposits on the Ti cathode and simultaneously deoxidizes it. The activity of the deoxidation product, MgO, decreases due to the formation of YOCl and/or the electrochemical oxidation of oxide ions on the carbon anode; thus, the deoxidation of Ti becomes feasible. This new deoxidation technique using rare-earth-containing MgCl{sub 2} flux can be applied to the recycling of Ti scraps, in the future.

36 MATERIALS SCIENCE↗

Characterization of Inclusions in 3rd Generation Advanced High-Strength Steels

Samples taken from laboratory-produced 3rd generation advanced high-strength steels, solidified at a low cooling rate, have been investigated to study the characteristics of non-metallic inclusions. Two steels, containing 2 and 5 pct Mn content, were produced for this purpose. A higher number of total inclusions were observed in 5 pct Mn steel. The four main types of inclusions observed were Al{sub 2}O{sub 3}, AlN, MnS, and AlSiMn-oxide. These classes were divided into subclasses according to variations in their chemistry. The major subclasses of AlN inclusions are either plate-like or regular in shape and have different size distributions. Thermodynamic calculations suggest that plate-like AlN inclusions are formed at the initial stage of solidification, while faceted/regular-shaped inclusions are precipitated toward the end of solidification. Moreover, it was found that the size of nitride inclusions is related to their N content. This phenomenon is discussed from the viewpoint of nucleation theory.

36 MATERIALS SCIENCE↗

Cationic Effect of Ferrous Ions on Sulfide Capacity of CaO-Fe{sub t}O-Al{sub 2}O{sub 3}-SiO{sub 2} Slag System

The cationic effect of ferrous ions on the sulfide capacity of CaO-Fe{sub t}O-Al{sub 2}O{sub 3}-SiO{sub 2} slags was studied from the viewpoint of the ionic structure in the slag using micro-Raman spectroscopy. In the cation-excess region (M{sup 2+}/2(Fe{sup 3+} + Al{sup 3+}) > 1.0), the sulfide capacity was directly proportional to the basicity of the slags, owing to the S{sup 2−} stabilizing effect of excess cations. However, in the cation-deficient region (M{sup 2+}/2(Fe{sup 3+} + Al{sup 3+}) < 1.0), the sulfide capacity was independent of the basicity of the slags owing to the deficiency of cations required for charge compensation with Al{sup 3+} and Fe{sup 3+}. The cation-substitution effect on the sulfide capacity of the CaO-rich slags (Fe{sub t}O/(Fe{sub t}O + CaO < 0.5) exhibited a linear relationship with the Fe{sup 2+} content because Fe{sup 2+} had a stronger affinity with S{sup 2−} compared to that with Ca{sup 2+}. However, in the Fe{sub t}O-rich slags (Fe{sub t}O/(Fe{sub t}O + CaO > 0.5), the sulfide capacity decreased with the increase of the Fe{sup 2+} content owing to the Q{sup n} unit affinity of the Fe{sup 2+} ion. The sulfide capacity was determined by the competition between the Q{sup n} unit affinity and stability of the S{sup 2−} ion, depending on the type of cation. Therefore, the partial covalent bonding between the M{sup 2+} cations (M: Ca, Fe) and aluminosilicate affected the ionic interactions with the S{sup 2−} ions.

36 MATERIALS SCIENCE↗

A Micro-Mechanism-Based Continuum Corrosion Fatigue Damage Model for Steels

A micro-mechanism-based corrosion fatigue damage model is developed for studying the high-cycle corrosion fatigue of steel from multi-scale viewpoint. The developed physical corrosion fatigue damage model establishes micro-macro relationships between macroscopic continuum damage evolution and collective evolution behavior of microscopic pits and cracks, which can be used to describe the multi-scale corrosion fatigue process of steel. As a case study, the model is used to predict continuum damage evolution and number density of the corrosion pit and short crack of steel component in 5% NaCl water under constant stress amplitude at 20 kHz, and the numerical results are compared with experimental results. It shows that the model is effective and can be used to evaluate the continuum macroscopic corrosion fatigue damage and study microscopic corrosion fatigue mechanisms of steel.

36 MATERIALS SCIENCE↗

Ultra-Shallow Doping B, Mg, Ni, Cu, Mn, Cr and Fe into SiC with Very High Surface Concentrations Based on Plasma Stimulated Room-Temperature Diffusion

Very recently, we reported a novel doping method called plasma doping without any external bias (PDWOEB) for the introduction of some impurities into Si and GaN at room temperature (RT). In this work, the RT doping of some impurities, including B, Mg, Ni, Cu, Mn, Cr and Fe, into SiC with ultra-shallow depths of tens of nanometer and very high surface concentrations, approaching or exceeding 1E20/cm{sup 3}, by using PDWOEB is reported. It has been found for the first time that the doping depths and surface concentrations of these impurities doped into SiC by the PDWOEB increase drastically with increasing doping time and the ferromagnetism of SiC due to Ni doping is demonstrated. Moreover, the approximate diffusivities of B, Mg, Ni, Cu, Mn, Cr and Fe in SiC at RT under plasma stimulation are obtained. The physical mechanism of PDWOEB is further discussed, and some unclear viewpoints are clarified.

36 MATERIALS SCIENCE↗

Effect of Solution pH on Layered Double Hydroxide Formation on Electrogalvanized Steel Sheets

The effect of solution pH on layered double hydroxide (LDH) formation on electrogalvanized steel sheets (EG steel) was investigated in this study. EG steel with a Zn coating weight of 64 g/m{sup 2} was used as a substrate and was immersed in a 0.25 M Na{sub 2}Al{sub 2}O{sub 4}-based solution having several pH values to form a Zn-Al-based LDH conversion coating. After rinsing and drying, corrosion resistance was evaluated by EIS. It was found that corrosion resistance increased with increasing pH up to pH 12.6. However, above this pH, corrosion resistance tended to display a sharp decrease. To understand this trend, the conversion coating was characterized by FT-IR, XRD and GDOES. The conversion coating was found to consist mainly of Zn{sub 2}Al(OH){sub 6}(CO{sub 3}){sub 0.5}·xH{sub 2}O crystals (an LDH). The thickness of the conversion coating layer increased with increasing pH up to pH 12.4, but above this pH, its thickness tended to decrease due to the formation of ZnO. The reason for the dependence of corrosion resistance on solution pH is discussed from the viewpoints of the thickness and changes in the microstructure of the conversion coating layer, including its crystal size, density and uniformity, which could vary during the initial formation of ZnO at pH values above 12.6.

36 MATERIALS SCIENCE↗

Fatigue Behavior and Mechanisms of High-Entropy Alloys

Fatigue failures of structural materials pose enormous risks to in-service structures, as well as human lives. The development of advanced durable structural materials with fatigue resistance has important social impact. The novel concept of high-entropy alloys (HEAs) has engendered considerable attention due to their exhibited unusual mechanical properties, and correspondingly opening a new road to design fatigue-resistant structural materials. Here, the present work discusses and reviews the current findings on fatigue behavior and mechanisms of HEAs. Based on the understanding of fatigue-resistant favorable deformation mechanisms in HEAs, the perspectives from the viewpoint of materials design are provided to advance the development of fatigue-resistant HEAs, and future works are also suggested.

36 MATERIALS SCIENCE↗

Structure and α-decay properties of the heaviest nuclei

The α-decay is considered from the viewpoint of the many body features of internal nuclear motion and the theory of resonance reactions, as well. The α-half-lives are derived from clustering and scattering amplitudes given by self-consistent nuclear models for the nuclear shell structure and reaction dynamics. Calculations are performed for superheavy nuclei with Z=102–120 using the measured E{sub α} values, microscopic (shell model) or macroscopic (one body) cluster formation amplitudes and resonance scattering amplitudes. Theoretical results for α-half-lives are compared to data and empirical estimates. We prove that the Brown systematics (logT{sub α} (s) vs. Z{sub d}{sup 0.6}Q{sub α}{sup −1/2}, where Q{sub α} (MeV) is the effective decay energy, and Z{sub d} is the charge number of the daughter nucleus) of current decay data is very useful in the analysis and interpretation of data and prediction of new results. It is shown that by adding even–odd corrections to the calculated α-half-lives, the agreement with experimental data is improved and basic trends in the systematics of data are well reproduced. Spectroscopic information is derived from the ratio of theoretical to experimental results. The accuracy of available experimental half-lives is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗