Search NASA⌕ Search

SEARCH · Search NASA

Results for “WARP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Lorentz forces on the dust in Jupiter's ring

The paths of dust particles in the Jovian ring are investigated using a numerical integration program, including the acceleration due to gravity and the Lorentz and drag accelerations arising from the motions of the charged dust through the Jovian plasma. It is determined that the orbit of a 2.5 micron radius spherical dust particle with a density of 2 g/cu cm -10V will become significantly perturbed. The ring will tend to warp northwards near 130-160 deg longitude, with the maximum excursion of the Jupiter ring grains equalling about 0.1 deg (consistent with a distance of 220 km above the equatorial plane). It is found that either the particles are larger or the voltages on them less than what has been determined by previous investigators, while the plasma near the ring may be considerably cooler than was estimated. Calculations show that particles of 0.3 micron with -10 V potentials are spread from 1.68-1.98 of the radius of Jupiter and inclined up to 7 deg out of the equatorial plane. The paths of these particles do not follow Keplerian orbits, and the particle positions are not symmetric about the equatorial plane. Particles of 0.4 micron radius have less asymmetric orbits than 0.3 micron particles, while particles less than 0.2 micron are perturbed into Jupiter cloudtops within a few tens of hours.

Consolmagno, G. J.↗

Comparison of heliospheric current sheet structure obtained from potential magnetic field computations and from observed polarization coronal brightness

A comparison is conducted of the structure of the heliospheric current sheet early in sunspot cycle 21 as computed from the observed photospheric magnetic field with a potential field approximation and as inferred from synoptic maps of the observed coronal polarization brightness. On most of the solar rotations compared, the two methods give essentially the same results; the basic shape of the warped current sheet and the amplitude (in solar latitude) of the displacements of the sheet from the solar equator are similar. On one rotation the current sheet computed with the potential field approximation appears to be distorted by a large photospheric region of unbalanced magnetic flux.

Wilcox, J. M.↗

Optical features associated with the extended HI envelope of M83

Deep red Schmidt plates (127-04 + RG630) of the galaxy M83 show the presence of extensive faint optical structure well beyond the Holmberg radius of the galaxy. Digital processing has been used to bring these features out in detail. They consist of arc-like structures and clumps of H II regions, which seem to follow the H I distribution and thus are likely to participate in the warping of the H I disk.

Wamsteker, W.↗

The effect of the solar field reversal on the modulation of galactic cosmic rays

There is now a growing awareness that solar cycle related changes in the large-scale structure of the interplanetary magnetic field (IMF) may play an important role in the modulation of galactic cosmic rays. To date, attention focussed on two aspects of the magnetic field structure: large scale compression regions produced by fast solar wind streams and solar flares, both of which are known to vary in intensity and number over the solar cycle, and the variable warp of the heliospheric current sheet. It is suggested that another feature of the solar cycle is worthy of consideration: the field reversal itself. If the Sun reverses its polarity by simply overturning the heliospheric current sheet (northern fields migrating southward and vice-versa) then there may well be an effect on cosmic ray intensity. However, such a simple picture of solar reversal seems improbable. Observations of the solar corona suggest the existence of not one but several current sheets in the heliosphere at solar maximum. The results of a simple calculation to demonstrate that the variation in cosmic ray intensities that will result can be as large as is actually observed over the solar cycle are given.

Thomas, B. T.↗

Vibration and flutter of mistuned bladed-disk assemblies

An analytical model for investigating vibration and flutter of mistuned bladed disk assemblies is presented. This model accounts for elastic, inertial and aerodynamic coupling between bending and torsional motions of each individual blade, elastic and inertial couplings between the blades and the disk, and aerodynamic coupling among the blades. The disk was modeled as a circular plate with constant thickness and each blade was represented by a twisted, slender, straight, nonuniform, elastic beam with a symmetric cross section. The elastic axis, inertia axis, and the tension axis were taken to be noncoincident and the structural warping of the section was explicitly considered. The blade aerodynamic loading in the subsonic and supersonic flow regimes was obtained from two-dimensional unsteady, cascade theories. All the possible standing wave modes of the disk and traveling wave modes of the blades were included. The equations of motion were derived by using the energy method in conjunction with the assumed mode shapes for the disk and the blades. Continuities of displacement and slope at the blade-disk junction were maintained. The equations were solved to investigate the effects of blade-disk coupling and blade frequency mistuning on vibration and flutter. Results showed that the flexibility of practical disks such as those used for current generation turbofans did not have a significant influence on either the tuned or mistuned flutter characteristics. However, the disk flexibility may have a strong influence on some of the system frequencies and on forced response.

Kaza, K. R. V.↗

The structure of the heliospheric current sheet - 1978-1982

Continuing the study near solar minimum in 1976-1977 (Hoeksema et al., 1982), the configuration of the heliospheric magnetic field for the period 1976-1982 is calculated using a potential field model. Particular attention is given to the structure during the rising phase, maximum, and early decline of sunspot cycle 21, from 1978 to 1982. Four warps in the current sheet (the boundary between interplanetary magnetic field toward and away from the sun) are seen early in this interval; these give rise to a four-sector structure in the interplanetary magnetic field observed at earth. It is noted that the location of the current sheet changes slowly and extends to a heliographic latitude of approximately 50 deg. The strength of the polar field correction throughout this period is determined and included in the model calculations. The lower latitude magnetic fields become much stronger as the polar fields weaken and reverse polarity near maximum, decreasing the effect of the polar field correction.

Hoeksema, J. T.↗

Thickness of Saturn's rings inferred from Voyager 1 observations of microwave scatter

Earth-based telescopic observations indicate that Saturn's rings are about 1 kilometer thick, while spacecraft measurements and theoretical considerations give an upper bound of about 100 meters. Analysis of a shielding effect present in radio occultation provides a sensitive new measure of the ring thickness. On the basis of this effect, Voyager 1 microwave measurements of near-forward scatter imply a thickness ranging from less than 10 meters in ring C to about 20 and 50 meters in the Cassini division and ring A, respectively. Monolayer models do not fit the observations in the latter two regions. The discrepancy between the earth-based and spacecraft measurements may be due to warps in the ring plane or effects of tenuous material outside the primary ring system.

Zebker, H. A.↗

Ccds: Their Cause and Cure

Charge coupled devices (CCDs) have opened new horizons in the optical astronomy. Most of the presently existing astronomical CCD systems are oriented and designed primarily for work on faint objects. The use of CCDs for high precision work on bright objects remains to be explored. Issues and problems specific to (CCDs) are covered in detail. The important structural characteristics of CCDs are that they are integrating, self scanned, photon counting (one selection for each detected photon), solid state devices. The typical physical sizes are of the order of 1 - 3 cm, and typical raster formats of 500x500 pixels (TI), 320x512 (RCA), 385x576 (GEC), 800x800 (TI), and 1500x1500 (GEC) should be available soon. Typical (and optimal) operating temperatures are around -100 C, with liquid N2 as the most common coolant. Some CCDs are physically warped. This causes focus variations across the surface, which amount to a spatially variable PSF. Other relevant properties of CCDs as detectors and a comparison with some other astronomical detectors are given.

Djorgovski, S.↗

Extension of constrained incremental Newton-Raphson scheme to generalized loading fields

This paper develops numerical strategies which enable the constrained incremental Newton-Raphson scheme to handle the static response of structure to loading fields with completely generalized histories. This is made possible through the use of specially warped hyperelliptic constraint surfaces which control successive or clustered load steps in the vicinity of loading events with specific timing schedules. Such an approach enables improved convergence and stability characteristics. Due to the generality of the methodology, pre- and postbuckling behavior caused by both kinematic and material nonlinearity can be handled. To demonstrate the scheme, the results of several bench-mark problems are also presented. These include situations involving nonlinear kinematics as well as highly history-dependent elastic-plastic and thermoelastic-plastic material behavior.

Padovan, J.↗

Vibration and flutter of mistuned bladed-disk assemblies

An analytical model for investigating vibration and flutter of mistuned bladed disk assemblies is presented. This model accounts for elastic, inertial and aerodynamic coupling between bending and torsional motions of each individual blade, elastic and inertial couplings between the blades and the disk, and aerodynamic coupling among the blades. The disk was modeled as a circular plate with constant thickness and each blade was represented by a twisted, slender, straight, nonuniform, elastic beam with a symmetric cross section. The elastic axis, inertia axis, and the tension axis were taken to be noncoincident and the structural warping of the section was explicitly considered. The blade aerodynamic loading in the subsonic and supersonic flow regimes was obtained from two-dimensional unsteady, cascade theories. All the possible standing wave modes of the disk and traveling wave modes of the blades were included. The equations of motion were derived by using the energy method in conjunction with the assumed mode shapes for the disk and the blades. Continuities of displacement and slope at the blade-disk junction were maintained. The equations were solved to investigate the effects of blade-disk coupling and blade frequency mistuning on vibration and flutter. Results showed that the flexibility of practical disks such as those used for current generation turbufans did not have a significant influence on either the tuned or mistuned flutter characteristics. However, the disk flexibility may have a strong influence on some of the system frequencies and on forced response.

Rao, K.↗

Comparative analysis of on-orbit dynamic performance of several large antenna concepts

A comparative analysis of the on-orbit dynamic performance of four large anetanna concepts is presented. Among the antenna concepts evaluated are: the box truss; tetrahedral truss; warp-radial rib; and the hoop and column antenna designs. The characteristics and magnitudes of the antennas' dynamic response were evaluated in terms of structural displacements and member loads incurred during various slew-rate maneuvers. The results of the dynamic response analysis are compared to the design requirements of the Land Mobile Satellite System (LMSS) with respect to surface accuracy, decenter, defocus, and angular rocking. Comments are made on the effectiveness of structural damping and the application of active controls for vibrational response reduction. Schematic illustrations of the antenna design concepts are provided.

Andersen, G. C.↗

Cosmic-ray picture of the heliosphere

The existing data base on the characteristics of the heliosphere is discussed. It is known that solar gravity is less than necessary to hold all the solar material, and therefore a supersonic solar wind exists. Skylab soft X-ray photographs revealed the existence of coronal holes, which evolve in an 11 yr cycle. It has been proposed that all but the highest energy cosmic rays detected on earth can be attributed to solar and heliospheric origins, a controversial view which requires further empirical and theoretical work on particle acceleration processes and regions of interaction of the solar wind with interplanetary plasma. It is possible that a warped solar current sheet stretches to interplanetary space and organizes the solar magnetic field and thereby guides cosmic rays. An inverse correlation has been identified between the sunspot cycle and cosmic ray intensity. The features and effects of solar flares, subsequent shock waves and high speed particle streams are also discussed.

Venkatesan, D.↗

Experimental study of disturbances produced in a pre-transitional laminar boundary layer by weak freestream turbulence

The high-amplitude, low-frequency, disturbances generated in a Blasius boundary layer by grid-produced freestream turbulence were studied by means of hot-wire anemometry and by flow visualization. Emphasis was placed on determining the cause and nature of these, and on their effect upon the mean flow profile. It was found that the motion in the layer was intrinsically three-dimensional, according to which the fronts, of Tollmien-Schlichting waves became warped. Evidence of streamwise vorticity was noted. At Reynolds numbers near 1.6 million, the maximum attained, sharp velocity gradients appeared locally. With increase of grid size, there appeared turbulent spots which were wider than the coherence scale of the background motion.

Kendall, J. M.↗

Generic Structural Elements

This research concentrated on improving beam theories as applicable to composite structures. Confirmation is sought for analytical predictions using a new beam theory based on the assumption that cross-sections of the beam are infinitely rigid in their own plane, but free to warp out-of-plane, of these analytical predictions were sought during the current reporting.

Source record↗

Fracture morphology of 2-D carbon-carbon composition

Out-of-plane tensile tests of a woven fabric carbon-carbon composite were performed in a scanning electron microscope equipped with a tensile stage and a videotape recording system. The composite was prepared from T-300 8-harness satin graphite fabric and a phenolic resin. The (0/90/0/90/0 sub 1/2) sub 2 laminate, with a Theta describing the orientation of the warp fibers of the fabric, was cured at 160 C and pyrolized at 871 C. This was followed by four cycles of resin impregnation, curing, and pyrolysis. A micrograph of the cross section of the composite is presented. Inspection of the specimen fracture surface revealed that the filaments had no residual matrix bonded to them. Further inspection revealed that the fracture was interlaminar in nature. Failure occurred where filaments of adjacent plies had the same orientation. Thus it is postulated that improvement in transverse tensile strength of 2-D carbon-carbon depends on the improvement of the filament-matrix bond strength.

Avery, W. B.↗

Holographic interferometry - Errors caused by thermal gradients in holographic plates

Thermal effects as sources of errors in holographic interferometry are illustrated on an example of reflection holography patterns obtained on graphite-epoxy specimens exposed before and after compressive loading. The numerical interpretation of the obtained holograms indicated some peculiar unexpected thickness changes in the specimen. In addition, some patterns showed random occurrence of zones of low and zero contrast. These discrepancies occurred usually in the first of the two exposures and were traced to thermal warping and thermal relaxation patterns caused by small temperature gradients that resulted from heat transfer to the photographic plates during their installation. Suggested precautions to minimize thermal effects include using thick holographic plates (photographic plates attached to glass plates) and insulated gloves during handling and allowing time to establish thermal equilibrium before the exposure.

Post, D.↗

Accelerated plasma flows at the near-tail magnetopause

ISEE-1 and -2 fast plasma data of ion and electron distributions at 16 energies and 16 velocities are used to study accelerated particle flow events at the near-tail dusk magnetopause. The flows separated the plasma sheet from the magnetosheath, a situation which normally arises when the local magnetosheath and plasma sheet magnetic fields are close to being antiparallel. The flows were directed tailward at speeds up to twice those in the adjoining magnetosheath and had densities similar to those in the magnetosheath. The attendant ion and electron temperatures were between those in the magnetosheath and in the plasma sheet. The flow region closest to the magnetosheath had the highest velocity and the lowest density, and a lowered-density field line region appeared on the earthward side of the accelerated flow region. The flows had the velocity changes of a tangential stress balance and are taken as the location of field line merging near (and perhaps tailward) of the dawn-dusk terminator. Significantly fewer accelerated flows are seen in the dawn tail magnetopause, an asymmetry attributed to a seasonally dependent warping of the midtail neutral sheet or a superimposition of interplanetary magnetic field lines over the dusk magnetopause.

Gosling, J. T.↗

A wide latitude CO survey of molecular clouds in the III galactic quadrant

Molecular clouds in the third galactic quadrant from 180-280 galactic longitude were surveyed in the 115.271 GHz line of CO at an angular resolution of 0.5 deg. In galactic latitude the survey covers from b = -5 to +5 deg, with a few extensions to higher latitudes. A preliminary analysis of the data allowed the determination of distances and masses of at least 30 molecular clouds related to the Perseus arm and to the Cygnus, or outer, arm. The studied clouds are located between 2.5 kpc and 10.7 kpc from the sun with most of the masses between 30,000-700,000 solar masses, and only three up to two million solar masses. The most interesting result comes from the distribution of the clouds distance from the galactic plane that indicates a warp in the arms to which these clouds belong.

May, J.↗