Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Chelation-directed interface engineering of in-place self-cleaning membranes

Water–energy sustainability will depend upon the rapid development of advanced pressure-driven separation membranes. Although energy-efficient, water-treatment membranes are constrained by ubiquitous fouling, which may be alleviated by engineering self-cleaning membrane interfaces. In this study, a metal-polyphenol network was designed to direct the armorization of catalytic nanofilms (ca. 18 nm) on inert polymeric membranes. The chelation-directed mineralized coating exhibits high polarity, superhydrophilicity, and ultralow adhesion to crude oil, enabling cyclable crude oil-in-water emulsion separation. The in-place flux recovery rate exceeded 99.9%, alleviating the need for traditional ex situ cleaning. The chelation-directed nanoarmored membrane exhibited 48-fold and 6.8-fold figures of merit for in-place self-cleaning regeneration compared to the control membrane and simple hydraulic cleaning, respectively. Precursor interaction mechanisms were identified by density functional theory calculations. Here, chelation-directed armorization offers promise for sustainable applications in catalysis, biomedicine, environmental remediation, and beyond.

42 ENGINEERING↗
DOE OSTI2025

2,3-Butanediol recovery from fermentation broth using membrane pertraction

2,3-Butanediol (BDO) has gained immense interest for use as a platform chemical in the production of many important chemicals such as synthetic rubber, plasticizer, and octane boosters. Using BDO as a precursor for sustainable aviation fuel production may significantly reduce the carbon footprint of the airline industry. However, recovery of BDO is challenging due to its relatively low concentration (∼10 wt %) in fermentation broth and its high affinity for water. In this work, we developed a membrane pertraction process for BDO recovery from biomass derived fermentation broth. Different organic solvents such as hexanol and oleyl alcohol were investigated. With traditional solvent extraction, hexanol required a solvent to feed ratio of 10 to recover >90 % BDO, and oleyl alcohol could recover 35 % of BDO at the same ratio. BDO recovery of >90 % was demonstrated with pertraction; a BDO extraction rate of 15 g 1 m −2 h −1 was achieved using hexanol, and an extraction rate of 10 g 1 m −2 h −1 was achieved using oleyl alcohol. Impurities commonly found in fermentation broth did not affect the separation performance of the pertraction process. In conclusion, this work demonstrates pertraction as a low-footprint, scalable method for recovery of high-purity BDO from fermentation broth.

2,3 butanediol↗
DOE OSTI2020

Fouling modeling and prediction approach for heat exchangers using deep learning

In this article, we develop a generalized and scalable statistical model for accurate prediction of fouling resistance using commonly measured parameters of industrial heat exchangers. This prediction model is based on deep learning where a scalable algorithmic architecture learns non-linear functional relationships between a set of target and predictor variables from large number of training samples. Here, the efficacy of this modeling approach is demonstrated for predicting fouling in an analytically modeled cross-flow heat exchanger, designed for waste heat recovery from flue-gas using room temperature water. The performance results of the trained models demonstrate that the mean absolute prediction errors are under 10 –4 KW –1 for flue-gas side, water side and overall fouling resistances. The coefficients of determination (R 2 ), which characterize the goodness of fit between the predictions and observed data, are over 99%. Even under varying levels of measurement noise in the inputs, we demonstrate that predictions over an ensemble of multiple neural networks achieves better accuracy and robustness to noise. We find that the proposed deep-learning fouling prediction framework learns to follow heat exchanger flow and heat transfer physics, which we confirm using locally interpretable model agnostic explanations around randomly selected operating points. Overall, we provide a robust algorithmic framework for fouling prediction that can be generalized and scaled to various types of industrial heat exchangers.

42 ENGINEERING↗
DOE OSTI2023

Wettability Alteration with Weak Acid-Assisted Surfactant Flood

Oil-wetness and heterogeneity are two key reasons for low oil recovery by waterflooding in carbonate reservoirs. Surfactants have been effective in altering the oil-wet matrix to a more water-wet condition and initiating spontaneous imbibition. Because it takes time for the surfactant to alter wettability, oil recovery from the tight matrix is slow and sometimes not economically feasible. Acids have the potential of dissolving minerals, which may alter wettability. In this study, the enhanced oil recovery (EOR) performance of an acid-assisted surfactant solution, a novel technique, was evaluated for low-temperature applications. A set of acids and their acetates were tested. Bulk rock-acid reaction, wettability alteration (WA) tests, and spontaneous imbibition measurements were conducted at reservoir temperature (35°C) to identify effective candidates. Coreflood tests were then performed to evaluate the selected acid-surfactant formulations. Before and after a coreflood test, the core was scanned using micro-computed tomography (CT) to investigate pore structure alteration. Bulk reaction measurements showed that weak acids, especially acetic acid (AA), have the desired low reaction rates at 35°C. WA tests showed that AA can remove the crude oil off the rock surface and alter wettability through mineral dissolution. The surfactant can reduce contact angles from 160° to 58°; adding acid into the surfactant can further reduce it to 52°. Spontaneous imbibition experiments showed the synergy between the acid and the surfactant; the AA-surfactant solution had the highest oil recovery (62.6%) among acid-surfactant formulations. The acid improves the WA efficiency by the surfactant through surface mineral dissolution and lower ζ-potential. The imbibition transports the acid-surfactant solutions into the matrix, which minimizes face dissolution. Coreflood tests show that the AA-surfactant flood can increase the oil recovery rate and recover about 8% more oil compared to the surfactant flood. Micro-CT showed that a few mineral particles were transported along the core and partially plugged pore throats, which reduced permeability and diverted flow leading to improved oil recovery. Here, the transport of the acid in reservoirs and the potential plugging issues have to be carefully evaluated in future studies.

58 GEOSCIENCES↗
DOE OSTI2020

Conceptual and Mathematical Foundation for the FE/NETL CO 2 Prophet Model for Simulating CO 2 Enhanced Oil Recovery, Version 2

The United States (U.S.) Department of Energy (DOE) Office of Fossil Energy (FE) at the National Energy Technology Laboratory (NETL) has developed the FE/NETL CO 2 Prophet Model, which is Version 2 of CO 2 Prophet. This document describes the mathematical foundation for the FE/NETL CO 2 Prophet Model. CO 2 Prophet was originally developed in the 1990s by Texaco Exploration and Production and Technology Department for DOE. The FE/NETL CO 2 Prophet Model is an oil reservoir simulator that is suitable for simulating water floods and supercritical carbon dioxide (CO 2 ) enhanced oil recovery (EOR). The FE/NETL CO 2 Prophet Model uses a number of assumptions to simplify the equations describing the flow of oil, water (or brine), and CO 2 in the oil reservoir.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Lessons Learned: Summary of Insights From the HERO WEC and Waves to Water Deployments Between 2022 and 2024

In 2020, a team from the National Renewable Energy Laboratory (NREL) partnered with the East Carolina University Coastal Studies Institute to develop a small, modular, wave-powered point absorber desalination prototype. That prototype, known as the hydraulic and electric reverse osmosis wave energy converter (HERO WEC), was intended to de-risk the installation activities planned for the Waves to Water Prize sponsored by the Water Power Technologies Office. The NREL team was given approximately 18 months to design, build, bench test, and deploy the HERO WEC prototype. Since the initial HERO WEC development, it has been used for two in-lab test programs and three ocean deployments. The first in-lab test program focused on ensuring that the overall operation of the device occurred as expected and on validating the operation of safety systems such as pressure relief valves or electrical breakers for load mitigation. The second in-lab test program was the first time the NREL team leveraged NREL’s large-amplitude motion platform to characterize the performance of the HERO WEC. Of the three in-water deployments, the first deployment was effectively an installation and recovery practice with no meaningful wave activity during the time that it was installed. The second deployment was a 2-week effort that enabled both the electric and hydraulic configurations of the device to be in the water for approximately 5 days each. This deployment was also the first time that the team had the opportunity to perform a drivetrain swap on the Coastal Studies Institute research vessel. The third deployment had to be split into two separate installations due to minor damage incurred from the WEC spinning during the initial installation. This report summarizes the deployments, the challenges encountered with each deployment, and the lessons learned for future work.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Advances in Carbon Capture and Use (CCU) Technologies: A Comprehensive Review and CO2 Mitigation Potential Analysis

One of society’s major current challenges is carbon dioxide emissions and their consequences. In this context, new technologies for carbon dioxide (CO2) capture have attracted much attention. One of these is carbon capture and utilization (CCU). This work focuses on the latest trends in a holistic approach to carbon dioxide capture and utilization. Absorption, adsorption, membranes, and chemical looping are considered for CO2 capture. Each CO2 capture technology is described, and its benefits and drawbacks are discussed. For the use of carbon dioxide, various possible applications of CCU are described, starting with the utilization of carbon dioxide in agriculture and proceeding to the conversion of CO2 into fuels (catalytic processes), chemicals (photocatalytic processes), polymers, and building supplies. For decades, carbon dioxide has been used in industrial processes, such as CO2-enhanced oil recovery, the food industry, organic compound production (such as urea), water treatment, and, therefore, the production of flame retardants and coolants. There also are several new CO2-utilization technologies at various stages of development and exploitation, such as electrochemical conversion to fuels, CO2-enhanced oil recovery, and supercritical CO2. At the end of this review, future opportunities are discussed regarding machine learning (ML) and life cycle assessment (LCA).

Peres, Christiano B.↗
DOE OSTI2021

Modeling Contact Angle vs. Temperature for the Quartz-Water-Decane System

Innovative approaches are needed to improve the efficiency of oil recovery technologies to meet the growing demands of fossil-fuel based energy consumption. Enhanced oil recovery (EOR) methods such as low-salinity waterflooding and chemically tuned waterflooding aim to optimize the reservoir’s wetting properties, detaching oil globules from rock surfaces and allowing easier oil flow through pore throats. This wetting behavior is commonly quantified by contact angle measurements of the rock-oil-brine interface, which have been thoroughly investigated and theorized for many systems at ambient temperatures and pressures. However, few studies exist for extending contact angle theories away from ambient conditions. In this paper, we model the contact angles of a quartz-water-decane system at elevated temperatures using the surface tension component (STC) approach. Temperature-dependent van der Waals [Lifshitz-van der Waals (LW)] interactions and hydrogen-bonding (acid-base) interactions were calculated and are incorporated into the model for the quartz-water-decane interface. Additionally, the Hough and White procedure was used to create temperature-dependent dielectric functions of quartz, water, and normal decane for calculations of Hamaker coefficients. Hamaker coefficients calculated this way are highly linear with temperature and agree well with Israelachvili’s approximation. The acid-base interactions likely contribute the most to system wettability changes. Resulting contact angles of the quartz-water-decane system shift from water-wet (16°) to slightly water-wet (57.4°) as temperature increases. The model was also successfully verified for the quartz-air-water system. Our results can be used in future studies to determine optimal injected water compositions for specific rock-oil-brine and other systems with consideration of reservoir temperature.

02 PETROLEUM↗
DOE OSTI2026

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗
DOE OSTI2026

Cobalt-Doped Tungsten Oxide Nanoparticles for Electrochemical Sensing and Detection of a Penicillin Antibiotic: Amoxicillin

A sensitive electrochemical sensor for the determination of antibacterial amoxicillin (AMXL) in pharmaceutical dosage and environmental samples was developed, since its residues were found in water, food, and biological samples to pose adverse health risks such as immune–allergic reactions and antimicrobial resistance. WO 3 -based sensors are reported to provide higher sensitivity, selectivity, and stability during the electrochemical reaction. Considering this, Co-doped WO 3 nanostructures were synthesized by the hydrothermal method yielding a mixture of nanoparticle and nanorod structures and applied to the assay of AMXL. Extensive characterizations were carried out by SEM, XRD, TEM, and XPS analysis that confirm the monoclinic crystal structure with a uniform Co distribution in the WO 3 lattice. The optimum doping amount of Co in the lattice is found to be 1.80 at %. The electrochemical performance of the Co-WO 3 /carbon paste electrode (CPE) was evaluated for the determination of AMXL under optimum conditions using cyclic voltammetry, electrochemical impedance spectroscopy, and square wave voltammetry. The Co-WO 3 /CPE showed two linear detection ranges at 0.01–0.1 μM with the linear regression I pa = 3.73 [AMXL] + 0.77 with R 2 = 0.96 and at 0.1 to 30.0 μM with the linear regression I pa = 3.76 [AMXL] + 0.69 with R 2 = 0.95. The limit of detection was 9.1 nM (SNR = 3), and the limit of quantification was 30.6 nM (SNR = 10). The sensitivities for lower and higher concentration ranges were 63.22 and 63.73 μA μM –1 cm –2 , respectively. Furthermore, Co-WO 3 /CPE showed high selectivity and anti-interference capabilities. In conclusion, the sensing and disposable Co-WO 3 /CPE sensor showed a great potential for AMXL analysis in spiked soil, water, and Amoxil tablet samples with desirable percentage recovery.

Shanbhag, Mahesh M. [KLE Technological University,↗
DOE OSTI2025

High Efficiency and Transient Air Systems for Affordable Load-Following Heavy Duty Truck Fuel Cells

Hydrogen fuel cell powered vehicles are one of the potential paths to reducing vehicle emissions. An important subsystem of the hydrogen fuel cell system is an air handling system that provides the needed oxygen (in air) to react with hydrogen in the fuel cell stack for electric power generation. Today’s systems use an electric motor to power an air compressor that supplies oxygen to the fuel cell stack. This process requires significant electrical power and is the largest parasitic power loss in hydrogen fuel cell vehicles. In addition to parasitic power loss, hydrogen fuel cell systems often have reliability issues associated with the air handling system. Reliability is of significant concern for heavy duty applications (especially long-haul applications). This project aims to improve both the electrical power consumption and reliability of hydrogen fuel cell air handling systems to meet the needs of heavy duty on-highway vehicle applications.

08 HYDROGEN↗
DOE OSTI2024

Pennsylvania Department of Environmental Protection (PA DEP) 26r Detailed Produced Water Compositions (version 1.0)

A database of geochemical compositions of aqueous species in produced water reported to the PA DEP. Samples were collected between mid-2012 to early-2020. Data from publicly-available PA DEP 26r reports were scraped from pdf files and cumulated into tabular spreadsheet format for >1000 produced water streams from Marcellus wells in Pennsylvania. In addition to providing the original values, the NETL NEWTS team has reformatted the dataset to allow sample streams to be easily copied into OLI Studio and Geochemist WorkBench (GWB) software for modeling the geochemistry and the recovery of critical minerals, such as lithium, from these produced water streams. In addition, a version of the dataset has been included with predictions for some missing values in the original dataset using machine learning techniques within CoDaRT software, a public ML software developed by the Nation Energy Technology Laboratory. We have made the Input into CoDaRT and one example output from CoDaRT available in this dataset.

Aqueous Chemistry↗
DOE OSTI2025

Pennsylvania Department of Environmental Protection (PA DEP) 26r Detailed Produced Water Compositions (version 2.0)

A database of geochemical compositions of aqueous species in produced water reported to the PA Department of Environmental Protection (PA DEP). Samples were collected between late-2010 to late-2024. Data from publicly available PA DEP 26r reports were scraped from pdf files and cumulated into tabular spreadsheet format for >3,000 produced water streams from Marcellus Shale wells in Pennsylvania. In addition to providing the original values, the NETL NEWTS team has reformatted the dataset to allow sample streams to be easily copied into OLI Studio and Geochemist WorkBench (GWB) software for modeling the geochemistry and the recovery of critical minerals, such as lithium, from these produced water streams. ***This dataset is an updated version of the PA DEP 26r Detailed Produced Water Compositions (version 1.0) dataset, providing expanded spatial and temporal coverage.***

Aqueous Chemistry↗
DOE OSTI2026

Innovations Driven by Advanced Characterization to Strategize Critical Mineral Production and Beneficial Reuse from Fossil Energy Waste

Critical minerals (CM), such as rare earth elements (REE), cobalt, nickel, and lithium, have important uses in modern electronics and advanced manufacturing, yet are vulnerable to potential supply chain disruptions. Relatively abundant and readily available fossil energy (FE) wastes, such as coal combustion ash, acid mine drainage (AMD) and treatment solids (AMD solids), and Oil and Gas (O&G) drilling wastes (drill cuttings and produced waters) are under consideration as CM feedstocks. The National Energy Technology Laboratory (NETL) has studied CM resources for various FE wastes as part of the U.S. Department of Energy’s mission of bolstering the domestic CM supply, and makes the data available to the public on EDX at sites such as the NEWTS group. Advanced characterization utilizing synchrotron x-ray techniques coupled with laboratory extractions has been performed to identify CM hosting phases in these FE wastes to inform CM recoverability mechanisms. Novel methods to selectively recover CMs while co-producing other valuable byproducts have been developed. Successful examples discussed here include: (1) The identification of REE/Co/Ni/Sc binding and hosting phases in select FE waste (coal combustion ash and AMD solids), resulting in the development of a patented CM step-extraction process, (2) coupled production of functional sorbents from these extraction wastes and for CM recovery. A pilot-scale testing to evaluate the patent’s technical feasibility for extracting REE from coal ash on a barrel scale has been successfully performed. Additionally, (3) evaluation and measurements of brine geochemistry from U.S. O&G produced waters has informed a high Li recovery potential from Marcellus Shale produced water. NETL researchers have been developing tailored pre-treatment processes, an innovative and highly durable lithium sorbent, and geochemical model guided precipitation to accelerate Li production from the Marcellus Shale produced waters. These innovations driven by characterization are integral for maximizing and advancing the potential for CM recovery while offsetting the cost and environmental footprint for FE waste management.

critical mineral processing↗
DOE OSTI2020

DECOVALEX-2019 (Task C Final Report)

The DECOVALEX Project is an on-going international research collaboration, established in 1992, to advance the understanding and modeling of coupled Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) processes in geological in geological systems. This document is the final report of Task C which was proposed and coordinated by the Japan Atomic Energy Agency (JAEA), presenting the technical definitions of the problems studied, approaches applied, achievements made and outstanding issues for future research. DECOVALEX-2019 Task C aims to develop modelling and prediction methods using numerical simulation based on the water-filling experiment to examine the post-driftclosure environment recovery processes. Three research teams, JAEA, Sandia National Laboratories in the United States (SNL), and the Technical University of Liberec in the Czech Republic (TUL) were challenged to simulate the observed environmental changes. The Task consisted of following three main steps. The simulation targets were the water pressure drawdown/recovery and the variation of water chemistry during the tunnel excavation and closure, as observed in the monitoring boreholes and the CTD.

58 GEOSCIENCES↗
DOE OSTI2026

Data Center High-Temperature Liquid Cooling and Heat Reuse Techno-Economic Study: Preprint

Data centers are energy-intensive facilities with growing demands for efficiency and cost-effective operations. Smaller, more distributed edge inference data centers are expected to proliferate as AI applications require low latency closer to the user of AI tools, which presents a growing opportunity to explore the systems implications of liquid cooling on water and energy use. This study analyzes the implementation of high-temperature liquid cooling systems in a prototypical inference 1-MW data center and explores the potential for heat reuse across varying climates with a goal to optimize energy efficiency, reduce capital and operational costs, and identify opportunities for high-performance cooling and water use reduction infrastructure. This analysis evaluated configurations utilizing a peak day hourly sizing and systems performance spreadsheet to evaluate design and operational conditions from which component sizes, installed cost, operational cost, and performance metrics were determined for the Base case and the Elevated case. The techno-economic analysis included heat reuse applications across a range of heat recovery temperatures and heat rejection options. The analysis shows that high-temperature liquid cooling allows for improved energy efficiency, lower water consumption, and lower capital costs compared to traditional cooling approaches. Transitioning to elevated water inlet/outlet temperatures (50 degrees C/60 degrees C) eliminates the need for chillers, cooling towers, and heat recovery equipment in many scenarios across three distinct climate zones. This results in up to 75% capital cost savings for the cooling and heat recovery equipment, and with significantly reduced water consumption, especially in non-heat reuse applications. Heat generated from data centers can also be repurposed for space heating, domestic hot water, and other applications, and is most cost-effective when data center outlet temperatures exceed 55-60 degrees C.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Using taxa-based approaches to delineate stream macroinvertebrate assemblage responses to stressor gradients in modified alluvial agroecosystems

Alluvial plain landscapes are some of the most agriculturally productive lands in the world but often have modified stream ecosystems due to cultivation history. This context requires consideration when establishing water quality management goals. We analyzed state water quality databases to demonstrate that Mississippi Alluvial Plain (MAP) ecoregion streams have elevated specific conductivity (SC) and nutrients and lower macroinvertebrate local and regional taxa pools compared to streams in other ecoregions, potentially reducing the efficacy of traditional biomonitoring approaches within the region. To overcome these challenges, we used threshold indicator taxa analysis (TITAN) to compare macroinvertebrate assemblage responses to water quality gradients among ecoregions in Mississippi. We identified individual taxa and assemblage-level responses to increasing water quality degradation in MAP streams. Observed responses occurred at higher concentrations for SC, total organic carbon (TOC) and total phosphorus (TP), but not total nitrogen (TN) relative to other ecoregions. These responses appeared to be driven by a large proportion of indicator taxa considered tolerant or unresponsive in other ecoregions, responding negatively to increasing water quality stressors in MAP streams. Our observed assemblage-level stressor responses to WQ gradients in MAP streams demonstrate shifting tolerance in highly altered ecosystems may require adjustments to recovery expectations but also provide useful measures for monitoring improvements in regional water quality. For example, our observed macroinvertebrate assemblage response to increasing TP identified a management goal similar to guidance based on distributional analysis of water quality data within the MAP ecoregion (0.11 vs 0.128 mg L –1 ) and thus provide some biological basis for previously identified nutrient goals for the region. Our approach can guide and monitor success of nutrient reduction efforts in MAP watersheds and other alluvial plain agroecosystems where reference conditions do not exist, and local and regional taxa pools are less diverse and may not support full recovery of ecological assemblages. While our results are promising, they should also be compared with more sensitive and less habitat-limited biological assemblages (e.g., algae or bacteria) to better understand complex ecological responses to best management practices designed to increase sustainability of high production agricultural regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Creation of Multiple Effect Evaporator and Combined Cycle Modelica Modules, and Optimization of Potable Water Generation from Saltwater Sources (Final Technical Report)

Modelica models for a Heat Recovery Steam Generator (HRSG) and Multiple Effect Evaporator have been developed. These models have been validated against results from literature and from an actual cogeneration system on the campus of NC State University. The models are capable of connecting to other components to create multi-input, multi-output energy systems with storage, also known as integrated energy systems. An existing 35 MW gas turbine model is connected to the HRSG model created for this project to produce 9 bar steam. The high pressure steam feeds a backpressure steam turbine from the library to generate additional electric power. 2 bar steam leaves the turbine to supply an 8 effect MEE to generate water for a community. As part of the effort, three research papers were submitted (two published in ANS Proceedings and one submitted to Applied Energy).

20 FOSSIL-FUELED POWER PLANTS↗