Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerosol retrieval”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Comparison of Aerosol Single Scattering Albedos Derived by Diverse Techniques In Two North Atlantic Experiments

Aerosol single scattering albedo omega (the ratio of scattering to extinction) is important in determining aerosol climatic effects, in explaining relationships between calculated and measured radiative fluxes, and in retrieving aerosol optical depths from satellite radiances. Recently, two experiments in the North Atlantic region, the Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX) and the Second Aerosol Characterization Experiment (ACE-2), determined aerosol omega by a variety of techniques. The techniques included fitting of calculated to measured radiative fluxes; retrievals of omega from skylight radiances; best fits of complex refractive index to profiles of backscatter extinction, and size distribution; and in situ measurements of scattering and absorption at the surface and aloft. Both TARFOX and ACE-2 found a fairly wide range of values for omega at midvisable wavelengths approx. 550 nm, with omega(sub midvis) greater than or equal to 0.85 and less than or equal to 0.99 for the marine aerosol impacted by continental pollution. Frequency distributions of omega could usually be approximated by lognormals in omega(sub max) - omega, with some occurrence of bimodality, suggesting the influence of different aerosol sources or processing. In both TARFOX and ACE-2, closure tests between measured and calculated radiative fluxes yielded best-fit values of omega(sub midvis) 0.90 +/- 0.04 for the polluted boundary layer. Although these results have the virtue of describing the column aerosol unperturbed by sampling, they are subject to questions about representativeness and other uncertainties (e.g., thermal offsets, unknown gas absorption) The other techniques gave larger values for omega(sub midvis) for the polluted boundary layer, with a typical result of omega(sub midvis) = 0.95 +/- 0.04. Current uncertainties in omega are large in terms of climate effects More tests are needed of the consistency among different methods and of humidification effects on omega.

Russell, P. B.↗
NASA NTRS2021

Detecting Layer Height of Smoke and Dust Aerosols Over Vegetated Land and Water Surfaces Via Oxygen Absorption Bands

We present an algorithm for retrieving aerosol layer height (ALH) and aerosol optical depth (AOD) for smoke and dust over vegetated land and water surfaces from measurements of the Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR). Our algorithm uses EPIC atmospheric window bands to determine AOD and then takes advantage of oxygen A and B bands to derive ALH. We applied this algorithm on several dust and smoke events. Validation shows our results are of high accuracy.

Jing Zeng↗
NASA NTRSDate not supplied

Use of Aerosol Observations From Aircraft in Satellite Remote Sensing and Modelling Comparisons

Aerosol extensive and intensive properties vary throughout the world and remain one of the largest uncertainties in determining future climate both because of difficulties in their measurement and their modelled behaviors. Here we highlight the contributions of airborne sampling by the sunphotometer 4STAR (Spectrometers for Sky-Scanning Sun Tracking Atmospheric Research) from two different parts of the world; Korean peninsula and region during the KORUS-AQ experiment (KORean-US Air Quality in May-June 2016) and over the South East Atlantic during ORACLES (ObseRvations of CLouds above Aerosols and their intEractionS in August-September-October 2016, 2017, and 2018) field campaign. The high temporal and spatial resolution, afforded by airborne sampling during KORUS-AQ, are used to determine the variability of aerosol intensive and extensive properties, which is a metric than can be compared in between multiple different observations and models, even over varying surfaces and spanning multiple different aerosol emission sources. We show the consistency over spatial scales of the AOD (Aerosol Optical Depth), and the aerosol intensive properties (Angstrom exponent - AE, fine mode fraction - FMF) observed by 4STAR, GOCI (Geostationary Ocean Color Imager Yonsei aerosol retrieval v2), MERRA-2 reanalysis (Modern-Era Retrospective Analysis for Research and Applications, v2), and from airborne in situ aerosol optical measurements by LARGE (NASA Langley Aerosol Research Group Experiment). The majority of AODs due to fine mode aerosol is observed at altitudes lower than 2 km and is dependent on the prevailing meteorological conditions. AE and FMF are found to be more spatially variable than AOD during all of KORUS-AQ, even when accounting for potential sampling biases. This may indicate that microphysical processes like aerosol particle formation, growth, and coagulation impact the dominant aerosol size at shorter scales than their combined effect on the aerosol optical depth by the aerosol emission, transport, and removal. Averaging between measurements and model, the distance at which the correlation to itself is reduced by 15% is 65 km for AOD, and 22.7 km for AE. Vertically resolved measurement from an aircraft enable the direct measurements of aerosols overlying clouds. When aerosol overlie bright clouds, their radiative impact on the incident light can be either positive or negative. This difference in radiative impact promotes difficulties in remote sensing aerosol properties, which have shown biases in AOD retrievals when clouds are underneath. The AOD above clouds measured by 4STAR during ORACLES are used to build and improve upon the current Near-Real-Time MODACAERO algorithm for above cloud AOD from MODIS, into a continuity product for NASA EOS/SNPP/JPSS.

Aerosol↗
NASA NTRS2011

Global Distributions of Mineral Dust Properties from SeaWiFS and MODIS: From Sources to Sinks

The impact of natural and anthropogenic sources of mineral dust has gained increasing attention from scientific communities in recent years. Indeed, these airborne dust particles, once lifted over the source regions, can be transported out of the boundary layer into the free troposphere and can travel thousands of kilometers across the oceans resulting in important biogeochemical impacts on the ecosystem. Due to the relatively short lifetime (a few hours to about a week), the distributions of these mineral dust particles vary extensively in both space and time. Consequently, satellite observations are needed over both source and sink regions for continuous temporal and spatial sampling of aerosol properties. With the launch of SeaWiFS in 1997, Terra/MODIS in 1999, and Aqua/MODIS in 2002, high quality comprehensive aerosol climatology is becoming feasible for the first time. As a result of these unprecedented satellite data records, studies of the radiative and biogeochemical effects due to dust aerosols are now possible. In this study, we will show the comparisons of satellite retrieved aerosol optical thickness using Deep Blue algorithm with data from AERONET sunphotometers over desert and semi-desert regions as well as vegetated areas. Our results indicate reasonable agreements between these two. These new satellite products will allow scientists to determine quantitatively the aerosol properties near sources using high spatial resolution measurements from Sea WiFS and MODIS-like instruments. The multiyear satellite measurements since 1997 from Sea WiFS will be compared with those retrieved from MODIS and MISR, and will be utilized to investigate the interannual variability of source, pathway, and dust loading associated with the dust outbreaks over the entire globe. Finally, the trends observed over the last decade based upon the SeaWiFS time series in the amounts of tropospheric aerosols due to natural and anthropogenic sources (such as changes in the frequency of dust storms) will be discussed.

Hsu, N. Christina↗
NASA NTRSDate not supplied

The PACE-MAPP Algorithm: Coupled Ocean/Aerosol Products

The PACE-MAPP algorithm, under development for combined SPEXone, HARP2 and OCI observations from NASA’s future Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) satellite mission, directly inverts the coupled atmosphere-ocean system to retrieve aerosol optical and microphysical properties and ocean optical properties simultaneously. PACE-MAPP thus retrieves the spectrally-resolved inherent optical properties of the Earth’s waters: the spectral particulate scattering coefficient, b_p (λ), the spectral absorption coefficient for particulates and color-dissolved matter, a_tot (λ), and the spectral particulate backscatter efficiency, b ̃_"bp". From these three spectrally-resolved components, we can derive the spectral particulate hemispherical backscattering coefficient b_bp (λ) and the spectral diffuse attenuation coefficient K_"d" (λ). Direct comparisons of b_"bp" (532) and K_"d" (532) are made to collocated High-Spectral Resolution Lidar (HSRL) in-water measurements. The PACE-MAPP algorithm was tested using PACE-analog datasets collected by Research Scanning Polarimeter (RSP) observations during the NASA NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) and SABOR (Ship-Aircraft Bio-Optical Research) airborne campaigns, both of which also include ship-based in situ measurements.

Snorre Alfred Moen Stamnes↗
NASA NTRS1992

Aerosol optical depth retrievals over the Konza Prairie

The aerosol optical depth over the Konza Prairie, near Manhattan, Kansas, was recorded at various locations by five separate teams. These measurements were made in support of the First ISLSCP Field Experiment (FIFE) and used to correct imagery from a variety of satellite and aircraft sensors for the effects of atmospheric scattering and absorption. The results from one instrument are reported here for 26 days in 1987 and for 7 in 1989. Daily averages span a range of 0.05 to 0.28 in the midvisible wavelengths. In addition, diurnal variations are noted in which the afternoon optical depths are greater than those of the morning by as much as 0.07. A comparison between instruments and processing techniques used to determine these aerosol optical depths is provided. The first comparisons are made using summer 1987 data. Differences of as much as 0.05 (midvisible) are observed. Although these data allow reasonable surface reflectance retrievals, they do not agree to within the performance limits typically associated with these types of instruments. With an accuracy goal of 0.02 a preseason calibration/comparison experiment was conducted at a mountain site prior to the final field campaign in 1989. Good calibration data were obtained, and good agreement (0.01, midvisible) was observed in the retrieved optical depth acquired over the Konza. By comparing data from the surface instruments at different locations, spatial inhomogeneities are determined. Then, data from the airborne tracking sunphotometer allow one to determine variations as a function of altitude. Finally, a technique is proposed for using the in situ data to establish an instrument calibration.

Bruegge, Carol J.↗
NASA NTRS2004

3D Cloud Radiative Effects on Aerosol Optical Thickness Retrievals in Cumulus Cloud Fields in the Biomass Burning Region in Brazil

Aerosol amount in clear regions of a cloudy atmosphere is a critical parameter in studying the interaction between aerosols and clouds. Since the global cloud cover is about 50%, cloudy scenes are often encountered in any satellite images. Aerosols are more or less transparent, while clouds are extremely reflective in the visible spectrum of solar radiation. The radiative transfer in clear-cloudy condition is highly three- dimensional (3D). This paper focuses on estimating the 3D effects on aerosol optical thickness retrievals using Monte Carlo simulations. An ASTER image of cumulus cloud fields in the biomass burning region in Brazil is simulated in this study. The MODIS products (i-e., cloud optical thickness, particle effective radius, cloud top pressure, surface reflectance, etc.) are used to construct the cloud property and surface reflectance fields. To estimate the cloud 3-D effects, we assume a plane-parallel stratification of aerosol properties in the 60 km x 60 km ASTER image. The simulated solar radiation at the top of the atmosphere is compared with plane-parallel calculations. Furthermore, the 3D cloud radiative effects on aerosol optical thickness retrieval are estimated.

Wen, Guo-Yong↗
NASA NTRS2012

Discrimination of Biomass Burning Smoke and Clouds in MAIAC Algorithm

The multi-angle implementation of atmospheric correction (MAIAC) algorithm makes aerosol retrievals from MODIS data at 1 km resolution providing information about the fine scale aerosol variability. This information is required in different applications such as urban air quality analysis, aerosol source identification etc. The quality of high resolution aerosol data is directly linked to the quality of cloud mask, in particular detection of small (sub-pixel) and low clouds. This work continues research in this direction, describing a technique to detect small clouds and introducing the smoke test to discriminate the biomass burning smoke from the clouds. The smoke test relies on a relative increase of aerosol absorption at MODIS wavelength 0.412 micrometers as compared to 0.47-0.67 micrometers due to multiple scattering and enhanced absorption by organic carbon released during combustion. This general principle has been successfully used in the OMI detection of absorbing aerosols based on UV measurements. This paper provides the algorithm detail and illustrates its performance on two examples of wildfires in US Pacific North-West and in Georgia/Florida of 2007.

Lyapustin, A.↗
NASA NTRS2002

Evaluation of SAGE II and Balloon-Borne Stratospheric Aerosol Measurements: Evaluation of Aerosol Measurements from SAGE II, HALOE, and Balloonborne Optical Particle Counters

Stratospheric aerosol measurements from the University of Wyoming balloonborne optical particle counters (OPCs), the Stratospheric Aerosol and Gas Experiment (SAGE) II, and the Halogen Occultation Experiment (HALOE) were compared in the period 1982-2000, when measurements were available. The OPCs measure aerosol size distributions, and HALOE multiwavelength (2.45-5.26 micrometers) extinction measurements can be used to retrieve aerosol size distributions. Aerosol extinctions at the SAGE II wavelengths (0.386-1.02 micrometers) were computed from these size distributions and compared to SAGE II measurements. In addition, surface areas derived from all three experiments were compared. While the overall impression from these results is encouraging, the agreement can change with latitude, altitude, time, and parameter. In the broadest sense, these comparisons fall into two categories: high aerosol loading (volcanic periods) and low aerosol loading (background periods and altitudes above 25 km). When the aerosol amount was low, SAGE II and HALOE extinctions were higher than the OPC estimates, while the SAGE II surface areas were lower than HALOE and the OPCS. Under high loading conditions all three instruments mutually agree to within 50%.

Hervig, Mark↗
NASA NTRS2004

PARAGON: A Systematic, Integrated Approach to Aerosol Observation and Modeling

Aerosols are generated and transformed by myriad processes operating across many spatial and temporal scales. Evaluation of climate models and their sensitivity to changes, such as in greenhouse gas abundances, requires quantifying natural and anthropogenic aerosol forcings and accounting for other critical factors, such as cloud feedbacks. High accuracy is required to provide sufficient sensitivity to perturbations, separate anthropogenic from natural influences, and develop confidence in inputs used to support policy decisions. Although many relevant data sources exist, the aerosol research community does not currently have the means to combine these diverse inputs into an integrated data set for maximum scientific benefit. Bridging observational gaps, adapting to evolving measurements, and establishing rigorous protocols for evaluating models are necessary, while simultaneously maintaining consistent, well understood accuracies. The Progressive Aerosol Retrieval and Assimilation Global Observing Network (PARAGON) concept represents a systematic, integrated approach to global aerosol Characterization, bringing together modern measurement and modeling techniques, geospatial statistics methodologies, and high-performance information technologies to provide the machinery necessary for achieving a comprehensive understanding of how aerosol physical, chemical, and radiative processes impact the Earth system. We outline a framework for integrating and interpreting observations and models and establishing an accurate, consistent and cohesive long-term data record.

PARAGON↗
NASA NTRS1991

Preliminary assessment of possible aerosol contamination effects on SAGE ozone trends in the lower stratosphere

An investigation of the validity of long-term ozone trends in the lower stratosphere derived from SAGE I and II measurements is described. At altitudes below approximately 20 km, it is important to separate the ozone and aerosol contributions to SAGE extinction at 600 nm. The correlation between SAGE II measurements of ozone and aerosols indicates that most of the variability in these parameters is associated with physically induced variations resulting from quasi-horizontal motions of air parcels. The SAGE ozone measurements are however found to be as much as 20 percent larger than coincident ozonesonde measurements between 15 and 20 km altitude. A sudden change in the difference at approximately 14.5 km altitude for which there is a change in the SAGE aerosol retrieval procedure suggests that SAGE ozone trends below 20 km altitude may be more sensitive to aerosol variations. Between 20 and 25 km altitude, however, both SAGE and the ozonesondes indicate a reduction in ozone of approximately 0.5 percent/year over the period 1979 to 1989 at midlatitudes of the Northern Hemisphere.

Cunnold, Derek M.↗
NASA NTRS2002

A Comparison of Model- and Satellite-Derived Aerosol Optical Depth and Reflectivity

The determination of an accurate quantitative understanding of the role of tropospheric aerosols in the earth's radiation budget is extremely important because forcing by anthropogenic aerosols presently represents one of the most uncertain aspects of climate models. Here the authors present a systematic comparison of three different analyses of satellite-retrieved aerosol optical depth based on the Advanced Very High Resolution Radiometer (AVHRR)- measured radiances with optical depths derived from six different models. Also compared are the model-derived clear-sky reflected shortwave radiation with satellite-measured reflectivities derived from the Earth Radiation Budget Experiment (ERBE) satellite. The three different satellite-derived optical depths differ by between -0.10 and 0.07 optical depth units in comparison to the average of the three analyses depending on latitude and month, but the general features of the retrievals are similar. The models differ by between -0.09 and +0.16 optical depth units from the average of the models. Differences between the average of the models and the average of the satellite analyses range over -0.11 to +0.05 optical depth units. These differences are significant since the annual average clear-sky radiative forcing associated with the difference between the average of the models and the average of the satellite analyses ranges between -3.9 and 0.7 W m(exp -2) depending on latitude and is -1.7 W m (exp -2) on a global average annual basis. Variations in the source strengths of dimethylsulfide (DMS)-derived aerosols and sea salt aerosols can explain differences between the models, and between the models and satellite retrievals of up to 0.2 optical depth units. The comparison of model-generated reflected shortwave radiation and ERBE-measured shortwave radiation is similar in character as a function of latitude to the analysis of modeled and satellite-retrieved optical depths, but the differences between the modeled clear-sky reflected flux and the ERBE clear-sky reflected flux is generally larger than that inferred from the difference between the models and the AVHRR optical depths, especially at high latitudes. The difference between the mean of the models and the ERBE-analyzed clear-sky flux is 1.6 W m(exp -2). The overall comparison indicates that the model-generated aerosol optical depth is systematically lower than that inferred from measurements between the latitudes of 10 and 30 deg S. It is not likely that the shortfall is due to small values of the sea salt optical depth because increases in this component would create modeled optical depths that are larger than those from satellites in the region north of 30 deg N and near 50 deg S. Instead, the source strengths for DMS and biomass aerosols in the models may be too low. Firm conclusions, however, will require better retrieval procedures for the satellites, including better cloud screening procedures, further improvement of the model's treatment of aerosol transport and removal, and a better determination of aerosol source strengths.

Penner, Joyce E.↗
NASA NTRS2012

Steps Toward an EOS-Era Aerosol Air Mass Type Climatology

We still have a way to go to develop a global climatology of aerosol type from the EOS-era satellite data record that currently spans more than 12 years of observations. We have demonstrated the ability to retrieve aerosol type regionally, providing a classification based on the combined constraints on particle size, shape, and single-scattering albedo (SSA) from the MISR instrument. Under good but not necessarily ideal conditions, the MISR data can distinguish three-to-five size bins, two-to-four bins in SSA, and spherical vs. non-spherical particles. However, retrieval sensitivity varies enormously with scene conditions. So, for example, there is less information about aerosol type when the mid-visible aerosol optical depth (AOD) is less that about 0.15 or 0.2.

Kahn, Ralph A.↗
NASA NTRS2010

What We are Learning from (and About) the 10 Plus Year MISR Aerosol Data Record

Having a 10+ year data record from the Multi-angle Imaging SpectroRadiometer (MISR) significantly improves our opportunities to validate the retrieved aerosol optical depth (AOD) and especially particle microphysical property products. It also begins to raise the possibility of using the data to look for changes or even trends, at least on a regional basis. Further, we have had the opportunity to expand the database of wildfire smoke plume heights derived from the multiangle observations. This presentation will review the latest aerosol validation results and algorithm upgrades under consideration by the MISR team, and will summarize the current status of MISR global aerosol air mass type, and regional dust transport and smoke injection height products. The strengths and limitations of these data for constraining aerosol transport model simulations will receive special emphasis.

Kahn, Ralph A.↗
NASA NTRS2012

Comparison of Aerosol Classification From Airborne High Spectral Resolution Lidar and the CALIPSO Vertical Feature Mask

Knowledge of aerosol composition and vertical distribution is crucial for assessing the impact of aerosols on climate. In addition, aerosol classification is a key input to CALIOP aerosol retrievals, since CALIOP requires an inference of the lidar ratio in order to estimate the effects of aerosol extinction and backscattering. In contrast, the NASA airborne HSRL-1 directly measures both aerosol extinction and backscatter, and therefore the lidar ratio (extinction-to-backscatter ratio). Four aerosol intensive properties from HSRL-1 are combined to infer aerosol type. Aerosol classification results from HSRL-1 are used here to validate the CALIOP aerosol type inferences.

Burton, Sharon P.↗
NASA NTRS2012

Aerosol Remote Sensing

This book gives a much needed explanation of the basic physical principles of radia5tive transfer and remote sensing, and presents all the instruments and retrieval algorithms in a homogenous manner. For the first time, an easy path from theory to practical algorithms is available in one easily accessible volume, making the connection between theoretical radiative transfer and individual practical solutions to retrieve aerosol information from remote sensing. In addition, the specifics and intercomparison of all current and historical methods are explained and clarified.

Lenoble, Jacqueline↗
NASA NTRS2017

An Example of Aerosol Pattern Variability Over Bright Surface Using High Resolution MODIS MAIAC: The Eastern and Western Areas of the Dead Sea and Environs

The extreme rate of evaporation of the Dead Sea (DS) has serious implications for the surrounding area, including atmospheric conditions. This study analyzes the aerosol properties over the western and eastern parts of the DS during the year 2013, using MAIAC (Multi-Angle Implementation of Atmospheric Correction) for MODIS, which retrieves aerosol optical depth (AOD) data at a resolution of 1km. The main goal of the study is to evaluate MAIAC over the study area and determine, for the first time, theprevailing aerosol spatial patterns. First, the MAIAC-derived AOD data was compared with data from three nearby AERONET sites (Nes Ziona - an urban site, and Sede Boker and Masada - two arid sites), and with the conventional Dark Target (DT) and Deep Blue (DB) retrievals for the same days and locations, on a monthly basis throughout 2013. For the urban site, the correlation coefficient (r) for DTDB products showed better performance than MAIAC (r = 0.80, 0.75, and 0.64 respectively) year-round. However, in the arid zones, MAIAC showed better correspondence to AERONET sites than the conventional retrievals (r = 0.58 - 0.60 and 0.48 - 0.50 respectively). We investigated the difference in AOD levels, and its variability, between the Dead Sea coasts on a seasonal basis and calculated monthlyseasonal AOD averages for presenting AOD patterns over arid zones. Thus, we demonstrated that aerosol concentrations show a strong preference for the western coast, particularly during the summer season. This preference, is most likely a result of local anthropogenic emissions combined with the typical seasonal synoptic conditions, the Mediterranean Sea breeze, and the region complex topography. Our results also indicate that a large industrial zone showed higher AOD levels compared to an adjacent reference-site, i.e., 13 percent during the winter season.

AOD↗