Search NASA⌕ Search

SEARCH · Search NASA

Results for “agreement dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Investigation to advance prediction techniques of the low-speed aerodynamics of V/STOL aircraft

A computer program, VSAERO, has been applied to a number of V/STOL configurations with a view to advancing prediction techniques for the low-speed aerodynamic characteristics. The program couples a low-order panel method with surface streamline calculation and integral boundary layer procedures. The panel method--which uses piecewise constant source and doublet panels-includes an iterative procedure for wake shape and models boundary layer displacement effect using the source transpiration technique. Certain improvements to a basic vortex tube jet model were installed in the code prior to evaluation. Very promising results were obtained for surface pressures near a jet issuing at 90 deg from a flat plate. A solid core model was used in the initial part of the jet with a simple entrainment model. Preliminary representation of the downstream separation zone significantly improve the correlation. The program accurately predicted the pressure distribution inside the inlet on the Grumman 698-411 design at a range of flight conditions. Furthermore, coupled viscous/potential flow calculations gave very close correlation with experimentally determined operational boundaries dictated by the onset of separation inside the inlet. Experimentally observed degradation of these operational boundaries between nacelle-alone tests and tests on the full configuration were also indicated by the calculation. Application of the program to the General Dynamics STOL fighter design were equally encouraging. Very close agreement was observed between experiment and calculation for the effects of power on pressure distribution, lift and lift curve slope.

Maskew, B.↗
NASA NTRS1989

Unsteady Navier-Stokes computations over airfoils using both fixed and dynamic meshes

A finite volume implicit approximate factorization method which solves the thin layer Navier-Stokes equations was used to predict unsteady turbulent flow airfoil behavior. At a constant angle of attack of 16 deg, the NACA 0012 airfoil exhibits an unsteady periodic flow field with the lift coefficient oscillating between 0.89 and 1.60. The Strouhal number is 0.028. Results are similar at 18 deg, with a Strouhal number of 0.033. A leading edge vortex is shed periodically near maximum lift. Dynamic mesh solutions for unstalled airfoil flows show general agreement with experimental pressure coefficients. However, moment coefficients and the maximum lift value are underpredicted. The deep stall case shows some agreement with experiment for increasing angle of attack, but is only qualitatively comparable past stall and for decreasing angle of attack.

Rumsey, Christopher L.↗
NASA NTRS1989

Geosat crossover analysis in the tropical Pacific. II - Verification analysis of altimetric sea level maps with expendable bathythermograph and island sea level data

Altimetric sea level time series for the tropical Pacific have been generated from the Geosat crossover differences during the classified era of the Geosat mission from April 1985 to September 1986. These are compared with the expendable bathythermograph (XBT)-derived dynamic height and island sea level observations, yielding good agreement. A complex empirical orthogonal function analysis is also applied to the altimetric and XBT results. The analysis demonstrates the dominance of the annual signal in this relatively short time series and the westward propagation of major features away from the equator.

Tai, Chang-Kou↗
NASA NTRS1993

A study of the earth's free core nutation using international deployment of accelerometers gravity data

In this study we consider the influence of the earth's free core nutation (FCN) on diurnal tidal admittance estimates for 11 stations of the globally distributed International Deployment of Accelerometers network. The FCN causes a resonant enhancement of the diurnal admittances which can be used to estimate some properties of the FCN. Estimations of the parameters describing the FCN (period, Q, and resonance strength) are made using data from individual stations and many stations simultaneously. These yield a result for the period of 423-452 sidereal days, which is shorter than theory predicts but is in agreement with many previous studies and suggests that the dynamical ellipticity of the core may be greater than its hydrostatic value.

Cummins, Phil R.↗
NASA NTRS2016

The Carnegie Hubble Program: The Distance and Structure of the SMC as Revealed by Mid-Infrared Observations of Cepheids

Using Spitzer observations of classical Cepheids we have measured the true average distance modulus of the Small Magellanic Cloud (SMC) to be18.96 +/- 0.01 stat +/- 0.03sys mag (corresponding to 62+/- 0.3kpc), which is 0.48 +/- 0.01 mag more distant than the LMC. This is in agreement with previous results from Cepheid observations, as well as with measurements from other indicators such as RR Lyrae stars and the tip of the red giant branch. Utilizing the properties of the mid-infrared Leavitt Law we measured precise distances to individual Cepheids in the SMC, and have confirmed that the galaxy is tilted and elongated such that its eastern side is up to20 kpc closer than its western side. This is in agreement with the results from red clump stars and dynamical simulations of the Magellanic Clouds and Stream.

Scowcroft, Victoria↗
NASA NTRS2019

The Effects of High-Temperature Fractional Crystallization on Calcium Isotopic Composition

We report Ca isotope fractionation among a co-genetic suite of samples from the Mauritanian Guelb el Azib ultramafic-mafic-anorthosite complex (GAC), which represents the fractional crystallization sequence of an igneous magma chamber. We investigate how the composition of an evolving crystallizing liquid and the resultant mineralogy of co-crystallizing assemblages affects inter-phase Ca isotope fractionation. Because the GAC is an Archean metamorphosed complex, we first investigate the resistance of the Ca isotope signature to secondary hydrothermal alteration and to metamorphism. While we cannot conclude here that Ca isotopes are undisturbed at the mineral scale, we show that they are preserved at the bulk rock scale. This is adequate for our study where several samples are almost monomineralic at the bulk scale level. The δ(exp 44/40)Ca (relative to NIST standard SRM 915a) of GAC layers range from −1.53 to 1.61‰, with the earliest-formed ultramafic cumulate layer being isotopically heaviest and the later, more felsic layers being isotopically lighter. For the first time, we show that plagioclase is much more enriched in light Ca isotopes compared to olivine and (Ca-) pyroxene. Monte Carlo simulations suggest that Ca isotopes are fractionated among co-existing silicate minerals during fractional crystallization, possibly in relation with the residual liquid composition. In qualitative agreement with computational models based on first principles lattice dynamics, we observe that Ca isotope fractionation is mineralogically controlled and importantly, that the degree of fractionation can vary according to the CaO composition of the residual liquid. While previous studies have aimed to understand partial melting as a source of Ca isotope fractionation, our results suggest that fractional crystallization is also a source of Ca isotope variability among co-genetic samples.

Maria C. Valdes↗
NASA NTRS2004

CFD Approaches for Simulation of Wing-Body Stage Separation

A collection of computational fluid dynamics tools and techniques are being developed and tested for application to stage separation and abort simulation for next-generation launch vehicles. In this work, an overset grid Navier-Stokes flow solver has been enhanced and demonstrated on a matrix of proximity cases and on a dynamic separation simulation of a belly-to-belly wing-body configuration. Steady cases show excellent agreement between Navier-Stokes results, Cartesian grid Euler solutions, and wind tunnel data at Mach 3. Good agreement has been obtained between Navier-Stokes, Euler, and wind tunnel results at Mach 6. An analysis of a dynamic separation at Mach 3 demonstrates that unsteady aerodynamic effects are not important for this scenario. Results provide an illustration of the relative applicability of Euler and Navier-Stokes methods to these types of problems.

Buning, Pieter G.↗
NASA NTRS2002

Investigation of Dynamic and Physical Processes in the Upper Troposphere and Lower Stratosphere

Research under this Cooperative Agreement has been funded by several NASA Earth Science programs: the Atmospheric Effects of Radiation Program (AEAP), the Upper Atmospheric Research Program (UARP), and most recently the Atmospheric Chemistry and Modeling Assessment Program (ACMAP). The purpose of the AEAP was to understand the impact of the present and future fleets of conventional jet traffic on the upper troposphere and lower stratosphere, while complementary airborne observations under UARP seek to understand the complex interactions of dynamical and chemical processes that affect the ozone layer. The ACMAP is a more general program of modeling and data analysis in the general area of atmospheric chemistry and dynamics, and the Radiation Sciences program.

Selkirk, Henry B.↗
DOE OSTI2024

Simulations of classical three-body thermalization in one dimension

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of pointlike particles, typically the dominant process for reaching thermal equilibrium in higher-dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential V ij ∝ 1/|x i –x j | n or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature T toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low-density limit. For the inverse power-law potential, the rate of thermalization is proportional to ρ 2 ⁢T$\frac{1}{2}$ – $\frac{1}{n}$, where ρ is the number density. Furthermore, the corresponding proportionality constant decreases with increasing n.

1-dimensional systems↗
NASA NTRS1991

Update on results of SPRE testing at NASA Lewis

The Space Power Research Engine (SPRE), a free-piston Stirling engine with a linear alternator, is being tested at NASA Lewis Research Center as part of the Civilian Space Technology Initiative (CSTI) as a candidate for high capacity space power. Results are presented from recent SPRE tests designed to investigated the effects of variation in the displacer seal clearance and piston centering port area on engine performance and dynamics. The impact of these variations on PV power and efficiency are presented. Comparisons of the displacer seal clearance tests results with HFAST code predictions show good agreement for PV power, but show poor agreement for PV efficiency. Correlations are presented relating the piston midstroke position to the dynamic Delta P across the piston and the centering port area. Test results indicate that a modest improvement in PV power and efficiency may be realized with a reduction in piston centering port area.

Cairelli, James E.↗
NASA NTRS1959

The Static and Dynamic Rotary Stability Derivatives at Subsonic Speeds of an Airplane Model Having Wing and Tail Surfaces Swept Back 45 degrees

Wind-tunnel measurements were made of the static and dynamic rotary stability derivatives of an airplane model having sweptback wing and tail surfaces. The Mach number range of the tests was from 0.23 to 0.94. The components of the model were tested in various combinations so that the separate contribution to the stability derivatives of the component parts and the interference effects could be determined. Estimates of the dynamic rotary derivatives based on some of the simpler existing procedures which utilize static force data were found to be in reasonable agreement with the experimental results at low angles of attack. The results of the static and dynamic measurements were used to compute the short-period oscillatory characteristics of an airplane geometrically similar to the test model. The results of these calculations are compared with military flying qualities requirements.

Lopez, Armando E.↗
DOE OSTI2021

Deep glassy state dynamic data challenge glass models: Elastic models

The idea of an “ideal” glass transition temperature has persisted at least since the work from Kauzmann when it was observed that the entropy of glass-forming liquids extrapolated to below that of the crystal, thus suggesting the need for a phase transition at a finite or non-zero absolute temperature. This thermodynamic paradox was also found to be related to the observations of a diverging of the extrapolated viscosity or relaxation times at a temperature near to this ideal glass transition. Recently, however, we have carried out experiments using both an ancient amber material and an ultra-stable amorphous fluoropolymer that challenge the ideas of the divergence of the viscosity or relaxation times at this ideal glass transition. In the present manuscript we have evaluated two theories of the glass transition that are based on ideas related to elasticity of the amorphous glass-forming material. We find that the models from both J. Dyre and his group and of K.S. Schweizer and his group not only show non-diverging behavior but are also in some agreement with the new data, though still showing somewhat slower dynamics than those observed in the experiments. The work shows that the data are good enough to distinguish between theories and it is suggested that other mechanisms may be needed to fully describe the non-diverging responses of the ultra-stable glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhancement of Unsteady and 3D Aerodynamics Models using Machine Learning

Unsteady aerodynamics will be an important part of the floating wind turbines of the future operating under high shear across the rotor disk coupled with platform motion and atmospheric turbulence. We develop an unsteady aerodynamics and dynamic stall model using a long short-term memory variant of recurrent neural networks. The neural network model is trained using the oscillating airfoil data set from Ohio State University. The predictions from our machine learning (ML)-based model show good agreement with the experimental data and other state-of-the-art dynamic stall models for a wide range of airfoils, Reynolds numbers and reduced frequencies. In some cases the predictions are better than the Beddoes-Leishman model implementation in OpenFAST, when using the default coefficients. The ML-based model is also able to capture the key physics associated with dynamic stall, such as the precedence of moment stall before lift stall and cycle-to-cycle variations in the aerodynamic response. The new unsteady aerodynamics model is expected to improve prediction of fatigue loads for yaw-based wake-steering control scenarios in actuator-line and actuator-disc simulations of wind farms. Our methodology for training the ML-model provides a pathway for improving design level tools using high-fidelity computational fluid dynamics (CFD) simulations in the future.

17 WIND ENERGY↗
NASA NTRS1987

A computer program for model verification of dynamic systems

Dynamic model verification is the process whereby an analytical model of a dynamic system is compared with experimental data, and then qualified for future use in predicting system response in a different dynamic environment. There are various ways to conduct model verification. The approach adopted in MOVER II employs Bayesian statistical parameter estimation. Unlike curve fitting whose objective is to minimize the difference between some analytical function and a given quantity of test data (or curve), Bayesian estimation attempts also to minimize the difference between the parameter values of that function (the model) and their initial estimates, in a least squares sense. The objectives of dynamic model verification, therefore, are to produce a model which: (1) is in agreement with test data, (2) will assist in the interpretation of test data, (3) can be used to help verify a design, (4) will reliably predict performance, and (5) in the case of space structures, facilitate dynamic control.

Chrostowski, J. D.↗
DOE OSTI2024

Anisotropic interactions for continuum modeling of protein–membrane systems

In this work, a model for anisotropic interactions between proteins and cellular membranes is proposed for large-scale continuum simulations. The framework of the model is based on dynamic density functional theory, which provides a formalism to describe the lipid densities within the membrane as continuum fields while still maintaining the fidelity of the underlying molecular interactions. Within this framework, we extend recent results to include the anisotropic effects of protein–lipid interactions. As applications, we consider two membrane proteins of biological interest: a RAS–RAF complex tethered to the membrane and a membrane embedded G protein-coupled receptor. A strong qualitative and quantitative agreement is found between the numerical results and the corresponding molecular dynamics simulations. Combining the scope of continuum level simulations with the details from molecular level particle simulations enables research into protein–membrane behaviors at a more biologically relevant scale, which crucially can also be accessed via experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Effects of breaking gravity waves on the chemical composition of the mesosphere and lower thermosphere

Eddy diffusion and momentum forcing in the mesosphere and lower thermosphere arise principally from the effects of breaking gravity and waves. The propagation and dissipation of gravity waves depend strongly on season and latitude because of its relationship to the background zonal wind. These processes have significant effects on the transport of chemical species in that region, so that observations of variations in chemical constituents provide useful tracers for dynamical theory. A parameterization of gravity wave propagation and dissipation was incorporated in the coupled dynamical-chemical model to study these effects. Several easily observable airglow features of the mesosphere-thermosphere region are shown to provide sensitive indications of gravity wave influence. In particular, theoretical predictions of large seasonal and latitudinal variations in the atomic oxygen green line, the Meinal bands of excited OH, and the O3 densities inferred from O2 (delta supra 1 sub g) emission at altitudes from 75 to 90 km are shown to be in remarkably good agreement with observations. Implications of these sensitive chemical tracers for the dynamics of the mesosphere-lower thermosphere region and its relationship to gravity waves are discussed.

Solomon, S.↗
NASA NTRS1976

Maximum likelihood estimates of lift and drag characteristics obtained from dynamic aircraft maneuvers

A maximum likelihood estimation method for obtaining lift and drag characteristics from dynamic flight maneuvers was investigated. This paper describes the method and compares the estimates of lift and drag obtained by using the method with estimates obtained from wind-tunnel tests and from established methods for obtaining estimates from flight data. In general, the lift and drag coefficients extracted from dynamic flight maneuvers by the maximum likelihood estimation technique are in good agreement with the estimates obtained from the wind-tunnel tests and the other methods. When maneuvers that met the requirements of both flight methods were analyzed, the results of each method were nearly the same. The maximum likelihood estimation technique showed promise in terms of estimating lift and drag characteristics from dynamic flight maneuvers. Further studies should be made to assess the best mathematical model and the most desirable type of dynamic maneuver to get the highest quality results from this technique.

Iliff, K. W.↗
NASA NTRS1978

Bubbly flow model for the dynamic characteristics of cavitating pumps

The recent experimental transfer matrices obtained by Ng and Brennen (1978) for some axial flow pumps revealed some dynamic characteristics which were unaccounted for by any existing theoretical analysis; their visual observations suggested that the bubbly cavitating flow in the blade passages could be responsible for these effects. A theoretical model of the dynamic response of this bubbly blade-passage flow is described in the present paper. Void-fraction fluctuations in this flow result not only from pressure fluctuations but also because the fluctuating angle of attack causes fluctuations in the rate of production of bubbles near the leading edge. The latter causes kinematic waves which interact through the boundary conditions with the dynamic waves caused by pressure fluctuation. The resulting theoretical transfer functions which results are in good qualitative agreement with the experiments; with appropriate choices of two parameters good quantitative agreement is also obtained. The theoretical model also provides one possible explanation of the observation that the pump changes from an essentially passive dynamic element in the absence of cavitation to a progressively more active element as the extent of cavitation increases.

Brennen, C.↗