Search NASA⌕ Search

SEARCH · Search NASA

Results for “avoidance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Investigating Detect-and-Avoid Surveillance Performance for Unmanned Aircraft Systems

Most unmanned aircraft systems will be required to be equipped with a Detect-and-Avoid (DAA) system with a surveillance component. The surveillance performance requirements of the DAA system to detect and track intruder aircraft will depend on the encounter geometries that unmanned aircraft are expected to have with other aircraft in the airspace. This presentation shows the analysis of the encounter geometries that were simulated using historical low-altitude traffic data and some proposed UAS missions. This analysis suggests how the overall safety and performance of a surveillance system may relate to surveillance parameters such as surveillance range, horizontal and vertical fields or regard. This study proposed and investigated potential safety and performance metrics for evaluating the performance of a surveillance system, such as the ratio of undetected and late-detected separation violations, and the time to violation at first detection for given sets of surveillance parameters.

UAS↗
NASA NTRS2019

Evaluation of a Dynamic Weather-Avoidance Rerouting Tool in Adjacent-Center Arrival Metering

Dynamic Reroutes for Arrivals in Weather (DRAW) is a NASA-developed decision-support tool for Traffic Management Coordinators (TMCs) at the Federal Aviation Administration's Air Route Traffic Control Centers ("Centers"). DRAW proposes weather-avoidance reroutes for en route arrival flights subject to metering restrictions when transitioning into a busy terminal airspace. The prior DRAW study demonstrated that TMCs' use of DRAW promotes earlier reroutes of arrivals, and reduces the number of routes conflicting with weather in the Center. The present paper focuses on how DRAW benefits metering delivery accuracy when schedule freeze horizon distance was altered. A human-in-the-loop simulation was conducted at NASA Ames Research Center in October-November 2018, where retired TMCs and controllers performed simulated metering operations for southeast arrivals through the Atlanta and Jacksonville Centers to the Hartsfield-Jackson Atlanta International Airport during convective weather periods. Results demonstrated that DRAW use reduced the frequency of manual adjustments of Scheduled Times of Arrival and lowered TMC workload. DRAW use also made the metering accuracy, the number of reroute amendments after the freeze horizon, and the en route sector controller workload more robust to the effect of different freeze horizon distance.

Air Traffic Management (ATM)↗
NASA NTRS2019

A Comparison of Two Terminal Area Detect and Avoid Well Clear Definitions

Technical requirements are currently under development for a detect and avoid system (DAA) that would support the operation of Unmanned Aircraft Systems (UAS) within the National Airspace System (NAS). Such a system would aid UAS operators in maintaining sufficient separation, or "well clear", from other aircraft in their vicinity. The first set of technical standards for a UAS DAA system (referred to as "Phase 1" requirements) was limited to UAS operations transiting through Class D, E, and G airspace to, or from, Class A (or special-use) airspace. Explicitly out of scope of the Phase 1 requirements was the operation of UAS within terminal airspace in the NAS. Fern, Rorie, Roberts and Monk (2018) explored the application of a Phase 1 DAA system within Class D terminal airspace in a human-in-the-loop simulation. The results of the study demonstrated a poor fit of the Phase 1 DAA well clear (DWC) definition to these terminal operations. The original DWC definition was designed for the en-route environment and could not account for the complex, tightly-choreographed nature of traffic typically found near an airport. The interaction of the en-route DWC definition and the terminal area traffic led to excessive DAA alerting against safely-separated traffic. The frequent alerting quickly degraded pilots' ability to discriminate between encounters where a maneuver was or was not necessary. This resulted in slower response times, higher rates of losses of DAA well clear, and more severe losses of DAA well clear than had been observed in previous DAA research (e.g., Rorie et al., 2017). The current paper reports on a follow-on study to Fern et al. (2018) that tested two DWC definitions designed to accommodate standard terminal area operating procedures, such as traffic in the downwind leg of a VFR traffic pattern while the UAS is on final. The two definitions utilized identical horizontal and vertical thresholds but differed in whether or not Tau (a function that takes into account the closure rate of two aircraft) was included as a part of the DWC hazard zone. The "Tau" DWC candidate definition nominally extended the DWC hazard zone by 15 seconds in the direction of the intruder aircraft, while the "No Tau" DWC candidate definition did not extend the DWC hazard zone. The results of this follow-on study indicated that both candidate definitions improved pilot and DAA system performance relative to Fern et al (2018). Pilot response times and rates of losses of DWC returned to levels comparable to earlier research in the en-route environment. Several important differences between the two DWC candidate definitions, however, are also discussed.

Terminal Area↗
NASA NTRS2019

Analysis of Interactions Between Urban Air Mobility (UAM) Operations and Conventional Traffic in Urban Areas: Traffic Alert and Collision Avoidance System (TCAS) Study for UAM Operations

This paper presents results on potential interaction effects from UAM (Urban Air Mobility) operations integrated into current operational scenarios by evaluating if/where/how Traffic alert and Collision Avoidance System (TCAS) alerts are triggered on-board commercial aircraft. A range of operational scenarios are evaluated with combinations of UAM vehicle route, speed, altitude, and direction along the DFW (Dallas-Fort Worth) "spine route." The effect of UAM altitude uncertainty on the above is also explored. The analysis was done for both South flow and North flow configurations of DFW. When UAM operations are deterministic, no TCAS RAs (Resolution Advisories) are issued. However, UAM altitude uncertainties point out geographic areas of concern with the associated severity of interactions.

Airspace↗
NASA NTRSDate not supplied

Detect-and-Avoid Maneuver Planning: Benefits of Including Route Recapture

Development of Detect-and-avoid (DAA) systems’ maneuver guidance requirements at RTCA has centered on tactical maneuvers away from the intruder. Recapturing the flight-plan route the initial maneuver is not directly taken into account by most DAA maneuver guidance algorithms. This work demonstrates potential challenges and inefficiencies that can arise in recapturing the route after resolving a conflict. Horizontal resolution trajectories for a test matrix of encounters with varying aircraft speeds and geometries are computed by minimizing either flight time or deviation to serve as a baseline. Turn directions computed from a reference DAA algorithm coupled with a pilot selection model and a second algorithm called Autoresolver (AR) are compared to these baseline resolution trajectories. Baseline results show that turning into the intruder yields favorable cost for most encounters. Additional analysis of pilot response data shows that only three-fourths of pilots’ horizontal maneuvers turn into intruders, a percentage much lower than the baseline results. Improvement to a DAA guidance algorithm based on findings in this work is discussed.

Route Recapture↗
NASA NTRSDate not supplied

Detect-and-Avoid Maneuver Planning: Benefits of Including Route Recapture

Development of Detect-and-avoid (DAA) systems’ maneuver guidance requirements at RTCA has centered on tactical maneuvers away from the intruder. Recapturing the flight-plan route the initial maneuver is not directly taken into account by most DAA maneuver guidance algorithms. This work demonstrates potential challenges and inefficiencies that can arise in recapturing the route after resolving a conflict. Horizontal resolution trajectories for a test matrix of encounters with varying aircraft speeds and geometries are computed by minimizing either flight time or deviation to serve as a baseline. Turn directions computed from a reference DAA algorithm coupled with a pilot selection model and a second algorithm called Autoresolver (AR) are compared to these baseline resolution trajectories. Baseline results show that turning into the intruder yields favorable cost for most encounters. Additional analysis of pilot response data shows that only three-fourths of pilots’ horizontal maneuvers turn into intruders, a percentage much lower than the baseline results. Improvement to a DAA guidance algorithm based on findings in this work is discussed.

Route Recapture↗
NASA NTRS2021

Detect-and-Avoid Safety and Operational Suitability Analysis using an Electro-Optical/Infared Sensor Model

This report documents a closed-loop analysis of an DAA system using a Electro/Optical sensor model. Safety and operational suitability metrics are computed. Results show that the safety metrics are most sensitive to the angular rate accuracy of the intruder aircraft. Trade-off between safety and operationl suitability metrics is discussed. Results from this work directly inform the requirements of an electro/optical sensors for detect-and-avoid.

Detect-and-avoid↗
NASA NTRSDate not supplied

Collision Avoidance Approach Using Deep Reinforcement Learning

A method to enable autonomous robots moving in a 2D space collision free motivates the purposed approach for collision avoidance for autonomous UAM vehicles. Challenges of autonomous collision free navigation for both problems are similar. Agents in each environment do not know the intent, or goal, of the other. Finding the time efficient paths require some level of anticipation with neighboring agents which is computationally expensive. In the original work, these obstacles were overcome with a novel application of deep reinforcement learning which offloads the online computation to an offline learning algorithm. A value network that encodes the estimated time to the goal given the agent’s state and the observable portion of the other agent’s state is trained on a baseline policy and further refined with reinforcement learning to promote time efficient collision free navigation. Online, the value network efficiently informs the agent’s decision making in the face of uncertainty of the other agent’s next move. In this paper, challenges extending this methodology to the 3D environment of autonomous UAM vehicles with kinematic constraints are discussed and initial results shown.

Collision Avoidance↗
NASA NTRSDate not supplied

Collision Avoidance Approach Using Deep Reinforcement Learning

A method to enable autonomous robots moving in a 2D space collision free motivates the purposed approach for collision avoidance for autonomous UAM vehicles. Challenges of autonomous collision free navigation for both problems are similar. Agents in each environment do not know the intent, or goal, of the other. Finding the time efficient paths require some level of anticipation with neighboring agents which is computationally expensive. In the original work, these obstacles were overcome with a novel application of deep reinforcement learning which offloads the online computation to an offline learning algorithm. A value network that encodes the estimated time to the goal given the agent’s state and the observable portion of the other agent’s state is trained on a baseline policy and further refined with reinforcement learning to promote time efficient collision free navigation. Online, the value network efficiently informs the agent’s decision making in the face of uncertainty of the other agent’s next move. In this paper, challenges extending this methodology to the 3D environment of autonomous UAM vehicles with kinematic constraints are discussed and initial results shown.

Collision Avoidance↗
NASA NTRSDate not supplied

Exploratory Contrail Studies: Transonic Truss-Braced Wing (TTBW) Contrail Assessment & National Airspace System (NAS) Impacts from Contrail Avoidance

Aviation is projected to become an increasingly large contributor to greenhouse gas emissions. Condensation trails (contrails) are visible cloud trails of water vapor made from aircraft engine exhaust. One study estimated that persistent contrails have contributed about 57% of total Effective Radiative Forcing from aviation operations. Airspace management can reduce persistent contrails and related climate change impacts. NAS Digital Twin simulation capability and Autoresolver conflict management service can be utilized to investigate persistent contrail formation avoidance. On three of the four days analyzed, TTBW persistent contrail formation length was about 10 percentage points less than Boeing 737-800 (around 3% vs 13%). On average, altitude change maneuvers in simulation reduced persistent contrail formation length by 69.8% for 0.4% increase in fuel burn and 1.2% increase in flight duration.

persistent contrails↗
NASA NTRS2015

An Assessment of the Efficacy of Launch Collision Avoidance Analysis in Providing Risk Reduction for NASA

The objective of this document is to assess the value of collision on launch assessment (COLA, often referred to as “launch COLA”) practices and provide recommendations regarding its implementation for NASA robotic missions. The scope of this effort is limited to launch COLA screens against catalog objects that are either spacecraft or debris. No modifications to manned safety launch COLA practices are considered in this effort. An assessment of the value of launch COLA can be broken down into two fundamental questions: 1) Does collision during launch represent a significant risk to either the payload being launched or the space environment? 2) Can launch collision mitigation be performed in a manner that provides meaningful risk reduction at an acceptable level of operational impact? While it has been possible to piece together partial answers to these questions for some time, the first attempt to comprehensively address them is documented in reference (a), Launch COLA Operations: an Examination of Data Products, Procedures, and Thresholds, Revision A. This report is the product of an extensive study that addressed fundamental technical questions surrounding launch collision avoidance analysis and practice. The results provided in reference (a) will be cited throughout this document as these two questions are addressed. The premise of this assessment is that in order to conclude that launch COLA is a value-added activity, the answer to both of these questions must be affirmative. A “no” answer to either of these questions points toward the conclusion that launch COLA provides little or no risk mitigation benefit. The remainder of this assessment will focus on addressing these two questions.

launch COLA↗
DOE OSTI2022

The Importance of Avoided Crossings in Understanding High Valley Degeneracy in Half‐Heusler Thermoelectric Semiconductors

Abstract Half‐Heusler (hH) compounds are promising candidates for inexpensive, low‐toxicity thermoelectric materials. It is well known that engineering electronic bands with high valley degeneracy is an effective approach for enhancing the performance of thermoelectric materials, and there are several routes for achieving high valley degeneracy in hH systems. For instance, there are multiple locations in the first Brillouin zone where the valence band maximum can be found (at the Γ‐, L‐, or W‐point), and there are two competing low‐lying conduction bands at the X‐point, where the conduction band minimum is located. By converging the multiple valence band and conduction band extrema, the valley degeneracy, and hence, performance of these materials can be improved. Here, group theoretical and tight‐binding approaches, in addition to first‐principles density functional theory calculations, are used to study the chemical origins of various band extrema in both the n‐type and p‐type compounds, with particular focus on ZrNiSn and NbFeSb. Specifically, the importance of avoided crossings is explained. The results of this work can be used to better understand and develop design strategies for engineering better performing hH thermoelectrics.

Brod, Madison K.↗
DOE OSTI2024

Protorheology in practice: Avoiding misinterpretation

Protorheology is the paradigm that any observed flow or deformation is a chance to infer quantitative rheological properties. While this creates many opportunities for insight, there is significant risk of misunderstanding the physics involved, e.g. misinterpreting a liquid as a solid or mistaking viscous flow time as viscoelastic relaxation time. We describe these and other potential mistakes, use case studies to show how serious the problems can be, and contrast misinterpretations with correct approaches and interpretations. Some issues are especially important with materials involving colloidal particles and flows involving surface tension. Whether the reader is making inference from a tilted vial, time-lapse gravity-driven flow, a bounce test, die swell, or any other protorheology observation, the examples here serve as a guide for avoiding bad data in protorheology.

42 ENGINEERING↗
DOE OSTI2022

How to avoid multiple scattering in strongly scattering SANS and USANS samples

Small Angle Neutron Scattering (SANS) and Ultra Small Angle Neutron Scattering (USANS) are the only available experimental techniques to provide seamless non-destructive measurements of the geometry of the accessible and inaccessible pore structure of rocks from sub-nanopore size to the scale of macropores. They have therefore become the measurement of choice for tight reservoir rocks such as organic rich shales. A simplifying assumption in the analysis is, however, that during the path of neutrons through the sample each neutron is only scattered once. Shales are samples with a high scattering power and Multiple Scattering (MS) may occur which requires special modelling for deconvolution of the results. The approach to avoid MS is to simply reduce the sample thickness to <0.15–0.5 mm. Here, in this work, we present a systematic method on wavelength selection and preparation of samples to optimise extraction of microstructural data and minimise parasitic errors. Experimentally measured SAS transmission (TSAS) values are used as a practical criterion for estimation of the extent of MS. Generous beamtime allocations allowed robust testing revealing that sample thicknesses can be twice as thick as predicted using the standard protocol. Analysing thicker samples is particularly beneficial for statistically relevant characterisation of heterogeneous samples making the new protocol the method of choice for such samples.

(U)SANS↗
DOE OSTI2020

Regular sensitivity computation avoiding chaotic effects in particle-in-cell plasma methods

Particle-in-cell (PIC) simulation methods are attractive for representing species distribution functions in plasmas. However, as a model, they introduce uncertain parameters, and for quantifying their prediction uncertainty it is useful to be able to assess the sensitivity of a quantity-of-interest (QoI) to these parameters. Such sensitivity information is likewise useful for optimization. However, computing sensitivity for PIC methods is challenging due to the chaotic particle dynamics, and sensitivity techniques remain underdeveloped compared to those for Eulerian discretizations. This challenge is examined from a dual particle–continuum perspective that motivates a new sensitivity discretization. Two routes to sensitivity computation are presented and compared: a direct fully-Lagrangian particle-exact approach provides sensitivities of each particle trajectory, and a new particle-pdf discretization, which is formulated from a continuum perspective but discretized by particles to take the advantages of the same type of Lagrangian particle description leveraged by PIC methods. Since the sensitivity particles in this approach are only indirectly linked to the plasma-PIC particles, they can be positioned and weighted independently for efficiency and accuracy. The corresponding numerical algorithms are presented here in mathematical detail. The advantage of the particle-pdf approach in avoiding the spurious chaotic sensitivity of the particle-exact approach is demonstrated for Debye shielding and sheath configurations. In essence, the continuum perspective makes implicit the distinctness of the particles, which circumvents the Lyapunov instability of the N -body PIC system. The cost of the particle-pdf approach is comparable to the baseline PIC simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Avoiding thermal runaway in lithium-ion batteries using ultrasound detection of early failure mechanisms

Thermal runaway leading to catastrophic failure has slowed the adoption of lithium-ion batteries, highlighting the need for early warning systems. In this work, ultrasound is used to detect physical changes in 0.950 Ah Li-ion battery cells by inducing conditions associated with thermal runaway. Ultrasound signal features are extracted as the batteries are cycled under baseline conditions and subsequently subjected to constant current and voltage overcharges. Two conditions identifying failure are defined: a warning to detect the start of overcharge and an emergency stop (E-stop), to immediately take the battery out of service. Using changes in ultrasound signal features, consistent warning and stopping classifications are applied to all failure experiments. On average, a warning notification was issued after 15% of the overcharge time and an E-stop was triggered after 35% of total overcharge duration before failure. Further testing suggests that it is possible to avoid thermal runaway by reacting to intermediate, warning notifications prior to an immediate E-stop. In other words, not only can detection derived by ultrasound identify battery failure before a catastrophic event, but can also provide early, actionable warnings so that overcharges can be detected and corrected quickly enough so the battery does not need to be decommissioned.

25 ENERGY STORAGE↗