Search NASA⌕ Search

SEARCH · Search NASA

Results for “backward”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Post-ejection impacts of the space shuttle solid rocket booster nose cap

The dynamics of impacts between the nose cap ejected from the space shuttle solid rocket booster and the drogue parachute pack are analyzed. The analysis is restricted to planar impact, and assumes the law of restitution and the possible occurrence of three types of impact, depending on the friction behavior of the colliding surfaces: forward slip; backward slip; no slip (normal rebound). The positions of both bodies and their velocities at the time of impact are required. Seven successive impacts, representing all three types, detected and simulated for the case of nose cap ejection at 20 fps normal to the direction of airflow, with selected coefficients of friction (0.25) and restitution (0.85).

Banerjee, A. K.↗

Laminar supersonic flow over a backstep - A numerical solution at higher Reynolds numbers

The Allen-Cheng solution of the flow over a backward facing step is extended to Reynolds numbers up to 16,000 and to inflow boundary-layer height ratios as low as 0.1 by moving the downstream boundary into the recompression region and by smoothing the resulting errors. The boundary conditions in the supersonic outer flow and the downstream boundary conditions in the wake are determined by an extrapolation procedure. Computational results are compared with relevant experimental data. Fair agreement is found between the calculated base pressures and the experimental values, whereas agreement between heat transfer rates appears to be qualitative only.

Kronzon, Y.↗

ALTKAL: An optimum linear filter for GEOS-3 altimeter data

ALTKAL is a computer program designed to smooth sea surface height data obtained from the GEOS 3 altimeter, and to produce minimum variance estimates of sea surface height and sea surface slopes, along with their standard derivations. The program operates by processing the data through a Kalman filter in both the forward and backward directions, and optimally combining the results. The sea surface height signal is considered to have a geoid signal, modeled by a third order Gauss-Markov process, corrupted by additive white noise. The governing parameters for the signal and noise processes are the signal correlation length and the signal-to-noise ratio. Mathematical derivations of the filtering and smoothing algorithms are presented. The smoother characteristics are illustrated by giving the frequency response, the data weighting sequence and the transfer function of a realistic steady-state smoother example. Based on nominal estimates for geoidal undulation amplitude and correlation length, standard deviations for the estimated sea surface height and slope are 12 cm and 3 arc seconds, respectively.

Fang, B. T.↗

Viscid-inviscid interaction of incompressible separated flows

A flow model has been devised to deal with the viscid-inviscid interaction of a class of two-dimensional incompressible separated flow problems. It is suggested that the corresponding inviscid flow of these problems is described by the free streamline theory with few unspecified parameters and their values are, in turn, determined by the viscous flow considerations. The problem of a flow past a backward facing step is selected for study in detail. The viscous flow components of turbulent jet mixing, recompression, and reattachment are delineated and studied individually. When they are later combined, it is found that the point of reattachment behaves as a saddle-point-type singularity in the system of differential equations describing the viscous flow process. This feature is employed to the determination of the aforementioned free parameters and thus the establishment of the overall corresponding inviscid flow field. The resulting base pressure coefficient for the specific case agrees reasonably well with the available experimental data.

Chow, W. L.↗

Asymptotic residual pump transmission characteristics in laser-induced stimulated Brillouin scattering

The considered asymptotic relationship is investigated and an expression is sought for the slope of the curve representing the relation between the residual fractional transmitted pump and the pump excitation in backward-traveling-wave amplification. It is found that the characteristic -2 slope of the oscillation curve is a unique property. Rapid exponential decay may very well constitute an inherent limiting factor for efficient energy conversion.

Hsu, H.↗

Scattering from a moving spherical particle by two crossed coherent plane waves

The Mie scattering properties of a homogeneous, isotropic spherical particle, moving at a constant velocity and illuminated by two intersecting coherent plane waves having the same polarization direction, have been analyzed based upon an exact solution to Maxwell's equations. The solutions are in a form suitable for the calculation of the time varying scattered signal integrated across a detector aperture of variable size that is centered on either the forward or backward scattering direction. This problem is of importance in defining the scattered signal in a cross beam laser Doppler velocimeter (LDV). Results obtained from calculating the integrated scattered signal indicate a strong dependence upon the following physical parameters: particle size, index of refraction, cross beam angle, and collection solid angle.

Chu, W. P.↗

Bayesian estimation of crack initiation times from service data

Lockheed C-130 Hercules aircraft have during their service life been periodically inspected and growing cracks around rivet holes were recorded. This record has recently been used to determine the statistical distributions of crack initiation times and the distribution of initial crack sizes. When crack initiation times are calculated from such cracks, by backward extrapolation of the growth relation, the resulting distribution of crack initiation times will indicate a preponderance of short times to crack initiation. If however, such distributions are combined with the reliability of the inspection procedure, the statistical distribution of missed initiation times can be estimated. The method used is based on Bayes theorem which permits the calculation of the 'prior' distribution (initiation times before inspection) from a knowledge of the 'posterior' distribution (initiation times obtained from the inspection) and a 'likelihood function' (reliability of the inspection) procedure. The results indicate that during an early inspection a large percentage of initiation times will be missed and that the fraction of located initiation times increases during later inspections.

Heller, R. A.↗

The tilt effect for Saturn's rings

Multiple-scattering computations are carried out to explain the variation of the observed brightness of the A and B rings of Saturn with declination of the earth and sun. These computations are performed by a doubling scheme for a homogeneous plane-parallel scattering medium. A range of choices is tested for the phase function, albedo for single scattering, and optical depth of both the rings. Isotropic scattering and several other simple phase functions are ruled out, and it is found that the phase function must be moderately peaked in both the forward and backward directions. The tilt effect can be explained by multiple scattering in a homogeneous layer, but, for ring B, this requires a single-scattering albedo in excess of 0.8. The brightest part of ring B must have an optical depth greater than 0.9. It is found that the tilt effect for ring A can be reproduced by particles having the same properties as those in ring B with the optical depth for the A ring in the range 0.4 to 0.6.

Esposito, L. W.↗

Stability of numerical integration techniques for transient rotor dynamics

A finite element model of a rotor bearing system was analyzed to determine the stability limits of the forward, backward, and centered Euler; Runge-Kutta; Milne; and Adams numerical integration techniques. The analysis concludes that the highest frequency mode determines the maximum time step for a stable solution. Thus, the number of mass elements should be minimized. Increasing the damping can sometimes cause numerical instability. For a uniform shaft, with 10 mass elements, operating at approximately the first critical speed, the maximum time step for the Runge-Kutta, Milne, and Adams methods is that which corresponds to approximately 1 degree of shaft movement. This is independent of rotor dimensions.

Kascak, A. F.↗

Analysis of Satellite-to-Satellite Tracking (SST) and altimetry data from GEOS-C

Radar altimetry and satellite-to-satellite (SST) range and range rate tracking measurements were used to infer the exterior gravitational field of the earth and the structure of the geoid from GEOS-C metric data. Under the SST analysis, a direct point-by-point estimate of gravity disturbance by means of a recursive filter with backward smoothing was attempted but had to be forsaken because of poor convergence. The adopted representation consists of a more or less uniform grid of discrete masses at a depth of approximately 400 km from the earth's surface. The layer is superimposed on a spherical harmonics model. The procedure for smoothing the altimetry and inferring the fine-structured gravity field over the Atlantic test area is described. The local disturbances are represented by means of a density layer. The altimeter height biases were first estimated by a least squares adjustment at orbital crossover points. After taking out the bias, long wavelength contributions from GEM-6 as well as a calibration correction were subtracted. The residual heights were then represented by a mass distribution beneath the earth's surface.

Wong, L.↗

Solution of transonic flows by an integro-differential equation method

Solutions of steady transonic flow past a two-dimensional airfoil are obtained from a singular integro-differential equation which involves a tangential derivative of the perturbation velocity potential. Subcritical flows are solved by taking central differences everywhere. For supercritical flows with shocks, central differences are taken in subsonic flow regions and backward differences in supersonic flow regions. The method is applied to a nonlifting parabolic-arc airfoil and to a lifting NACA 0012 airfoil. Results compare favorably with those of finite-difference schemes.

Ogana, W.↗

A numerical scheme to solve unstable boundary value problems

The considered scheme makes it possible to determine an unstable steady state solution in cases in which, because of lack of symmetry, such a solution cannot be obtained analytically, and other time integration or relaxation schemes, because of instability, fail to converge. The iterative solution of a single complex equation is discussed and a nonlinear system of equations is considered. Described applications of the scheme are related to a steady state solution with shear instability, an unstable nonlinear Ekman boundary layer, and the steady state solution of a baroclinic atmosphere with asymmetric forcing. The scheme makes use of forward and backward time integrations of the original spatial differential operators and of an approximation of the adjoint operators. Only two computations of the time derivative per iteration are required.

Kalnay-Rivas, E.↗

An instability of finite amplitude circularly polarized Alfven waves

A demonstration is presented that a finite-amplitude circularly-polarized Alfven wave is generally unstable in a MHD fluid. The wave decays by a four-wave coupling process in which the daughter waves are forward propagating random density and magnetic fluctuations and a backward-propagating magnetic wave. For parameters typical of the solar corona and the solar wind (thermal to magnetic energy density ratios between 0.1 and 1, and values between 0.1 and 0.9 for the ratio of magnetic energy density of the initial Alfven wave to that of the background magnetic field), large decay rates are found.

Goldstein, M. L.↗

A double shooting scheme for certain unstable and singular boundary value problems

A scheme is presented to obtain the unique bounded solution for an exponentially unstable linear system. The scheme consists of choosing random data at large initial values and integrating forwards and backwards until accurate regular boundary values are obtained. Proofs of convergence are given for the case that the homogeneous equation has an exponential dichotomy. Applications to other types of problems are discussed and numerical results are presented.

Bayliss, A.↗

The generation of gravitational waves. IV - Bremsstrahlung

Previously derived waveforms for gravitational bremsstrahlung are discussed along with their spectra and their limiting structure at high and low relative velocities. Waveforms and spectra are presented for a low-velocity bremsstrahlung encounter, and waveforms are given for encounters of arbitrary relative velocity. Limiting forms for the gravitational-wave amplitudes in the 'forward', 'intermediate', and 'backward' regions are derived in the high-velocity limit. The energy spectra seen by observers in the three regions are computed for arbitrary and high velocities. Simpler methods for analyzing special cases of the bremsstrahlung problem are examined, and the results of those methods are compared with the present results. Those methods include the quadrupole-moment and post-Newtonian formalisms, linear perturbations of the Schwarzschild metric, the method of colliding plane waves, the method of virtual quanta, and the zero-frequency limit. Classical gravitational bremsstrahlung is then compared with classical electromagnetic bremsstrahlung.

Kovacs, S. J., Jr.↗

Comparisons among second-order, fourth-order, and pseudospectral advection techniques in a mesoscale numerical model

The reported investigation is concerned with mesoscale squall-line simulation utilizing numerical techniques. Particular attention is given to fourth-order results and their implications for the dynamical evolution of mesoscale squall-line systems which contain severe local storms. An adiabatic inviscid set of prognostic equations is utilized in a z coordinate system for the fundamental experiment. The fourth-order advection is employed for all time-dependent equations. The Euler-backward time marching scheme is utilized with a 60 second time step. The horizontal mesh length is 42 km. Horizontal diffusion is accomplished by utilizing a smoother-desmoother. Lateral boundary conditions are designed to reduce the development of strong gradients in dependent variables near the boundaries by bringing interior values from the grid to the boundaries.

Kaplan, M.↗

Modulational instability of finite-amplitude, circularly polarized Alfven waves

The simple theory of the decay instability of Alfven waves is strictly applicable only to a small-amplitude parent wave in a low-beta plasma, but, if the parent wave is circularly polarized, it is possible to analyze the situation without either of these restrictions. Results show that a large-amplitude circularly polarized wave is unstable with respect to decay into three waves, one longitudinal and one transverse wave propagating parallel to the parent wave and one transverse wave propagating antiparallel. The transverse decay products appear at frequencies which are the sum and difference of the frequencies of the parent wave and the longitudinal wave. The decay products are not familiar MHD modes except in the limit of small beta and small amplitude of the parent wave, in which case the decay products are a forward-propagating sound wave and a backward-propagating circularly polarized wave. In this limit the other transverse wave disappears. The effect of finite beta is to reduce the linear growth rate of the instability from the value suggested by the simple theory. Possible applications of these results to the theory of the solar wind are briefly touched upon.

Derby, N. F., Jr.↗

Traveling wave tube circuit

A traveling wave tube (TWT) has a slow wave structure (SWS) which is severed into two or more sections. A signal path, connects the end of an SWS section to the beginning of the following SWS section. The signal path comprises an impedance matching coupler (IMC), followed by an isolator, a variable phase shifter, and a second IMC. The aggregate band pass characteristic of the components in the signal path is chosen to reject, or strongly attenuate, all frequencies outside the desired operating frequency range of the TWT and yet pass, with minimal attenuation in the forward direction, all frequencies within the desired operating frequency range. The isolator is chosen to reject, or strongly attenuate, waves, of all frequencies, which propagate in the backward direction. The aggregate phase shift characteristic of the components in the signal path is chosen to apply signal power to the beginning of the following SWS section with the phase angle yielding maximum efficiency.

Connolly, D. J.↗