Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Effects of alloying elements on the elastic properties of bcc Ti-X alloys from first-principles calculations

Titanium alloys are great implant materials due to their mechanical properties and biocompatibility. However, a large difference in Young’s modulus between bone (~10–40 GPa) and common implant mate-rials (ie. Ti-6Al-4V alloy ~ 110 GPa) leads to stress shielding and possible implant failure. Here, the present work predicts the single crystal elastic stiffness coefficients (c ij ’s) for five binary systems with the body centered cubic lattice of Ti-X (X = Mo, Nb, Ta, Zr, Sn) using first-principles calculations based on Density Functional Theory. In addition, the polycrystalline aggregate properties of bulk modulus, shear modulus, Young’s modulus, and Poisson ratio are calculated. It is shown that the lower Young’s modulus of these Ti-alloys stems from the unstable bcc Ti with a negative value of (c 11 –c 12 ). The data gathered from these efforts are compared with available experimental and other first-principles results in the literature, which set a foundation to design biocompatible Ti alloys for desired elastic properties.

36 MATERIALS SCIENCE↗

Prediction of gas hydrate saturation using machine learning and optimal set of well-logs

We report resistivity and acoustic logs are widely used to estimate gas hydrate saturation in various sedimentary systems using one of the two popular methods ((1) acoustic velocity and (2) electrical resistivity), but the limitations of these two methods are often overlooked, which include (i) well-specific calibration of empirical exponents in the electrical resistivity method, (ii) assumption of known pore morphology for gas hydrates in the acoustic velocity method, and (iii) presence of unknown mineralogy and bulk modulus terms in the acoustic velocity method. NMR-density porosity-derived gas hydrate saturation based on the analysis of the transverse magnetization relaxation time (T2) is considered the most precise method, but acquisition of NMR-based logs is limited at relatively recent drilled sites; additionally, its use in conventional oil and gas reservoirs is not that common due to higher cost and operational deployment limitations associated with acquiring NMR well-logs. This study proposes a new method that predicts gas hydrate saturation (S h ) for any well using porosity, bulk density, and compressional wave (P wave) velocity well-logs with neural network (or stochastic gradient descent regression) without any well-specific calibration and/or other aforementioned shortcomings of the existing methods. The method is developed by examining the underlying dependency between S h and different combinations of well-logs, chosen from 6 routine logs, with 12 different machine learning (ML) algorithms. The accuracy of the proposed method in predicting S h is ~ 84%, which is better than the accuracy of seismic and electrical resistivity methods (≤ 75%) per the results reported by three different studies. The robustness of the method in the specific case of permafrost-associated gas hydrates is demonstrated with well-log data from two wells drilled on the Alaska North Slope.

58 GEOSCIENCES↗

Finite Strain Analysis of Shear and Compressional Wave Velocities

Published shear-modulus measurements for a wide variety of materials (Ar, Xe, H 2 , He, NaCl, H 2 O-VII, MgO, stishovite, bridgmanite) show that the Eulerian (spatial) description of energy vs. strain fits both finite- and infinitesimal-strain (e.g., wave velocity) elasticity data under high pressure. The Eulerian (spatial) formulations do so better than the Lagrangian (material) finite-strain description, with differences of 1% to 60% in both P- and S -wave velocities for these materials at the pressures of Earth's mantle. The findings are significant in extending to shear previous findings that compressional (pressure-volume and bulk-modulus) measurements are also best fit using the spatial formulation. Our assessment empirically documents that a self-consistent Eulerian finite-strain equation of state offers a reliable means of describing the thermodynamic and elastic properties of planetary interiors.

58 GEOSCIENCES↗

Pressure-induced amorphization in orthorhombic Ta{sub 2}O{sub 5}: An intrinsic character of crystal

The phase transition of orthorhombic Ta{sub 2}O{sub 5} was investigated by in situ synchrotron X-ray diffraction and Raman spectroscopy. The orthorhombic phase transforms into an amorphous form completely at 24.7 GPa. A bulk modulus B{sub 0} = 139 (9) GPa for the orthorhombic Ta{sub 2}O{sub 5} is derived from the P-V data. We suggest that the pressure-induced amorphization (PIA) in Ta{sub 2}O{sub 5} can be attributed to the unstability of the a axis under high pressure leads to the connections of polyhedral breaking down and even triggers disorder of the whole crystal frame. These results demonstrate that the PIA is an intrinsic character of Ta{sub 2}O{sub 5} which depends on its orthorhombic crystal structure rather than nanosize effects. This study provides a new kind of bulk material for investigating PIA in metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principle studies of Ca-X (X=Si,Ge,Sn,Pb) intermetallic compounds

The structural properties, elastic properties, heats of formation, electronic structures, and densities of states of 20 intermetallic compounds in the Ca-X (X=Si, Ge, Sn, Pb) systems have been systematically investigated by using first-principle calculations. Our computational results indicated that with increasing atomic weight of X, the bulk modulus of Ca-X intermetallic compounds decreases gradually. It was also found that Ca{sub 36}Sn{sub 23} and CaPb are mechanically unstable phases. Results on the electronic energy band and densities of states also indicated that Ca{sub 3}Si{sub 4} is an indirect band gap semiconductor with a band gap of 0.598 eV, and Ca{sub 2}Si, Ca{sub 2}Ge, Ca{sub 2}Sn, and Ca{sub 2}Pb are direct band gap semiconductors with band gaps of 0.324, 0.265, 0.06, and 0.07 eV, respectively. In addition, it is found that the absolute values of heats of formation for all Ca-X intermetallics are larger than 30 kJ/mol atom. - Graphical abstract: Calculated (a) bulk moduli and (b) shear moduli of Ca-X system intermetallic compounds.

36 MATERIALS SCIENCE↗

First-Principles Investigation of Mechanical and Thermodynamic Properties of Nickel Silicides at Finite Temperature

First-principles calculations are performed to investigate lattice parameters, elastic constants and 3D directional Young’s modulus E of nickel silicides (i.e., β-Ni{sub 3}Si, δ-Ni{sub 2}Si, θ-Ni{sub 2}Si, ε-NiSi, and θ-Ni{sub 2}Si), and thermodynamic properties, such as the Debye temperature, heat capacity, volumetric thermal expansion coefficient, at finite temperature are also explored in combination with the quasi-harmonic Debye model. The calculated results are in a good agreement with available experimental and theoretical values. The five compounds demonstrate elastic anisotropy. The dependence on the direction of stiffness is the greatest for δ-Ni{sub 2}Si and θ-Ni{sub 2}Si, when the stress is applied, while that for β-Ni{sub 3}Si is minimal. The bulk modulus B reduces with increasing temperature, implying that the resistance to volume deformation will weaken with temperature, and the capacity gradually descend for the compound sequence of β-Ni{sub 3}Si > δ-Ni{sub 2}Si > θ-Ni{sub 2}Si > ε-NiSi > θ-Ni{sub 2}Si. The temperature dependence of the Debye temperature ΘD is related to the change of lattice parameters, and ΘD gradually decreases for the compound sequence of ε-NiSi > β-Ni{sub 3}Si > δ-Ni{sub 2}Si > θ-Ni{sub 2}Si > θ-Ni{sub 2}Si. The volumetric thermal expansion coefficient αV, isochoric heat capacity and isobaric heat capacity C{sub p} of nickel silicides are proportional to T{sup 3} at low temperature, subsequently, αV and C{sub p} show modest linear change at high temperature, whereas C{sub v} obeys the Dulong-Petit limit. In addition, β-Ni{sub 3}Si has the largest capability to store or release heat at high temperature. From the perspective of solid state physics, the thermodynamic properties at finite temperature can be used to guide further experimental works and design of novel nickel–silicon alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of pressure on elastic, mechanical and electronic properties of WSe{sub 2}: A first-principles study

Highlights: • B, E and v increase as pressure increases, except for a sudden decrease at 40 GPa. • WSe{sub 2} under pressure has larger shear modulus and higher hardness than WSe{sub 2} at 0 GPa. • WSe{sub 2} has an isostructural semiconductor-semimetal phase transition at 40 GPa. • The covalent bonding between Se and W atoms in the slabs is enhanced under pressure. • The distance of the stacked Se–W–Se slabs is decreased with the increasing pressure. - Abstract: Effect of pressure on elastic, mechanical and electronic properties of WSe{sub 2} has been investigated using the first-principles calculations. The calculated lattice parameters, band structure and elastic constants of WSe{sub 2} at 0 GPa are in good agreement with the available experimental and calculational values. With the increasing pressure, the lattice parameters and volume of WSe{sub 2} decrease whereas the total enthalpy increases. The bulk modulus, Young's modulus and Poisson's ratio of WSe{sub 2} increase with the increasing pressure, except for a sharp decrease at the pressure of 40 GPa. WSe{sub 2} under pressure has larger shear modulus and higher hardness than WSe{sub 2} at 0 GPa. With the increase of pressure, the covalent bonding between Se and W atoms in the slabs is enhanced whereas the distance of the stacked slabs is decreased. Additionally, an isostructural semiconductor-semimetal phase transition of WSe{sub 2} is found to take place at 40 GPa, which is consistent with the experimental observations.

36 MATERIALS SCIENCE↗

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗

Elastic knowledge base of bcc Ti alloys from first-principles calculations and CALPHAD-based modeling

Here, titanium alloys are being investigated as suitable materials for load-bearing implants because of their biocompatibility and mechanical properties. Stress shielding, a common issue with the current load-bearing implant materials, occurs due to a Young’s modulus (E) mismatch between bone (~10–40 GPa) and implants (such as Ti-6Al-4V ~ 110 GPa), which leads to bone dying around the implant and ultimately implant failure. Reducing the Young’s modulus of Ti alloys may overcome the issues of stress shielding and improve implant materials. In the present work, first-principles calculations have been used to predict the single crystal elastic stiffness coefficients (c ij ’s) for the Ti-containing ternary alloys Ti-X-Y(X ≠ Y = Mo, Nb, Sn, Ta, Zr) in the bcc lattice. It is found that the ternary Ti-X-Y (X ≠ Y = Mo, Nb, Ta) alloys behave similarly; so do the ternary Ti-X-Sn (X = Mo, Nb, Ta) alloys and the Ti-X-Zr (X = Mo, Nb, Ta) alloys. This is expected due to the similarity between the Mo, Nb and Ta elements. The results also show that the Ti-Zr-X alloys stabilized the bcc phase at lower alloying concentrations. The polycrystalline aggregate properties are also estimated from the c ij ’s, including bulk modulus, shear modulus and Young’s modulus. The results show that Ti-alloys with compositions close to the bcc stability limit have the lowest E. In combination with previous predictions, a complete elastic database has been established using theCALPHAD (CALculation of PHAse Diagram) based modeling approach. The database results are compared with the E of higher order Ti alloys and shown to be able to predict the E accurately. This complete data-base forms a foundation to tailor Ti alloys for desired elastic properties.

36 MATERIALS SCIENCE↗

High-pressure behavior of α-boron studied on single crystals by X-ray diffraction, Raman and IR spectroscopy

In the present study single crystals of rhombohedral α-B were investigated under pressure to 60 GPa by means of single-crystal X-ray diffraction. The bulk modulus of α-B was found to be K=224(7) GPa (K′=3.0(3)). Measurements of interatomic distances as a function of pressure revealed that the intericosahedral two-center two-electron (2c–2e) bonds are almost as stiff as some of intraicosahedral ones. The three-center two-electron (3c–2e) intericosahedral bonds show much higher compliance compared to other bonds in α-B. The vibrational properties of α-B under pressure were investigated by Raman spectroscopy at pressures up to 160 GPa and IR spectroscopy at pressures up to 53 GPa. - Graphical abstract: The rhombohedral α-B is highly incompressible and extremely stable: it maintains its crystal structure up to 160 GPa and its intericosahedral 2e2c bonds are almost as stiff as some of intraicosahedral ones. - Highlights: • Structural stability of α-B has been investigated up to 160 GPa on single crystals. • Single-crystal x-ray diffraction reveals that α-B is highly incompressible. • Compressibility of B{sub 12} icosahedra is considerably lower than that of the bulk material. • Intericosahedral 2e2c bonds are almost as stiff as some of intraicosahedral ones.

36 MATERIALS SCIENCE↗

Thermal equation of state of hcp-iron: Constraint on the density deficit of Earth's solid inner core: THERMAL EQUATION OF STATE OF HCP-IRON

We conducted high-pressure experiments on hexagonal close packed iron (hcp-Fe) in MgO, NaCl, and Ne pressure-transmitting media and found general agreement among the experimental data at 300 K that yield the best fitted values of the bulk modulus K 0 = 172.7(±1.4) GPa and its pressure derivative K 0 '= 4.79(±0.05) for hcp-Fe, using the third-order Birch-Murnaghan equation of state. Using the derived thermal pressures for hcp-Fe up to 100 GPa and 1800 K and previous shockwave Hugoniot data, we developed a thermal equation of state of hcp-Fe. The thermal equation of state of hcp-Fe is further used to calculate the densities of iron along adiabatic geotherms to define the density deficit of the inner core, which serves as the basis for developing quantitative composition models of the Earth's inner core. We determine the density deficit at the inner core boundary to be 3.6%, assuming an inner core boundary temperature of 6000 K.

58 GEOSCIENCES↗

Phase Transitions in Orthoenstatite and Subduction Zone Dynamics: Effects of Water and Transition Metal Ions

Synchrotron–based high–pressure and temperature single–crystal X–ray diffraction experiments were conducted on two hydrous orthoenstatite samples (oEn#1: Mg 1.004 Si 0.996 O 3 , ~619 ppm water; oEn#2: Mg 0.947 Ni 0.055 Si 0.998 O 3 , ~696 ppm water) to ~34 GPa and 700 K, using resistively heated diamond anvil cells. The α–opx (Pbca space group)→β–opx (P2 1 /c space group) phase transition of oEn#1 occurs at 12.90(2) GPa, and the β–opx phase persists to 34.25(1) GPa. The α–β transition of oEn#2 occurs at 13.50(1) GPa, and a new isosymmetric β–opx→β–opxII transition takes place at 29.80(4) GPa. The β–opxII phase is preserved down to 24.53(3) GPa during decompression. The transition to the monoclinic β–opxII phase is interpreted as a result of incorporation of Ni 2+ into the orthoenstatite structure. Fitting the third–order Birch–Murnaghan thermal equation of state to the single–crystal P–V–T data yields the thermoelastic parameters of the α– and β–opx phases for both orthoenstatite samples. This study is the first attempt to determine the thermal equation of state of the β–opx phase. Our results suggest that several hundred ppm of water has negligible effects on the bulk modulus of orthoenstatite but notably enhances the thermal expansion. The potential effects of metastable orthoenstatite on subduction zone dynamics are discussed, and the possible contributions of displacive phase transitions to enhancement of the transformational faulting mechanism of the deep–focus earthquakes in subducted slabs are considered. In conclusion, the presence of metastable orthoenstatite within cold slabs could promote slab stagnation above the 660–km discontinuity.

58 GEOSCIENCES↗

High‐Pressure Synthesis of Ultra‐Incompressible, Hard and Superconducting Tungsten Nitrides

Abstract Transition metal nitrides, particularly those of 5 d metals, are known for their outstanding properties, often relevant for industrial applications. Among these metal elements, tungsten is especially attractive given its low cost. In this high‐pressure investigation of the W–N system, two novel ultra‐incompressible tungsten nitride superconductors, namely W 2 N 3 and W 3 N 5 , are successfully synthesized at 35 and 56 GPa, respectively, through a direct reaction between N 2 and W in laser‐heated diamond anvil cells. Their crystal structure is determined using synchrotron single‐crystal X‐ray diffraction. While the W 2 N 3 solid's sole constituting nitrogen species are N 3‐ units, W 3 N 5 features both discrete N 3‐ as well as N 2 4‐ pernitride anions. The bulk modulus of W 2 N 3 and W 3 N 5 is experimentally determined to be 380(3) and 406(7) GPa, and their ultra‐incompressible behavior is rationalized by their constituting WN 7 polyhedra and their linkages. Importantly, both W 2 N 3 and W 3 N 5 are recoverable to ambient conditions and stable in air. Density functional theory calculations reveal W 2 N 3 and W 3 N 5 to have a Vickers hardness of 30 and 34 GPa, and superconducting transition temperatures at ambient pressure (50 GPa) of 11.6 K (9.8 K) and 9.4 K (7.2 K), respectively. Additionally, transport measurements performed at 50 GPa on W 2 N 3 corroborate with the calculations.

Chemistry↗

Quasi-Harmonic Lattice Dynamics of a Prototypical Metal–Organic Framework

Quasi-harmonic lattice-dynamical calculations are performed to investigate the combined effect of temperature and pressure on the structural and mechanical properties of a prototypical metal–organic framework material: MOF-5. The softening upon compression of an A 2 g phonon mode at the Γ point in the high-symmetry F m 3 ¯ m structure is identified, which leads to a symmetry reduction and a group–subgroup phase transition to a low-symmetry F m 3 ¯ phase for compressions larger than 0.8%. The effect of the symmetry reduction on the equation-of-state of MOF-5 is investigated, which provides a static bulk modulus K reducing from 17 to 14 GPa and a corresponding change of K ' (pressure derivative of K ) from positive to negative. The effect of pressure on the negative thermal expansion of the framework and on its mechanical response is analyzed. The evolution of the mechanical anisotropy of MOF-5 as a function of pressure is also determined, which allows identifying the occurrence of a shear-induced mechanical instability at 0.45 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accuracy and convergence properties of the fixed-stress iterative solution of two-way coupled poromechanics

Here, the paper deals with the numerical solution of Biot's equations of coupled consolidation obtained by a mixed formulation combining continuous Galerkin finite–element and multipoint flux approximation finite–volume methods. The solution algorithm relies on the recently developed fixed–stress solution scheme, in which first the flow problem and then the mechanical one are addressed iteratively. We show that the algorithm can be interpreted as a particular block triangular preconditioning strategy applied within a Richardson iteration. The key component to the success of the preconditioner is the sparse approximation to the Schur complement based on a pressure space mass matrix scaled by a weighting factor that depends element–wise on the inverse of a suitable bulk modulus. The accuracy of the method is assessed, making use of well–known analytical solutions from the literature. Numerical results demonstrate robustness and low computational cost of the fixed–stress scheme in accurately capturing the two–way coupling between deformation and pressure.

58 GEOSCIENCES↗

Modeling nonlinear response of fractured rocks and reservoirs

Summary Since the early work of Athey (1930), there have been many attempts to describe the various nonlinear behaviors of rocks and soils in terms of functionals having only a few parameters, while nevertheless being able to fit the complicated available data with satisfactory accuracy. Such approaches have not been universally applied however, and the present analyses are intended to draw attention to the possibility of using such nonlinear fitting methods on old as well as new data sets. In particular, some special emphasis is placed here on re‐examining the well‐known laboratory data of Coyner (1984) on rocks in light of such modeling tools, and we find that the nonlinear approach again has several clear advantages – especially in terms of reducing the number of variables needed to describe the observed behavior of both bulk modulus and porosity of rocks undergoing large changes in pressure. Copyright © 2016 John Wiley & Sons, Ltd.

Berryman, James G.↗