Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Origin of enhanced water oxidation activity in an iridium single atom anchored on NiFe oxyhydroxide catalyst

The efficiency of the synthesis of renewable fuels and feedstocks from electrical sources is limited, at present, by the sluggish water oxidation reaction. Single-atom catalysts (SACs) with a controllable coordination environment and exceptional atom utilization efficiency open new paradigms toward designing high-performance water oxidation catalysts. Here, using operando X-ray absorption spectroscopy measurements with calculations of spectra and electrochemical activity, we demonstrate that the origin of water oxidation activity of IrNiFe SACs is the presence of highly oxidized Ir single atom (Ir 5.3+ ) in the NiFe oxyhydroxide under operating conditions. We show that the optimal water oxidation catalyst could be achieved by systematically increasing the oxidation state and modulating the coordination environment of the Ir active sites anchored atop the NiFe oxyhydroxide layers. Based on the proposed mechanism, we have successfully anchored Ir single-atom sites on NiFe oxyhydroxides (Ir 0.1 /Ni 9 Fe SAC) via a unique in situ cryogenic–photochemical reduction method that delivers an overpotential of 183 mV at 10 mA · cm – 2 and retains its performance following 100 h of operation in 1 M KOH electrolyte, outperforming the reported catalysts and the commercial IrO 2 catalysts. These findings open the avenue toward an atomic-level understanding of the oxygen evolution of catalytic centers under in operando conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syngas Conversion to Hydrocarbon Fuels through Mixed Alcohol Intermediates

Synthesis gas (syngas) can be used to synthesize a variety of fuels and chemicals. Domestic transportation and military operational interests have driven continued focus on domestic syngas-based fuels production. Liquid transportation fuels may be made from syngas via four basic processes: 1) higher alcohols, 2) Fischer-Tropsch (FT), 3) methanol-to-gasoline (MTG), and 4) methanol-to-olefins (MTO) and olefins-to-gasoline/distillate (MOGD). Compared to FT and higher alcohols, MTG and MTO-MOGD have received less attention in recent years. Due to the high capital cost of these synthetic fuel plants, the production cost of the finished fuel cannot compete with petroleum-derived fuel. Pacific Northwest National Laboratory has recently evaluated one way to potentially reduce capital cost and overall production cost for MTG by combining the methanol and MTG syntheses in a single reactor. The concept consists of mixing the conventional MTG catalyst (i.e. HZSM-5) with an alcohol synthesis catalyst. It was found that a methanol synthesis catalyst, stable at high temperature (i.e. Pd/ZnO/Al2O3) [1], when mixed with ZSM-5, was active for syngas conversion. Relatively high syngas conversion can be achieved as the equilibrium-driven conversion limitations for methanol and dimethyl ether are removed as they are intermediates to the final hydrocarbon product. However, selectivity control was difficult to achieve as formation of undesirable durene and light hydrocarbons was problematic [2]. The objective of the present study was thus to evaluate other potential composite catalyst systems and optimize the reactions conditions for the conversion of syngas to hydrocarbon fuels, through the use of mixed alcohol intermediates. Mixed alcohols are of interest as they have recently been reported to produce higher yields of gasoline compared to methanol [3]. 1. Lebarbier, V.M., Dagle, R.A., Kovarik, L., Lizarazo-Adarme, J.A., King, D.L., Palo, D.R., Catalyst Science & Technology, 2012, 2, 2116-2127. 2. Zhu, Y., Jones, S.B., Biddy, M.J., Dagle, R.A., Palo, D.P., Bioresource Technology, 2012, 117, 341-351. 3. Gujar, A.C., Guda, V.K., Nolan, M., Yan W., Toghiani, H., White, M.G., Applied Catalysis A: General, 2009, 363, 115-121.

syngas, catalysis, mixed alchohols, biomass, fossi↗

Evaluating the Origins of Aerobic Oxidation Catalysis with TAM-3, a MOF with Accessible Co(II) Sites and Large Pores

Metal-organic frameworks (MOFs) are attractive platforms that merge concepts of homogeneous and heterogeneous catalysis. Catalyst design and optimization are enabled by an array of synthetic methods that offer independent control over the local chemical structure of lattice-embedded metal ions (i.e., ligand identity and geometry) and the long-range materials properties (i.e., porosity). Establishing the origin of catalytic activity in MOF-promoted reactions remains a significant challenge: The relative rates of catalyst turnover and substrate diffusion dictate the extent to which interstitial sites are accessible and operational in catalysis. To minimize the contributions of surface sites in catalysis, materials with large pore dimensions are often sought, however, the impact of pore expansion on the origins of catalytic activity is similarly challenging to establish. Here, we describe TAM-3, a Co(II) based MOF with accessible metal sites supported by a facially coordinating tris-tetrazole ligand set. TAM-3 features large channel-like pores (17 × 23 Å) and promotes aerobic C−H oxidation and olefin epoxidation. Using a set of simple kinetics experiments, based on the analysis of kinetic isotope effects and olefin oxidation diastereoselectivities, we demonstrate that despite the large pores, interstitial metal ions do not significantly contribute to the observed substrate oxidation. This study highlights the importance of conducting kinetic experiments to assess the origin of apparent catalytic activity with MOFs and the challenge of harnessing reactive oxidants with microporous catalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deciphering Reaction Mechanisms of Molecular Proton Reduction Catalysts with Cyclic Voltammetry: Kinetic vs Thermodynamic Control

The kinetics and thermodynamics of elementary reaction steps involved in the catalytic reduction of protons to hydrogen define the reaction landscape for catalysis. The mechanisms can differ in the order of the elementary proton transfer, electron transfer, and bond-forming steps and can be further differentiated by the sites at which protons and electrons localize. Access to fully elucidated mechanistic, kinetic, and thermochemical details of molecular catalysts is crucial to facilitate the development of new catalysts that operate with optimal efficiency, selectivity, and durability. The mechanism by which a catalyst operates, as well as the kinetics and thermodynamics associated with the individual steps, can often be accessed through electroanalytical studies. Here, this Account details the application of cyclic voltammetry to interrogate reaction mechanisms and quantify the kinetics and thermodynamics of elementary reaction steps for a series of molecular catalysts that mediate electrochemical proton reduction. I distinguish the limiting scenarios wherein a catalyst operates under kinetic control vs thermodynamic control, with a focus on detecting how cyclic voltammetry features shift with proton source strength and concentration, as well as scan rate. For systems that operate under kinetic control, catalytic currents are observed at, or slightly positive toward, the formal potential for the redox process that triggers catalysis. Under thermodynamic control, catalytic responses shift as a function of the proton source pKa and effective pH of the solution. After drawing this distinction, we introduce the appropriate voltammetry experiments and accompanying analytical expressions for extracting key metrics from the data. To illustrate analytical strategies to quantify elementary reaction steps of catalysts operating under kinetic control, I describe our studies of proton reduction catalysts Co(dmgBF 2 ) 2 (CH 3 CN) 2 (dmgBF 2 = difluoroboryl-dimethylglyoxime) and [Ni(P 2 Ph N 2 Ph ) 2 ] 2+ (P 2 Ph N 2 Ph = 1,5-phenyl-3,7-phenyl-1,5-diaza-3,7-diphosphacyclooctane). Here, peak shift analysis, foot-of-the-wave analysis, and plateau current analysis are applied to data sets wherein voltammetric response are recorded as a function of catalyst concentration, proton source concentration, proton source strength, and scan rate to quantify rate constants for elementary proton transfer and bond-forming steps in a catalytic cycle. Further, the case study of [Ni(P 2 Ph N 2 Ph ) 2 ] 2+ illustrates how complementary spectroscopic methods can bolster the mechanistic assignment. Collectively, these two studies showcase how detailed mechanistic studies inform on rate-limiting elementary steps in catalysis and other key processes underpinning catalysis. Second, I present analytical strategies to interrogate catalysts operating under thermodynamic control, centered on the case study of [Ni II (P 2 Ph N 2 Bn ) 2 ] 2+ (P 2 Ph N 2 Bn = 1,5-dibenzyl-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane). Here, the application of nonaqueous Pourbaix theory to extract thermodynamic information is introduced, and the construction of a coupled Pourbaix diagram is detailed. This study identifies ligand-based protonation as the key process that places catalysis under thermodynamic control and influences the reaction mechanism. Together, the work detailed in this Account showcases the utility of electroanalytical methods to disentangle complex reaction mechanisms and extract key thermochemical and kinetic parameters for elementary steps of catalysis. Through detailed presentation of the key analytical expressions that underpin these analyses, this Account seeks to facilitate the adoption of cyclic voltammetry by the community to fully extract kinetic, thermochemical, and mechanistic information on electrochemical small-molecule activation.

catalysts↗

Hydrodesulfurization Properties of Cobalt–nickel Phosphide Catalysts. Ni-rich Materials are Highly Active

The HDS properties of a series of Co x Ni 2-x Py/SiO 2 catalysts have been investigated as a function of the Co/Ni molar ratio (for a fixed P/Me molar ratio) and of the P/Me molar ratio (for a fixed Co/Ni molar ratio). An oxidic precursor composition of Co 0.08 Ni 1.92 P 2.00 on the silica support yielded the bimetallic phosphide phase having the highest HDS activity, 34% higher than that of an optimized nickel phosphide catalyst prepared from an oxidic precursor having a composition of Ni 2.00 P 1.60 . X-ray photoelectron spectroscopy revealed Ni-rich Co x Ni 2-x P y /SiO 2 catalysts to have surface enrichment of P (relative to Ni 2.00 P 1.60 /SiO 2 and Co 2.00 P 1.00 /SiO 2 catalysts) and to incorporate remarkably low amounts of S during HDS testing. The high activity of these Co x Ni 2-x Py/SiO 2 catalysts is attributed to surface enrichment of P relative to nickel phosphide, which results in improved resistance to S incorporation under HDS conditions. Consistent with these findings and the solid-state chemistry evidence that suggests that Ni atoms in Ni-rich Co x Ni 2-x Py/SiO 2 catalysts occupy disproportionately more pyramidal M(2) sites than tetrahedral M(1) sites, we conclude that the high site densities of these catalysts are due to Ni atoms in surface M(2) sites, which results in P-enriched surfaces that are resistant to site blockage due to S incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Handling of Ammonium Nitrate Mother-Liquid Radiochemical Production - 13089

The aim of the work is to develop a basic technology of decomposition of ammonium nitrate stock solutions produced in radiochemical enterprises engaged in the reprocessing of irradiated nuclear fuel and fabrication of fresh fuel. It was necessary to work out how to conduct a one-step thermal decomposition of ammonium nitrate, select and test the catalysts for this process and to prepare proposals for recycling condensation. Necessary accessories were added to a laboratory equipment installation decomposition of ammonium nitrate. It is tested several types of reducing agents and two types of catalyst to neutralize the nitrogen oxides. It is conducted testing of modes of the process to produce condensation, suitable for use in the conversion of a new technological scheme of production. It is studied the structure of the catalysts before and after their use in a laboratory setting. It is tested the selected catalyst in the optimal range for 48 hours of continuous operation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Composite biopolymer electrolytes for high-performance reversible zinc-air batteries

Zinc-air batteries (ZABs) are regarded as one of the most promising candidates for next-generation energy storage systems due to their inherent safety, high energy density, and low cost. In this study, we optimized the composition of gel polymer electrolytes (GPEs), which play a crucial role in enhancing ZAB reversibility due to their water retention capabilities. The GPEs are synthesized using a combination of polyacrylic acid (PAA), polyacrylamide (PAM), and biopolymer kappa-carrageenan (KC), with and without additional additives. Among these, the composite GPE containing KC, PAA, and PAM demonstrated superior ionic conductivity (6.68 mS/cm at 30 °C) and enhanced water retention compared to the PAA–PAM-based GPE. Furthermore, this composite electrolyte operates within a wider electrochemical window of −1.0 V–2.2 V. A bifunctional catalyst, nickel–iron layered double hydroxide (NiFe-LDH), is electrochemically synthesized on a modified activated carbon cloth (CC). The catalyst loading is optimized based on oxygen evolution reaction (OER) performance, showing an overpotential of 555 mV. The oxygen reduction reaction (ORR) occurred at a half-wave potential of 0.620 V, which is lower than that of Pt/C (0.852 V), indicating better catalytic activity. The KC based cell exhibit better cycling stability than PAA–PAM-based GPE. The electrochemical performance of ZAB cells is evaluated under various atmospheres: ambient air and humid conditions and temperatures. Notably, in a humid environment, the cells achieved extended cycling stability, operating for over 500 h—significantly longer than under open-air conditions. Overall, this study highlights the importance of tailored GPE design and efficient bifunctional catalysts to enhance the performance and longevity of zinc-air batteries for long-duration energy storage applications.

Catalyst↗

High catalytic performance of Fe-Ni/Palygorskite in the steam reforming of toluene for hydrogen production

The inexpensive and abundant material, palygorskite, was used as a promising catalyst support to prepare Fe-Ni/Pal catalysts. Catalytic steam reforming of toluene as a biomass tar model compound over these catalysts was investigated in a fixed-bed reactor under different parameters, including reaction temperatures and S/C molar ratios. The stability and lifetime of Fe 3 Ni 8 /Palygorskite catalyst was evaluated under optimal conditions and its kinetic parameters were determined as well. The fresh and used catalysts were characterized using X-ray diffraction (XRD), H 2 temperature-programmed reduction (H 2 -TPR), transmission electron microscopy (TEM), and Raman spectra. The results showed that the Fe 3 Ni 8 /Palygorskite catalyst with high dispersion was successfully prepared and exhibited superior catalytic performance compared with those of the monometallic catalysts (Fe 3 /Palygorskite and Ni 8 /Palygorskite) and the bare Palygorskite. Increasing the reaction temperature from 500 °C to 700 °C was beneficial for the toluene conversion and gaseous yields. The catalytic activity of Fe 3 Ni 8 /Palygorskite varied distinctly with the increase of S/C molar ratio and reached maximum at the the S/C molar ratio of 1.0. The apparent activation energy of 41.55 kJ mol -1 and the pre-exponential factor of 1.35 × 10 3 m 3 kg -1 h -1 were obtained for Fe 3 Ni 8 /Palygorskite in kinetic studies under optimal reaction conditions, respectively. Here, the carbon deposition analysis of the used catalysts revealed that the formation of graphitic carbon rather than amorphous carbon was the main reason for the deactivation of Fe 3 Ni 8 /Palygorskite catalysts. When ceased the injection of steam into the reaction system, the graphitic carbon would be accelerating formed on the surface of the Fe 3 Ni 8 /Palygorskite and decreased its catalytic activity for toluene conversion. But owing to the water gas shift reaction, the catalytic activity of Fe 3 Ni 8 /Palygorskite seemed to recover gradually to its optimum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water–Gas Shift Reaction on K/Cu(111) and Cu/K/TiO 2 (110) Surfaces: Alkali Promotion of Water Dissociation and Production of H 2

The addition of potassium atoms to Cu(111) and Cu/TiO 2 (110) surfaces substantially enhances the rate for water dissociation and the production of hydrogen through the water–gas shift reaction (WGS, CO + H 2 O → H 2 + CO 2 ). In the range of temperatures investigated, 550–625 K, Cu/K/TiO 2 (110) exhibits a WGS activity substantially higher than those of K/Cu(111), Cu(111), and Cu/ZnO(000$\bar{1}$) systems used to model an industrial Cu/ZnO catalyst. The apparent activation energy for the WGS drops from 18 Kcal/mol on Cu(111) to 12 Kcal/mol on K/Cu(111) and 6 Kcal/mol on Cu/K/TiO 2 (110). The results of density functional calculations show that K adatoms favor the thermochemistry for water dissociation on Cu(111) and Cu/TiO 2 (110) with the cleavage of an O–H bond occurring at room temperature. Furthermore, at the Cu/K/TiO 2 interface, there is a synergy, and this system has a unique ability to dissociate the water molecule and catalyze hydrogen production through the WGS process. Therefore, when optimizing a regular catalyst, it is essential to consider mainly the effects of an alkali promoter on the metal–oxide interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reproducible Preparation of Au/TS-1 with High Reaction Rate for Gas Phase Epoxidation of Propylene

A refined and reliable synthesis procedure for Au/TS-1(Si/Ti molar ratio {approx}100) with high reaction rate for the direct gas phase epoxidation of propylene has been developed by studying the effects of pH of the gold slurry solution, mixing time, and preparation temperature for deposition precipitation (DP) of Au on TS-1 supports. Au/TS-1 catalysts prepared at optimal DP conditions (pH {approx} 7.3, mixing for 9.5 h, room temperature) showed an average PO rate {approx} 160 g{sub PO} h{sup -1} kg{sub Cat}{sup -1} at 200 C at 1 atm. A reproducibility better than {+-}10% was demonstrated by nine independent samples prepared at the same conditions. These are the highest rates yet reported at 200 C. No visible gold particles were observed by the HRTEM analysis in the fresh Au/TS-1 with gold loading up to {approx}0.1 wt%, indicating that the gold species were smaller than 1 nm. Additionally, the rate per gram of Au and the catalyst stability increased as the Au loading decreased, giving a maximum value of 500 g{sub PO} h{sup -1} g{sub Au}{sup -1}, and Si/Ti molar ratios of {approx}100 gave the highest rates.

42 ENGINEERING↗

Unraveling 1-Hexene Hydrogenation over Dilute Pd-in-Au Alloys

Dilute Pd-in-Au alloys are valuable materials for selectively hydrogenating alkynes and isomerizing alkenes. By diluting Pd in a Au host, the selectivity toward semihydrogenated alkene isomers can be significantly enhanced and the unfavorable overhydrogenation to alkanes is suppressed. However, a detailed mechanistic study on the origin of the enhanced alkene selectivity over dilute alloy catalysts is still missing. Here, we combine experiment and theory to unravel the reaction mechanism, identifying rate-limiting and selectivity-controlling steps in 1-hexene hydrogenation over dilute Pd-in-Au catalysts. Using isotope-exchange hydrogenation experiments, we show that 1-hexene and hydrogen over a bimetallic Pd4Au96 in silica catalyst preferentially form 1-hexene isomers, (trans and cis) 2- and 3-hexene and only a small amounts of hexane. The reaction is consistent with a Horiuti–Polanyi mechanism, similar to a monometallic Pd nanoparticle catalyst. Computation of the free-energy profiles for 1-hexene hydrogenation and isomerization over a single Pd atom in a Au surface using first principles calculations indicated that the isomerization of 1-hexene to 2-hexene is energetically favorable due to the relatively large barrier for H2 dissociation preventing hydrogenation to n-hexane. Microkinetic modeling established that H2 dissociation on the single-atom Pd sites and H spillover from these sites onto the Au host are rate-limiting and key in steering the selectivity of dilute Pd-in-Au alloys toward the hexene isomers. Furthermore, the mechanistic insights from this study contribute to the rational design of optimized dilute alloy catalysts for selective alkene isomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Building novel Ag/CeO{sub 2} heterostructure for enhancing photocatalytic activity

Highlights: • Ag nanoparticle is designed to building Schottky heterojunction on CeO{sub 2} nanocube. • The photocatalytic activity of Ag/CeO{sub 2} heterostructure is much enhanced. • 95.33% of MB can be effectively degraded within half an hour. • Ag as acceptor of photoelectrons blocks the recombination of electron–hole pairs. - Abstract: Stable and recyclable photocatalysts with high efficiency to degrade organic contamination are important and widely demanded under the threat of the environment pollution. Ag/CeO{sub 2} heterostructure is designed as a photocatalyst to degrade organic dye under the simulated sunlight. The catalytic activity of CeO{sub 2} nanocubes (NCs) to degrade methylene blue (MB) is obviously enhanced when Ag nanoparticles (NPs) are deposited on the surface of them. The weight ratio of Ag and CeO{sub 2} in forming high efficiency catalyst, the amount of Ag/CeO{sub 2} catalyst used in degradation process, and the dye concentration and pH value of the initial MB solution are examined systematically. 95.33% of MB can be effectively degraded within half an hour when 50 mg of Ag/CeO{sub 2} catalyst in an optimal weight ratio of 1:3, is added to the 100 mL of MB solution (c{sub 0} = 1 × 10{sup −5} mol L{sup −1}, pH 6.2). The mechanism of the enhanced catalytic activity of Ag/CeO{sub 2} heterostructure is discussed. The photocatalytic degradation rate is found to obey pseudo-first-order kinetics equations according to Langmuir–Hinshelwood model. The intermediate products in different stages during the degradation of MB are analyzed.

36 MATERIALS SCIENCE↗

Understanding Platinum Ionomer Interface Properties of Polymer Electrolyte Fuel Cells

A well-designed cathode catalyst layer with optimal ionomer distribution is critical to minimizing amount of Platinum (Pt) content in polymer electrolyte fuel cells (PEFCs). The impact of Pt loading, ionomer content and carbon support types on the catalyst/ionomer interface were also investigated at dry and wet conditions. Higher Pt loadings resulted in higher double layer capacity (C dl ) and similar electrochemical surface area (ECSA) due to well dispersed ionic phase material. Higher ionomer content resulted in higher ionic conductivity but also showed similar SO 3 − group coverage. High surface area (HSA) carbon support had larger ECSA and C dl at both dry and wet conditions, as less agglomerated Pt was well dispersed in the meso-pores of the support. Lower SO 3 − group coverages were observed for HSA carbon than for Vulcan carbon due to Pt particles being buried within the porous HSA carbon support. The effect of cell conditioning and voltage recovery on the PEFC cathode catalyst layer was shown to have minimal impact on SO 3 − group coverage despite a decrease in C dl and ECSA due to the size increase of Pt particles. At dry condition, a significant increases in SO 3 − group coverage were observed for all MEAs due to higher adsorptivity of ionomer in dry conditions.

25 ENERGY STORAGE↗

AuPd Nanoicosahedra: Atomic-Level Surface Modulation for Optimization of Electrocatalytic and Photocatalytic Energy Conversion

Modulation of bimetallic nanocatalysts with atomic precision would allow for significant increases in catalyst activity through the optimization of heteroatomic interplay. In practice, this level of control over homogeneously turning the heteroatomic states in the surface regions of catalysts remains a great challenge for practical applications requiring mass production. In this work, a one-step aqueous strategy for preparation of AuPd nanoicosahedra core–shell structures has been developed. By turning the molar ratio of Au and Pd precursors, the nanoicosahedra could be made with uniform core composition (Pd ~20%) and largely flexible surface compositions (Pd: 20–70%). Under model reactions of electrochemical ethanol oxidation (EOR) and 4-nitrophenol (4-NP) reduction, the Au 55 Pd 45 surface displayed superior activities. Here, x-ray absorption spectroscopy revealed that AuPd nanoicosahedra with Pd-poor surfaces (Au 79 Pd 21 and Au 60 Pd 40 ) maintain Au-like electronic structures while those with Pd-rich surfaces are more Pd-like. The Au 55 Pd 45 surface struck a delicate balance between the two extremes, leading to the optimal Au–Pd interplay for catalytic performance. Overall, the development of a one-step aqueous strategy for atomic-level control over bimetallic nanoparticle surface states is an important milestone for future advances in catalysis. Our findings in atomic-scale catalyst design will bring deep insights into the fields of nanosynthesis and heterogeneous catalysis, which will be beneficial for further scientific breakthroughs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Key Single-Atom Electrocatalysis in Metal-Organic Framework (MOF)-Derived Bifunctional Catalysts

Metal-organic framework (MOF)-derived materials have attracted increasing interest and show promising catalytic performances in many fields. Intensive efforts have been focused on the structure design and metal-site integration in MOF-derived catalysts. However, the key catalytic processes related with the metal sites in MOF-derived catalysts that dominate the electrocatalytic performance still remain obscure. Herein, we show a neglected but critical issue in the pyrolytic synthesis of MOF-derived catalysts: the coupled evolution of dual sites, that is, metallic sites and single-atom metal sites. The identification of active sites of single-atom sites from the visible particles has been elucidated through the combined X-ray spectroscopic, electron microscopic, and electrochemical studies. Interestingly, after a total removal of metallic cobalt sites, catalysts with purified single-atom metal sites show no faltering activity for either the oxygen reduction reaction (ORR) or hydrogen evolution reaction (HER), while significantly enhanced ORR selectivity is achieved; this reveals the dominant activity and selectivity contribution from single-atom electrocatalysis. The insight of the coupled evolution of dual sites and the as-demonstrated dual-site decoupling strategies open up a new routine for the design and synthesis of MOF-derived catalysts with the optimized single-atom electrocatalysis towards various electrochemical reactions.

electrocatalysis↗

Effect of Solvent on the Local Structure, Dynamics, and Vibrational Density of States in Sn-BEA Zeolite

Lewis acid zeolites are attractive catalysts for epoxidation and biomass valorization, as they are highly active and selective in the liquid phase and can operate at or near ambient conditions. While a rich experimental literature exists on liquid-phase Lewis acid zeolite catalysis, our understanding of the molecular organization and solvent dynamics in the vicinity of Lewis acid sites with differing metal site speciation remains limited. In this work, we investigate the molecular coordination and diffusion of two common solvents (methanol and water) around the closed and open Sn-BEA zeolite active sites using molecular dynamics simulations with a machine-learned interatomic potential trained on ab initio molecular dynamics trajectories. Molecular dynamics simulations reveal that introducing active sites significantly enhances local order in the first and second solvation shells compared to the pure silica case. For methanol, both closed and open active sites are singly coordinated, while more than two water molecules coordinate the open site. In contrast to methanol, we observed that water molecules dissociate, leading to the formation of additional Sn-OH and silanol groups away from the active site. The diffusion coefficients of water and methanol are functions of the solvent population in the pore. Here, our work provides insights into how active site speciation in Lewis acid zeolites affects solvent coordination, diffusion, and vibrational signature. This information is foundational for catalyst design and optimization of liquid-phase catalytic processes in zeolites. It also demonstrates the suitability of machine-learned interatomic potentials for modeling reactive systems, enabling sufficiently long trajectories for appropriate statistical averaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗