Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Deep diode arrays for X-ray detection

Temperature gradient zone melting process was used to form p-n junctions in bulk of high purity silicon wafers. These diodes were patterned to form arrays for X-ray spectrometers. The whole fabrication processes for these X-ray detectors are reviewed in detail. The p-n junctions were evaluated by (1) the dark diode I-V measurements, (2) the diode C sub I - V measurements, and (3) the MOS C-V measurements. The results showed that these junctions were linearly graded in charge distribution with low reverse bias leakage current flowing through them (few nA at -10 volts). The X-ray detection experiments showed that an FWHM of 500 eV was obtained from these diodes with a small bias of just -5 volts (for X-ray source Fe55). A theoretical model was proposed to explain the extra peaks found in the energy spectra and a very interesting point - cross talk effect was pointed out. This might be a solution to the problem of making really high resolution X-ray spectrometers.

Zemel, J. N.↗

Two-frequency RF fields induced multipactor in coaxial transmission lines

This study presents a comprehensive investigation of two-surface multipactor discharge in coaxial transmission lines under two-frequency radio frequency (RF) excitation using one-dimensional Monte Carlo simulations validated against three-dimensional particle-in-cell simulations and experimental data. The results show that introducing a second carrier mode can suppress multipactor by reshaping and shrinking the susceptibility region, with the extent and location of suppression strongly dependent on the device's aspect ratio and the relative phase of the second carrier mode. Distinct suppression patterns are observed across different fd regimes, while in some cases, susceptibility expansion also occurs under two-frequency operation. A key outcome is the identification and delineation of pure and mixed multipactor modes in coaxial geometry, where analytical mode boundaries are not readily available. Unlike planar geometries, pure-mode regions in coaxial systems overlap with mixed-mode domains, complicating mode identification. Additionally, image charge forces are found to have negligible influence on susceptibility thresholds but strongly affect electron growth rates. These findings offer valuable insights into the use of waveform engineering for controlling multipactor in high-power RF systems.

43 PARTICLE ACCELERATORS↗

An auroral effect on the fair weather electric field

Evidence is presented for coupling between the upper and lower atmosphere by means of the shorting out of the vertical mesospheric electric field by auroral radiation, which causes a transfer of mesospheric potential to the lower atmosphere. Measurements were made by an electric field antenna which was part of a parachute-borne payload, launched by rocket from near Fairbanks, Alaska. Data obtained from quiet time observations indicate the normal low altitude electric field pattern, with a greater field at high altitudes, while observations at disturbed times show a small field at high altitudes and a greater field at low altitudes. Means for observing this effect at lower latitudes are also suggested. While the data obtained support the proposed mechanism, it is noted that other mechanisms, such as direct modulation by large amounts of solar cosmic rays and aurorally produced charge separation, may also be important.

Hale, L. C.↗

Auroral arc electrodynamic parameters measured by AE-C and the Chatanika radar

Auroral arc electrodynamic parameters are studied using coordinated measurements between the AE-C satellite and the Chatanika radar. On January 4, 1978, the spacecraft twice crossed an east-west aligned auroral arc at widely spaced longitudes, spanning more than 3 hours in local time. The Chatanika radar was scanning in elevation at a magnetic longitude equidistant from the two AE-C crossings. The electric field pattern around this arc was remarkably similar at the three longitudes. Equatorward of the arc the north-south field was very intense (greater than approximately 60 mV/m), whereas poleward of the arc it was small (approximately 10 mV/m). The east-west field was small and almost constant across the arc. The same arc was observed by the radar for about 1 hour, and this electric field pattern did not change, even though the arc location, intensity, and width changed substantially. For a given electric field the AE-C measured ion temperature was substantially different during each of the arc crossings. This dissimilarity is attributed to differences in the F region neutral wind at the two longitudes. It is shown that the electric field variations are consistent with the existence of polarization charges within the arc, even though the electric field remained small poleward of the arc.

Beaujardiere, O. D. L.↗

Effects of Internal and External Hydrogen on Inconel 718

Internal hydrogen embrittlement (IHE) and hydrogen environment embrittlement (HEE) tensile and bend crack growth tests were performed on Inconel 718. For the IHE tests, the specimens were precharged to approximately 90 ppm hydrogen by exposure to 34.5 MPa H2 at 650 C. The HEE tests were performed in 34.5 MPa H2. Parameters evaluated were test temperature, strain rate for smooth and notch specimen geometries. The strain rate effect was very significant at ambient temperature for both IHE and HEE and decreased with increasing temperatures. For IHE, the strain rate effect was neglible at 260'C, and for HEE the strain rate effect was neglible at 400 C. At low temperatures, IHE was more severe than HEE, and at high temperatures HEE was more severe than IHE with a cross over temperature about 350 C. At 350 C, the equilibrium hydrogen concentration in Inconel 718 is about 50% lower than the hydrogen content of the precharged IHE specimens. Dislocation hydrogen sweeping of surface absorbed hydrogen was the likely transport mechanism for increasing the hydrogen concentration in the HEE tests sufficiently to produce the same degree of embrittlement as that of the more highly hydrogen charged IHE specimens. The main IHE fracture characteristic was formation of large, brittle flat facets, which decreased with increasing test temperature. The IHE fracture matrix surrounding the large facets ranged between brittle fine faceted to microvoid ductility depending upon strain rate, specimen geometry as well as temperature. The HEE fractures were characteristically fine featured, transgranular and brittle with a significant portion forming a "saw tooth" crystallographic pattern. Both IHE and HEE fractures were predominantly along the {1 1 1) slip and twin boundaries. With respect to embrittlement mechanism, it was postulated that dislocation hydrogen sweeping and hydrogen enhanced localized plasticity were active in HEE and IHE for concentrating hydrogen along (1 1 1) slip and twin planes. Final brittle failure occurred by hydrogen induced planer decohesion.

Walter, R. J.↗

Tethered from the Head and from the Tail: The Structure of Hydroxyl-Functionalized Ionic Liquids

Ionic liquids with special functionalities are synthesized with the specific purpose of creating new patterns of interaction in the condensed phase. This Letter discusses the case of alcohol-functionalized ILs, the so-called HFILs, which are part of the larger cohort of task-specific ionic liquids. We find that this small chemical modification can cause massive changes in the liquid landscape when the cationic tails are longer. For prototypical ionic liquids, larger alkyl tails act as separators of charge networks, but in the case of HFILs these become physical charge network linkers. The OH functionality adds a large repertoire of interactions and correlations that were mostly unavailable to traditional ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Electrodeposition in 3D Porous Architectures for Solid-State Li-Metal Batteries

Li-metal storage in three-dimensional (3D) electrodes is considered a potential dendrite-mitigation strategy. The large surface area and high porosity of these electrodes result in reduced local Li-plating current densities. The porous topology provides a scaffold for Li-deposition and stripping, maintaining both mechanical integrity and Li accessibility. The goal of this study is to understand how characteristics, such as geometry and material properties, affect the current distribution and deposition pattern. To this end, we developed a computational method to track material growth driven by electrodeposition within a complex geometry. This method ensures that the finite-element discretization remains conforming to the moving boundary while preserving an adequate mesh quality, and thus maintains solution accuracy. Using this new computational tool, we analyze the conditions under which porous anode architectures effectively expand the surface area of the charge-transfer interface, and self-regulate current density and dendrite growth.

3D electrode architectures↗

Charge neutralization as studied experimentally and theoretically

Problems regarding an isolated sphere which emits negative charge are considered. Such a sphere could charge up to large potentials which would inhibit the electron beam from leaving the vicinity of the body. In order to avoid charging to high potentials, a vehicle must attract a return current equal to the emitted current. The present investigation is concerned with theoretical models of some processes believed to be important for the vehicle neutralization problem under various conditions. Attention is given to general time-scale considerations, the low-altitude regime, the high-altitude regime, vehicle-induced discharge, and beam-plasma discharge. The general pattern which emeres as a result of measurements is that below altitudes of approximately 125 + or - 5 km the vehicle potential rarely rises more than several tens of volts.

Linson, L. M.↗

Wide Field-of-View Soft X-Ray Imaging for Solar Wind-Magnetosphere Interactions

Soft X-ray imagers can be used to study the mesoscale and macroscale density structures that occur whenever and wherever the solar wind encounters neutral atoms at comets, the Moon, and both magnetized and unmagnetized planets. Charge exchange between high charge state solar wind ions and exospheric neutrals results in the isotropic emission of soft X-ray photons with energies from 0.1 to 2.0 keV. At Earth, this process occurs primarily within the magnetosheath and cusps. Through providing a global view, wide field-of-view imaging can determine the significance of the various proposed solar wind-magnetosphere interaction mechanisms by evaluating their global extent and occurrence patterns. A summary of wide field-of-view (several to tens of degrees) soft X-ray imaging is provided including slumped micropore microchannel reflectors, simulated images, and recent flight results.

xray↗

Revealing rotational symmetry breaking charge density wave order in the kagome superconductor (Rb, K)⁢V 3 ⁢Sb 5 by ultrafast pump-probe experiments

The recently discovered Kagome superconductor 𝐴⁢V 3 ⁢Sb 5 (where 𝐴 refers to K, Rb, Cs) has stimulated widespread research interest due to its interplay of nontrivial topology and unconventional correlated physics including charge-density waves (CDW) and superconductivity. The essential prerequisite to understanding the microscopic mechanisms of this complex electronic landscape is to unveil the configuration and symmetry of the charge-density wave order. As to now, little consensus has been made on what symmetry is broken. Herein, we clarify the microscopic structure and symmetry breaking of the CDW phase in RbV 3 ⁢Sb 5 and KV 3 ⁢Sb 5 by ultrafast time-resolved reflectivity. Our approach is based on extracting coherent phonon spectra induced by three-dimensional CDW and comparing them to calculated phonon frequencies via density-functional theory. The combination of these experimental results and calculations provides compelling evidence that the CDW structure of both compounds prevailing up to 𝑇 CDW is the 2 × 2 × 2 staggered inverse Star-of-David pattern with interlayer 𝜋 phase shift, in which the sixfold rotational symmetry is broken. Finally, these observations thus corroborate sixfold rotational symmetry breaking throughout the CDW phase of RbV 3 ⁢Sb 5 and KV 3⁢ Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composite x-ray image assembly for large-field digital mammography with one- and two-dimensional positioning of a focal plane array

To demonstrate the feasibility of a novel large-field digital mammography technique, a 1024 x 1024 pixel Loral charge-coupled device (CCD) focal plane array (FPA) was positioned in a mammographic field with one- and two-dimensional scan sequences to obtain 950 x 1800 pixel and 3600 x 3600 pixel composite images, respectively. These experiments verify that precise positioning of FPAs produced seamless composites and that the CCD mosaic concept has potential for high-resolution, large-field imaging. The proposed CCD mosaic concept resembles a checkerboard pattern with spacing left between the CCDs for the driver and readout electronics. To obtain a complete x-ray image, the mosaic must be repositioned four times, with an x-ray exposure at each position. To reduce the patient dose, a lead shield with appropriately patterned holes is placed between the x-ray source and the patient. The high-precision motorized translation stages and the fiber-coupled-scintillating-screen-CCD sensor assembly were placed in the position usually occupied by the film cassette. Because of the high mechanical precision, seamless composites were constructed from the subimages. This paper discusses the positioning, image alignment procedure, and composite image results. The paper only addresses the formation of a seamless composite image from subimages and will not consider the effects of the lead shield, multiple CCDs, or the speed of motion.

Mammography/methods/statistics & numerical data↗

Solid-State Side-Chain Functionalization of Conjugated Polymers for Expanded Chemical and Functional Versatility

Conjugated polymers that integrate diverse chemical functionalities with high electronic performance are essential for advanced organic electronic, optoelectronic, and biointerfaced technologies. Achieving such multifunctionality typically requires grafting functional units onto polymer side chains. However, conventional solution-phase approaches remain constrained by solubility limitations, side-chain-induced packing disruptions, and challenges in preserving charge transport. Here, we introduce a solid-state side-chain functionalization strategy that exploits a swellable polar side-chain architecture and azide–alkyne click chemistry to enable efficient molecular diffusion and reaction throughout predeposited polymer thin films. This approach substantially broadens the chemical compatibility of graftable units and mitigates the adverse effects on the electrical property. Moreover, the method supports spatially selective functionalization within a continuous film, enabling the patterned incorporation of chemically distinct groups to produce spatially defined optical properties. Here, this solid-state strategy thus provides a versatile platform for constructing conjugated polymers with expanded chemical versatility, preserved electronic performance, and programmable spatial functionality.

Conjugated polymers↗

Directing Charge Carriers and Ferroelectric Domains at Lateral Interfaces in van der Waals Heterostructures

Emergent phenomena in traditional ferroelectrics are frequently observed at heterointerfaces. Accessing such functionalities in van der Waals ferroelectrics requires the formation of layered heterostructures, either vertically stacked (similar to oxide ferroelectrics) or laterally stitched (without equivalent in 3D-crystals). Here, we investigate lateral heterostructures of the ferroelectric van der Waals semiconductors SnSe and SnS. A two-step process produces ultrathin crystals comprising an SnSe core laterally joined to an SnS edge-band, as confirmed by Raman spectroscopy, transmission electron microscopy (TEM) imaging, and electron diffraction. TEM shows a moiré pattern across the SnSe core due to coverage by an ultrathin SnS layer. The ability of the lateral interface (IF) to direct excited carriers, probed by cathodoluminescence, shows electron transfer over 560 nm diffusion length from the SnS edge-band. Large, thin flakes supporting ferroelectricity allow investigating domains and domain wall interactions in uniform crystals and lateral heterostructures. Polarized optical microscopy of sub-20 nm flakes consistently shows ⟨110⟩ oriented stripe domains with mirror-twin domain walls. Heterostructures adopt two domain configurations, with domains either constrained to the SnSe core or propagating across the entire SnSe–SnS flakes. Furthermore, the combined results demonstrate multifunctional van der Waals heterostructures with high-quality IFs presenting extraordinary opportunities for manipulating carrier flows and ferroelectric domain patterns.

2D ferroelectrics↗

Trajectory Traces of Charged Particles in the Magnetosphere

The characteristic enhancements of ring current particles with energies of about 1 to 100 keV, associated with magnetospheric substorms, were observed by Explorer 45 around the plasmapause in the afternoon to midnight region, and showed the characteristic structure called a 'nose' in the proton spectrograms. The motion of these particles in the equatorial magnetosphere, under a recently proposed convection electric field and a dipole magnetic field is described. Approximate equations of a bounce period, a second adiabatic invariant, and a bounce-average azimuthal velocity are given with inaccuracies less than about 0.001 for all pitch angles. The complete set of flow patterns of 90 deg pitch angle particles is also presented by means of stagnation lines through which radial drifts and/or azimuthal drifts change their directions. The particle tracings in the magnetosphere give a basic concept to explain the observed nose characteristics.

Ejiri, M.↗

Time-Resolved Neutron Imaging for Hydrogen Uptake in Subsurface Lithologies

Geologic hydrogen production and underground storage are increasingly important for meeting rising energy demands while providing clean-combustion advantages. However, hydrogen’s high diffusivity and propensity for leakage through porous media necessitate direct evaluation of its transport behavior in subsurface materials. Whereas X-ray microcomputed tomography (μCT) studies often employ contrast agents or surrogate gases, this study leverages neutron transmission radiography/CT to observe hydrogen migration in situ. This work represents the first demonstration of real-time neutron radiography of hydrogen migration in reservoir and caprock lithologies. Cylindrical cores of Indiana limestone, Amherst Gray sandstone, and Tumey shale were subjected to constant-pressure hydrogen charging and scanned in real time using high-resolution neutron radiography. Results indicate immediate hydrogen infiltration in sandstone and limestone, with homogeneous distribution detected throughout their pore structure. In contrast, hydrogen remained largely absent from fine-grained shale under the same pressure, except in an apparently localized fracture zone, where neutron signatures confirmed the presence of hydrogen. Subsequent neutron CT of the sandstone sample, using image subtraction against an uncharged reference, corroborated hydrogen distribution patterns. Even under lowpressure, single-phase conditions, distinct neutron imaging signatures of hydrogen were achieved. These preliminary findings underscore the potential of neutron imaging for advancing subsurface hydrogen migration research.

08 HYDROGEN↗

Towards dislocation-driven quantum interconnects

A central problem in the deployment of quantum technologies is the realization of robust architectures for quantum interconnects. We propose to engineer interconnects in semiconductors and insulators by patterning spin qubits at dislocations, thus forming quasi one-dimensional lines of entangled point defects. To gain insight into the feasibility and control of dislocation-driven interconnects, we investigate the optical cycle and coherence properties of nitrogen-vacancy (NV) centers in diamond, in proximity of dislocations, using a combination of advanced first-principles calculations. We show that one can engineer spin defects with properties similar to those of their bulk counterparts, including charge stability and a favorable optical cycle, and that NV centers close to dislocations have much improved coherence properties. Finally, we predict optically detected magnetic resonance spectra that may facilitate the experimental identification of specific defect configurations. Our results provide a theoretical foundation for the engineering of one-dimensional arrays of spin defects in the solid state.

Materials science↗

Grain disruption in interstellar hydromagnetic shocks

The observed abundance variations of Ca, Fe, Si, and Ti in intermediate-velocity interstellar gas suggest that grains have been disrupted in clouds with velocities as low as 20 to 50 km/s. A simplified hydromagnetic shock model for such clouds is described; the dynamical equations for charged grains in the postshock region are derived, including the collisional drag and 'betatron-acceleration' effect of a magnetic-field gradient; and the fraction of grains destroyed in evaporative collisions with other grains is calculated. It is found that for shocks of 20 to 50 km/s in which the fractional H-ionization remains low, 3-10% of the grain material may be destroyed - sufficient to explain in part the heavy-element depletion pattern in intermediate velocity clouds and the well-known correlation of N(Ca II)/N(Na I) with cloud velocity.

Shull, J. M.↗

Low power, compact charge coupled device signal processing system

A variety of charged coupled devices (CCDs) for performing programmable correlation for preprocessing environmental sensor data preparatory to its transmission to the ground were developed. A total of two separate ICs were developed and a third was evaluated. The first IC was a CCD chirp z transform IC capable of performing a 32 point DFT at frequencies to 1 MHz. All on chip circuitry operated as designed with the exception of the limited dynamic range caused by a fixed pattern noise due to interactions between the digital and analog circuits. The second IC developed was a 64 stage CCD analog/analog correlator for performing time domain correlation. Multiplier errors were found to be less than 1 percent at designed signal levels and less than 0.3 percent at the measured smaller levels. A prototype IC for performing time domain correlation was also evaluated.

Bosshart, P. W.↗