Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Synthesis of zeolite from Italian coal fly ash: Differences in crystallization temperature using seawater instead of distilled water

In this study Italian coal fly ash was converted into several types of zeolite in laboratory experiments with temperatures of crystallization ranging from 35 up to 90 deg. C. Distilled and seawater were used during the hydrothermal synthesis process in separate experiments, after a pre-treatment fusion with NaOH. The results indicate that zeolites could be formed from different kind of Italian coal fly ash at low temperature of crystallization using both distilled and seawater. SEM data and the powder patterns of X-ray diffraction analysis show that faujasite, zeolite ZK-5 and sodalite were synthesized when using both distilled and seawater; zeolite A crystallized only using distilled water. In particular the experiments indicate that the synthesis of zeolite X and zeolite ZK-5 takes place at lower temperatures when using seawater (35 and 45 deg. C, respectively). The formation of sodalite is always competitive with zeolite X which shows a metastable behaviour at higher temperatures (70-90 deg. C). The chemical composition of the fly ash source could be responsible of the differences on the starting time of synthesized zeolite with distilled water, in any case our data show that the formation of specific zeolites takes place always at lower temperatures when using seawater.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Phase separation and exchange biasing in the ferromagnetic IV-VI semiconductor Ge{sub 1-x}Mn{sub x}Te

Ferromagnetic Ge{sub 1-x}Mn{sub x}Te grown by molecular beam epitaxy with Mn content of x{sub Mn}approx =0.5 is shown to exhibit a strong tendency for phase separation. At higher growth temperatures apart from the cubic Ge{sub 0.5}Mn{sub 0.5}Te, a hexagonal MnTe and a rhombohedral distorted Ge{sub 0.83}Mn{sub 0.17}Te phase is formed. This coexistence of antiferromagnetic MnTe and ferromagnetic Ge{sub 0.5}Mn{sub 0.5}Te results in magnetic exchange-bias effects.

36 MATERIALS SCIENCE↗

Enhanced Field Emission From The Gold- Polyaniline (Au-PANI) Nanocomposite

The gold-polyaniline nanocomposite was synthesized by electrochemical route in two steps. In the first step polyaniline film was deposited by cyclic voltammetry on the ITO coated glass substrate, and then synthesis of gold-polyaniline nanocomposite via chronoamperometry. The synthesized gold-polyaniline nanocomposite film was characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), Ultra-violet spectroscopy (UV-vis) and Fourier Transform Infrared Spectrometry (FTIR). The SEM analysis shows well adherent gold nanoparticles on the surface of polyaniline nanofibers. The XRD and UV-Vis spectra indicate formation of gold nanoparticles. From the field emission studies, the value of the turn on field, corresponding to 1 nA emission current, is found to be 0.65 V/{mu}m and emission current density of 1 {mu}A/cm{sup 2} has been drawn at an applied field of 1.1 V/{mu}m. These values are observed to be superior than the reported ones. The field emission current stability investigated at 1 {mu}A over duration of more than four hours is found to be good. The observed field emission characteristics suggest the gold polyaniline nanocomposite as promising material for field emission based applications.

36 MATERIALS SCIENCE↗

Effect Of EDTA On Luminescence Property Of Eu{sup +3} Doped YPO{sub 4} Nanoparticles

Nanoparticles of Eu{sup 3+} doped YPO{sub 4} have been prepared using ethylene glycol (EG). Ethylene diamine tetra acetic acid (EDTA) is used as a complexing agent. X-ray diffraction results show that the nanoparticles are crystalline in tetragonal structure. Based on William-Hall relation, the effective crystallite size and strain developed in lattice are found to be 28 nm and 0.002, respectively. With the addition of EDTA, there is a slight shift towards the lower wavelength in emission peaks. Asymmetric ratio of electric to magnetic dipole transition intensities are found to decrease with addition of EDTA. Emission intensity decreases with EDTA because of decrease of particle size as well as decrease of number of Eu{sup 3+} activators per unit volume. These materials are dispersible in water, which may have potential biological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Grinding Wear Behaviour of Stepped Austempered Ductile Iron as Media Material During Comminution of Iron Ore in Ball Mills

An attempt has been made to evaluate the suitability of austempered ductile iron (ADI) as media material for grinding iron ore in a ball mill. Spheroidal graphite (S.G) iron balls are austenitised at 900 deg. C for 60 minutes and given stepped austempering treatment at 280 deg. C for 30 minutes and 60 minutes followed by 380 deg. C for 60 minutes in each case. These materials are characterised by measuring hardness, analysing X-ray diffraction (X-RD), studying microstructure using optical and scanning electron microscope (SEM). Grinding wear behaviour of these materials was assessed for wear loss in wet condition at different pH value of the mineral slurry and found that the wear rate of grinding media material decreases with increase in pH of the slurry. The wear resistance of ADI balls were compared with forged En31 steel balls and found that the stepped austempered ductile iron is superior to forged En31 steel balls.

36 MATERIALS SCIENCE↗

Low Temperature, Self-nucleated Growth of Indium Tin Oxide Nanostructures by Pulsed Laser Deposition in Argon

Indium tin oxide (ITO) nanostructures were successfully deposited on glass substrate by pulsed laser ablation in argon gas at 250 deg. C. Microstructural changes were observed in the argon gas pressure between 30 to 50 mTorr. The as-grown, nanostructured ITO exhibit In{sub 2}O{sub 3} bixbyite structure orientated at <111> direction. At the initial stage of growth, there was a large number of nucleation sites detected which eventually evolved into needle-like branches. The presence of spheres at the tip of these branches indicates that these nanostructured ITO were likely governed by vapor-liquid-solid (VLS) growth mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visible Luminescence from Au Nanoparticles Stabilized with Aromatic Thiols

Photoemission in the visible range is reported from Au nanoparticles stabilized with two different organic thiols. The efficiency and wavelength of the emissions are found to be different for the different capping agents. The size of the particles was estimated from TEM and XRD measurements. The observed luminescence may arise from interband electronic transitions between the filled 5d{sup 10} and 6(sp){sup 1} conduction band modified by a metal-ligand charge transfer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of historical metal objects using Laser Induced Breakdown Spectroscopy (LIBS) technique

Analysis of metal objects is a necessary step for establishing an appropriate conservation treatment of an object or to follow up the application's result of the suggested treatments. The main considerations on selecting a method that can be used in investigation and analysis of metal objects are based on the diagnostic power, representative sampling, reproducibility, destructive nature/invasiveness of analysis and accessibility to the appropriate instrument. This study aims at evaluating the usefulness of the use of Laser Induced Breakdown Spectroscopy (LIBS) Technique for analysis of historical metal objects. In this study various historical metal objects collected from different museums and excavations in Egypt were investigated using (LIBS) technique. For evaluating usefulness of the suggested analytical protocol of this technique, the same investigated metal objects were investigated by other methods such as Scanning Electron Microscope with energy-dispersive x-ray analyzer (SEM-EDX) and X-ray Diffraction (XRD). This study confirms that Laser Induced Breakdown Spectroscopy (LIBS) Technique is considered very useful technique that can be used safely for investigating historical metal objects. LIBS analysis can quickly provide information on the qualitative and semi-quantitative elemental content of different metal objects and their characterization and classification. It is practically non-destructive technique with the critical advantage of being applicable in situ, thereby avoiding sampling and sample preparations. It is can be dependable, satisfactory and effective method for low cost study of archaeological and historical metals. But we have to take into consideration that the corrosion of metal leads to material alteration and possible loss of certain metals in the form of soluble salts. Certain corrosion products are known to leach out of the object and therefore, their low content does not necessarily reflect the composition of the metal at the time of the object manufacture. Another point should be taken into consideration that the heterogeneity of a metal alloy object that often result from poor mixing of the different metal alloy composition.There is a necessity to carry out further research to investigate and determine the most appropriate and effective approaches and methods for conservation of these metal objects.

36 MATERIALS SCIENCE↗

Anisotropic charge density wave in layered 1 T - TiS e 2

We present a three-dimensional study on the anisotropy of the charge density wave (CDW) in 1T-TiSe 2 , by means of in situ atomically resolved electron microscopy at cryogenic temperatures in both reciprocal and real spaces. Using coherent nanoelectron diffraction, we observed short-range coherence of the in-plane CDW component while the long-range coherence of out-of-plane CDW component remains intact. An in-plane CDW coherence length of ~10 nm and an out-of-plane CDW coherence length of 17.5 nm, as a lower bound, were determined. The electron modulation was observed using electron energy-loss spectroscopy and verified by an orbital-projected density of states. Our integrated approach reveals anisotropic CDW domains at the nanoscale, and illustrates electron modulation-induced symmetry breaking of a two-dimensional material in three dimensions, offering an opportunity to study the effect of reduced dimensionality in strongly correlated systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature

The chemical and mechanical stability of slag activated with two different concentrations of sodium sulfate (Na{sub 2}SO{sub 4}) after exposure to elevated temperatures ranging from 200 to 800 Degree-Sign C with an increment of 200 Degree-Sign C has been examined. Compressive strengths and pH of the hardened pastes before and after the exposure were determined. The various decomposition phases formed were identified using X-ray diffraction, thermogravimetric analysis and scanning electron microscopy. The results indicated that Na{sub 2}SO{sub 4} activated slag has a better resistance to the degradation caused by exposure to elevated temperature up to 600 Degree-Sign C than Portland cement system as its relative strengths are superior. The finer slag and higher Na{sub 2}SO{sub 4} concentration gave better temperature resistance. Whilst the pH of the hardened pastes decreased with an increase in temperature, it still maintained a sufficiently high pH for the protection of reinforcing bar against corrosion.

36 MATERIALS SCIENCE↗

On the magnetic structure of DyNiO{sub 3}

The crystallographic structure of DyNiO{sub 3} has been investigated at T=200, 100, and 2 K from high-resolution neutron powder diffraction (NPD) data. We show that the structure is monoclinic, space group P2{sub 1}/n, from the metal-insulator transition temperature at T{sub MI}=564 K down to 2 K. The Ni atoms occupy two different sites 2d (Ni1) and 2c (Ni2), whose valences, estimated from bond-valence consideration, are +2.43(1) and +3.44(1) at 2 K, respectively. This is interpreted as the result of a partial charge disproportionation of the type 2Ni{sup 3+}->Ni1{sup (3-{delta})+}+Ni2{sup (3+{delta})+}, with {delta}{approx}0.55 at T=2 K. The magnetic structure has been studied from a NPD pattern at T=2 K, well below the establishment of the antiferromagnetic (AFM) ordering at T{sub N}=154 K, as well as from sequential data collected from 16 K down to 2 K. The magnetic order is defined by the propagation vector k=(1/2,0,1/2). Two possible magnetic structures are compatible with the magnetic intensities. In the second solution both Ni sublattices participate in the magnetic order, as well as Dy since it corresponds to a total disproportionation of Ni{sup 3+} to Ni{sup 2+} and Ni{sup 4+}. In the second solution both Ni sublattices participate in the magnetic order, as well as Dy. The magnetic moments for Ni1 and Ni2 atoms at T=2 K are 1.8 (2) and 0.8 (2) mu{sub B}, respectively. These values are also compatible with a partial charge disproportionation. Dy{sup 3+} ions exhibit long-range magnetic ordering below 8 K. An abrupt contraction of the unit-cell volume is observed at this temperature, due to a magnetoelastic coupling. The magnetic moment for Dy{sup 3+} at T=2 K is 7.87 (6) {mu}{sub B}. - Abstract: DyNiO{sub 3} undergoes a metal-insulator transition at T{sub MI}=564 K. Below T{sub MI} the structure is monoclinic with two different sites for the Ni atoms, which present a different valence. It is interpreted as a partial charge disproportionation. Below T{sub N}=154 K DyNiO{sub 3} orders with an antiferromagnetic structure defined by k=(1/2,0,1/2). Display Omitted

36 MATERIALS SCIENCE↗

Diffusion barrier properties of amorphous and nanocrystalline Ta films for Cu interconnects

In the present paper, the diffusion barrier properties of amorphous and nanocrystalline (NC) Ta films, and the interface microstructure of Ta/Cu were investigated as a function of annealing temperature. X-ray diffraction, scanning electron microscopy, cross-sectional transmission electron microscopy, and energy-dispersive spectrometer line scans were employed to study the microstructure evolution and diffusion behavior. It was found that an amorphous layer with a thickness of approx5 nm formed at the interface of NC Ta/Cu at 450 deg. C annealing, while the interface of amorphous-Ta/Cu was still abrupt. Moreover, amorphous-Ta film acts as an effective diffusion barrier up to temperatures of 650 deg. C, which is higher than that for NC-Ta film. The fast diffusion along grain boundaries inside NC-Ta films is suggested to be responsible for the main failure of NC-Ta film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Substrate orientation effects on the nucleation and growth of the M{sub n+1}AX{sub n} phase Ti{sub 2}AlC

The M{sub n+1}AX{sub n} (MAX) phases are ternary compounds comprising alternating layers of a transition metal carbide or nitride and a third ''A-group'' element. The effect of substrate orientation on the growth of Ti{sub 2}AlC MAX phase films was investigated by studying pulsed cathodic arc deposited samples grown on sapphire cut along the (0001), (1010), and (1102) crystallographic planes. Characterization of these samples was by x-ray diffraction, atomic force microscopy, and cross-sectional transmission electron microscopy. On the (1010) substrate, tilted (1018) growth of Ti{sub 2}AlC was found, such that the TiC octahedra of the MAX phase structure have the same orientation as a spontaneously formed epitaxial TiC sublayer, preserving the typical TiC-Ti{sub 2}AlC epitaxial relationship and confirming the importance of this relationship in determining MAX phase film orientation. An additional component of Ti{sub 2}AlC with tilted fiber texture was observed in this sample; tilted fiber texture, or axiotaxy, has not previously been seen in MAX phase films.

36 MATERIALS SCIENCE↗

Electron back scattered diffraction characterization of Sm(CoFeCuZr){sub z} magnets

In permanent magnets based on the Sm{sub 2}Co{sub 17} phase, the high coercivity depends on the presence of a complex microstructure, consisting of a Sm{sub 2}(Co,Fe){sub 17} cell phase, a cell boundary phase Sm(Co,Cu){sub 5}, and a Zr-rich platelet or lamellae phase. The aim of this work is to use electron back scatter diffraction (EBSD) in order to identify the different phases present in the isotropic magnets produced from cast alloys with the composition of Sm(Co{sub bal}Fe{sub 0.2}Cu{sub 0.1}Zr{sub x}){sub 8}, where x = 0, 0.02, or 0.06, and correlate them with the different phases observed in scanning electron microscopy (SEM) images. Due to the combination of careful surface preparation and high resolution microscopy, it was possible to observe the cellular structure characteristic of the 2:17 magnets in the SEM images. Until now, only transmission electron microscopy (TEM) had been used. Composition maps, energy dispersive spectroscopy (EDS), and EBSD measurements were used for doing the phase identification.

36 MATERIALS SCIENCE↗

Coherent growth of GaGdN layers with high Gd concentration on GaN(0001)

We report on the coherent growth of GaGdN with high Gd concentration on a GaN template using radio-frequency plasma-assisted molecular beam epitaxy under elevated growth conditions. X-ray diffraction and cross-sectional transmission electron microscopy observations revealed that at a growth temperature of 700 {sup Degree-Sign }C or below, GaGdN layers are coherently grown on the GaN templates without segregation of the secondary phases. As the GdN mole fraction x was increased to 0.08, the c-axis lattice parameter in Ga{sub 1-x}Gd{sub x}N increased linearly. Increasing the growth temperature to 750 {sup Degree-Sign }C causes lattice relaxation in GaGdN. All GaGdN samples exhibited photoluminescence emissions near the band-edge, a blue luminescence band emission, and a green luminescence band emission. The origin of the green luminescence band emission is discussed in relation to the compressive strain existing in the GaGdN layers coherently grown on GaN.

36 MATERIALS SCIENCE↗