Search NASA⌕ Search

SEARCH · Search NASA

Results for “computational reflection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Estimating Effects of Multipath Propagation on GPS Signals

Multipath Simulator Taking into Account Reflection and Diffraction (MUSTARD) is a computer program that simulates effects of multipath propagation on received Global Positioning System (GPS) signals. MUSTARD is a very efficient means of estimating multipath-induced position and phase errors as functions of time, given the positions and orientations of GPS satellites, the GPS receiver, and any structures near the receiver as functions of time. MUSTARD traces each signal from a GPS satellite to the receiver, accounting for all possible paths the signal can take, including all paths that include reflection and/or diffraction from surfaces of structures near the receiver and on the satellite. Reflection and diffraction are modeled by use of the geometrical theory of diffraction. The multipath signals are added to the direct signal after accounting for the gain of the receiving antenna. Then, in a simulation of a delay-lock tracking loop in the receiver, the multipath-induced range and phase errors as measured by the receiver are estimated. All of these computations are performed for both right circular polarization and left circular polarization of both the L1 (1.57542-GHz) and L2 (1.2276-GHz) GPS signals.

Byun, Sung↗
NASA NTRS1978

Solar spectral irradiance at ground level

Available quantitative data on solar total and spectral irradiance is examined in the context of utilization of solar irradiance for terrestrial applications of solar energy. A brief review is given on the extraterrestrial solar total and spectral irradiance values. Computed values of solar spectral irradiance at ground level for different air mass values and various levels of atmospheric pollution or turbidity are also presented. Wavelengths are given for computation of solar absorptance, transmittance and reflectance by the 100-selected-ordinate method and by the 50-selected-ordinate method from air mass two solar spectral irradiance for the four degrees of atmospheric pollution. Total solar spectral irradiance measured with a prism monochromator is examined to evaluate the direct solar spectral irradiance for a surface normal to the sun's rays and to compare the computed spectrum with the experimentally observed one.

Mecherikunnel, A. T.↗
NASA NTRS1976

Atmospheric modeling related to Thematic Mapper scan geometry

A simulation study was carried out to characterize atmospheric effects in LANDSAT-D Thematic Mapper data. In particular, the objective was to determine if any differences would result from using a linear vs. a conical scanning geometry. Insight also was gained about the overall effect of the atmosphere on Thematic Mapper signals, together with the effects of time of day. An added analysis was made of the geometric potential for direct specular reflections (sun glint). The ERIM multispectral system simulation model was used to compute inband Thematic Mapper radiances, taking into account sensor, atmospheric, and surface characteristics. Separate analyses were carried out for the thermal band and seven bands defined in the reflective spectral region. Reflective-region radiances were computed for 40 deg N, 0 deg, and 40 deg S latitudes; June, Mar., and Dec. days; and 9:30 and 11:00 AM solar times for both linear and conical scan modes. Also, accurate simulations of solar and viewing geometries throughout Thematic Mapper orbits were made. It is shown that the atmosphere plays an important role in determining Thematic Mapper radiances, with atmospheric path radiance being the major component of total radiances for short wavelengths and decreasing in importance as wavelength increases. Path radiance is shown to depend heavily on the direct radiation scattering angle and on haze content. Scan-angle-dependent variations were shown to be substantial, especially for the short-wavelength bands.

Malila, W. A.↗
NASA NTRS1976

Diffraction of a shock wave by a compression corner; regular and single Mach reflection

The two dimensional, time dependent Euler equations which govern the flow field resulting from the injection of a planar shock with a compression corner are solved with initial conditions that result in either regular reflection or single Mach reflection of the incident planar shock. The Euler equations which are hyperbolic are transformed to include the self similarity of the problem. A normalization procedure is employed to align the reflected shock and the Mach stem as computational boundaries to implement the shock fitting procedure. A special floating fitting scheme is developed in conjunction with the method of characteristics to fit the slip surface. The reflected shock, the Mach stem, and the slip surface are all treated as harp discontinuities, thus, resulting in a more accurate description of the inviscid flow field. The resulting numerical solutions are compared with available experimental data and existing first-order, shock-capturing numerical solutions.

Vijayashankar, V. S.↗
NASA NTRS1985

Engineering and programming manual: Two-dimensional kinetic reference computer program (TDK)

The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket thrust chamber performance prediction methodology. The development of a methodology that includes all aspects of rocket engine performance from analytical calculation to test measurements, that is physically accurate and consistent, and that serves as an industry and government reference is presented. Recent interest in rocket engines that operate at high expansion ratio, such as most Orbit Transfer Vehicle (OTV) engine designs, has required an extension of the analytical methods used by the TDK computer program. Thus, the version of TDK that is described in this manual is in many respects different from the 1973 version of the program. This new material reflects the new capabilities of the TDK computer program, the most important of which are described.

Nickerson, G. R.↗
NASA NTRS1975

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02-cm diameter nozzle with microphones at several heights and distances from the nozzle axis. Ground reflection effects are analyzed using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. The selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects is also discussed.

Miles, J. H.↗
NASA NTRS1975

Analysis of ground reflection of jet noise obtained with various microphone arrays over an asphalt surface

Ground reflection effects on the propagation of jet noise over an asphalt surface are discussed for data obtained using a 33.02 cm (13-in.) diameter nozzle with microphones at several heights and distances from the nozzle axis. Analysis of ground reflection effects is accomplished using the concept of a reflected signal transfer function which represents the influence of both the reflecting surface and the atmosphere on the propagation of the reflected signal in a mathematical model. The mathematical model used as a basis for the computer program was successful in significantly reducing the ground reflection effects. The range of values of the single complex number used to define the reflected signal transfer function was larger than expected when determined only by the asphalt surface. This may indicate that the atmosphere is affecting the propagation of the reflected signal more than the asphalt surface. Also discussed is the selective placement of the reinforcements and cancellations in the design of an experiment to minimize ground reflection effects.

Miles, J. H.↗
NASA NTRS2005

Characterization of Meta-Materials Using Computational Electromagnetic Methods

An efficient and powerful computational method is presented to synthesize a meta-material to specified electromagnetic properties. Using the periodicity of meta-materials, the Finite Element Methodology (FEM) is developed to estimate the reflection and transmission through the meta-material structure for a normal plane wave incidence. For efficient computations of the reflection and transmission over a wide band frequency range through a meta-material a Finite Difference Time Domain (FDTD) approach is also developed. Using the Nicholson-Ross method and the Genetic Algorithms, a robust procedure to extract electromagnetic properties of meta-material from the knowledge of its reflection and transmission coefficients is described. Few numerical examples are also presented to validate the present approach.

Deshpande, Manohar↗
NASA NTRS1973

The radiation balance of the earth-atmosphere system from Nimbus 3 radiation measurements

The radiation balance of the earth-atmosphere system and its components was computed from global measurements of radiation reflected and emitted from the earth to space. These measurements were made from the meteorological satellite Nimbus 3 during the periods from April 16 to August 15, 1969; October 3 to 17, 1969; and January 21 to February 3, 1970. Primarily the method of evaluation, its inherent assumptions, and possible error sources were discussed. Results are presented by various methods: (1) global, hemispherical, and zonal averages obtained from measurements in all semimonthly periods and (2) global maps of the absorbed solar radiation, the albedo, the outgoing longwave radiation, and the radiation balance obtained from measurements during semimonthly periods in each season (May 1 to 15, July 16 to 31, and October 3 to 17, 1969, and January 21 to February 3, 1970). Annual global averages of the albedo and of the outgoing longwave radiation were determined. These values balance to within 1 percent the annual global energy input by solar radiation that was computed for a solar constant.

Raschke, E.↗
NASA NTRS1980

VASCOMP 2. The V/STOL aircraft sizing and performance computer program. Volume 6: User's manual, revision 3

This report describes the use of the V/STOL Aircraft Sizing and Performance Computer Program (VASCOMP II). The program is useful in performing aircraft parametric studies in a quick and cost efficient manner. Problem formulation and data development were performed by the Boeing Vertol Company and reflects the present preliminary design technology. The computer program, written in FORTRAN IV, has a broad range of input parameters, to enable investigation of a wide variety of aircraft. User oriented features of the program include minimized input requirements, diagnostic capabilities, and various options for program flexibility.

Schoen, A. H.↗
NASA NTRS1971

Automatic Computer Mapping of Terrain

Computer processing of 17 wavelength bands of visible, reflective infrared, and thermal infrared scanner spectrometer data, and of three wavelength bands derived from color aerial film has resulted in successful automatic computer mapping of eight or more terrain classes in a Yellowstone National Park test site. The tests involved: (1) supervised and non-supervised computer programs; (2) special preprocessing of the scanner data to reduce computer processing time and cost, and improve the accuracy; and (3) studies of the effectiveness of the proposed Earth Resources Technology Satellite (ERTS) data channels in the automatic mapping of the same terrain, based on simulations, using the same set of scanner data. The following terrain classes have been mapped with greater than 80 percent accuracy in a 12-square-mile area with 1,800 feet of relief; (1) bedrock exposures, (2) vegetated rock rubble, (3) talus, (4) glacial kame meadow, (5) glacial till meadow, (6) forest, (7) bog, and (8) water. In addition, shadows of clouds and cliffs are depicted, but were greatly reduced by using preprocessing techniques.

Smedes, H. W.↗
NASA NTRS2001

A Moderate Resolution View of the Spectral Absorption of Clouds

Some of the first evidence of a cloud absorption anomaly came from retrievals of cloud droplet size using measured multispectral cloud reflectance and in situ microphysical measurements. It was found that spectra computed from the measured droplet size or, equivalently, effective radius inverted from the reflectance measurements disagreed in such a way that suggested there was more absorption in cloud than predicted by theory. During the past decade new evidence of a cloud absorption anomaly has emerged from broadband solar flux measurements from above and below clouds. Based on these findings new field campaigns were devised to specifically address this problem. The most recent of these, the Atmospheric Radiation Measurement (ARM) Enhanced Shortwave Experiment II (ARESEII), included measurements of upwelling and downwelling moderate resolution (10 nm) solar irradiance spectra from above and below cloud. During this talk we will briefly summarize the advantages and limitations of these spectrally resolved measurements compared to the more standard broadband flux. We will focus on cloudy atmosphere results from the ARESEII field study and compare them to theoretical spectra from three independent models.

Pilewskie, Peter↗
DOE OSTI2025

Defect Complexes in CrSBr Revealed Through Electron Microscopy and Deep Learning

Atomic defects underpin the properties of van der Waals materials, and their understanding is essential for advancing quantum and energy technologies. Scanning transmission electron microscopy is a powerful tool for defect identification in atomically thin materials, and extending it to multilayer and beam-sensitive materials would accelerate their exploration. Here, we establish a comprehensive defect library in a bilayer of the magnetic quasi-1D semiconductor CrSBr by combining atomic-resolution imaging, deep learning, and calculations. We apply a custom-developed machine learning work flow to detect, classify, and average point vacancy defects. This classification enables us to uncover several distinct Cr interstitial defect complexes, combined Cr and Br vacancy defect complexes, and lines of vacancy defects that extend over many unit cells. We show that their occurrence is in agreement with our computed structures and binding energy densities, reflecting the intriguing layer interlocked crystal structure of CrSBr. Our ab initio calculations show that the interstitial defect complexes give rise to highly localized electronic states. These states are of particular interest due to the reduced electronic dimensionality and magnetic properties of CrSBr and are, furthermore, predicted to be optically active. Our results broaden the scope of defect studies in challenging materials and reveal new defect types in bilayer CrSBr that can be extrapolated to the bulk and to over 20 materials belonging to the same FeOCl structural family.

deep learning↗
NASA NTRS1971

Multiple scattering of polarized light in planetary atmospheres. II - Sunlight reflected by terrestrial water clouds.

The intensity and polarization of sunlight reflected by terrestrial water clouds are computed with the doubling method. The calculations illustrate that this method can be effectively used in problems involving strongly anisotropic phase matrices. The method can, therefore, be used to derive information about planetary clouds, including those of the earth, from polarimetric observations. The results of the computations indicate that the polarization is more sensitive than the intensity to cloud microstructure, such as particle size and shape.

Hansen, J. E.↗
NASA NTRS1973

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. Multispectral reflectance signatures have been obtained from computer printouts from scene 1049-20505. Those signatures have been grouped for 13 dominant physical features in the Matanuska Susitna Valley area of Alaska. The derived signatures will be validated and tested by requesting another symbol-coded computer printout for the same area. It is expected that ERTS-1 imagery collected during late autumn and early spring will provide separations of signatures that are confounded in the 1049-20505 scene. Separating bogs and forests should be much improved when either snow covered or when grasses are brown. Photographs have been made of projections on the color additive viewer, each scene being projected with six different filter combinations. The products will be analyzed and those best suited used for producing color transparencies at a scale of 1:250,000 for overlaying on standard quadrangle maps. Color prints will be processed for use in the field. From digital MSS signatures derived to date, identification has been made of which bands are the most powerful for automated classification of dominant physical features. It has been found that separations among density ranges increase with longer wavelengths. Deriving MSS digital signatures has proven valuable to both digital and visual processing of ERTS-1 data.

Branton, C. I.↗
NASA NTRS1974

Coastal wetlands analysis from ERTS MSS digital data and field spectral measurements

Classification, delineation and evaluation of coastal wetlands can be made on the basis of major vegetative associations. To produce wetland maps, two vegetation-analysis look-up tables were developed for use in the ERTS ANALYSIS System. These look-up tables are based on Earth Resources Technology Satellite (ERTS) digital values in Multispectral Scanner (MSS) bands 4, 5, and 7 and were developed using seasonal spectral reflectance measurements from field observations. Computer-generated maps at an approximate scale of 1:20,000 were produced for the primary test site, Chincoteague Marsh, Virginia. There is a high degree of accuracy in the identification of wetland features and plant associations. The classification was also tested on other Atlantic coast salt marshes and a brackish marsh in the Chesapeake Bay.

Carter, V.↗
NASA NTRS1977

An improved Venus cloud model

An inhomogeneous cloud model for Venus is presented in which a (transparent) sulfuric acid aerosol extends above the tropopause, but an (absorbing) sulfur aerosol consisting of much larger particles does not. It is shown that the temperature dependence of the absorption spectrum of sulfur, combined with the lapse rate in the planet's atmosphere, can explain the color of Venus. A simple 'black-white' radiative-transfer model is developed, the spectral reflectance of the cloud model is computed for the 60-km level in Marov's (1972) model atmosphere, and strong evidence is obtained that sulfur is the UV absorber on Venus. The wavelength variation of contrast in UV cloud features is analyzed, and absorption is found to increase with depth at every wavelength due to the inward increase in temperature. The black-white model is applied to CO2 absorption, variations in CO2 and UV absorption with phase angle are compared, and line profiles are calculated for pressure-broadened CO2 lines. The theoretical results are compared with Venera 9 and 10 data.

Young, A. T.↗