SEARCH · Search NASA

Results for “conditional approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1972

The geometry and physical properties of exhaust clouds generated during the static firing of S-1C and S-2 rocket engines

An experimental program was conducted during the static firing of the S-1C stage 13, 14, and 15 rocket engines and the S-2 stage 13, 14, and 15 rocket engines. The data compiled during the experimental program consisted of photographic recordings of the time-dependent growth and diffusion of the exhaust clouds, the collection of meteorological data in the ambient atmosphere, and the acquisition of data on the physical structure of the exhaust clouds which were obtained by flying instrumented aircraft through the clouds. A new technique was developed to verify the previous measurements of evaporation and entrainment of blast deflector cooling water into the cloud. The results of the experimental program indicate that at the lower altitudes the rocket exhaust cloud or plume closely resembles a free-jet type of flow. At the upper altitudes, where the cloud is approaching an equilibrium condition, structure is very similar to a natural cumulus cloud.

Forbes, R. E.↗

NASA NTRS1972

Maintainability of the Space Shuttle Orbiter main engine.

Review of the long-life and minimum-turnaround-maintenance features in the design of the Space Shuttle Orbiter main engine aimed at reducing the latter's field operating costs. These features include the regeneratively cooled hot-gas system selected, the provision of additional fatigue margins in the design of rotating machinery elements, and employment of a proven approach to engine condition monitoring for fault detection and identification.

Goe, R. T.↗

NASA NTRS1974

The experimental clean combustor program - Description and status

The experimental clean combustor program is a contract effort with primary objectives including the generation and demonstration of technology for development of advanced commercial CTOL aircraft engines with lower exhaust emissions than current aircraft, and the demonstration of this technology in full scale engines in 1976. The program is being conducted in three phases. These consist of screening of low pollutant combustors, refinement of the best combustors, and engine demonstration of the best combustors. Pollution goals are emission index values of 20 and 4 for carbon monoxide and unburned hydrocarbons respectively at engine idle conditions, and an oxides of nitrogen emission index level of 10 at engine takeoff conditions. Pollution reduction approaches which are being investigated include multiple burning zone combustors, investigations of improved fuel distribution, and preparation and the staging of combustor airflow.

Niedzwiecki, R. W.↗

NASA NTRS1974

Surface-state spectra from thick-oxide MOS tunnel junctions

The conductance and capacitance of thick-oxide MOS tunnel junctions (SiO2 thickness 40 to 65 A) have been measured from 35 Hz to 210 kHz. It is demonstrated that the use of a thick-oxide MOS tunnel junction makes it possible to obtain the surface-state data throughout the whole silicon band gap with better resolution and better sensitivity than the conventional MOS capacitance techniques. A slight departure from equilibrium may occur in the voltage range where large tunnel current flows. Corrections to the energy scale must be made in this voltage range. A method for the evaluation of the junction quality is discussed. The simplified equivalent circuits necessary for the calculation of surface-state data are constructed under various bias conditions by an approach different from that used in a previously published work. The present work supports the model that at least some of the observed surface states are a consequence of the diffusion of contact metals into the oxide.

Ma, T. P.↗

NASA NTRS1975

Prediction of airframe noise

Methods of predicting airframe noise generated by aircraft in flight under nonpowered conditions are discussed. Approaches to predictions relying on flyover data and component theoretical analyses are developed. A nondimensional airframe noise spectrum of various aircraft is presented. The spectrum was obtained by smoothing all the measured spectra to remove any peculiarities due to airframe protrusions, normalizing each spectra by its overall sound pressure level and a characteristics frequency, and averaging the spectra together. A chart of airframe noise sources is included.

Hardin, J. C.↗

NASA NTRS1976

Stability and control of maneuvering high-performance aircraft

Stability and control characteristics of a high-performance aircraft have been examined over a wide range of maneuvering flight conditions, in order to identify general rules for the design of departure-preventing control systems. This has been accomplished using fully coupled linear dynamic models which account for nonzero mean values of aerodynamic angles and angular rates. Stability augmentation systems derived from optimal control theory are shown to maintain stable, well-damped aircraft dynamics over a wide range of maneuvering flight conditions. This design approach generates cross-feeds and control interconnects (as well as conventional feedback terms) for improved aircraft stability.

Stengel, R. F.↗

NASA NTRS1977

Basic coaxial mass driver reference design

The reference design for a basic coaxial mass driver is developed to illustrate the principles and optimization procedures on the basis of numerical integration by programmable pocket calculators. The four inch caliber system uses a single-coil bucket and a single-phase propulsion track with discrete coils, separately energized by capacitors. An actual driver would use multiple-coil buckets and an oscillatory multi-phase drive system. Even the basic, table-top demonstration system should in principle be able to achieve accelerations in the 1,000 m/sq sec range. Current densities of the order of 25 ka/sq cm, continuously achievable only in superconductors, are carried by an ordinary aluminum bucket coil for a short period in order to demonstrate the calculated acceleration. Ultimately the system can be lengthened and provided with a magnetically levitated, superconducting bucket to study levitation dynamics under quasi-steady-state conditions, and to approach lunar escape velocity in an evacuated tube.

Kolm, H. H.↗

NASA NTRS1980

A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

Grantham, W. D.↗

NASA NTRS1980

Development of SCR Aircraft takeoff and landing procedures for community noise abatement and their impact on flight safety

Piloted simulator studies to determine takeoff and landing procedures for a supersonic cruise transport concept that result in predicted community noise levels which meet current Federal Aviation Administration (FAA) standards are discussed. The results indicate that with the use of advanced procedures, the subject simulated aircraft meets the FAA traded noise levels during takeoff and landing utilizing average flight crew skills. The advanced takeoff procedures developed involved violating three of the current Federal Aviation Regulations (FAR) noise test conditions. These were: (1) thrust cutbacks at altitudes below 214 meters (700 ft); (2) thrust cutback level below those presently allowed; and (3) configuration change, other than raising the landing gear. It was not necessary to violate any FAR noise test conditions during landing approach. It was determined that the advanced procedures developed do not compromise flight safety. Automation of some of the aircraft functions reduced pilot workload, and the development of a simple head-up display to assist in the takeoff flight mode proved to be adequate.

Grantham, W. D.↗

NASA NTRS1981

Helical helicopter approaches with microwave landing system guidance

It is desirable that the landing approach of helicopters and V/STOL aircraft into a congested airport equipped with a microwave landing system (MLS) can take place essentially independent of CTOL traffic. The helical approach has been proposed as one way to provide aircraft separation while requiring minimum airspace. A helical descent makes it possible for the helicopter to lose altitude in a confined airspace without descending along an excessively steep glide slope. This avoids helicopter handling problems which occur at slow airspeeds. Preliminary flight-test data are presented regarding the operational feasibility of the helical approach under IFR conditions where the primary guidance information is from an MLS.

Mcgee, L. A.↗

NASA NTRS1983

Is Titan wet or dry?

Titan's dense and cold nitrogen atmosphere contains a small amount of methane under conditions at least approaching those at which one or both constituents would condense. The possibility of methane and nitrogen rain clouds and global methane oceans has been discussed widely. From specific features of radio occultation and other Voyager results, however, it is concluded that nitrogen does not condense on Titan and that Titan has neither global methane oceans nor a global cloud of liquid methane droplets. Certain results indirectly support the conjecture that methane does not condense at any location. However, other considerations favor a methane ice haze high in the troposphere, and liquid and solid methane might exist on the surface and as low clouds at polar latitudes.

Eshleman, V. R.↗

NASA NTRS1984

MHD stability of compressible coronal loops with radiative energy loss

The effect of radiative energy loss on the stability of compressible plasma in coronal loops is studied. By taking the limit as poloidal wavenumber m approaches infinity, stability conditions for local modes are derived. It was found that the radiation effect can trigger MHD instabilities of coronal loops which are in ideally marginally stable states. Compressibility is a stabilizing effect for ideal MHD local modes because the compression of magnetic field lines exerts a restoring force by increasing magnetic pressure. Compression of plasma induces two modes in a radiatively unstable plasma, magnetosonic and condensation modes. Compressibility affects the stability of ideally stable (or unstable) coronal plasmas through magnetosonic modes, which are a stabilizing (destabilizing) effect for ideally stable (unstable) plasmas. For coronal plasmas in ideally marginally stable states, condensation as well as magnetosonic modes can trigger MHD instability. Because of these two modes, the effect of radiation on compressible coronal plasmas is more destabilizing than it is on incompressible plasmas when the plasmas are in ideal MHD unstable or marginally stable states.

An, C.-H.↗

NASA NTRS1985

Extension of ground-based testing for large space structures

A major concern for future large space structures is the ability to verify their dynamic characteristics by ground test. This article presents the results of the multiple boundary conditions test (MBCT) approach, which provides a complete ground test of a large structure that will provide, in turn, the data necessary to construct a test-verified final mathematical model. Theoretical studies indicate that this approach can provide a better final model than a ground test of the full-scale very flexible structure in a 1-g field. The approach is demonstrated by a mathematical simulation.

Wada, B. K.↗

NASA NTRS1985

Flight evaluation of highly augmented controls and electronic displays for precision approach and landing of powered-lift aircraft

Experiments were conducted on simulators and on the Quiet Short-Haul Research Aircraft to evaluate the effect of highly augmented control modes and electronic displays on the ability of pilots to execute precision approaches and landings on a short runway. It is found that the primary benefits of highly augmented flightpath and airspeed controls and electronic displays are realized when the pilot is required to execute precisely a complex transition and approach under instrument conditions and in the presence of a wide range of wind and turbulence conditions. A flightpath and airspeed command and stabilization system incorporating nonlinear, inverse system concepts produced fully satisfactory flightpath control throughout the aircraft's terminal operating envelope.

Franklin, J. A.↗

NASA NTRS1985

An experimental approach to validating a theory of human error in complex systems

The problem of 'human error' is pervasive in engineering systems in which the human is involved. In contrast to the common engineering approach of dealing with error probabilistically, the present research seeks to alleviate problems associated with error by gaining a greater understanding of causes and contributing factors from a human information processing perspective. The general approach involves identifying conditions which are hypothesized to contribute to errors, and experimentally creating the conditions in order to verify the hypotheses. The conceptual framework which serves as the basis for this research is discussed briefly, followed by a description of upcoming research. Finally, the potential relevance of this research to design, training, and aiding issues is discussed.

Morris, N. M.↗

NASA NTRS1986

Evaluation of cloud shading effects on the generation and modification of mesoscale circulations

This study presents scale analysis and numerical model evaluations of the impact of cloud shading on (1) the development of sea breeze and thermally induced upslope flows and (2) the generation of mesoscale circulations between cloudy areas adjacent to clear areas. Based on the assumption of modifications of solar and longwave radiation which are typical for some overcast conditions, it was found that the reduction in the first type of circulation is significant and most noticeable in the vertical velocities. In the second case, thermally induced circulations in favorable conditions appear to approach the typical intensity of the sea breeze.

Segal, M.↗

NASA NTRS1986

Flight evaluation of augmented controls for approach and landing of powered-lift aircraft

Flight experiments were conducted with Ames Research Center's Quiet Short-Haul Research Aircraft to evaluate the influence of highly augmented control modes on the ability of pilots to execute precision instrument flight operations in the terminal area, particularly approaches to and landings on a short runway. The aircraft is a powered-lift, short-takeoff and landing configuration that is equipped with a modern digital fly-by-wire flight control system, a head-up display, and a solar head-down display that make it possible to investigate control concepts and display format and content for full envelope, powered-lift operations. Considerable attention has been devoted in this flight program to assessing flightpath and airspeed command and stabilization modes developed using nonlinear, inverse model-following methods. The primary benefit of this control concept was realized when the pilot was required to execute a complex transition and approach under instrument conditions and in the presence of a wide range of wind and turbulence conditions.

Franklin, J. A.↗

NASA NTRS1987

Synthesis and characterization of processable polyimides with enhanced thermal stability

Many of the emerging applications of polymers on space vehicles require materials with outstanding thermal stability. These polymers must also be readily processable in order to facilitate their use. The syntheses and polymerization of a cardo dianhydride were investigated. This monomer was prepared via the reaction of N-methyl 4-nitrophthalimide with a cardo diol. Polyimides containing oxyalkylene linkages were studied. The effects of two additional structural modifications on the polymers' properties were investigated. The effects of carrying out the preparation of poly(amic acid)s under non-equilibrium conditions were examined. Approaches that were investigated included the in-situ neutralization of the generated amic acid and its in-situ esterification.

Harris, Frank W.↗