Search NASA⌕ Search

SEARCH · Search NASA

Results for “corn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

User oriented multispectral data processing at the University of Michigan

The feasibility of solving practical multispectral data reduction problems by available processing techniques and the identification of areas for more technical development requirements are considered. Parameter mapping and ratio mapping techniques prove their usefulness in a corn blight watch experiment. A hybrid computer processing system is advocated for complete realization of aircraft and spacecraft sensor potentials.

Thomson, F. J.↗

Land utilization and water resource inventories over extended test sites

In addition to the work on the corn blight this year, several other analysis tests were completed which resulted in significant findings. These aspects are discussed as follows: (1) field spectral measurements of soil conditions; (2) analysis of extended test site data; this discussion involves three different sets of data analysis sequences; (3) urban land use analysis, for studying water runoff potentials; and (4) thermal data quality study, as an expansion of our water resources studies involving temperature calibration techniques.

Hoffer, R. M.↗

Aircraft data acquisition

The corn blight project was different than previously planned missions in duration, coverage, and sensor configuration. The wide aerial coverage and single sensor configuration provided flexibility in mission operations that contributed to mission success. This project also provided a review of the data on a timely basis permitting sensor corrections to be made and evaluated in the field.

Blilie, R. K.↗

Optical transmittance of fused silica at elevated temperatures during high energy electron bombardment.

An experimental determination of the optical transmission of Corning 7940 UV and Suprasil I fused silica has been made. The LeRC dynamitron provided the equivalent ionizing radiation and high temperature that the transparent gas divider of an operating nuclear light bulb engine would experience. The irradiation induced absorption was measured at 2150 A, 2700 A, and 4500 A. The length of the irradiations were sufficient so that an equilibrium between radiation induced coloration and high temperature annealing was reached. The experimental results indicate a significant optical absorption, particularly at the shorter wavelength, which would make the use of fused silica in this concept questionable.

Smith, A. B.↗

Current drainage to a high voltage probe in a dilute plasma.

The current drainage from a plasma through approximately 0.05 cm diameter holes in Kapton H polymide film, FEP type C, and quartz (7940 Corning glass) placed on a probe at voltages up to 2000 volts dc have been determined both analytically and experimentally. A Laplace field was used to numerically predict an upper limit for the drainage current. The measured current was less than the calculated current for the FEP and quartz, and the two were approximately in agreement for Kapton H. The measured currents were on the order of 5 microamperes with the calculated currents on the order of 10 microamperes.

Grier, N. T.↗

Crop identification and acreage measurement utilizing ERTS imagery

There are no author-identified significant results in this report. The microdensitometer will be used to analyze data acquired by ERTS-1 imagery. The classification programs and software packages have been acquired and are being prepared for use with the information as it is received. Photo and digital tapes have been acquired for coverage of virtually 100 percent of the test site areas. These areas are located in South Dakota, Idaho, Missouri, and Kansas. Hass 70mm color infrared, infrared, black and white high altitude aerial photography of the test sites is available. Collection of ground truth for updating the data base has been completed and a computer program written to count the number of fields and give total acres by size group for the segments in each test site. Results are given of data analysis performed on digitized data from densitometer measurements of fields of corn, sugar, beets, and alfalfa in Kansas.

Vonsteen, D. H.↗

A study of the utilization of ERTS-A data from the Wabash River Basin. An early analysis of ERTS-1 data

The author has identified the following significant results. A classification of a portion of frame E-1016-16050 CCT was completed using the LARSYS software. The categories: row crops (corn or soybeans), forest and woodland areas, diverted acres of pastureland or nonproductive grassland areas, water (rivers), clouds, and cloud shadows, were represented by one or more spectral classes. The results of this classification are significant in that they show potential for accurate identification and delineation of forested and agricultural areas using automatic data handling techniques.

Landgrebe, D. A.↗

Influence of haze layers upon remotely-sensed surface properties

The possibility that the presence of hazy layers contributes to anomalous effects in airplane remote sensing data on corn blight distribution is studied. Computations of scattering angles along flightlines are used to estimate reflected intensity variations as observed in bright and dark sides along flightline of the aircraft.

Jurica, G. M.↗

Definition of spectrally separable classes for soil survey research

A procedure is outlined for defining spectral classes such that the differences between classes can be quantified. It also facilitates determination of a number of classes such that the classes are spectrally discriminable. This is accomplished by partitioning the data into many classes and then combining similar spectral classes on the basis of appropriate criteria. Multispectral data were collected over a 12-mile flightline in White County, Indiana, in connection with the 1971 Corn Blight Watch Experiment. Data were collected in May by the University of Michigan airborne scanning spectrometer at an altitude of 5000 feet. Spectral maps resulting from the analysis were compared to existing soil surveys of the National Cooperative Soil Survey. The method should help determine the extent to which spectral properties of soil surfaces can be associated with morphologic and topographic differences of interest to soil surveyors engaged in operational soil mapping.

Cipra, J. E.↗

Potential benefits of remote sensing: Theoretical framework and empirical estimate

A theoretical framwork is outlined for estimating social returns from research and application of remote sensing. The approximate dollar magnitude is given of a particular application of remote sensing, namely estimates of corn production, soybeans, and wheat. Finally, some comments are made on the limitations of this procedure and on the implications of results.

Eisgruber, L. M.↗

Ultraviolet and charged particle irradiation of proposed solar cell coverslide materials and conductive coatings for the Helios spacecraft

Coverslide materials consisting of Corning 7940 fused silica, multilayers of titanium and manganese oxides (blue reflector), and indium oxide (conductive-coating) were exposed to 16 UVSC up to 800 EUVSH in vacuum. Slight changes in optical transmittance and optical absorptance were found in the (200-360) millimicron regions of the fused silica and conductive coating respectively. Exposure to 4 KeV protons and 4.5 KeV electrons in vacuum, produced decreases of several percent in transmittance, (200-360) millimicron region in the fused silicas after total fluxes less or = 10 to the 14th power particles/sq cm. Sheet resistance of the conductive coating increased above 1.0 kilo-ohm/square after a total flux less or = 10 to the 14th power particles/sq cm. Solar cells with coverglasses utilizing the indium oxide conductive coating were exposed to 1 Mev electrons and 1 Mev protons in air and in vacuum. Total fluxes ranged from 10 to the 11th power particles/sq cm to 10 to the 15th power particle/sq cm. There was no appreciable degradation in the resistance of the conductive coating during or after these tests.

Fry, J.↗

A study of the utilization of ERTS-1 data from the Wabash River Basin

The author has identified the following significant results. Preliminary acreage estimates for corn, soybeans, and other cover types made from classification of ERTS-1 data compared well with those made by the U.S. Department of Agriculture. Registration of multiple frames of ERTS-1 CCT data over Lynn County, Texas and DeKalb County, Illinois was achieved to a high degree of accuracy. Spectral/temporal computer pattern recognition analysis was carried out for the first time using satellite data.

Landgrebe, D. A.↗

Task 3: Atmospheric Effects in ERTS-1 Data, 1410

The author has identified the following significant results. Results of crop mensuration and recognition studies in the Sacramento Valley indicate that the measurement of acreages of rice fields from ERTS-1 data can be dramatically improved by utilizing a processing technique which estimates the proportion of rice and bare soil in field boundary elements classified as corn by conventional pattern recognition techniques.

Thomson, F. J.↗

Design, manufacture, and test of coolant pump-motor assembly for Brayton power conversion system

The design, development, fabrication, and testing of seven coolant circulating pump-motor assemblies are discussed. The pump-motor assembly is driven by the nominal 44.4-volt, 400-Hz, 3-phase output of a nominal 56-volt dc input inverter. The pump-motor assembly will be used to circulate Dow Corning 200 liquid coolant for use in a Brayton cycle space power system. The pump-motor assembly develops a nominal head of 70 psi at 3.7 gpm with an over-all efficiency of 26 percent. The design description, drawings, photographs, reliability results, and developmental and acceptance test results are included.

Gabacz, L. E.↗

Identification of agricultural crops by computer processing of ERTS MSS data

Quantitative evaluation of computer-processed ERTS MSS data classifications has shown that major crop species (corn and soybeans) can be accurately identified. The classifications of satellite data over a 2000 square mile area not only covered more than 100 times the area previously covered using aircraft, but also yielded improved results through the use of temporal and spatial data in addition to the spectral information. Furthermore, training sets could be extended over far larger areas than was ever possible with aircraft scanner data. And, preliminary comparisons of acreage estimates from ERTS data and ground-based systems agreed well. The results demonstrate the potential utility of this technology for obtaining crop production information.

Bauer, M. E.↗

Remote sensing applications in agriculture and forestry. Applications of aerial photography and ERTS data to agricultural, forest and water resources management

Remote sensing techniques are being used in Minnesota to study: (1) forest disease detection and control; (2) water quality indicators; (3) forest vegetation classification and management; (4) detection of saline soils in the Red River Valley; (5) corn defoliation; and (6) alfalfa crop productivity. Results of progress, and plans for future work in these areas, are discussed.

Source record↗