Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Selenium interaction with iron minerals: Quantitative comparison of sorption and coprecipitation impacts on mobility

Given the significance of selenium (Se) as a micronutrient, the radioactive nature of some of its isotopes, and its affinity to iron (Fe) minerals, extensive research has been conducted on the sorption mechanisms between Se and these minerals. Here, in this study, we employ sorption data sourced from the L-SCIE database and coprecipitation data from available literature to achieve the following objectives: i) establish coherence between adsorption and coprecipitation processes, ii) quantitatively evaluate the importance of these processes in nuclear waste repository science, and iii) propose a forward-looking approach for integrating coprecipitation into reactive transport models. Our findings indicate that a correlation between Se adsorption and coprecipitation can be established using the λ formalism. The comparable log(λ Se(IV) /λ Se(VI) ) ratios derived from adsorption and coprecipitation experiments suggest that these processes can be quantitatively compared and evaluated using our numerical approach. Across all iron oxide phases examined, coprecipitation leads to significantly greater immobilization of Se compared to adsorption. Specifically, for hydrous ferric oxide, hematite, and goethite, coprecipitation is predicted to result in 100–1000 times more Se immobilization compared to adsorption, irrespective of the Se oxidation state (Se(IV) or Se(VI)); notably stronger immobilization potential via coprecipitation was observed for magnetite. The modeling approach and quantitative analysis presented herein clearly highlight the importance of including coprecipitation processes when simulating Se (and other elements) transport, particularly under conditions where mineral compositions are transient or evolving with time. Neglecting coprecipitation in models is likely to lead to significant overestimates of migration.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Sockeye Code Validation Against UNIST Heat Pipe - Poster - Internship 2025

Sockeye is an engineering level code being developed under the MOOSE framework for modeling heat pipes. A heat pipe is a sealed tube with a wick structure filled with a working fluid that transfers heat efficiently and passively via phase change of the working fluid. Heat applied to the evaporator end creates a pressure gradient which causes vapor to migrate to the condenser end where the vapor deposits its energy and condenses. Capillary force generated by the wick structure then draws the liquid back to the evaporator. A validation study was performed to compare the Sockeye code against data produced at the Ulsan National Institute of Standards and Technology for a slightly overfilled sodium heat pipe. The heat pipe was operated under natural convection cooling and a decreasing inactive length was observed. The experiment was modeled in Sockeye using the condenser pool model, the front non-condensable gas (NCG) model, and the mixture NCG model separately to reproduce the inactive length phenomenon. Also, a new capability was implemented in MOOSE to allow for conjugate heat transfer from the condenser based on the Churchill-Chu correlation for natural convection. The condenser pool model showed an increasing inactive length, demonstrating that the behavior was likely not caused by a pool of excess liquid. The front NCG model was able to show good agreement with the experiment, but it suffered convergence issues at the front. Finally, the mixture NCG model gave good results when the axial mesh was sufficiently refined. This work culminated in additions to the Sockeye documentation and a contribution to a journal article that will be published later. This poster is a summary of my work which I can take back to my university for presentation.

42 - ENGINEERING↗
DOE OSTI2025

Liquid-liquid phase transition of hydrogen and its critical point: Analysis from ab initio simulation and a machine-learned potential

We simulate high-pressure hydrogen in its liquid phase close to molecular dissociation using a machine-learned interatomic potential. The model is trained with density functional theory (DFT) forces and energies, with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional. We show that an accurate NequIP model, an E(3)-equivariant neural network potential, accurately reproduces the phase transition present in PBE. Moreover, the computational efficiency of this model allows for substantially longer molecular dynamics trajectories, enabling us to perform a finite-size scaling (FSS) analysis to distinguish between a crossover and a true first-order phase transition. Here, we locate the critical point of this transition, the liquid-liquid phase transition (LLPT), at 1200-1300 K and 155-160 GPa, a temperature lower than most previous estimates and close to the melting transition.

08 HYDROGEN↗
DOE OSTI2024

Coupling strongly correlated electron systems to a tunable electronic reservoir

Here, we study the effect of coupling an electronic reservoir to a Hubbard model and to a dimer Hubbard model. This is motivated by recent experiments on the effect of illumination on the insulator-metal transition in a vanadium oxides and photoconductive cadmium sulfide heterostructure. We model the system as an electronic reservoir hybridized to the correlated system. We assume that the light intensity controls the hybridization coupling strength. We find that the light intensity acts similarly as the temperature in the weak interaction regime. This is consistent with the role played by electronic reservoirs in out-of-equilibrium systems. In contrast, qualitative differences appear at strong coupling. We show that modeling the V 2 ⁢O 3 compound with a Hubbard model, our results describe qualitatively well the observed illumination-driven suppression of the insulator-metal transition. In contrast, in the DHM results fail to capture the mild suppression observed in the case of VO 2 . This indicates that the lattice may play an important role in this case.

Materials Science↗
DOE OSTI2025

Data-driven high-dimensional statistical inference with generative models

Crucial to many measurements at the LHC is the use of correlated multi-dimensional information to distinguish rare processes from large backgrounds, which is complicated by the poor modeling of many of the crucial backgrounds in Monte Carlo simulations. In this work, we introduce HI-SIGMA, a method to perform unbinned high-dimensional statistical inference with data-driven background distributions. In contradistinction to many applications of Simulation Based Inference in High Energy Physics, HI-SIGMA relies on generative ML models, rather than classifiers, to learn the signal and background distributions in the high-dimensional space. These ML models allow for interpretable inference while also incorporating model errors and other sources of systematic uncertainties. We showcase this methodology on a simplified version of a di-Higgs measurement in the bbγγ final state, where the di-photon resonance allows for background interpolation from sidebands into the signal region. We demonstrate that HI-SIGMA provides improved sensitivity as compared to standard classifier-based methods, and that systematic uncertainties can be straightforwardly incorporated by extending methods which have been used for histogram based analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Denoising Autoencoder for Reconstructing Sensor Observation Data and Predicting Evapotranspiration: Noisy and Missing Values Repair and Uncertainty Quantification

Abstract Machine learning (ML) methods applied in scientific research often deal with interrelated features in high‐dimensional data. Reducing data noise and redundancy is needed to increase prediction accuracy and efficiency especially when dealing with data from field sensors. We explored an unsupervised learning method, the denoising autoencoder (DAE), to extract the underlying data structure from noisy raw data in the context of predicting hydrologic quantities from multiple field sensors. These sensors have intrinsic instrumental noise and occasional malfunctions that cause missing values. Our DAE neural network reconstructed meteorological sensor data containing noise and missing values to predict evapotranspiration in a mountainous watershed. The DAE reconstructed the sensor variables with a mean coefficient of determination value of 0.77 across 15 dimensions representing individual sensors. It reduced variance and bias uncertainties compared to a classical autoencoder model. The reconstruction quality varied across dimensions depending on their cross‐correlation and alignment with the underlying data structure. Uncertainties arising from the model structure were overall higher than those resulting from data corruption. We attached the DAE structure to a downstream ET‐prediction neural network in three formats and achieved reasonably accurate ET predictions . The use of the DAE notably reduced variance uncertainty in ET prediction. However, excessive variance reduction may be accompanied by an increase in bias due to the intrinsic bias‐variance tradeoff. Our method of evaluating and reducing uncertainties in aggregated data from different sources can be used to improve predictive models, process understanding, and uncertainty quantification for better water resource management. Plain Language Summary We present a machine learning method, namely the denoising autoencoder, which reduces the effects of data noise and missing values typically present in scientific data sets collected through sensor measurements. This method selects the most relevant information from noisy raw data collected by the instruments and fills in missing values. To demonstrate the effectiveness of our method, we applied it to predict evapotranspiration, a hydrologic variable that represents the water moved from the land surface to the atmosphere through a combination of evaporation and plant water use (transpiration). We also used a random sampling technique (the Monte Carlo method) to compare the uncertainty in the predictions when using the raw and noisy data versus the reconstructed data. The denoising process produced more accurate predictions of evapotranspiration with less uncertainty. Improved predictions of evapotranspiration can lead to a better understanding and accounting of water budgets. This ML approach is broadly suitable for a wide variety of applications that involve noisy sensor data with missing values. Key Points We used a denoising autoencoder (DAE) neural network to reduce noise in meteorological and soil sensor observations by on average We used Monte Carlo sampling to estimate the bias and variance of all model outputs, including uncertainty sources from data and the model We attached the DAE component to a downstream neural network to predict ET with the variance reduced by , compared to that without the DAE

denoising autoencoder↗
DOE OSTI2025

Rare events and Griffiths phases in topological quantum error correction

The performance of quantum error correcting (QEC) codes is often studied under the assumption of spatiotemporally uniform error rates. On the other hand, experimental implementations almost always produce heterogeneous error rates, in either space or time, as a result of effects such as imperfect fabrication and/or cosmic rays. It is therefore important to understand if and how their presence can affect the performance of QEC in qualitative ways. Here, in this work, we study the effects of nonuniform error rates in the representative examples of the 1D repetition code and the 2D toric code, focusing on when they have extended spatiotemporal correlations; these may arise, for instance, from rare events (such as cosmic rays) that temporarily elevate error rates over the entire code patch. These effects can be described in the corresponding statistical mechanics models for decoding, where long-range correlations in the error rates lead to extended rare regions of weaker coupling. For the 1D repetition code where the rare regions are linear, we find two distinct decodable phases: a conventional ordered phase in which logical failure rates decay exponentially with the code distance, and a rare-region dominated Griffiths phase in which failure rates are parametrically larger and decay as a stretched exponential. In particular, the latter phase is present when the error rates in the rare regions are above the bulk threshold. For the 2D toric code where the rare regions are planar, we find no decodable Griffiths phase: rare events which boost error rates above the bulk threshold lead to an asymptotic loss of threshold and failure to decode. Unpacking the failure mechanism implies that techniques for suppressing extended sequences of repeated rare events (which, without intervention, will be statistically present with high probability) will be crucial for QEC with the toric code.

classical statistical mechanics↗
DOE OSTI2026

Molten Halide Salt Surface Tension: Methods and Correlations

Here, this paper reviews various methods for studying surface tension and their applicability to fluoride and chloride molten salt systems, including a comparison of benefits and drawbacks. Such a comparison aids in experiment design based on desired factors such as scale, accuracy, and repeatability. A detailed review is presented for existing literature data regarding the surface tension of molten fluoride and chloride salts. These reference data were compiled and analyzed to determine cross-validated correlation equations for several alkali and alkaline earth fluoride and chloride salts as functions of temperature. These correlations are necessary for reliable multiphysics modeling approaches as well as accurate design and analysis of multiphase molten salt phenomena such as gas sparging and bubble formation/transport. This analysis supports the development of the thermophysical arm of the Molten Salt Thermal Properties Database (MSTDB-TP) managed by Oak Ridge National Laboratory.

Chloride↗
DOE OSTI2023

Correlating Impacts of Injected Fuels on Carbon Emissions in Blast Furnace with Computational Fluid Dynamics Modeling

A major challenge for steelmaking is the reduction of CO 2 emissions. In this regard, the blast furnace (BF) is critical due to the high associated CO 2 levels. This investigation assesses the impact of tuyere‐injected fuels on BF CO 2 emissions. Specifically, computational fluid dynamics results obtained previously at Purdue University Northwest are analyzed to obtain CO 2 emissions when natural gas (NG), syngas, hydrogen, or hydrogen/NG are injected. CO 2 emissions are compared with those produced when 95 kg of NG/thm is injected. Among these scenarios, the largest CO 2 reduction occurs when 102 kg of syngas/thm (COG feedstock #1) is injected at 973 K, reducing CO 2 by 190.6 kg thm −1 . The largest CO 2 reduction obtained with NG occurs when 130 kg thm −1 is injected at 600 K, reducing emissions by 65 kg thm −1 . H 2 injection also reduces CO 2 , but requires careful adjusting to reach stable operation. For instance, injecting 35 kg of H 2 /thm reduces CO 2 by 52 kg thm −1 . Increasing gaseous injection rates can significantly reduce CO 2 emissions, with fuel preheating providing an addendum, but high injection rates can lead to unstable operation. Furthermore, results show a correlation between CO 2 emissions and average temperature of shaft region for multiple fuels and injection conditions.

Metallurgy & Metallurgical Engineering↗
DOE OSTI2025

Ground-state-based model reduction with unitary circuits

Here, we present a method to numerically obtain low-energy effective models based on a unitary transformation of the ground state. The algorithm finds a unitary circuit that transforms the ground state of the original model to a projected wavefunction with only the low-energy degrees of freedom. The effective model can then be derived using the unitary transformation encoded in the circuit. We test our method on the one-dimensional and two-dimensional square-lattice Hubbard model at half-filling, and obtain more accurate effective spin models than the standard perturbative approach.

Hubbard model↗
DOE OSTI2024

An Analysis of the Spatial Variations in the Relationship Between Built Environment and Severe Crashes

Traffic crashes significantly contribute to global fatalities, particularly in urban areas, highlighting the need to evaluate the relationship between urban environments and traffic safety. This study extends former spatial modeling frameworks by drawing paths between global models, including spatial lag (SLM), and spatial error (SEM), and local models, including geographically weighted regression (GWR), multi-scale geographically weighted regression (MGWR), and multi-scale geographically weighted regression with spatially lagged dependent variable (MGWRL). Utilizing the proposed framework, this study analyzes severe traffic crashes in relation to urban built environments using various spatial regression models within Leon County, Florida. According to the results, SLM outperforms OLS, SEM, and GWR models. Local models with lagged dependent variables outperform both the global and generic versions of the local models in all performance measures, whereas MGWR and MGWRL outperform GWR and GWRL. Local models performed better than global models, showing spatial non-stationarity; so, the relationship between the dependent and independent variables varies over space. The better performance of models with lagged dependent variables signifies that the spatial distribution of severe crashes is correlated. Finally, the better performance of multi-scale local models than classical local models indicates varying influences of independent variables with different bandwidths. According to the MGWRL model, census block groups close to the urban area with higher population, higher education level, and lower car ownership rates have lower crash rates. On the contrary, motor vehicle percentage for commuting is found to have a negative association with severe crash rate, which suggests the locality of the mentioned associations.

Alisan, Onur (ORCID:0000000193113984)↗
DOE OSTI2025

Hierarchical Gaussian process-based Bayesian optimization for materials discovery in high entropy alloy spaces

Bayesian optimization (BO) is a powerful and data-efficient method for iterative materials discovery and design, particularly valuable when prior knowledge is limited, underlying functional relationships are complex or unknown, and the cost of querying the materials space is significant. Traditional BO methodologies typically utilize conventional Gaussian Processes (cGPs) to model the relationships between material inputs and properties, as well as correlations within the input space. However, cGP-BO approaches often fall short in multi-objective optimization scenarios, where they are unable to fully exploit correlations between distinct material properties. Leveraging these correlations can significantly enhance the discovery process, as information about one property can inform and improve predictions about others. Here, this study addresses this limitation by employing advanced kernel structures to capture and model multi-dimensional property correlations through multi-task (MTGPs) or deep Gaussian Processes (DGPs), thus accelerating the discovery process. We demonstrate the effectiveness of MTGP-BO and DGP-BO in rapidly and robustly solving complex materials design challenges that occur within the context of complex multi-objective optimization over FCC FeCrNiCoCu high entropy alloy (HEA) spaces, where traditional cGP-BO approaches fail. Furthermore, we highlight how the differential costs associated with querying various material properties can be strategically leveraged to make the materials discovery process more cost-efficient.

36 MATERIALS SCIENCE↗
DOE OSTI2026

CAD-VAE: Leveraging Correlation-Aware Latents for Comprehensive Fair Disentanglement

While deep generative models have significantly advanced representation learning, they may inherit or amplify biases and fairness issues by encoding sensitive attributes alongside predictive features. Enforcing strict independence in disentanglement is often unrealistic when target and sensitive factors are naturally correlated. To address this challenge, we propose CAD-VAE(Correlation-Aware Disentangled VAE), which introduces a correlated latent code to capture the information shared between the target and sensitive attributes. Given this correlated latent, our method effectively separates over-lapping factors without extra domain knowledge by directly minimizing the conditional mutual information between target and sensitive codes. A relevance-driven optimization strategy refines the correlated code by efficiently capturing essential correlated features and eliminating redundancy. Extensive experiments on benchmark datasets demonstrate that CAD-VAE produces fairer representations, realistic counterfactuals, and improved fairness-aware image editing.

Ma, Chenrui [University of California Irvine]↗
DOE OSTI2025

Physics-Driven Construction of Compact Primitive Gaussian Density Fitting Basis Sets

We present a model-assisted density fitting (MADF) basis set generator, an algorithm for generating primitive atomic Gaussian density fitting (DF) basis sets (DFBSs) from a contracted Gaussian orbital basis set (OBS). The MADF algorithm produces DFBSs suitable for accurate robust DF approximation of 2-particle interactions in mean-field and correlated electronic structures. The algorithm is designed to (a) saturate the OBS product space by a large regularized set of primitive solid-harmonic Gaussian shells with nonuniform distribution of exponents, followed by (b) pruning of the shells according to their contributions to the 2- body energy of a correlated atomic ensemble. Building the DFBS generator model almost exclusively on mathematical and physical principles allows one to limit the number of parameters that control the density fitting error to three, with a single set of parameters sufficient for computations with all basis cardinal numbers, with and without correlation of core electrons, with and without scalar and spin-dependent relativistic effects, spanning almost all of the Periodic Table. Performance assessment included basis sets up to quadruple-ζ quality from several major basis set families, using molecules composed of main-group, d-block, and f-block elements. The resulting DF errors in Hartree−Fock and second-order MP2 energies (with relativistic all-electron treatments, when appropriate) were on the order of 20 and 10 μE h per electron, respectively.

Approximation↗
DOE OSTI2024

The secret structure of the gravitational vacuum

We argue that the vacuum of quantum gravity must contain a hierarchical structure of correlations spanning all length scales. These correlated domains (called “vecros”) correspond to virtual fluctuations of black hole microstates. Larger fluctuations are suppressed by their larger action, but this suppression is offset by a correspondingly larger phase space of possible configurations. We give an explicit lattice model of these vecro fluctuations, noting how their distribution changes as the gravitational pull of a star becomes stronger. At the threshold of formation of a closed trapped surface, these virtual fluctuations transition into on-shell black hole microstates (fuzzballs). Fuzzballs radiate from their surface like normal bodies, resolving the information paradox. Here, we also argue that any model without vecro-type extended vacuum correlations cannot resolve the paradox.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Characterizing the multisectoral impacts of future global hydrologic variability

There is significant uncertainty in how global water supply will evolve in the future, due to uncertain climate, socioeconomic, and land use change drivers and variability of hydrologic processes. It is critical to characterize the potential impacts of uncertainty in future water supply given its importance for food and energy production. In this work, we introduce a framework that integrates stochastic hydrology and human-environmental systems to characterize uncertainty in future water supply and its multisector impacts. We develop a global stochastic watershed model and demonstrate that this model can generate a large ensemble of realizations of basin-scale runoff with global coverage that preserves the mean, variance, and spatial correlation of a historical benchmark. We couple this model with a well-known human-environmental systems model to explore the impacts of runoff variability on the water and agricultural sectors across spatial scales. We find that the impacts of future hydrologic variability vary across sectors and regions. Impacts are felt most strongly in the water and agricultural sectors for basins that are expected to have unsustainable water use in the future, such as the Indus River basin. For this basin, we find that the variability in future irrigation water withdrawals and irrigated cropland increase over time due to uncertainty in renewable water supply. We also use the Indus basin to show how our stochastic ensemble can be leveraged to explore the global multisector consequences of local extreme runoff conditions. This work introduces a novel technique to explore the propagation of future hydrologic variability across human and natural systems and spatial scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating the bond strength and fracture mechanisms of cold-sprayed zinc coating on AZ91 magnesium substrate via a combined experimental and computational approach

Magnesium (Mg) alloys are ideal candidates for automotive applications due to their high strength to weight ratio, castability, recyclability etc., however, they lack corrosion and oxidation resistance. Solid-state deposition techniques, such as cold spray, have been demonstrated to enhance their corrosion resistance as it relies on the severe plastic deformation of powder particles upon impact with the substrate to form a metallurgical bond with the substrate and within the coating. At cold sprayed interfaces, a heterogeneous microstructure is formed that includes some porosity, oxides and intermetallics which can significantly affect coating performance. Thus, establishing a direct correlation between the interface microstructure and its properties can aid in designing optimal cold spray parameters. In this study, we investigated the microstructure and mechanical properties of a zinc (Zn) coating deposited on a high pressure die cast (HPDC) AZ91 Mg substrate via high resolution scanning transmission electron microscopy, in situ micro-tensile testing, and finite element method (FEM) modeling. Micro-tensile pillars fabricated using the plasma focused ion beam (PFIB) successfully isolates the coating-substrate interface within the gauge length. The average bond strength of Zn-Mg interface was determined to be ∼140 MPa with failure occurring partially at the interface and mostly into the coatings. A detailed microstructural characterization revealed evidence of a strong metallurgical bonding at the Zn-Mg interface and formation of the C14 MgZn 2 laves phase interlayer resulting in a mixed mode of fracture during the micro-tensile experiments. FEM modeling reveals the stress distribution along the interfaces and suggests that a MgZn 2 layer thickness between 200–400 nm is optimum to increase the bond strength and minimize the triaxiality. Such a site-specific interfacial analysis with correlative computational modeling provides crucial insight into the overall performance of cold spray interfaces.

Bond strength↗
DOE OSTI2025

Effect of alloying on intrinsic ductility in WTaCrV high entropy alloys

Tungsten (W) exhibits desirable properties for extreme applications, such as the divertor in magnetic fusion reactors, but its practicality remains limited due to poor formability and insufficient irradiation resistance. In this work, we study the intrinsic ductility of body-centered cubic WTaCrV based high entropy alloys (HEAs), which are known to exhibit excellent irradiation resistance. The ductility evaluations are carried out using a criterion based on the competition between the critical stress intensity factors for emission (K Ie ) and cleavage (K Ic ) in the {110} slip planes and {110} crack planes, which are evaluated within the linear elastic fracture mechanics framework and computed using density functional theory. The results suggest that increasing the alloying concentrations of V and reducing the concentrations of W can significantly improve the ductility in these HEAs. The elastic anisotropy for these HEAs is analyzed using the Zener anisotropy ratio and its correlation with the concentration of W in the alloys is studied. Results indicate that these alloys tend to be fairly isotropic independently from the concentration of W in them. The computed data for the elastic constants of these HEAs is also compared against available experimental data. The results are in good agreement, validating the robustness and accuracy of the computational methods. Multiple phenomenological ductility metrics were also computed and analyzed against the analytical model. Some metrics, mainly the surrogate D parameter, show a good correlation with the Rice model. The potential of these empirical metrics to serve as surrogate screening models for optimizing the compositional space is also discussed.

Anisotropy↗