Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Significance of Lignin S/G Ratio in Biomass Recalcitrance of Populus trichocarpa Variants for Bioethanol Production

Lignin S/G ratio has been investigated as an important factor in biomass recalcitrance to bioethanol production. Because of the complexity and variety of biomass, recalcitrance was also reportedly influenced by several other factors, such as total lignin content, degree of cellulose polymerization, etc. In addition, the effect of S/G ratio on biomass conversion is not uniform across plant species. Herein, 11 Populus trichocarpa natural variants grown under the same conditions with similar total lignin content were selected to minimize the effects of other factors. The lignin S/G ratio of the selected P. trichocarpa natural variants showed negative correlations with p-hydroxybenzoate (PB) and ..beta..-5 linkage contents, while it had positive ones with ..beta..-O-4 linkage, lignin molecular weight, and ethanol production. This study showed the importance of lignin S/G ratio as an independent recalcitrance factor that may aid future energy crop engineering and biomass conversion strategies.

09 BIOMASS FUELS↗

Experimental studies of di-jet survival and surface emission bias in Au+Au collisions via angular correlations with respect to back-to-back leading hadrons

We report first results from an analysis based on a new multi-hadron correlation technique, exploring jet-medium interactions and di-jet surface emission bias at the BNL Relativistic Heavy Ion Collider (RHIC). Pairs of back-to-back high-transverse-momentum hadrons are used for triggers to study associated hadron distributions. In contrast with two- and three-particle correlations with a single trigger with similar kinematic selections, the associated hadron distribution of both trigger sides reveals no modification in either relative pseudorapidity {Delta}{eta} or relative azimuthal angle {Delta}{phi} from d+Au to central Au+Au collisions. We determine associated hadron yields and spectra as well as production rates for such correlated back-to-back triggers to gain additional insights on medium properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Enhanced hydrogenation and reduced lattice distortion in size selected Pd-Ag and Pd-Cu alloy nanoparticles

Important correlation between valence band spectra and hydrogenation properties in Pd alloy nanoparticles is established by studying the properties of size selected and monocrystalline Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles. The X-ray photoelectron spectroscopy and elastic recoil detection analysis show that size induced Pd4d centroid shift is related to enhanced hydrogenation with H/Pd ratio of 0.57 and 0.49 in Pd-Ag and Pd-Cu nanoparticles in comparison to reported bulk values of 0.2 and 0.1, respectively. Pd-alloy nanoparticles show lower hydrogen induced lattice distortion. The reduced distortion and higher hydrogen reactivity of Pd-alloy nanoparticles is important for numerous hydrogen related applications.

36 MATERIALS SCIENCE↗

Gamma-ray bursts, supernovae Ia, and baryon acoustic oscillations: A binned cosmological analysis

Abstract Cosmological probes at any redshift are necessary to reconstruct consistently the cosmic history. Studying properly the tension on the Hubble constant, H0, obtained by supernovae type Ia (SNe Ia) and the Planck measurements of the cosmic microwave background radiation would require complete samples of distance indicators at any epoch. Gamma-ray bursts (GRBs) are necessary for the aforementioned task because of their huge luminosity that allows us to extend the cosmic ladder to very high redshifts. However, using GRBs alone as standard candles is challenging, because their luminosity varies widely. To this end, we choose a reliable correlation for GRBs with a very small intrinsic scatter: the so-called fundamental plane correlation for GRB afterglows corrected for selection biases and redshift evolution. We choose a well defined sample: the platinum sample, composed of 50 long GRBs. To further constrain the cosmological parameters, we use baryon acoustic oscillations (BAOs) given their reliability as standard rulers. Thus, we have applied GRBs, SNe Ia, and BAOs in a binned analysis in redshifts so that the GRB contribution is fully included in the last redshift bin, which reaches z = 5. We use the fundamental plane correlation (also known as the 3D Dainotti relation), together with SNe Ia and BAOs, to constrain H0 and the density matter today, ΩM. This methodology allows us to assess the role of GRBs combined with SNe Ia and BAOs. We have obtained results for H0 and ΩM using GRBs+SNe Ia+BAOs with better precision than SNe Ia alone for every bin, thus confirming the beneficial role of BAOs and GRBs added together. In addition, consistent results between GRBs+SNe Ia+BAOs are obtained when compared with SNe Ia+BAOs, showing the importance of GRBs since the distance ladder is extended up to z = 5 with a similar precision obtained with other probes without including GRBs.

Dainotti, Maria Giovanna↗

Direct synthesis of furfuryl alcohol from furfural: catalytic performance of monometallic and bimetallic Mo and Ru phosphides

In this work, the catalytic properties of monometallic and bimetallic Ru and Mo phosphides were evaluated for their ability to selectively hydrogenate furfural to furfuryl alcohol. Monometallic MoP showed high selectivity (98%) towards furfuryl alcohol, while RuP and Ru 2 P exhibited lower selectivity at comparable conversion. Bimetallic promotional effects were observed with Ru 1.0 Mo 1.0 P, as the pseudo-first order reaction rate constant for furfural hydrogenation to furfuryl alcohol, k 1 , was at least 5× higher than MoP, RuP, and Ru 2 P, while maintaining a 99% selectivity. Composition-directed catalytic studies of Ru x Mo 2– x P (0.8 < x < 1.2) provided evidence that Ru rich compositions positively influence k 1 , but not the selectivity. The rate constant ratio k 1 /( k 2 + k 3 ) for furfuryl alcohol production compared to methyl furan ( k 2 ) and tetrahyrofurfuryl alcohol ( k 3 ) followed the trend of Ru 1.0 Mo 1.0 P > Ru 1.2 Mo 0.8 P > MoP > Ru 0.8 Mo 1.2 P > RuP > Ru 2 P. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to examine the configuration of adsorbed furfural on the synthesized catalysts, but the results were inconclusive and no correlation could be found with the selectivity due to the possible IR inactive surface modes with furfural adsorption. However, gas phase density functional theory calculations suggested the x = 1.0 material in Ru x Mo 2– x P (0.8 < x < 1.2) had the most favorable furfural adsorption energy. Experimentally, we also observed that the solvent greatly influenced both the conversion and selectivity, where isopropanol provided the highest selectivity to furfuryl alcohol. Finally, recycling experiments showed a 12% decrease in k 1 after 3 cycles without any regeneration, but the activity could be fully recovered through a re-reduction step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating binding energies of adsorbed CO and H on model surfaces with CO/H 2 selectivity from co-electrolysis of CO 2 and H 2 O over copper–palladium bimetallic catalysts

Binding energies of adsorbed CO and H are key descriptors governing the activity and selectivity of the co-electrolysis of CO 2 and H 2 O to produce syngas with desired CO/H 2 ratios. Palladium hydride (PdH), which forms in situ at negative overpotentials, has been identified as the active Pd phase for CO 2 reduction to syngas. Herein, binding energies of CO and H are determined using temperature programmed desorption (TPD) of CO and H 2 from Pd(111), PdH/Pd(111), and Cu/PdH/Pd(111) under ultra-high vacuum (UHV) conditions. TPD results reveal that desorption of H 2 from subsurface PdH occurs at 460 K, while desorption from surface PdH is more facile at 320 K. CO desorption temperatures shift 20 K lower on PdH/Pd(111) compared to on Pd(111). The presence of 0.7 ML Cu further increases the desorption temperature of H 2 by 30 K while simultaneously reducing CO desorption temperatures by 70 K. Density functional theory (DFT) calculations show that CO adsorption onto Pd sites is hindered on the 0.7 ML Cu/PdH/Pd(111) surface while the kinetic barrier for H 2 desorption is increased. The trends in the binding energies of CO and H on model surfaces are consistent with electrochemical measurements of CuPd powder catalysts in a membrane electrode assembly (MEA), where H 2 evolution is reduced while CO production is enhanced compared to unmodified Pd catalysts. Overall, the results from model surface studies (TPD and DFT) provide a prediction and explanation for the activity and CO/H 2 ratios observed in electrochemical experiments. This study also demonstrates that CuPd is a promising catalyst with reduced Pd-loading to produce CO-rich syngas.

36 MATERIALS SCIENCE↗

Parameters and abundances in luminous stars

Parameters and abundances for 451 stars of spectral types F, G, and K of luminosity classes I and II have been derived. Absolute magnitudes and E(B – V) have been derived for the warmer stars in order to investigate the galactic abundance gradient. The value found here: d[Fe/H]/dR ∼ –0.06 dex kpc{sup –1}, agrees well with previous determinations. Stellar evolution indicators have also been investigated with the derived C/O ratios indicating that standard CN processing has been operating. Perhaps the most surprising result found in these supposedly relatively young intermediate-mass stars is that both [O/Fe] and [C/Fe] show a correlation with [Fe/H] much the same as found in older populations. While the stars were selected based on luminosity class, there does exist a significant [Fe/H] range in the sample. The likely explanation of this is that there is a significant range in age in the sample; that is, some of the sample are low-mass red-giant stars with types that place them within the selection criteria.

79 ASTRONOMY AND ASTROPHYSICS↗

Nuclear-electronic orbital reduced explicitly correlated Hartree-Fock approach: Restricted basis sets and open-shell systems

The nuclear electronic orbital (NEO) reduced explicitly correlated Hartree-Fock (RXCHF) approach couples select electronic orbitals to the nuclear orbital via Gaussian-type geminal functions. This approach is extended to enable the use of a restricted basis set for the explicitly correlated electronic orbitals and an open-shell treatment for the other electronic orbitals. The working equations are derived and the implementation is discussed for both extensions. The RXCHF method with a restricted basis set is applied to HCN and FHF{sup −} and is shown to agree quantitatively with results from RXCHF calculations with a full basis set. The number of many-particle integrals that must be calculated for these two molecules is reduced by over an order of magnitude with essentially no loss in accuracy, and the reduction factor will increase substantially for larger systems. Typically, the computational cost of RXCHF calculations with restricted basis sets will scale in terms of the number of basis functions centered on the quantum nucleus and the covalently bonded neighbor(s). In addition, the RXCHF method with an odd number of electrons that are not explicitly correlated to the nuclear orbital is implemented using a restricted open-shell formalism for these electrons. This method is applied to HCN{sup +}, and the nuclear densities are in qualitative agreement with grid-based calculations. Future work will focus on the significance of nonadiabatic effects in molecular systems and the further enhancement of the NEO-RXCHF approach to accurately describe such effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Rhodium Complexes Supported on the Metal-Oxide-Like Nodes of Metal Organic Frameworks and on Zeolite HY: Catalysts for Ethylene Hydrogenation and Dimerization

Metal–organic frameworks (MOFs) with nodes consisting of zirconium oxide clusters (Zr 6 ) offer new opportunities as supports for catalysts with well-defined, essentially molecular, structures. We used the precursor Rh(C 2 H 4 ) 2 (acac) (acac is acetylacetonate) to anchor Rh(I) complexes to the nodes of the MOF UiO-67 and, for comparison, to the zeolite dealuminated HY (DAY). These were characterized experimentally by measurement of catalytic activities and selectivities for ethylene hydrogenation and dimerization in a once-through flow reactor at 298 K and 1 bar. The catalyst performance data are complemented with structural information determined by infrared and extended X-ray absorption fine structure spectroscopies and by calculations at the level of density functional theory, the latter carried out also to extend the investigation to a related MOF, NU-1000. The agreement between the experimental and calculated structural metrics is good, and the calculations have led to predictions of reaction mechanisms and associated energetics. Finally, the data demonstrate a correlation between the catalytic activity and selectivity and the electron-donor tendency of the supported rhodium (as measured by the frequencies of CO ligands bonded as probes to the Rh(I) centers), which is itself a measure of the electron-donor tendency of the support.

36 MATERIALS SCIENCE↗

Application of high-energy x-rays and pair-distribution-function analysis to nano-scale structural studies in catalysis.

We investigate the structure of supported Pt catalysts using high-energy X-ray scattering coupled with Pair-Distribution-Function (PDF) analysis. Recently, experimental approaches that enable the collection of PDF data in situ have been developed with time-resolution sufficient to study the structure of Pt nano-particles as they form. The differential PDF approach is utilized which allows the atom-atom correlations involving only Pt to be selectively recovered, enabling structural investigation of the supported particles and the mechanism of their formation. In parallel to the in situ analysis, we have examined samples prepared ex situ. Data collected on the ex situ samples show that the initial deposition of Pt{sup 4+} occurs as the PtCl{sub 6}{sup 2-} species which are retained even when annealed in an oxygen atmosphere. The Pt differential PDFs of the samples reduced in hydrogen at 200 and 500 C indicated nano-crystalline face-centered-cubic (fcc) metallic Pt particles. The ex situ reduced samples also contain a weak correlations at 2.1 {angstrom}, which we assign to Pt-O interactions between the particles and the support surface. The in situ experiments, following the reduction of Pt{sup 4+} from 0 to 227 C, indicate that the initial Pt nano-particles formed are ca. 1 nm in size, and become larger and more crystalline by 200 C. The data suggest a particle growth mechanism where the initial particles that form are small (<1 nm), then agglomerate into ensembles of many small particles and lastly anneal to form larger well-ordered particles. Lastly, we discus potential future developments in operando PDF studies, and identify opportunities for synchronous application of complementary methods.

08 HYDROGEN↗

Orbital selective Kondo effect in heavy fermion superconductor UTe2

Abstract Heavy fermion systems emerge from the collective Kondo effect, and their superconductivity can serve as a promising platform for realizing next-generation quantum technologies. However, it has been a great challenge to explore many-body effects in heavy fermion systems with ab-initio approaches. We computed the electronic structure of UTe 2 without purposive judgements, such as intentional selection of on-site Coulomb interaction and disregarding spin-orbit coupling. We show that U-5 f electrons are highly localized in the paramagnetic normal state, giving rise to the Kondo effect. It is also found that the hybridization between U-5 f and U-6 d predominantly in the orthorhombic a b -plane is responsible for the high-temperature Kondo effect. In contrast, the hybridization between U-5 f and Te-5 p along the c -axis manifests the Kondo scattering at a much lower temperature, which could be responsible for the low-temperature upturn of the c -axis resistivity. Our results show that the electron correlation in UTe 2 is orbital selective, which naturally elucidates the recent experimental observations of anomalous temperature dependence of resistivity. Furthermore, we suggest that the Kondo effect is suppressed at high pressure owing to weak localization of magnetic moments, which results from enhanced U-5 f electron hopping. Our discovery provides significant insight toward understanding anisotropic quantum behavior including selective re-entrant superconductivity in heavy fermion UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial density fluctuations and selection effects in galaxy redshift surveys

One of the main problems of observational cosmology is to determine the range in which a reliable measurement of galaxy correlations is possible. This corresponds to determining the shape of the correlation function, its possible evolution with redshift and the size and amplitude of large scale structures. Different selection effects, inevitably entering in any observation, introduce important constraints in the measurement of correlations. In the context of galaxy redshift surveys selection effects can be caused by observational techniques and strategies and by implicit assumptions used in the data analysis. Generally all these effects are taken into account by using pair-counting algorithms to measure two-point correlations. We review these methods stressing that they are based on the a-priori assumption that galaxy distribution is spatially homogeneous inside a given sample. We show that, when this assumption is not satisfied by the data, results of the correlation analysis are affected by finite size effects. In order to quantify these effects, we introduce a new method based on the computation of the gradient of galaxy counts along tiny cylinders. We show, by using artificial homogeneous and inhomogeneous point distributions, that this method identifies redshift dependent selection effects and disentangles them from the presence of large scale density fluctuations. We then apply this new method to several redshift catalogs and we find evidence that galaxy distribution, in those samples where selection effects are small enough, is characterized by power-law correlations with exponent γ=0.9 up to 20 Mpc/h followed by a change of slope that, in the range 20–100 Mpc/h, corresponds to a power-law exponent γ=0.25. Whether a crossover to spatial uniformity occurs at ∼ 100 Mpc/h or larger scales cannot be clarified by the present data.

79 ASTRONOMY AND ASTROPHYSICS↗

THE RELATION BETWEEN AGN GAMMA-RAY EMISSION AND PARSEC-SCALE RADIO JETS

We have compared the radio emission from a sample of parsec-scale active galactic nucleus (AGN) jets as measured by the VLBA at 15 GHz, with their associated {gamma}-ray properties that are reported in the Fermi Large Area Telescope (LAT) three month bright source list. We find in our radio-selected sample that the {gamma}-ray photon flux correlates well with the quasi-simultaneously measured compact radio flux density. The LAT-detected jets in our radio-selected complete sample generally have higher compact radio flux densities, and their parsec-scale cores are brighter (i.e., have higher brightness temperature) than the jets in the LAT nondetected objects. This suggests that the jets of bright {gamma}-ray AGN have preferentially higher Doppler-boosting factors. In addition, AGN jets tend to be found in a more active radio state within several months from LAT-detection of their strong {gamma}-ray emission. This result becomes more pronounced for confirmed {gamma}-ray flaring sources. We identify the parsec-scale radio core as a likely location for both the {gamma}-ray and radio flares, which appear within typical timescales of up to a few months of each other.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamic restructuring drives catalytic activity on nanoporous gold–silver alloy catalysts

Bimetallic, nanostructured materials hold promise for improving catalyst activity and selectivity, yet little is known about the dynamic compositional and structural changes that these systems undergo during pretreatment that leads to efficient catalyst function. Here we use ozone-activated silver–gold alloys in the form of nanoporous gold as a case study to demonstrate the dynamic behaviour of bimetallic systems during activation to produce a functioning catalyst. We show that it is these dynamic changes that give rise to the observed catalytic activity. Advanced in situ electron microscopy and X-ray photoelectron spectroscopy are used to demonstrate that major restructuring and compositional changes occur along the path to catalytic function for selective alcohol oxidation. Transient kinetic measurements correlate the restructuring to three types of oxygen on the surface. The direct influence of changes in surface silver concentration and restructuring at the nanoscale on oxidation activity is demonstrated. Finally, our results demonstrate that characterization of these dynamic changes is necessary to unlock the full potential of bimetallic catalytic materials.

36 MATERIALS SCIENCE↗

Advancements in Constitutive Model Calibration: Leveraging the Power of Full‐Field DIC Measurements and In Situ Load Path Selection for Reliable Parameter Inference

Accurate material characterization and model calibration are essential for computationally supported high-consequence engineering decisions. Historically, characterization and calibration methods (1) use simplified test specimen geometries and global data, (2) cannot guarantee that sufficient characterization data are collected for a specific model of interest, (3) use deterministic methods that provide best-fit parameter values with no uncertainty quantification, and (4) are sequential, inflexible, and time-consuming. This work brings together several recent advancements into an improved workflow called interlaced characterization and calibration (ICC) that advances the state-of-the-art in constitutive model calibration. The ICC paradigm (1) employs tools to efficiently use full-field data to calibrate high-fidelity material models, (2) aligns the data needed with the data collected by adopting an optimal experimental design protocol, (3) quantifies parameter uncertainty through Bayesian inference and (4) incorporates these advancements into a quasi real-time feedback loop. The ICC framework is demonstrated here on the calibration of a material model using simulated full-field data for an aluminium cruciform specimen being deformed biaxially. The cruciform is actively driven through the myopically preferred load path using Bayesian optimal experimental design, which selects load steps that yield the maximum expected information gain (EIG). Principal component analysis (PCA) is performed on the model predictions of full-field displacements, and fast surrogate models are built to approximate the input-output relationships of the expensive finite element model. Furthermore, the tools developed and demonstrated here show that high-fidelity constitutive models can be efficiently and reliably calibrated with quantified uncertainty, thus supporting credible decision-making and potentially increasing the agility of solid mechanics modelling by enabling utilization of computational simulations at earlier stages of the design cycle.

Bayesian optimal experimental design↗

Natural Indices for the Chemical Hardness/Softness of Metal Cations and Ligands

Quantitative understanding of reactivity and stability for a chemical species is fundamental to chemistry. The concept has undergone many changes and additions throughout the history of chemistry, stemming from the ideas such as Lewis acids and bases. For a given complexing ligand (Lewis base) and a group of isovalent metal cations (Lewis acids), the stability constants of metal–ligand (ML) complexes can simply correlate to the known properties of metal ions [ionic radii (r Mn+ ), Gibbs free energy of formation (ΔG° f,Mn+ ), and solvation energy (ΔG° s,Mn+ )] by 2.303RT log K ML = (α* ML ΔG° f,Mn+ – β* ML r M n+ + γ* ML ΔG° s,M n+ – δ* ML ), where the coefficients (α* ML , β* ML , γ* ML , and intercept δ* ML ) are determined by fitting the equation to the existing experimental data. Coefficients β* ML and γ* ML have the same sign and are in a linear relationship through the origin. Gibbs free energies of formation of cations (ΔG° f,M n+ ) are found to be natural indices for the softness or hardness of metal cations, with positive values corresponding to soft acids and negative values to hard acids. The coefficient α* ML is an index for the softness or hardness of a complexing ligand. Proton (H + ) with the softness index of zero is a unique acid that has strong interactions with both soft and hard bases. The stability energy resulting from the acid–base interactions is determined by the term α* ML ΔG° f,M n+ ; a positive product of α* ML and ΔG° f,M n+ indicates that the acid–base interaction between the metal cation and the complexing ligand stabilizes the complex. The terms β* ML r M n+ and γ* ML ΔG° s,M n+ , which are related to ionic radii of metal cations, represent the steric and solvation effects of the cations. The new softness indices proposed here will help to understand the interactions of ligands (Lewis bases) with metal cations (Lewis acids) and provide guidelines for engineering materials with desired chemical reactivity and selectivity. As a result, the new correlation can also enhance our ability for predicting the speciation, mobility, and toxicity of heavy metals in the earth environments and biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗