Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation loops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Ion beam synthesis of ZrC{sub x}O{sub y} nanoparticles in cubic zirconia

{110}-oriented yttria-stabilized zirconia single crystals have been implanted with low-energy C ions in an axial direction, at room temperature and at 550 °C. Room temperature ion implantation generated a damage layer that contains the expected dislocation loop clusters. Strikingly, the high temperature implantation produced zirconium oxycarbide nanoparticles (ZrC{sub x}O{sub y}) at a shallow depth in the yttria-stabilized cubic zirconia crystal, with a diameter in the range of 4–10 nm. Moreover, in the high concentration region of implanted C ions, between 100 and 150 nm below the surface, a number of large precipitates, up to 20 nm, were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamic and morphological analysis of large silicon self-interstitial clusters using atomistic simulations

We study computationally the formation of thermodynamics and morphology of silicon self-interstitial clusters using a suite of methods driven by a recent parameterization of the Tersoff empirical potential. Formation free energies and cluster capture zones are computed across a wide range of cluster sizes (2 < N{sub i} < 150) and temperatures (0.65 < T/T{sub m} < 1). Self-interstitial clusters above a critical size (N{sub i} ∼ 25) are found to exhibit complex morphological behavior in which clusters can assume either a variety of disordered, three-dimensional configurations, or one of two macroscopically distinct planar configurations. The latter correspond to the well-known Frank and perfect dislocation loops observed experimentally in ion-implanted silicon. The relative importance of the different cluster morphologies is a function of cluster size and temperature and is dictated by a balance between energetic and entropic forces. The competition between these thermodynamic forces produces a sharp transition between the three-dimensional and planar configurations, and represents a type of order-disorder transition. By contrast, the smaller state space available to smaller clusters restricts the diversity of possible structures and inhibits this morphological transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deconvoluting the Effect of Chromium and Aluminum on the Radiation Response of Wrought FeCrAl Alloys After Low-Dose Neutron Irradiation

FeCrAl alloys have been extensively investigated over the past decade as a candidate material for accident-tolerant fuel cladding in light water reactors. Here, we have completed a first of its kind study where Al and Cr concentrations are varied systematically under neutron irradiation to elucidate the post irradiation microstructural and mechanical response as a direct result of alloying content. Neutron irradiations were performed on alloys with composition Fe-(10-13)Cr-(5-7)Al in wt.% at temperatures of 214, 357, and 557°C to a dose of ~1.8 dpa (displacements per atom). Dislocation loop sizes and dispersion characteristics did not show strong compositional dependence. However, there were noticeable effects of composition on the dispersion of Cr-rich α'-precipitates, particularly a decrease in number density with increasing Al content or a decrease in Cr content. The present results confirm previous studies indicating the Cr concentration in these precipitates is lower than that expected in binary FeCr alloys and that Al can act as a destabilizing alloying element for the deleterious α'-phase.

36 MATERIALS SCIENCE↗

Structural and cathodoluminescence properties of ZnO nanorods after Ga-implantation and annealing

Single-crystalline ZnO nanorods were implanted with 30 keV Ga{sup +} ions and fluences between 5x10{sup 12} and 1.5x10{sup 16} cm{sup -2}. Annealing treatments at temperatures up to 700 deg. C for 1 h were carried out to reduce implantation-induced structural defects. The structural and optical properties of the nanorods were studied by transmission electron microscopy (TEM) and cathodoluminescence (CL) spectroscopy. TEM shows that extended implantation defects vanish completely in nanorods implanted with doses up to 5x10{sup 13} cm{sup -2} after annealing at 700 deg. C. Dislocation loops remain after implantation with higher fluences. The CL intensity of as-grown nanorods and implanted ZnO nanorods is low. Annealing at 700 deg. C leads to a significant increase in the CL intensity for as-grown nanorods and implanted with a dose of up to 5x10{sup 13} cm{sup -2}. The strong CL intensity in implanted and annealed nanorods correlates with the complete disappearance of extended structural defects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

TEM study of {beta} Prime precipitate interaction mechanisms with dislocations and {beta} Prime interfaces with the aluminium matrix in Al-Mg-Si alloys

The interaction mechanisms between dislocations and semi-coherent, needle-shaped {beta} Prime precipitates in Al-Mg-Si alloys have been studied by High Resolution Transmission Electron Microscopy (HRTEM). Dislocation loops appearing as broad contrast rings around the precipitate cross-sections were identified in the Al matrix. A size dependency of the interaction mechanism was observed; the precipitates were sheared when the longest dimension of their cross-section was shorter than approximately 15 nm, and looped otherwise. A more narrow ring located between the Al matrix and bulk {beta} Prime indicates the presence of a transition interface layer. Together with the bulk {beta} Prime structure, this was further investigated by High Angle Annular Dark Field Scanning TEM (HAADF-STEM). In the bulk {beta} Prime a higher intensity could be correlated with a third of the Si-columns, as predicted from the published structure. The transition layer incorporates Si columns in the same arrangement as in bulk {beta} Prime , although it is structurally distinct from it. The Z-contrast information and arrangement of these Si-columns demonstrate that they are an extension of the Si-network known to structurally connect all the precipitate phases in the Al-Mg-Si(-Cu) system. The width of the interface layer was estimated to about 1 nm. - Highlights: Black-Right-Pointing-Pointer {beta} Prime is found to be looped at sizes larger than 15 nm (cross section diameter). Black-Right-Pointing-Pointer {beta} Prime is found to be sheared at sizes smaller than 15 nm (cross section diameter). Black-Right-Pointing-Pointer The recently determined crystal structure of {beta} Prime is confirmed by HAADF-STEM. Black-Right-Pointing-Pointer Between {beta} Prime and the Al-matrix a transition layer of about 1 nm is existent. Black-Right-Pointing-Pointer The {beta} Prime /matrix layer is structurally distinct from bulk {beta} Prime and the aluminium matrix.

36 MATERIALS SCIENCE↗

Comparison of hardening and microstructures of ferritic/martensitic steels irradiated with fast neutrons and dual ions

Ferritic/martensitic steels T91 and HT9 were irradiated with neutrons (BOR-60 reactor) and dual ions (9 MeV Fe 3+ and 3.42 MeV energy degraded He 2+ ) from 369 to 520 °C and damage levels of 16.6 to 72 dpa to quantify the possibility of using ion irradiation to simulate neutron irradiation in terms of microstructures and mechanical properties. Nanoindentation testing was performed to obtain the bulk equivalent hardness of the dual-ion irradiated samples. For the neutron irradiated samples, both nanoindentation and Vickers hardness testing were conducted. Transmission Electron Microscopy (TEM) characterizations of the cavities, dislocation loops and precipitates were conducted to account for the strengthening contribution of each microstructure element. The good agreement between the microstructure-predicted (dispersed barrier hardening) and measured strength of the irradiated specimens demonstrated the accuracy of the strengthening model and the nanoindentation tests. Furthermore, the comparison of mechanical property and microstructure changes in ion and neutron irradiated structural materials indicated that ion irradiation replicated many neutron irradiation features. However, a single 70 °C temperature shift is insufficient to match all complex microstructures of neutron vs. ion irradiation over the irradiation temperature range of 369–520 °C.

36 MATERIALS SCIENCE↗

Radiation tolerance of neutron-irradiated model Fe-Cr-Al alloys

The Fe Cr Al alloy system has the potential to form an important class of enhanced accident-tolerant cladding materials in the nuclear power industry owing to the alloy system's higher oxidation resistance in high-temperature steam environments compared with traditional zirconium-based alloys. However, radiation tolerance of Fe Cr Al alloys has not been fully established. In this study, a series of Fe Cr Al alloys with 10 18 wt % Cr and 2.9 4.9 wt % Al were neutron irradiated at 382 C to 1.8 dpa to investigate the irradiation-induced microstructural and mechanical property evolution as a function of alloy composition. Dislocation loops with Burgers vector of a/2 111 and a 100 were detected and quantified. Results indicate precipitation of Cr-rich is primarily dependent on the bulk chromium composition. Mechanical testing of sub-size-irradiated tensile specimens indicates the hardening response seen after irradiation is dependent on the bulk chromium composition. Furthermore, a structure property relationship was developed; it indicated that the change in yield strength after irradiation is caused by the formation of these radiation-induced defects and is dominated by the large number density of Cr-rich α' precipitates at sufficiently high chromium contents after irradiation.

36 MATERIALS SCIENCE↗

Comparison of Deuterium Retention for Ion-irradiated and Neutron-irradiated Tungsten

The behavior of D retention for Fe{sup 2+}-irradiated tungsten with a damage of 0.025-3 dpa was compared with that for neutron-irradiated tungsten with 0.025 dpa. The D{sub 2} thermal desorption spectroscopy (TDS) spectra for Fe{sup 2+}-irradiated tungsten consisted of two desorption stages at 450 and 550 K, while that for neutron-irradiated tungsten was composed of three stages and an addition desorption stage was found at 750 K. The desorption rate of the major desorption stage at 550K increased as the displacement damage increased due to Fe{sup 2+} irradiation increasing. In addition, the first desorption stage at 450K was found only for damaged samples. Therefore, the second stage would be based on intrinsic defects or vacancy produced by Fe{sup 2+} irradiation, and the first stage should be the accumulation of D in mono-vacancy and the activation energy would be relatively reduced, where the dislocation loop and vacancy is produced. The third one was found only for neutron irradiation, showing the D trapping by a void or vacancy cluster, and the diffusion effect is also contributed to by the high full-width at half-maximum of the TDS spectrum. Therefore, it can be said that the D{sub 2} TDS spectra for Fe{sup 2+}-irradiated tungsten cannot represent that for the neutron-irradiated one, indicating that the deuterium trapping and desorption mechanism for neutron-irradiated tungsten is different from that for the ion-irradiated one.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of Ion and Neutron Irradiations to 3 dpa at 500 deg. C in Ferritic-Martensitic Alloys

The growing global demand for energy will increasingly call upon advanced nuclear fission reactors to supply safe and reliable electricity. The structural and fuel cladding components of these reactors will be subject to extreme conditions of irradiation damage up to several hundred displacements per atom (dpa) at temperatures as high as 700 deg. C. Ferritic-martensitic (F-M) steels are leading candidates for these challenging conditions due to their strength and dimensional stability under irradiation. In order to accelerate the process for evaluating F-M alloys, charged particles are increasingly being used to emulate neutron irradiations. Charged particle irradiations allow the possibility of conducting irradiation experiments within a shorter time period (i.e. at a rate up to 4 orders of magnitude faster) and with minimal radioactivation of the material, enabling lower cost and faster turnaround of post irradiation examination and analysis. However, the irradiation dose rate, damage cascade morphologies, and irradiation damage depth profiles all differ widely between protons, heavier ions, and neutrons. Currently, there is limited understanding of the significance of these physical differences and how they manifest in the irradiated microstructure and mechanical properties of F-M steels. The objective of this study is to evaluate charged particles as a surrogate for neutron irradiations in F-M alloys by assessing common irradiation conditions using Fe{sup ++} ions, protons, and neutrons. Keeping the temperature and dose consistent enables isolation of the effects of each irradiating particle and their respective dose rates and cascade morphologies. Specimens of HCM12A and HT9 were irradiated separately with protons, self-ions, and neutrons to a common dose of 3 dpa at 500 deg. C. The microstructure of each specimen was characterized with TEM and LEAP and compared to evaluate proton and self-ion irradiation as a surrogate for neutron irradiation at these conditions. - Proton, self-ion, and neutron irradiations produced consistent sizes and number densities of grains, carbides, dislocation lines, and dislocation loops. Voids were absent in all conditions. The charged particle irradiations have successfully reproduced the neutron irradiation results for these microstructural features without a temperature shift. - Nano-cluster evolution of Si-Mn-Ni-P and Cu-rich clusters was markedly different for each irradiating particle type. Some cluster morphology trends could be explained by differences in cascade volume for differing irradiating species. But dose rate likely also influences cluster evolution. - Cr-rich nanoclusters nucleated only in the neutron-irradiated HCM12A and HT9. This is likely due to thermal aging at 500 deg. C over a longer experimental time, as compared to the proton and self-ion irradiations. (authors)

36 MATERIALS SCIENCE↗

Dynamical theoretical model of the high-resolution double-crystal x-ray diffractometry of imperfect single crystals with microdefects

The dynamical diffraction model has been developed for the quantitative description of rocking curves (RCs) measured in the Bragg diffraction geometry from single crystals containing homogeneously distributed microdefects of several types and with arbitrary sizes. The analytical expressions for coherent and diffuse RC components, which take self-consistently multiple-scattering effects into account and depend explicitly on microdefect characteristics (radius, concentration, strength, etc.), have been derived with taking into account the instrumental factors. The developed model has been applied to determine the characteristics of oxygen precipitates and dislocation loops in silicon crystals grown by Czochralsky and float-zone methods using RCs measured by the high-resolution double-crystal x-ray diffractometer. It has been shown, particularly, that completely dynamical consideration of Huang as well as Stockes-Wilson diffuse scattering (DS) in both diffuse RC component and coefficient of extinction of coherent RC component due to DS, together with taking asymmetry and thermal DS effects into account, provides the possibility to distinguish contributions into RC from defects of different types, which have equal or commensurable effective radii.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850 °C: Damage micromechanisms

Highlights: • Isothermal LCF life of CM 247 DS is reduced using R = 0 instead of R = −1. • Reduction in LCF life is significant at lower values of Δε/2. • Reduction in fatigue life is attributed to the development of sustained mean stress. • Sustained mean stress prevents the slip transfer from γ-channels to γ′-precipitates. • Sustained mean stress promotes dislocation network formation and looping. - Abstract: Dislocation based deformation micromechanisms during low cycle fatigue deformation of nickel base superalloy CM 247 DS LC at 850 °C was investigated by conducting fatigue tests employing constant strain amplitudes for strain ratio (R) values of 0, −1 and carrying out extensive SEM and TEM examinations. Cyclic life of the alloy reduces for all fatigue tests conducted employing R = 0 in comparison with R = −1 owing to sustained mean stress developed during fatigue at R = 0. TEM examinations confirmed that sustained mean stress developed during low strain amplitude fatigue test (Δε/2 = 0.5%) using R = 0 condition prevented slip transfer from γ-channels to γ′-precipitates and resulted in the formation of dislocation substructures such as networks, nodes etc. and also promoted dislocation looping around γ′-precipitates. Lower fatigue life at R = 0 is mainly attributed to the development of these types of substructures, which promotes strain localization in both intra as well intergranular regions. Whereas, in specimen fatigue tested (Δε/2 = 0.5%) using R = −1 condition, shearing of γ′-precipitates by APB coupled dislocation and formation of stacking faults were observed. The formation and nature of stacking faults were analysed using weak beam imaging technique. Stacking fault formed during fatigue tests using R = −1 condition matured to micro-twins when Δε/2 value was increased to 0.8%. The mechanism of formation of these microtwins is discussed in detail. SEM based microstructural and fractographic examinations revealed that mean stress induced creep effect resulted in intergranular crack initiation and grain boundary cavitation during fatigue tests under R = 0 condition and therefore verified the facts revealed in TEM studies.

36 MATERIALS SCIENCE↗

In-situ TEM and ion iradiation of ferritic materials.

The intermediate voltage electron microscope-tandem user facility in the Electron Microscopy Center at Argonne National Laboratory is described. The primary purpose of this facility is electron microscopy with in situ ion irradiation at controlled sample temperatures. To illustrate its capabilities and advantages a few results of two outside user projects are presented. The motion of dislocation loops formed during ion irradiation is illustrated in video data that reveals a striking reduction of motion in Fe-8%Cr over that in pure Fe. The development of extended defect structure is then shown to depend on this motion and the influence of nearby surfaces in the transmission electron microscopy thin samples. In a second project, the damage microstructure is followed to high dose (200 dpa) in an oxide dispersion strengthened ferritic alloy at 500 C, and found to be qualitatively similar to that observed in the same alloy neutron irradiated at 420 C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Defect-specific strength factors and superposition model for predicting strengthening of ion irradiated Fe18Cr alloy

Here, a high-purity binary alloy Fe18Cr was subjected to heavy-ion irradiation in order to provide improved understanding of the irradiation effect on radiation hardening associated with dislocation loop and network formation, α’ precipitation. The specimens were irradiated with 8 MeV Fe ions (~2 μm ion range) to midrange doses of 0.37 and 3.7 dpa at 300, 350 and 450 °C using dose rates of ~10 –5 –10 –3 dpa/s. Nanoindentation testing was performed to extract the bulk equivalent hardness at low depth from these ion irradiated specimens. High-quality transmission electron microscopy (TEM) images were acquired by utilizing a flash electropolishing method on the Focused Ion Beam (FIB) prepared liftouts. An accurate calculation of the strength factor was provided based on detailed TEM characterization of the irradiated microstructures. A newly refined hardening superposition method was applied to combine the strengthening components from each microstructure. The good agreement between microstructure predicted strength and measured strength further demonstrated the fidelity to use hardening model to quantify the mechanical properties of ion irradiated materials.

36 MATERIALS SCIENCE↗

Nucleation Mechanism of Dislocation Half-Loop Arrays in 4H-Silicon Carbide Homo-Epitaxial Layers

A model is presented for the formation mechanism of dislocation half-loop arrays formed during the homoepitaxial growth of 4H-SiC. The reorientation during glide of originally screw oriented threading segments of basal plane dislocation (BPD) renders them susceptible to conversion into sessile threading edge dislocations (TEDs), which subsequently pin the motion of the BPD. Continued glide during further growth enables parts of the mobile BPD to escape through the surface leaving arrays of half loops comprising two TEDs and a short BPD segment with significant edge component. The faulting behavior of the arrays under UV excitation is consistent with this model.

36 MATERIALS SCIENCE↗

Crystal defects and related stress in Y{sub 2}O{sub 3} thin films: Origin, modeling, and consequence on the stability of the C-type structure

We study the impact that the crystal defects have on the C-type structure of rare earth sesquioxide thin films grown by ion-beam sputtering, through the example of Y{sub 2}O{sub 3}. By monitoring the energy of the argon beam used in the sputter deposition process (between 600 and 1200 eV), we show that it is possible to control the microstructure (defects concentration, stress state and phase) in the oxide layer. Two main types of defects, ascribed to the 'atomic peening effect', are evidenced by high-resolution transmission electron microscopy, Rutherford backscattering spectroscopy, and nuclear reaction analysis experiments: anti-Frenkel pairs, leading to a disorder on the oxygen-vacancy network, and oxygen-vacancy dislocations loops, to accommodate the strong nonstoichiometry. From a macroscopic measurement of the residual stresses in the as-deposited and the annealed layers, through x-ray diffraction and the sin{sup 2}{Psi} method, we have modeled the related stress state using an enhanced triaxial stress model. In the as-grown films, we evidence the coexistence of a biaxial and a hydrostatic stress, due to inclusions of atomic size defects. Quantitative information of the concentration and the nature of each type of defect (size effect) have also been determined, in good agreement with experiments. Interestingly, in the most energetic growth conditions corresponding to the highest degree of disorder on the oxygen-vacancy network and to the highest stress field in the film, we demonstrate that it is possible to stabilize an unexpected and metastable non equilibrium fluorite-like phase (X-type).

36 MATERIALS SCIENCE↗

Radiation damage in heteroepitaxial BaTiO{sub 3} thin films on SrTiO{sub 3} under Ne ion irradiation

The microstructure evolution of heteroepitaxial BaTiO{sub 3} (BTO) thin films grown on single crystal (001) SrTiO{sub 3} (STO) under Ne irradiation at room temperature was systematically investigated with special attention given to the behavior at the BTO/STO interface. Cross sectional transmission electron microscope investigations reveal that amorphization occurs at the top BTO film region. BTO grains in the dimensions of 10-20 nm survived the irradiation damage and maintained their original crystal orientation. Other irradiation-induced defects such as dislocation loops and defect clusters were observed only at the portion of the BTO thin film near the interface, but not at the STO side of the bilayer. Atomic calculations find that the energetics of defects are very similar on each side of the BTO/STO interface, suggesting that the interface will not significantly modify radiation damage evolution in this system, in agreement with the experimental observations. These results support the hypothesis we presented in previous work about the role of coherent interfaces on radiation damage evolution.

36 MATERIALS SCIENCE↗

Equivalent radiation damage in zirconium irradiated in various reactors - 2016-0101

The physical properties and in-reactor performance of core components made from zirconium alloys are a function of the radiation-induced atomic displacements that occur during service. The vacancy and interstitial point defects and their clusters created by the atomic displacements modify the microstructure, and therefore physical properties such as strength and ductility, by forming dislocation loops. The rate of production of point defects also affects time-dependent properties such as creep and diffusion (mass transport). To simulate the effect of irradiation on core components, researchers have used materials test reactors for many years to irradiate and test materials. Such reactor tests can target an accumulated displacement damage dose to simulate the state of a material at a given stage in reactor life but at an accelerated rate. Each nuclear reactor has a specific neutron energy spectrum that also depends on the in-reactor location. Therefore, to use test reactor data to determine the effect of radiation damage on power reactor materials, one must convert the accumulated dose into a unit that is common in its effect on the material properties. For many property changes in nuclear reactor cores, this unit is displacements per atom. This paper compares the damage production for zirconium irradiated under differing neutron energy spectra in various power and test reactors. The damage rates as a function of different measures of neutron flux were used to relate atomic displacements in various materials test reactors to CANDU and light-water reactor conditions. (authors)

36 MATERIALS SCIENCE↗

Topological Defects in Graphite under Irradiation using Molecular Dynamics

Graphite is the preferred material for moderating elements and structural components in a Very High Temperature Reactor (VHTR). It has a layered structure with basal planes constituted by carbon atoms arranged in a hexagonal lattice. Graphite accommodates a wide variety of defects such as vacancies, interstitials, and dislocation loops; a detailed description can be found in a review paper by Telling and Heggie. The layered configuration in graphite engenders energetic conditions that favor the formation of topological defects. Unlike the interlayer defects, which often are sp{sup 3} hybridized, topological defects maintain their sp{sup 2} bond connectivity. Several types of topological defects are known to arise in graphite; one of the most recognizable defects corresponds to a 5-7 Stone-Wales (SW) configuration that arises by a simple rotation of bonds. While the bond rotations result in a defected configuration, each carbon atom is still bonded to three other carbon atoms in the SW configuration, albeit with different bond lengths. Topological defects are expected to arise in irradiated graphite. A recent investigation with Raman and XPS spectroscopy have concluded that a large number of such defects are generated under neutron irradiation; an earlier ab-initio investigation has also arrived at the same conclusion. While several molecular dynamics (MD) simulations have been reported on irradiated graphite in the past, none have characterized the evolution of defects that are topological in nature. Using MD simulations, the current investigation quantifies the evolution and the distribution of topological defects under irradiation. Using MD simulations, we establish the presence of 5 and 7 membered topological defects in graphite following radiation. There is a greater probability for the formation of a 7 member ring relative to that of a 5 member ring. Since a heptagon causes a lower distortion to the 120 deg. bond angle of the sp{sup 2} hybridized orbital than a pentagon it is plausible to expect a larger number of 7 member rings following a radiation perturbation. Using a spatial distribution analysis, we have verified that 7 member rings tend to stay adjacent to 5 member rings as in Stone-Wales (SW) configuration. Since there are unequal number of 5 and 7 member rings, it follows that there are several isolated 7 member topological defects in graphite following radiation, possibly connected to dangling bonds or non-planar (sp{sup 3}) defects.

36 MATERIALS SCIENCE↗