Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

An integration scheme to determine the dynamic response of a launch vehicle with several payloads

The coupled equations of motion of a system composed of a launch vehicle and multiple payloads are derived. In the process, it is shown how superfluous interface degrees of freedom on the booster side can be accommodated in the formulation. The discrete system equations are directly integrated, avoiding the solution of an expensive system eigenvalue problem. A modified Newmark-Chan-Beta numerical integration scheme is used to obtain the response. The unique form of the equations of motion allow for a quick and accurate solution both for the response and the internal loads. Although completely general, the presented technique is most effective when the number of interface degrees of freedom is relatively small compared to the overall number of degrees of freedom of the system. The technique is applied to the case of the S.T.S.-S.T.-OMS Kit system. Finally, an evaluation of the presented method is included.

Engels, R. C.↗
NASA NTRS1982

The dynamic response of the thermosphere to the energy influx resulting from energetic O/+/ ions

Precipitating fluxes of energetic O(+) ions during magnetic storms constitute a significant source of energy to the nightside thermosphere at altitudes above 200 km. The resulting perturbations of temperature and winds in the thermosphere due to energetic O(+) precipitation are examined by computing the heating rate profile from such a precipitation event and using this as input to the NCAR thermospheric general circulation model. The results of a time dependent calculation show that heating due to energetic O(+) ion precipitation produces a significant perturbation to the thermospheric structure above about 300 km. Energetic O(+) precipitation events should produce considerable variability in the upper thermosphere during geomagnetic storms.

Torr, M. R.↗
NASA NTRS1983

A preliminary look at control augmented dynamic response of structures

The augmentation of structural characteristics, mass, damping, and stiffness through the use of control theory in lieu of structural redesign or augmentation was reported. The standard single-degree-of-freedom system was followed by a treatment of the same system using control augmentation. The system was extended to elastic structures using single and multisensor approaches and concludes with a brief discussion of potential application to large orbiting space structures.

Ryan, R. S.↗
NASA NTRS1983

Structural design for dynamic response reduction

A computer program for redesigning structural modes to reduce response has been initiated. The linear regulator approach in modal coordinates has been implemented. It is noted that the transformation of solution to physical structure is a major problem. It is concluded that the solution of stiffness equations and damping equations can be done separately as NXN set of (matrix Riccati) equations.

Hanks, B. R.↗
NASA NTRS1983

The dynamic response of the high-latitude thermosphere and geostrophic adjustment

The theory of geostrophic adjustment in which the adjustment process is critically dependent on the ratio of the scale size of the forcing to the Rossby radius of deformation, is applied to the qualitative explanation of certain features of the response of the high latitude thermosphere to inputs of energy and momentum. When the ratio is small, large wind speeds are efficiently generated by a momentum source, and when small, changes in the mass field associated with a heat source are more effectively produced. The Rossby radius variation with height explains the qualitatively different responses of the high latitude E and F regions during disturbed geomagnetic conditions as shown by both observations and numerical models. The present analytic solutions are in good agreement with model results concerning energy apportionment between divergent and rotational components of the wind field as a function of wavenumber.

Larsen, M. F.↗
NASA NTRS1983

A short cut integration scheme to determine the dynamic response of a launch vehicle with several payloads

The coupled base motion equations of a system composed of a launch vehicle and several payloads are derived. In previous work it was shown how the special form of these equations allow for a quick and accurate solution both for the response and the loads of the system. In this paper a short-cut version of this direct integration technique is presented and evaluated. The result is a method which, depending on the nature of the structure at hand, vasilates between a full-scale coupled base motion approach and an open loop base drive method. Although completely general, the presented technique is most effective when the number of interface degrees of freedom is relatively small compared to the overall number of degrees of freedom of the system. The S.T.S.-S.T.-O.M.S. Kit system is used as an illustrative example.

Engels, R. C.↗
NASA NTRS1983

A preliminary look at control augmented dynamic response of structures

This report deals with the augmentation of structural characteristics, mass, damping, and stiffness through the use of control theory in lieu of structural redesign or augmentation. Treated first is the standard single-degree-of-freedom system followed by a treatment of the same system using control augmentation. The system is extended to elastic structure using single and multisensor approaches and concludes with a brief discussion of potential application to large orbiting space structures.

Jewell, R. E.↗
NASA NTRS1983

Influence of unbalance on the nonlinear dynamical response and stability of flexible rotor-bearing systems

In this paper, some of the effects of unbalance on the nonlinear response and stability of flexible rotor-bearing systems is presented from both a theoretical and experimental standpoint. In a linear system, operating above its stability threshold, the amplitude of motion grows exponentially with time and the orbits become unbounded. In an actual system, this is not necessarily the case. The actual amplitudes of motion may be bounded due to various nonlinear effects in the system. These nonlinear effects cause limit cycles of motion. Nonlinear effects are inherent in fluid film bearings and seals. Other contributors to nonlinear effects are shafts, couplings and foundations. In addition to affecting the threshold of stability, the nonlinear effects can cause jump phenomena to occur at not only the critical speeds, but also at stability onset or restabilization speeds.

Gunter, E. J.↗
NASA NTRS1985

Effect of coulomb spline on rotor dynamic response

A rigid rotor system coupled by a coulomb spline is modelled and analyzed by approximate analytical and numerical analytical methods. Expressions are derived for the variables of the resulting limit cycle and are shown to be quite accurate for a small departure from isotropy.

Nataraj, C.↗
NASA NTRS1986

Parameterized materials and dynamic response characterizations in unidirectional composites

The values of phase velocities of ultrasonic waves in transversely isotropic media are presented in terms of the fiber volume fraction of a unidirectional fiberglass epoxy composite with constant matrix properties and the ratio between extensional moduli in the longitudinal and transverse directions of the composite when the properties of the fibers are changed, at a constant fiber volume fraction. The model of a homogeneous transversely isotropic medium is adopted to describe the relations between elastic properties and velocities. The displacements due to an oscillatory point source in an infinite medium are used as one measure of comparison of the behavior of the unidirectional composite according to the variations of the parameters, as described above. Values of phase velocities, elastic moduli, Poisson's ratios and displacements due to a point source can be read from the parameterized plots for a known fiber volume fraction or a known ratio between extensional moduli of the composite. Alternatively fiber volume fraction and the ratio between extensional moduli can be inferred from the plots when the values of the phase velocities are known; for example from experimental measurements. Therefore, such parameterized curves may be useful in nondestructive mechanical property and material degradation characterizations.

Williams, J. H., Jr.↗
NASA NTRS1987

Dynamic response of a viscoelastic Timoshenko beam

The analysis presented in this study deals with the vibratory response of viscoelastic Timoshenko (1955) beams under the assumption of small material loss tangents. The appropriate method of analysis employed here may be applied to more complex structures. This study compares the damping ratios obtained from the Timoshenko and Euler-Bernoulli theories for a given viscoelastic material system. From this study the effect of shear deformation and rotary inertia on damping ratios can be identified.

Kalyanasundaram, S.↗
NASA NTRS1989

AGARD standard aeroelastic configurations for dynamic response

Since emphasis is on the transonic speed range, special importance is placed on configurations for which available data are sufficient to define accurately a transonic flutter boundary. Only configurations with clean, smooth surfaces are considered suitable. Segmented models or models with surface-slope discontinuities are inappropriate. Excluded also, in general, are configurations and data sets that involve behavior that is uncertain or not well understood, uncertain model properties, or know sensitivities to small variations in model properties. In order to assess the suitability of configurations already tested and the associated data for designation as standard, a survey of AGARD member countries was conducted to seek candidates for the prospective set. The results of that survey are given and summarized along with the initial selection of a standard configuration.

Yates, E. Carson, Jr.↗
NASA NTRS1989

Dynamic response for thermal control and measurement and fast radiation thermometry

A preliminary evaluation was made by ORNL of a two-color ratio pyrometer (TCRP) for temperature control in the Modular Electromagnetic Levitation (MEL) experiment. A discussion was presented by Eric Spjut at the 1987 NASA Non-Contact Temperature Measurement Workshop (NASA Conf. Publ. 2503, pp. 182-213) in which he described the non-linear characteristics of the time response of TCPs. Researchers replicated his model and results and note that the non-linear response behavior is minimized for small temperature steps at high temperatures. They then used the predicted response in a model for a proportional or integral feedback controller and predicted the control characteristics for heating and cooling a 5-mm diameter sphere of niobium at high (1500 to 2750 K) temperatures. The analysis shows that for a slow (25-ms) time response for a commercial RCRP, overshoots of several hundred kelvins will result from a 100-K decrease in the setpoint, and temperature tracking errors of 14 to 45 K will occur for control temperature ramps of 1000K/s. For a fast (greater than 0.1 ms) time response, the overshoot and ramp response errors are largely eliminated.

Shepard, R. L.↗
NASA NTRS1988

The effect of elastic boundary conditions on the dynamic response of rectangular plates

Natural frequencies and forced steady-state harmonic response for the vibration of uniform rectangular plates with edges elastically restrained against rotation and transverse translation are addressed. A single mode Rayleigh-Ritz solution is derived using functions that describe the normal modes of vibration of a beam whose ends are elastically restrained. The finite element solution is obtained for comparison. MACSYMA symbolic manipulation system is implemented as an aid to the mathematical rigor of the Ritz approach, and NASTRAN finite element code is used to model the mechanical system. Comparisons are made to published results and the solutions of this study are found to give lower frequencies for some values of boundary restraint. Steady-state harmonic amplitudes of displacement and acceleration are found to agree favorably for the two solutions. Low predictions of steady-state strain from NASTRAN result in some cases when compared to the Ritz values. Finally, a subjective assessment is made about the merit of using MACSYMA and NASTRAN.

Brewer, Terry K.↗
NASA NTRS1990

Static and dynamic response of graphite-epoxy curved frames

Experiments were conducted to measure the three-dimensional static and vibratory response of two graphite-epoxy, thin-walled, open section frames. The frames are semicircular with a radius of three feet. One specimen had an I cross section and the other had a channel cross section. The experimental data is used to evaluate a mixed finite element model of the frames that is based on Vlasov-type, thin-walled, open section curved beam theory.

Collins, J. S.↗