Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Model electrode structures for studies of electrocatalyst degradation.

Proton exchange membrane fuel cells are being extensively studied as power sources because of their technological advantages such as high energy efficiency and environmental friendliness. The most effective catalyst in these systems consists of nanoparticles of Pt or Pt-based alloys on carbon supports. Understanding the role of the nanoparticle size and structure on the catalytic activity and degradation is needed to optimize the fuel cell performance and reduce the noble metal loading. One of the more significant causes of fuel cell performance degradation is the cathode catalyst deactivation. There are four mechanisms considered relevant to the loss of electrochemically active surface area of Pt in the fuel cell electrodes that contribute to cathode catalyst degradation including: catalyst particle sintering such as Ostwald ripening, migration and coalescence, carbon corrosion and catalyst dissolution. Most approaches to study this catalyst degradation utilize membrane electrode assemblies (MEAs), which results in a complex system where it is difficult to deconvolute the effects of the metal nanoparticles. Our research addresses catalyst degradation by taking a fundamental approach to study electrocatalyst using model supports. Nanostructured particle arrays are engineered directly onto planar glassy carbon electrodes. These model electrocatalyst structures are applied to electrochemical activity measurements using a rotating disk electrode and surface characterization by scanning electron microscopy. Sample transfer between these measurement techniques enables examination of the same catalyst area before and after electrochemical cycling. This is useful to probe relationships between electrochemical activity and catalyst structure such as particle size and spacing. These model systems are applied to accelerated aging studies of activity degradation. We will present our work demonstrating the mechanistic aspects of catalyst degradation using this simplified geometric system. The active surface area loss observed in repeated cyclic voltammetry is explained through characterization and imaging of the same RDE electrode structures throughout the aging process.

30 DIRECT ENERGY CONVERSION↗

Dealloyed Pt-Cu Core-Shell Nanoparticle Electrocatalysts for Use in PEM Fuel Cell Cathodes

We report the synthesis, characterization, and single fuel cell testing of a novel class of nanostructured Pt-Cu alloy particle materials for use as oxygen reduction electrocatalyst in polymer electrolyte membrane fuel cells. The active phase of the Pt alloy nanoparticle catalysts is prepared by electrochemical dissolution (voltammetric dealloying) of Cu surface atoms from Cu-rich Pt-Cu alloy precursors. Bulk and surface structural and compositional characterization suggests that the dealloyed active catalyst phase consists of a core-shell structure in which a multilayer Pt rich shell is surrounding a Pt-poor alloy particle core. The electrocatalytic Pt mass activity of the dealloyed core-shell particles for the oxygen reduction reaction (ORR) exceeds that of state-of-the art Pt electrocatalyst by more than a factor of 4 and thus meets performance targets for fuel cell cathodes [Gasteiger, H. A.; Kocha, S. S.; Sompalli, B.; Wagner, F. T. Appl. Catal. B: Environ. 2005, 56, 9-35]. It is hypothesized that a reduced Pt-Pt distance near the particle surface, stabilized by the lattice-contracted alloy core, may explain the modification of the surface catalytic reactivity. Dealloying of base-metal-rich noble metal alloy precursors is proposed as a more general strategy toward modifying the surface catalytic properties of noble metal surfaces.

30 DIRECT ENERGY CONVERSION↗

Tuning Bifunctional Oxygen Electrocatalysts by Changing the A-Site Rare-Earth Element in Perovskite Nickelates

Perovskite-structured (ABO 3 ) transition metal oxides are promising bifunctional electrocatalysts for efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). In this paper, we investigate a set of epitaxial rare earth nickelates (RNiO 3 ) thin films with controlled A-site isovalent substitution to correlate their structure and physical properties with ORR/OER activities. The ORR activity is shown to decrease monotonically with decreasing the A-site element ionic radius which lowers the conductivity of the RNiO 3 (R = La, La 0.5 Nd 0.5 , La 0.2 Nd 0.8 , Nd, Nd 0.5 Sm 0.5 , Sm, Gd) films, with LaNiO 3 being the most conductive and active. On the other hand, the OER activity initially increases upon substituting La with Nd and is maximal at La 0.2 Nd 0.8 NiO 3 , in which oxygen vacancies (VOs) start to form. Moreover, the OER activity remains comparable within error through Sm-doped NdNiO 3 . Beyond that, we cannot reliably measure activity due to the potential voltage drop across the film. The improved OER activity is ascribed to the partial reduction of Ni 3+ to Ni 2+ as a result of VOs, which increases the average occupancy of the e g antibonding orbital to more than one. Our work highlights the importance of tuning A-site elements as an effective strategy for balancing the ORR and OER activities of bifunctional electrocatalysts.

36 MATERIALS SCIENCE↗

Understanding Degradation Mechanisms in SrIrO 3 Oxygen Evolution Electrocatalysts: Chemical and Structural Microscopy at the Nanoscale

Designing acid-stable oxygen evolution reaction electrocatalysts is key to developing sustainable energy technologies such as polymer electrolyte membrane electrolyzers but has proven challenging due to the high applied anodic potentials and corrosive electrolyte. This work showcases advanced nanoscale microscopy techniques supported by complementary structural and chemical characterization to develop a fundamental understanding of stability in promising SrIrO 3 thin film electrocatalyst materials. Cross-sectional high-resolution transmission electron microscopy illustrates atomic-scale bulk and surface structure, while secondary ion mass spectrometry imaging using a helium ion microscope provides the nanoscale lateral elemental distribution at the surface. After accelerated degradation tests under anodic potential, the SrIrO 3 film thins and roughens, but the lateral distribution of Sr and Ir remains homogeneous. A layer-wise dissolution mechanism is hypothesized, wherein anodic potential causes the IrO x -rich surface to dissolve and be regenerated by Sr leaching. Finally, the characterization approaches utilized herein and mechanistic insights into SrIrO 3 are translatable to a wide range of catalyst systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Free and Noble Metal Free Ni 2 Mo 6 S 8 Electrocatalyst for Selective Electrosynthesis of H 2 O 2

Electrocatalytic two-electron reduction of oxygen is a promising method for producing sustainable H 2 O 2 but lacks low-cost and selective electrocatalysts. Here, the Chevrel phase chalcogenide Ni 2 Mo 6 S 8 is presented as a novel active motif for reducing oxygen to H 2 O 2 in an aqueous electrolyte. Although it has a low surface area, the Ni 2 Mo 6 S 8 catalyst exhibits exceptional activity for H 2 O 2 synthesis with >90% H 2 O 2 molar selectivity across a wide potential range. Chemical titration verified successful generation of H 2 O 2 and confirmed rates as high as 90 mmol H 2 O 2 g cat –1 h –1 . The outstanding activities are attributed to the ligand and ensemble effects of Ni that promote H 2 O dissociation and proton-coupled reduction of O 2 to HOO*, and the spatial effect of the Chevrel phase structure that isolates Ni active sites to inhibit O—O cleavage. The synergy of these effects delivers fast and selective production of H 2 O 2 with high turn-over frequencies of ≈30 s –1 . Additionally, the Ni 2 Mo 6 S 8 catalyst has a stable crystal structure that is resistive for oxidation and delivers good catalyst stability for continuous H 2 O 2 production. The described Ni-Mo6S8 active motif can unlock new opportunities for designing Earth-abundant electrocatalysts to tune oxygen reduction for practical H 2 O 2 production.

36 MATERIALS SCIENCE↗

New Class of Electrocatalysts Based on 2D Transition Metal Dichalcogenides in Ionic Liquid

The optimization of traditional electrocatalysts has reached a point where progress is impeded by fundamental physical factors including inherent scaling relations among thermokinetic characteristics of different elementary reaction steps, non-Nernstian behavior, and electronic structure of the catalyst. This suggests that the currently utilized classes of electrocatalysts may not be adequate for future needs. Our work reports on synthesis and characterization of a new class of materials based on 2D transition metal dichalcogenides including sulfides, selenides, and tellurides of group V and VI transition metals that exhibit excellent catalytic performance for both oxygen reduction and evolution reactions in an aprotic medium with Li salts. The reaction rates are much higher for these materials than previously reported catalysts for these reactions. The reasons for the high activity are found to be the metal edges with adiabatic electron transfer capability and a cocatalyst effect involving an ionic-liquid electrolyte. These new materials are expected to have high activity for other core electrocatalytic reactions and open the way for advances in energy storage and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial Engineering of W 2 N/WC Heterostructures Derived from Solid‐State Synthesis: A Highly Efficient Trifunctional Electrocatalyst for ORR, OER, and HER

Abstract To meet the practical demand of overall water splitting and regenerative metal–air batteries, highly efficient, low‐cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are required to displace noble metal catalysts. In this work, a facile solid‐state synthesis strategy is developed to construct the interfacial engineering of W 2 N/WC heterostructures, in which abundant interfaces are formed. Under high temperature (800 °C), volatile CN x species from dicyanodiamide are trapped by WO 3 nanorods, followed by simultaneous nitridation and carbonization, to form W 2 N/WC heterostructure catalysts. The resultant W 2 N/WC heterostructure catalysts exhibit an efficient and stable electrocatalytic performance toward the ORR, OER, and HER, including a half‐wave potential of 0.81 V (ORR) and a low overpotential at 10 mA cm −2 for the OER (320 mV) and HER (148.5 mV). Furthermore, a W 2 N/WC‐based Zn–air battery shows outstanding high power density (172 mW cm −2 ). Density functional theory and X‐ray absorption fine structure analysis computations reveal that W 2 N/WC interfaces synergistically facilitate transport and separation of charge, thus accelerating the electrochemical ORR, OER, and HER. This work paves a novel avenue for constructing efficient and low‐cost electrocatalysts for electrochemical energy devices.

Diao, Jinxiang↗

Perovskite-Type Solid Solution Nano-Electrocatalysts Enable Simultaneously Enhanced Activity and Stability for Oxygen Evolution

A trade-off between catalytic activity and structural stability generally exists in oxygen evolution electrocatalysis, especially in acidic environment. This dilemma limits the development of higher-performance electrocatalysts that are required by next-generation electrochemical technologies. In this work it is demonstrated that the inverse catalytic activity–structural stability relation can be broken by alloying catalytically inert strontium zirconate with the other catalytically active perovskite, strontium iridate. This strategy results in an alloyed perovskite electrocatalyst with simultaneously improved iridium mass activity and structural stability, by about five times, for the oxygen evolution reaction under acidic conditions. The experimental and theoretical results suggest that the alloying strategy generates multiple positive effects, mainly including the reduction of catalyst size, the decrease of catalyst covalency, and the weakening of surface oxygen-binding ability. The synergistic optimization of bulk and surface properties, as a result, enhances the intrinsic activity and availability of surface iridium sites, whilst significantly inhibiting the surface cation corrosion during electrocatalysis.

36 MATERIALS SCIENCE↗

Carbon-Nanotube-Bridging Strategy for Integrating Single Fe Atoms and NiCo Nanoparticles in a Bifunctional Oxygen Electrocatalyst toward High-Efficiency and Long-Life Rechargeable Zinc–Air Batteries

The development of highly efficient and robust bifunctional electrocatalysts for oxygen reduction (ORR) and evolution reactions (OER) is the key issue for realizing high-performance and long-life rechargeable zinc–air batteries (ZABs). However, it is still a great challenge to integrate independent ORR and OER sites in a catalyst with high activity. Here, a carbon nanotube-bridging strategy is proposed to synthesize such a bifunctional oxygen electrocatalyst enriched with highly active single-atom Fe sites for the ORR and high-performance nanosized NiCo hydroxides for the OER. Consequently, the developed catalyst shows a small overpotential difference of 0.686 V. When used as an oxygen electrode catalyst, the corresponding ZAB exhibits a large power density of 219.5 mW cm ₋2 , a small charge–discharge voltage gap of 0.72 V at 10 mA cm ₋2 , and outstanding discharge–charge durability without attenuation after more than 700 cycles. This work proposes a new idea to realize multifunctional catalysts and drives the practical application of ZABs.

25 ENERGY STORAGE↗

Epitaxial Design of Complex Nickelates as Electrocatalysts for the Oxygen Evolution Reaction

Abstract The oxygen evolution reaction (OER) is a crucial process in electrochemical water splitting, a promising technology to renewably yield hydrogen gas from water. Designing and developing earth‐abundant, efficient, and stable OER electrocatalysts to replace the most widely used but scarce RuO 2 and IrO 2 are thus of critical interest. Recently, ABO 3 ‐structured perovskite oxides, especially rare‐earth nickelates, are extensively studied for their potential use as OER electrocatalysts. In particular, the epitaxial synthesis of complex oxide thin films allows flexible and precise control over the materials so that their structure–stability–property relationships can be established. Using nickelate thin films as model systems, this review illustrates how epitaxial design allows researchers to test different hypotheses and proposed descriptors, as well as formulate new design principles. Following a brief introduction to the background of OER mechanisms, proposed activity descriptors, and synthesis methods, various epitaxial design strategies are surveyed including strain tuning, composition control, surface termination/orientation selection, defect engineering, and interface design. These have led to precise control over the atomic structures and electronic properties of nickelates which in turn determine their electrochemical performance. Finally, the remaining challenges and perspectives toward a deeper understanding and use of complex oxides as OER catalysts are discussed.

Choi, Min‐Ju↗

Vacancy Mediated Electrooxidation of 5‐Hydroxymethyl Furfuryl Using Defect Engineered Layered Double Hydroxide Electrocatalysts

Abstract Electrochemical biomass oxidation coupled with hydrogen evolution offers a promising route to generate value‐added chemicals and clean energy. The complex adsorption behavior of 5‐hydroxymethyl furfural (HMF) and hydroxyl ions (OH − ) on the electrocatalyst surface during HMF electrooxidation reaction (HMFOR) necessitates an in‐depth understanding of active sites available for adsorption. Herein, oxygen vacancy (V O ) defects are introduced in NiFe layered double hydroxide (LDH) using Ce dopants to manipulate electronic structure. Synchrotron‐based HE‐XRD and XAS indicate negligible V O in La‐doped NiFe while Ce doping leads to V O defects due to flexible Ce redox (Ce 3+ ↔ Ce 4+ ). The V O ‐rich Ce‐NiFe exhibits higher Faradic efficiency of ≈90% to produce 2,5‐furan dicarboxylic acid (FDCA), far greater than ≈60% for NiFe V O in Ce‐NiFe act as alternative active sites for OH − adsorption, hence reducing adsorption competition for the same metal sites. DFT calculation results corroborate experimental findings by showcasing that the presence of V O in Ce‐NiFe manipulates the adsorption energies and facilitates the chemical adsorption OH − in V O to improve HMFOR. In situ HE‐XRD derived pair distribution function coupled to RMC simulations confirm OH − trapping in V O and HMF adsorption on metal centers as evident by interlayer distance evolution. Taken together, this work showcases routes for dual‐site electrocatalyst design for improved biomass electrooxidation.

Chemistry↗

Blending Cr 2 O 3 into a NiO-Ni electrocatalyst for sustained water splitting

The rising H 2 economy demands active and durable electrocatalysts based on low-cost, earth-abundant materials for water electrolysis/photolysis. Here we report nanoscale Ni metal cores over-coated by a Cr 2 O 3 -blended NiO layer synthesized on metallic foam substrates. The Ni@NiO/Cr 2 O 3 triphase material exhibits superior activity and stability similar to Pt for the hydrogen-evolution reaction in basic solutions. The chemically stable Cr 2 O 3 is crucial for preventing oxidation of the Ni core, maintaining abundant NiO/Ni interfaces as catalytically active sites in the heterostructure and thus imparting high stability to the hydrogen-evolution catalyst. The highly active and stable electrocatalyst enables an alkaline electrolyzer operating at 20 mA cm –2 at a voltage lower than 1.5 V, lasting longer than 3 weeks without decay. Thus, the non-precious metal catalysts afford a high efficiency of about 15 % for light-driven water splitting using GaAs solar cells.

08 HYDROGEN↗

A Porous Pyrochlore Y 2 [Ru 1.6 Y 0.4 ]O 7–δ Electrocatalyst for Enhanced Performance towards the Oxygen Evolution Reaction in Acidic Media

A robust porous structure is often needed for practical applications in electrochemical devices, such as fuel cells, batteries, and electrolyzers. While templating approach is useful for the preparation of porous materials in general, it is not effective for the synthesis of oxide-based electrocatalysts owing to the chemical instability of disordered porous materials thus created. Now the synthesis of phase-pure porous yttrium ruthenate pyrochlore oxide using an unconventional porogen of perchloric acid is presented here. The lattice oxygen defects are formed by the mixed-valence state of Ru 4+ / 5+ through the partial substitution of Ru 4+ with Y 3+ cations, leading to the formation of mixed B-site Y 2 [Ru 1.6 Y 0.4 ]O 7-δ . This porous Y 2 [Ru 1.6 Y 0.4 ]O 7-δ electrocatalyst exhibits a turnover frequency (TOF) of 560 s -1 (at 1.5 V versus RHE) for the oxygen evolution reaction, which is two orders of magnitude higher than that of the RuO 2 reference catalyst (5.41 s -1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hollow structured carbon-supported nickel cobaltite nanoparticles as an efficient bifunctional electrocatalyst for the oxygen reduction and evolution reaction

Here, the exploration of efficient electrocatalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for fuel cells and metal-air batteries. In this study, we developed 3D hollow-structured NiCo 2 O 4 /C nanoparticles with interconnected pores as bifunctional electrocatalysts, which are transformed from solid NiCo 2 alloy nanoparticles through the Kirkendall effect. The unique hollow structure of NiCo 2 O 4 nanoparticles increases the number of active sites and improves contact with the electrolyte to result in excellent ORR and OER performances. In addition, the hollow-structured NiCo 2 O 4 /C nanoparticles exhibit superior long-term stability for both the ORR and OER compared to commercial Pt/C. The template- and surfactant-free synthetic strategy could be used for the low-cost and large-scale synthesis of hollow-structured materials, which would facilitate the screening of high-efficiency catalysts for energy conversion.

36 MATERIALS SCIENCE↗

Non-Equilibrium Synthesis of Highly Active Nanostructured, Oxygen-Incorporated Amorphous Molybdenum Sulfide HER Electrocatalyst

Molybdenum sulfide emerged as promising hydrogen evolution reaction (HER) electrocatalyst thanks to its high intrinsic activity, however its limited active sites exposure and low conductivity hamper its performance. To address these drawbacks, the non-equilibrium nature of pulsed laser deposition (PLD) is exploited to synthesize self-supported hierarchical nanoarchitectures by gas phase nucleation and sequential attachment of defective molybdenum sulfide clusters. Furthermore, the physics of the process are studied by in situ diagnostics and correlated to the properties of the resulting electrocatalyst. The as-synthesized architectures have a disordered nanocrystalline structure, with nanodomains of bent, defective S-Mo-S layers embedded in an amorphous matrix, with excess sulfur and segregated molybdenum particles. Oxygen incorporation in this structure fosters the creation of amorphous oxide/oxysulfide nanophases with high electrical conductivity, enabling fast electron transfer to the active sites. The combined effect of the nanocrystalline pristine structure and the surface oxidation enhances the performance leading to small overpotentials, very fast kinetics (35.1 mV dec -1 Tafel slope) and remarkable long-term stability for continuous operation up to -1 A cm -2 . This work shows possible new avenues in catalytic design arising from a non-equilibrium technique as PLD and the importance of structural and chemical control to improve the HER performance of MoS-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Abstract Designing cost‐efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal–air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe‐based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec −1 , achieved at a current density of 10 mA cm − 2 . Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO 2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Chemistry↗

Platinum and Palladium Monolayer Electrocatalysts for Formic Acid Oxidation

The direct formic acid fuel cell holds great promise as a next generation portable power source. In this paper we report an experimental study on Pt and Pd monolayer (Pt* and Pd*) atop the close-packed facet of transition metal substrates (denoted Pt*/M or Pd*/M, where M = Pt, Pd, Ir, Au, Rh and Ru) model catalysts for formic acid oxidation (FAO) and demonstrate a promotional effect on Pt*/Au(111) and Pd*/Pt(111) surfaces. Contrary to findings on monometallic surfaces, in situ infrared reflection adsorption spectroscopy collected during formic acid oxidation at potentials anodic of 375 mV reveal that the poisoning reaction intermediate CO is not formed on the monolayer surfaces, suggesting a promotion of the direct mechanisms of FAO at the expense of the indirect mechanism through CO. Our density functional theory calculations on model surfaces with 1:1 stoichiometry for overlayer to support metal atoms for the thermochemistry of the elementary steps defined by adsorbed CO, OH, COOH, and HCOO on the (111) facet of Pt, PtML/Au, Pd, and PdML/Pt largely attribute the promotional effect observed for the monolayer catalysts to easier removal of CO brought about by easier activation of water, relative to the monometallic catalysts. This synergy between experiments and theory brings us closer to a fundamental understanding of FAO electrocatalysts under reaction conditions, paving the way to achieving more active electrocatalysts possibly with less Pt or Pd; a pre-requisite for the mass commercialization of this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cactus-like NiCo 2 S 4 @NiFe LDH hollow spheres as an effective oxygen bifunctional electrocatalyst in alkaline solution

The high-performance non-precious electrocatalysts for both oxygen redn. reaction (ORR) and oxygen evolution reaction (OER) are crucial to the practical application of fuel cells and metal-air batteries. Herein, a novel cactus-like NiCo 2 S 4 @NiFe LDH hollow sphere assembled by one-dimensional (1D) NiFe LDH nanowires and two-dimensional (2D) NiFe LDH nanosheets on the NiCo 2 S 4 hollow spheres is prepd. by a facile hydrothermal method. The outer NiFe LDH nanowires and NiFe LDH nanosheets can effectively suppress the collapse and corrosion of inner NiCo 2 S 4 hollow structure during long-term stability tests. The integration of the effective OER electrocatalyst NiFe LDH into NiCo 2 S 4 to form heterostructures, as well as the strong electronic interaction between NiCo 2 S 4 and NiFe LDH, can greatly boost both ORR and OER activities. Due to the above merits, the NiCo 2 S 4 @NiFe LDH achieves remarkably a small potential gap (ΔE = E j =10-E 1/2 ) of only 0.667 V. In this paper, we offer a facile strategy to design efficient catalysts with heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗