SEARCH · Search NASA
Results for “electrolysis systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Towards a Unified Low-Cost Flow Plate, Flow-Field, PTL Solution for Proton Exchange Membrane Electrolyzers
Proton exchange membrane (PEM) water electrolysis is a highly efficient method for hydrogen production. Research cells typically consist of one proton exchange membrane, two catalyst layers, two porous transport layers, two flow-field plates, and two endplates. In commercial systems, the machined flow-field plates that are employed in research cells are typically replaced by stamped parts or open mesh material solutions to reduce manufacturing cost at scale. Nonetheless, the cell contains about 8 total interfaces: bipolar plate / flow plate material / porous transport medium / electrode / membrane / electrode / porous transport medium / flow plate material / bipolar plate. All these materials and interfaces need to be optimized for maximum performance and efficiency. Reducing the amount of interfaces by combining individual cell components directly benefits the fabrication cost (by reducing the parts count and the needs for surface coatings) and the electrochemical performance (by reducing ohmic losses). We have designed a novel PEM electrolysis cell with a piece of channeled titanium felt functioning as both the anode flow-field and the PTL, referred to as the channeled diffusion layer (CDL). The pores of the felt facilitate both in-plane and through-plane diffusion, ensuring maximum catalyst utilization while also minimizing mass transport loss. The titanium felt can be mass manufactured with existing stamping and forming methods and is therefore a promising candidate to reduce the capital cost of PEM electrolyzers whilst improving hydrogen production efficiency. Experiments conducted with 3mg IrOx/cm2 loading MEAs have shown a approximately 40% boost in peak current by implementing the CDL design. Low catalyst-loading MEAs are being tested in ongoing experiments and their results will be discussed and compared.
A Cocatalytic System for Electrooxidation of Primary, Secondary, and Benzyl Alcohols Based on a Triruthenium Oxo-Centered Cluster and NHPI
Increasing interest in alternative methods for fuel generation and chemical synthesis has resulted in an increased focus on the development of electrocatalysts for energy relevant small molecule transformations, such as the oxidation of methanol. Partial methanol oxidation is a crucial step in the generation of the commodity chemical formaldehyde, and its complete oxidation to carbon dioxide can also serve as the anodic reaction in direct methanol fuel cells. We report a coelectrocatalytic system comprised of an oxo-centered triruthenium cluster (Ru 3 O) as the catalyst, with the electro-generated N-phthalimido-N-oxyl (PINO) radical species acting as a redox mediator. Only a mild Brønsted base, 2,6-lutidine, is required to achieve an electrocatalytic response. The cocatalytic system demonstrates remarkable cooperativity, shifting the oxidation potential of MeOH (Ep) less positive by ca. 0.5 V compared to the intrinsic response of the Ru 3 O complex. Controlled potential electrolysis on a model substrate, 4-trifluoromethylbenzyl alcohol, demonstrates selective production of the two-electron, two-proton aldehyde product with a Faradaic efficiency of 79 ± 11% at a rate of 3.14 s –1 . The rate of cocatalysis is 50-fold greater than the intrinsic activity of Ru3O and 26-fold greater than that of PINO alone under otherwise identical conditions. Mechanistic studies reveal the oxidation of a Ru 3 O–alkoxide species as the potential-determining step, while two possible rate-determining steps are identified depending on the substrate. A preference for sterically uninhibited electron-rich benzyl alcohol substrates suggests that a H atom transfer from the Ru 3 O–alkoxide adduct to PINO is rate-determining, while the lack of an observed kinetic isotope effect using deuterated MeOH suggests the oxidation of the Ru 3 O–alkoxide species is both rate- and potential-determining for cocatalysis.
Achieving high hydrogen productivities of 20 L/L-day via microbial electrolysis of corn stover fermentation products
Microbial electrolysis cells have the potential to generate renewable hydrogen from underused waste streams, however current devices have not reached very large productivity targets using real waste products at any scale. This study used a waste from fermented corn stover known as corn stover fermentation product to reach performance metrics that could be commercialized, if adequately scaled. Average current densities in MECs with mature biofilms reached 17.9 +/- 1.6 A/m 2 at an organic loading rate of 30 grams of chemical oxygen demand per liter of anode volume per day (g/L-day), reaching a maximum current density of 27.2 +/- 2.9 A/m 2 . Hydrogen productivities reached 20.2 +/- 2.0 L of H 2 per L anode volume per day (L/L-day). These represent the highest current densities and highest hydrogen productivities using a complex feedstock in a microbial electrolysis cell. Organic acids and sugars present in untreated substrate were converted at high percentages in MECs, with most above 90% conversion, at organic loading rates of 10, 20, and 30 g/L-day. The effect of periodic high liquid flow rates through the anode on performance was assessed. These tests, called pulsing, showed that hydrogen productivities and current densities increased most dramatically as flow was pulsed every hour at a baseline flow rate of 0.3 mL/min. These productivities show promise for high performance systems, if adequate scale up can be achieved.
Benchmarking Advanced Water Splitting Technologies: Best Practices in Materials Characterization
The high-level project goal is to create a comprehensive Best Practices benchmarking framework at the materials, component, device and systems levels for advanced water splitting technologies. All advanced water splitting pathways covered under the HydroGEN Energy Materials Network (EMN) Consortium, which include advanced high and low temperature electrolysis of water, photoelectrochemical (PEC) water splitting and solar thermochemical hydrogen (STCH) need these best practices to advance materials discovery. These practices will also aid the H2@Scale DOE initiative to accomplish their goals of large-scale H2 production.
Operating Strategies for Dispatchable PEM Electrolyzers that Enable Low-Cost Hydrogen Production
Hydrogen is a pathway to enabling decarbonization across multiple economic sectors that cannot be directly decarbonized with electricity including heat for industrial operations, medium- and heavy-duty transportation applications, long-duration energy storage, and as a feedstock for chemical synthesis. Producing hydrogen at low costs and carbon footprint is likely essential to economically decarbonize these otherwise "hard to decarbonize" sectors. Low-temperature polymer electrolyte membrane (PEM) electrolysis produces hydrogen from water and electricity and is a rapidly developing pathway towards making hydrogen at the scales required for decarbonization applications. The levelized cost of electrolytic hydrogen is dependent on the capital cost, efficiency, and durability of the electrolyzer system as well as the price of electricity supplied to the electrolyzer and the annual utilization of the electrolyzer (capacity factor). Electricity price and capacity factor depend on the source of energy that the system uses and impact other economic factors. Electricity price and capacity factor and the connections between other aspects of hydrogen production via PEM electrolyzers are the focus of this work. PEM electrolyzers have conventionally been operated at high capacity factors using electricity purchased from utilities with a constant price throughout the year. To achieve lower effective electricity prices, recent work has investigated opportunities for electrolyzers to purchase electricity in wholesale markets, where the cost of electricity varies hourly. This option can lead to lower electricity costs when the electrolyzer is a controllable load that ramps up and down rapidly and turns on and off frequently. This configuration and operating strategy capitalizes on times of low wholesale electricity prices and results in lower hydrogen levelized costs than constant operation due to reduced electricity costs even though the reduced capacity factor increases the cost of recovering the capital investment. Cycling on and off frequently also has implications for electrolyzer durability. An electrolyzer configuration where it is directly connected to renewable generation such as wind or solar, only running when the generator is producing energy, has similar implications on operating strategy, hydrogen levelized cost, capacity factor, and durability. This work provides insight into the relationships between dispatchable electrolyzer operating strategies and the cost of producing hydrogen from these systems, outlining strategies and opportunities to minimize production costs while minimizing operations that are likely to negatively impact system durability and efficiency. We find strategies that minimize electrolyzer cycling and the resulting durability impacts while increasing the hydrogen levelized cost only slightly above the minimum. We also find opportunities for batteries to minimize the number of cycles in systems directly connected to renewable generation. These findings outline key opportunities for future electrolyzer deployments and the synergistic benefits between electrolyzers and increased deployment of renewable energy generation like wind and solar. They also inform research and development that is reducing electrolyzer capital cost while managing durability impacts.
A Novel Process for Carbon Dioxide Conversion to Fuel
In this project, TDA developed a new mixed metal oxide-based sorbent that converts CO2 (captured from coal fired power plants) to CO, which can then be combined with renewable H2 generated by water electrolysis or H2 from steam methane reforming to produce different liquid fuels. TDA’s absorbent-based CO2 conversion process uses a redox process, which splits the catalytic reforming of methane with CO2 reaction into two stages: CO2 reduction to CO and CH4 reforming into H2 and CO which eliminates the equilibrium limitations. The CO produced in the two-stage reactor system can then be further reacted with renewable H2 to produce methanol, naphtha, diesel, or gasoline. We worked with the Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI) to design and develop the liquid fuel synthesis process that is built around this new material. We demonstrated the techno-economic viability of the new sorbent based redox process to convert CO2 into synthesis gas by demonstrating continuous carbon dioxide reduction in a prototype test system for over 585 hours while converting up to 10 kg CO2/day. With the successful completion of the R&D effort, the technology is now ready for a larger pilot-scale demonstration and the technology readiness has been raised from TRL 3 to TRL 5. In collaboration with UCI, we completed a high-fidelity process design and economic analysis. The required sale price (RSP) for gasoline (Case 1 NG-MTG) is $4.91/gal and naphtha and diesel (Case 2 NG-FT) are $4.23/gal and $6.07/gal, respectively, on a 2011 dollar basis. To put these costs in perspective, the California prices in current dollars (with its strict specifications) for regular grade gasoline from last year to current year have varied from a low of $3.10/gal in January 2021 to a high of $5.76/gal in March 2022, while prices for diesel from last year to current year have varied from a low of $3.40/gal in January 2021 to a high of $6.41/gal in May 2022 according to the U.S. Energy Information Agency data. It should be noted that the gasoline and diesel produced by these designs of Case 1 and Case 2 would be of very high quality and both nitrogen and sulfur free. These RSPs are based on a cost of imported electricity of $64/MWh based on the low-end current wind generated electricity cost (Genevieve 2011). This cost is by far the largest component of the variable costs used in computing the RSPs. A sensitivity analysis of these RSPs to the cost of imported electricity shows that the cost of the imported electricity has a significant effect on the RSPs. The life cycle analysis (LCA) shows that the total cradle-to-gate CO2 emissions for both liquid fuels (diesel and gasoline) were negative, indicating that overall more CO2 is consumed than released during production of the fuel from CO2 feed stack for both cases (-296 kgCO2 per MT gasoline for Case 1 and -705 kgCO2 per MT diesel for Case 2). On a cradle-to-grave comparison, the use of diesel produced using TDA’s process (2,457 kgCO2 per MT diesel) would release 37.6% less CO2 compared to petroleum based diesel (3,937 kgCO2 per MT diesel) while the use of gasoline produced using TDA’s process (2,792 kgCO2 per MT gasoline) would release 29.3% less CO2 compared to petroleum based gasoline (3,946 kgCO2 per MT gasoline). With the successful completion of the R&D effort, the technology is now ready for a bench-scale demonstration and the technology readiness has been raised from TRL 3 (Analytical and experimental critical function and/or characteristic proof of concept) to TRL 5 (Laboratory scale similar system validation in relevant environment).
Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis
The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.
Grid-responsive hydrogen production: Capital utilization and current density vs. efficiency in variable electricity markets
To achieve low-cost hydrogen production from water electrolyzers, grid tied electrolysis may need to operate dynamically to minimize the cost of supplying energy to the electrolyzer stack and produce hydrogen during low-cost hours and turn off/down during high-cost hours. Operating systems in this way can decrease capital utilization (capacity factor) and electricity costs. This strategy would shift the dominant cost drivers away from electricity (and thus efficiency) to the capital costs of the system, due to the underutilized capital when operating at low-capacity factors. Increasing the operational current density of the system could, in effect, reduce the capital cost of the system while producing hydrogen at a lower efficiency on a per unit energy basis. In the variable electricity cost profiles analyzed in this paper, increasing the current density for liquid alkaline from 0.5 A/cm2 to 1.5 Ac/m2 and proton exchange membrane electrolyzers from 2 A/cm2 to 4 A/cm2 resulted in substantial reductions in the levelized cost of hydrogen. Additionally, as capacity factors and electricity costs decrease, the optimal operating current density of the electrolyzer systems analyzed increases. These findings suggest R&D efforts should focus on increasing the operational current densities, reducing the turn down ratios, and understanding the durability implications of those strategies on low-temperature liquid alkaline and proton exchange membrane electrolyzers.
Advancing Photo(Electro)Chemical Water Splitting: The Promise of Atomically Dispersed Single‐, Dual‐, and Alloy‐Site Catalysts
Single-atom catalysts (SACs) have rapidly gained prominence as an emerging class of electrocatalysts for water splitting, owing to their uniform and precisely defined active sites. By maintaining uniform reaction pathways, SACs minimize the formation of unwanted byproducts, thus exhibiting extremely high selectivity and atomic efficiency. A key determinant of SAC performance lies in the interfacial interaction between the isolated metal atoms and the supporting material under strong metal–support coordination, which is vital for maintaining long-term activity. However, despite these benefits, reproducibly synthesizing SACs with high metal loadings while retaining uniform dispersion remains a significant challenge. To address the intrinsic challenges of SACs, recent research has expanded into dual-atom catalysts (DACs) and single-atom alloy catalysts (SAACs), providing synergistic active sites and combining the benefits of SACs with bimetallic systems. Furthermore, this review systematically explores the latest advancements in synthesis methods and innovations for SACs for electrochemical water splitting. Additionally, it examines the evolution of catalyst design, emphasizing the unique structural and electronic characteristics of single-site, dual-site, and alloyed SAC systems and highlighting their critical roles in accelerating water-splitting reaction kinetics as well as the prevailing challenges and outlining promising directions for advancing hydrogen production via water electrolysis.
Multi-Scale Modeling and Prototype Development for Electrochemical CO2 Reduction (CRADA Final Report)
In this CRADA project, Lawrence Livermore National Laboratory, Stanford University, SLAC National Laboratory, and TotalEnergies collaboratively executed a multidisciplinary investigation of electrochemical reduction of CO2 to produce sustainable fuels and chemicals. Overall, the project led to an increased understanding of the fundamental processes involved in CO2 electrolysis, from the atomistic scale to the full electrolyzer device scale, ultimately leading to design guidelines for CO2 electrolyzers that will help in their future commercialization. As the model systems, Ag- and Cu-based catalysts were investigated in various forms depending on the electrochemical platform that was utilized to study the activity, selectivity, and durability towards electrochemical CO2 reduction. By employing experimental, theoretical, and computational techniques, the project team experimentally validated multi-physics models, evaluated the experimental levers that lead to increased electrolyzer reaction selectivity and energy efficiency, and used computational optimization to design higher performance electrodes. The learnings of this project were extensively documented in publicly available peer-reviewed journal publications and conference presentations, which serve as a foundation for further work to build from.
Operational and scaling-up barriers of SOEC and mitigation strategies to boost H 2 production- a comprehensive review
Solid oxide electrolysis cells (SOECs) proffer a flexible and environmentally friendly solution to reduce CO 2 emissions and/or produce H 2 fuel for various applications. Here, the integration of this technology with renewable energy systems makes them even more promising in realizing a near-perpetual green energy infrastructure in the near future. SOEC technology has achieved stupendous improvement in recent years, and some of the limiting factors to the commercialization of this technology have been explored. It is, therefore, necessary to have a succinct outlook of the different factors that contribute to the recent developments in SOEC technology. The current work presents a comprehensive review of the state-of-the-art SOEC component materials and their degradation mechanisms, SOEC modeling essentials and efficiencies, and the scalability of SOECs. Although SOEC is considered a highly promising technology and sufficient multifaceted research has been done, yet not been widely commercialized. Despite the improvement to mitigate degradation of the SOEC materials, a large share of the degradation concerns sprang from charge transfer reaction at the triple-phase boundaries of the H 2 -electrode. Part of which can be improved by microkinetic modeling of these materials supported by their characterization to give insight into their development. Some other directions for the future in advancing this technology toward the commercialization stage are thoroughly addressed.
Electrochemical Oxidation of Organic Molecules at Lower Overpotential: Accessing Broader Functional Group Compatibility with Electron-Proton Transfer Mediators
CONSPECTUS: Electrochemical organic oxidation reactions are highly appealing because protons are often effective terminal electron acceptors, thereby avoiding undesirable stoichiometric oxidants. These reactions are often plagued by high overpotentials, however, that greatly limit their utility. Single-electron transfer (SET) from organic molecules generates high energy radical-cations. Formation of such intermediates often requires electrode potentials far above the thermodynamic potentials of the reaction and frequently causes decomposition and/or side reactions of ancillary functional groups. In this Account, we show how electrocatalytic electron-proton transfer mediators (EPTMs) address this challenge. EPTMs bypass the formation of radical-cation intermediates by supporting mechanisms that operate at electrode potentials much lower (=1 V) than analogous direct electrolysis reactions. The stable aminoxyl radical TEMPO (2,2,6,6-tetramethylpiperidine N-oxyl) is an effective mediator for electrochemical alcohol oxidation, and we have employed such processes for applications ranging from pharmaceutical synthesis to biomass conversion. A complementary electrochemical alcohol oxidation method employs a cooperative Cu/TEMPO mediator system that operates at 0.5 V lower electrode potential than the TEMPO-only mediated process. This difference, which arises from a different catalytic mechanism, rationalizes the broad functional group tolerance of Cu/TEMPO-based aerobic alcohol oxidation catalysts. Aminoxyl mediators address long-standing challenges in the "Shono oxidation", an important method for a-C–H oxidation of tertiary amides and carbamates. Shono oxidations are initiated by a high-potential SET step that limits their utility. Aminoxyl-mediated Shono-type oxidations have been developed that operate at much lower potentials and tolerate diverse functional groups. Analogous reactivity underlies a-C–H cyanation of secondary cyclic amines, a new method that enables efficient diversification of piperidine-based pharmaceutical building blocks and preparation of non-natural amino acids. Electrochemical oxidations of benzylic C–H bonds are commonly initiated by SET to generate radical cations, but such methods are again plagued by large overpotentials. Mediated electrolysis methods that promote hydrogen-atom-transfer (HAT) from benzylic C–H bonds to Fe-oxo species and phthalimide N-oxyl (PINO) support C–H oxygenation, iodination, and oxidative-coupling reactions. A complementary method merges photochemistry with electrochemistry to achieve amidation of C(sp3)–H bonds. This unique process operates at much lower overpotentials compatible with diverse functional groups. These results have broad implications for organic electrochemistry, highlighting the importance of "overpotential" considerations and the prospects for expanding synthetic utility by using mediators to bypass high-energy outer-sphere electron-transfer mechanisms. Principles demonstrated here for oxidation are equally relevant to electrochemical reductions.
Influence of Supporting Electrolyte on Hydroxide Exchange Membrane Water Electrolysis Performance: Catholyte
Alkaline or hydroxide exchange membrane water electrolysis (HEMWE) is a promising technology for green hydrogen production using platinum group metal-free catalysts and stainless steel, an advantage of alkaline water electrolysis (AWE), and a gas-impermeable membrane, a parallel to proton exchange membrane electrolysis (PEMWE). However, the HEMWE requires supporting electrolytes and there is minimal understanding of their role on the respective reactions. Without SELs, HEMWE performance and durability are worse than PEMWE systems. Herein, consistently feeding potassium hydroxide anolyte, we systematically study the effects of catholyte SELs in HEMWEs including dry vs. wet operation, cation effects, anion effects, and cation/OH ratios on cell potential and stability. We report that (i) hydration of the cathode improves high current density operation by preventing dehydration of the hydroxide exchange membrane (HEM), (ii) there was no correlation between cation type and cell potential, (iii) cell potential and high frequency resistance did not correlate with SEL conductivity, (iv) cathodic carbonate SEL had a significant negative effect on cell performance, (v) increased cation/OH ratio also caused increased cell potentials. Overall, this study concludes that feeding water or potassium hydroxide solution is desirable to improve the AEMWE performance.
Electron-Phonon Renormalization in the Proton-Conducting Electrolyte Ba Zr O 3 and Its Implications for High-Temperature Electrolysis
Electrical leakage is an inherent problem in solid-oxide fuel and electrolyzer cells, limiting their energy-conversion efficiency. High concentrations of electrons or holes can exacerbate this issue. However, it is largely unclear how the typical high operating temperatures of the systems influence their charge-carrier concentrations. In this work, we use first-principles calculations to examine how lattice vibrations impact electrical conductivity in conventional electrolytes, using Ba Zr O 3 as a representative material. Our analysis shows that phonon-induced shifts in the band gap and band edges lead to a dramatic increase in p -type carrier concentrations at temperatures above 600 K, compared to models that neglect temperature effects. Additionally, we reveal the importance of oxygen-ion motion on band-edge positions, which makes valence-band-edge shift dominate the band-gap change. Our study provides a protocol for calculating phonon-induced changes in similar oxides, paving the way for interrogating electrical leakage in electrolytes for high-temperature operation. Published by the American Physical Society 2025
Life cycle assessment of a novel gas switching reforming for sustainable hydrogen production with CO2 capture
Gas switching reforming for hydrogen production (GSR-H2) presents an efficient, low-carbon hydrogen production method that incorporates integrated carbon capture, offering efficiency gains over traditional methods such as proton exchange membrane (PEM) electrolysis, steam methane reforming (SMR) and the newer method of chemical looping reforming (CLR). GSR-H2 has been demonstrated in lab scale which operates as an exothermic process that eliminates the need for additional natural gas combustion, using its own waste heat to generate process steam and partially offset energy usage through electricity production. Beyond its thermal self-sufficiency, GSR-H2 advances upon CLR by integrating all reaction stages within a single reactor cluster, eliminating the complexities of solid circulation, reducing capital costs, and enhancing overall process efficiency. This streamlined design simplifies scale-up and enables inherent CO2 separation with minimal energy penalty, making GSR-H2 a highly competitive pathway for low-carbon hydrogen production. This study presents the first life cycle assessment (LCA) of GSR-H2, offering a novel evaluation of this new process’s environmental impacts across diverse energy scenarios. Key findings reveal that in the renewables-powered scenario, GSR-H2 achieves a GWP of 2.77 kg CO2 eq per kg H2, a substantial improvement over SMR’s 10.4 kg CO2 eq and close to the low emissions of CLR (1.84 kg CO2 eq) and PEM electrolysis (1.85 kg CO2 eq). These results demonstrate GSR-H2’s competitive advantage as a lower-emission alternative, combining design simplicity and efficiency gains, especially in renewable-integrated systems. These results establish GSR-H2 as a competitive, scalable option for hydrogen production, particularly in decarbonization efforts.
Methods for carbon dioxide hydrogenation
A method of carbon dioxide hydrogenation comprises introducing gaseous water to a positive electrode of an electrolysis cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprises an electrolyte material having an ionic conductivity greater than or equal to about 10-2 S/cm at one or more temperatures within a range of from about 150° C. to about 650° C. Carbon dioxide is introduced to the negative electrode of the electrolysis cell. A potential difference is applied between the positive electrode and the negative electrode of the electrolysis cell to generate hydrogen ions from the gaseous water that diffuses through the proton-conducting membrane and hydrogenates the carbon dioxide at the negative electrode. A carbon dioxide hydrogenation system is also described.
Energy Arbitrage with Hydrogen: HTSE + Combustion Turbine
The Light Water Reactor Sustainability (LWRS) program seeks to keep Nuclear Power Plants (NPPs) competitive in the changing energy market. The Flexible Plant Operation and Generation (FPOG) pathway investigates Energy Storage Systems (ESS) to give operators an alternative to curtailment or paying to put power on the grid. This work investigates the concept of diverting heat and electricity to High Temperature Steam Electrolysis (HTSE) to produce hydrogen when grid demand is low, storing that hydrogen, then burning it in a combustion turbine to produce zero-emission electricity when grid demand is high. A process model of the combustion turbine was developed in Aspen HYSYS, which was used to complete a parametric analysis and techno-economic analysis.