Results for “emulators” — Page 16

NASA NTRS2019

Evaluation of Classifier Complexity for Delay Tolerant Network Routing

The growing popularity of small cost effective satellites (SmallSats, CubeSats, etc.) creates the potential for a variety of new science applications involving multiple nodes functioning together or independently to achieve a task, such as swarms and constellations. As this technology develops and is deployed for missions in Low Earth Orbit and beyond, the use of delay tolerant networking (DTN) techniques may improve communication capabilities within the network. In this paper, a network hierarchy is developed from heterogeneous networks of SmallSats, surface vehicles, relay satellites and ground stations which form an integrated network. There is a tradeoff between complexity, flexibility, and scalability of user defined schedules versus autonomous routing as the number of nodes in the network increases. To address these issues, this work proposes a machine learning classifier based on DTN routing metrics. A framework is developed which will allow for the use of several categories of machine learning algorithms (decision tree, random forest and deep learning) to be applied to a dataset of historical network statistics, which allows for the evaluation of algorithm complexity versus performance to be explored. We develop the emulation of a hierarchical network, consisting of tens of nodes which form a cognitive network architecture. CORE (Common Open Research Emulator) is used to emulate the network using bundle protocol and DTN IP neighbor discovery.

Dudukovich, Rachel↗

NASA NTRSDate not supplied

Hybrid-Electric Aero-Propulsion Controls Testbed Results

NASA is supporting the development of Electrified Aircraft Propulsion (EAP) technology due to its potential to reduce aircraft fuel burn, emissions, and noise as well as improving safety and performance. One focus of this research is the electrification of conventional turbomachinery propulsion systems, which offers ways to improve the performance and operability of turbine-engine powered aircraft through the addition of electro-mechanical systems. These hybrid-electric turbine engines provide additional actuation and energy management control opportunities for improving stability and transient response behavior. This paper summarizes the results of a Hardware-in-the-Loop (HIL) test performed at the NASA Electric Aircraft Testbed (NEAT) during the summer of 2022. The test demonstrates the feasibility and performance of an advanced energy management control strategy by integrating a simulated turbofan engine with scaled electro-mechanical hardware. A full-scale real-time reference model of a geared turbofan was run alongside a scaled electro-mechanical system representing the electrified turbofan components operating at a megawatt-scale power level. The model was interfaced with the hardware through a novel closed-loop control and scaling algorithm that emulated the dynamic speed and torque response of the turbofan shafts. The control strategy was implemented on the electrical machines connected to the emulated turbomachinery shafts. The results from the testbed are compared against simulations that predict the testbed and geared turbofan model operation. The energy management control strategy successfully changed the operating point of the engine model and improved its stability during throttle transients. These results also demonstrate the success of the novel closed loop control and scaling approach for emulating turbomachinery and elevate the Technology Readiness Level (TRL) of the energy management control strategy.

Aeronautics↗

NASA NTRSDate not supplied

Electrified Aircraft Propulsion Controls Hardware Testing

Electrified Aircraft Propulsion (EAP) systems hold potential for the reduction of aircraft fuel burn and emissions. To realize this potential for single-aisle aircraft, control technology challenges associated with EAP designs are increasing the demand for Hardware-In-the-Loop (HIL) studies that address the tightly coupled electrical powertrain and turbofan propulsion systems. Reconfigurable HIL testbeds enable the study of integrated supervisory control and control approaches that augment engine shaft torques to improve performance. This paper presents an overview of conceptual EAP controls architecture testing in two HIL testbeds. The NASA Electric Aircraft Testbed provides the ability for megawatt class electric powertrain testing for technology maturation. A 100 kilowatt testbed, the Hybrid Propulsion Emulation Rig, allows for rapid controls technology trade studies. In both testbeds, controls testing is performed by implementing the electrical power system in hardware while turbomachinery is emulated via electric machines that are commanded by a real-time model and controls. A novel scaling algorithm is applied to emulate the inertial loads of the turbomachinery that causes the electric machines to respond in a fashion similar to that of the full-scale propulsion system they represent. Results demonstrate desired control performance at both testbed scales for the conceptual EAP architecture.

Electrified Aircraft Propulsion↗

NASA NTRSDate not supplied

Electrified Aircraft Propulsion Controls Hardware Testing

Electrified Aircraft Propulsion (EAP) systems hold potential for the reduction of aircraft fuel burn and emissions. To realize this potential for single-aisle aircraft, control technology challenges associated with EAP designs are increasing the demand for Hardware-In-the-Loop (HIL) studies that address the tightly coupled electrical powertrain and turbofan propulsion systems. Reconfigurable HIL testbeds enable the study of integrated supervisory control and control approaches that augment engine shaft torques to improve performance. This paper presents an overview of conceptual EAP controls architecture testing in two HIL testbeds. The NASA Electric Aircraft Testbed provides the ability for megawatt class electric powertrain testing for technology maturation. A 100 kilowatt testbed, the Hybrid Propulsion Emulation Rig, allows for rapid controls technology trade studies. In both testbeds, controls testing is performed by implementing the electrical power system in hardware while turbomachinery is emulated via electric machines that are commanded by a real-time model and controls. A novel scaling algorithm is applied to emulate the inertial loads of the turbomachinery that causes the electric machines to respond in a fashion similar to that of the full-scale propulsion system they represent. Results demonstrate desired control performance at both testbed scales for the conceptual EAP architecture.

Electrified Aircraft Propulsion↗

NASA NTRS2023

Hybrid-Electric Aero-Propulsion Controls Testbed Results

NASA is supporting the development of Electrified Aircraft Propulsion (EAP) technology due to its potential to reduce aircraft fuel burn, emissions, and noise as well as improving safety and performance. One focus of this research is the electrification of conventional turbomachinery propulsion systems, which offers ways to improve the performance and operability of turbine-engine powered aircraft through the addition of electro-mechanical systems. These hybrid-electric turbine engines provide additional actuation and energy management control opportunities for improving stability and transient response behavior. This paper summarizes the results of a Hardware-in-the-Loop (HIL) test performed at the NASA Electric Aircraft Testbed (NEAT) during the summer of 2022. The test demonstrates the feasibility and performance of an advanced energy management control strategy by integrating a simulated turbofan engine with scaled electro-mechanical hardware. A full-scale real-time reference model of a geared turbofan was run alongside a scaled electro-mechanical system representing the electrified turbofan components operating at a megawatt-scale power level. The model was interfaced with the hardware through a novel closed-loop control and scaling algorithm that emulated the dynamic speed and torque response of the turbofan shafts. The control strategy was implemented on the electrical machines connected to the emulated turbomachinery shafts. The results from the testbed are compared against simulations that predict the testbed and geared turbofan model operation. The energy management control strategy successfully changed the operating point of the engine model and improved its stability during throttle transients. These results also demonstrate the success of the novel closed loop control and scaling approach for emulating turbomachinery and elevate the Technology Readiness Level (TRL) of the energy management control strategy.

Aeronautics↗

NASA NTRSDate not supplied

Subscale Hardware-In-The-Loop Results for Hybrid Electric Turbofan Controls Use Cases

NASA is investigating hybrid electric turbine engine systems for commercial transport aircraft due to the potentially significant improvements hybrid electric technology offers in performance, fuel consumption, and operational and design flexibility. Recently, the technology has been tested at full scale in partnership with industry and advanced to Technology Readiness Level 4. This presentation will focus on a recent subscale hardware-in-the-loop test of an open source turbofan engine model developed by NASA. The Advanced Geared Turbofan 30,000 lbf – electrified (AGTF30-e) engine is used as a reference model to demonstrate control system design and use cases for an example mild hybrid electric system with no large-scale energy storage. This model is run in real-time in NASA’s Hybrid Propulsion Emulation Rig (HyPER) and is used to drive an emulation of the turbomachinery system using subscale electric machines. This dynamic scaled shaft emulation interacts with a subscale (<100 kW) hybrid system consisting of electric machines, motor controllers, and a programmable electronic load. Specific use cases demonstrated include the use of Turbine Electrified Energy Management to improve operation during transients, megawatt-scale power extraction from the AGTF30-e, and power transfer between engine spools. Results related to the effectiveness of hybrid systems are qualitatively compared to results from industry testing.

Hybrid↗

NASA NTRSDate not supplied

GeoNEX-ML: A Machine Learning System for Earth Observations

Improved capabilities of earth monitoring satellites are enabling a wide range of studies on the environmental effects of climate change, often leveraging the recent advancements in machine learning. At the same time, the new capabilities, including higher spatial resolution and temporal frequency, are expanding the amount of data generated at exponential rates. At the NASA Earth eXchange (NEX), we build deep learning methods to learn from cross sensor satellite-based Earth observations for generating new datasets with efficient processing techniques. Using current generation geostationary satellites on NEX, we present an interchangeable set of machine models to perform spectral adjustment, physical model emulation, LEO-GEO emulation, and optical flow. These tools are used to generate consistent virtual observations across sensors, perform atmospheric correction and cloud detection, and estimate land surface temperature and atmospheric winds. This approach aims to improve the robustness of remotely sensed data processing by learning from diverse sets of observations while enabling near real-time and on-demand capabilities.

Geostationary↗

DOE OSTI2026

Synaptic Functionality and Neuromorphic Information Processing in Membrane Ion Channel Junctions

The human brain performs complex memory and computational tasks with high energy efficiency by regulating ion transport through membrane channels. These signaling mechanisms have been inspiring the development of nanofluidic memristors that emulate synaptic behavior. Here, in this study, we describe a membrane ion channel synapse (MICS), constructed from aqueous droplets linked by gramicidin A channels, that achieves neuromorphic functionality. MICS exhibits memristive ion transport with hysteretic current–voltage behavior arising from voltage-dependent channel formation and ion transport dynamics. MICS emulates a range of synaptic behaviors including associative learning. We further demonstrate its application in reservoir computing by performing handwritten digit classification and tic-tac-toe game and explore the system parameters that improve the computational performance. This droplet-based biomimetic synapse offers a potentially scalable and energy-efficient platform for next-generation neuromorphic computing systems.

Droplet interface bilayer↗

DOE OSTI2026

Demonstrating the data center as a flexible grid asset using a C-HIL setup

Increasing data center demand is outpacing grid infrastructure development. Artificial intelligence workloads and hyperscale cloud growth are creating unprecedented demand for power, while traditional grid expansion faces multiyear development timelines. Verrus is developing an innovative datacenter solution for this challenge, data centers that act as active grid-supportive assets rather than passive loads. Our approach integrates a novel grid-aware power flow management system with battery energy storage systems(BESS) into a microgrid-controlled, medium-voltage power distribution architecture that delivers critical capabilities, such as: * Fast response to grid disturbances such over/ under voltage or over/ under frequency * Demand flexibility that can service requests from the utility within 10 s * Uninterrupted transition to islanded operation during grid outages * Continuous uptime assurance for compute loads while maintaining all customer service level agreements. Through Verrus' strategic partnership with the National Renewable Energy Laboratory (NREL), these capabilities were validated using NREL's Advanced Research on Integrated Energy Systems (ARIES) virtual emulation environment to model a 70-MW grid-interactive data center. This paper outlines the design, methodology, and results of this emulated deployment, demonstrating that data centers can provide both critical load resilience and ancillary grid support without compromising uptime requirements. Specifically, we present a digital real time simulation of a 70 MW data center integrated with a physical microgrid controller, and demonstrate the data center response in the event of a grid voltage and frequency event, utility demand response request and utility outage.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2026

An efficient explicit implementation of a near-optimal quantum algorithm for simulating linear dissipative differential equations

We propose an efficient block-encoding technique for the implementation of the Linear Combination of Hamiltonian Simulations (LCHS) for simulating dissipative initial-value problems. This algorithm approximates a target nonunitary operator as a weighted sum of Hamiltonian evolutions, thereby emulating a dissipative problem by mixing various time scales. We introduce an efficient encoding of the LCHS into a quantum circuit based on a simple coordinate transformation that turns the dependence on the summation index into a trigonometric function. Classically, this method is equivalent to the use of a highly accurate Fejér-Clenshaw-Curtis quadrature formula. Quantumly, this significantly simplifies block-encoding of a dissipative problem and allows one to perform an exponential number of Hamiltonian simulations by a single Quantum Signal Processing (QSP) circuit. The resulting LCHS circuit has high success probability and the selector scales logarithmically with the number of terms in the LCHS sum and linearly with time. Careful analysis of error convergence proves that this method is more efficient than other LCHS circuits that have recently appeared in the literature. We verify the quantum circuit and its scaling by simulating it on a digital emulator of fault-tolerant quantum computers and, as a test problem, solve the advection-diffusion equation. The proposed algorithm can be used for simulating a wide class of nonunitary initial-value problems including the Liouville equation with added dissipation and linear embeddings of nonlinear systems, such as the Koopman-von Neumann and Carleman embeddings.

Novikau, I [Lawrence Livermore National Laboratory↗

DOE OSTI2025

Quantum Simulation of Molecular Dynamics Processes─A Benchmark Study Using a Classical Simulator and Present-Day Quantum Hardware

Here, we explore how the fundamental problems in quantum molecular dynamics can be modeled using classical simulators (emulators) of quantum computers and the actual quantum hardware available to us today. The list of problems we tackle includes propagation of a free wave packet, vibration of a harmonic oscillator, and tunneling through a barrier. Each of these problems starts with the initial wave packet setup. Although Qiskit provides a general method for initializing wave functions, in most cases it generates deep quantum circuits. While these circuits perform well on noiseless simulators, they suffer from excessive noise on quantum hardware. To overcome this issue, we designed a shallower quantum circuit for preparing a Gaussian-like initial wave packet, which improves the performance of real hardware. Next, quantum circuits are implemented to apply the kinetic and potential energy operators for the evolution of a wave function over time. The results of our modeling on classical emulators of quantum hardware agree perfectly with the results obtained using the traditional (classical) methods. This serves as a benchmark and demonstrates that the quantum algorithms and Qiskit codes we developed are accurate. However, the results obtained on the actual quantum hardware available today, such as IBM’s superconducting qubits and IonQ’s trapped ions, indicate large discrepancies due to hardware limitations. This work highlights both the potential and challenges of using quantum computers to solve fundamental quantum molecular dynamics problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Stable Machine‐Learning Parameterization of Subgrid Processes in a Comprehensive Atmospheric Model Learned From Embedded Convection‐Permitting Simulations

Modern climate projections often suffer from inadequate spatial and temporal resolution due to computational limitations, resulting in inaccurate representations of sub-grid processes. A promising technique to address this is the multiscale modeling framework (MMF), which embeds a kilometer-resolution cloud-resolving model (CRM) within each atmospheric column of a host climate model to replace traditional convection and cloud parameterizations. Machine learning offers a unique opportunity to make MMF more accessible by emulating the embedded CRM and reducing its substantial computational cost. Although many studies have demonstrated proof-of-concept success of achieving stable hybrid simulations, it remains a challenge to achieve near operational-level success with real geography and comprehensive variable emulation that includes, for example, explicit cloud condensate coupling. In this study, we present a stable hybrid model capable of integrating for at least 5 years with near operational-level complexity, including coarse-grid geography, seasonality, explicit cloud condensate and wind predictions, and land coupling. Our model demonstrates skillful online performance, achieving a 5-year zonal mean tropospheric temperature bias within 2 K, water vapor bias within 1 g/kg, and a precipitation root mean square error of 0.96 mm/day. Key factors contributing to our online performance include an expressive U-Net architecture and physical thermodynamic constraints for microphysics. With microphysical constraints mitigating unrealistic cloud formation, our work is the first to demonstrate realistic multi-year cloud condensate climatology under the MMF framework. Despite these advances, online diagnostics reveal persistent biases in certain regions, highlighting the need for innovative strategies to further optimize online performance.

Hu, Zeyuan [NVIDIA Corporation, Santa Clara, CA (U↗

DOE OSTI2026

A Framework for Parametric and Predictive Uncertainty Quantification in the E3SM Land Model: Assessing Site and Observable Generalizability

Quantifying parametric uncertainty using observations from individual sites provides a critical foundation for Earth system modeling, serving as a necessary first step before scaling up to regional or global applications. This study introduces a novel computational framework designed to enhance model predictability by reducing parametric uncertainty and assessing site and observable generalizability using various observational constraints. The framework integrates five components: Model Simulation, Statistical Emulation, Global Sensitivity Analysis (GSA), Model Calibration, and Model Prediction. Using the E3SM land model, we simulated site-level land-atmosphere carbon and energy fluxes from 2003 to 2007 across five evergreen needleleaf FLUXNET sites, perturbing 26 vegetation-related model parameters. Gaussian process emulators were employed to expedite GSA and model calibration. Four critical parameters that strongly influence selected land-atmosphere fluxes were identified by GSA. Bayesian approaches were used to infer parameter probability distributions leveraging synthetic data and FLUXNET observations. The results reveal that posterior parameter distributions vary significantly across different sites and observables within the same plant functional type. Probabilistic predictions indicate that parameters calibrated at one site can enhance predictive accuracy at other sites, although site heterogeneity may sometimes outweigh parametric uncertainty. Additionally, the probabilistic predictions demonstrate that calibration for one variable can also improve predictability for other variables, thereby maximizing predictive capabilities with limited observations. This framework provides a powerful approach for reducing parametric uncertainty in Earth system models and deepening our understanding of carbon dynamics and energy cycles. Its adaptability makes it a valuable tool for broader applications in Earth system modeling.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

A comparison between ShapeFit compression and Full-Modelling method with PyBird for DESI 2024 and beyond

DESI aims to provide one of the tightest constraints on cosmological parameters by analysing the clustering of more than thirty million galaxies. However, obtaining such constraints requires special care in validating the methodology and efforts to reduce the computational time required through data compression and emulation techniques. In this work, we perform a rigorous validation of the PyBird power spectrum modelling code with both a traditional emulated Full-Modelling approach and the model-independent ShapeFit compression approach. By using cubic box simulations that accurately reproduce the clustering and precision of the DESI survey, we find that the cosmological constraints from ShapeFit and Full-Modelling are consistent with each other at the ∼ 0.5σ level for the ΛCDM model. Both ShapeFit and Full-Modelling are also consistent with the true ΛCDM simulation cosmology down to a scale of k max = 0.20 hMpc -1 even after including the hexadecapole. For extended models such as the wCDM and the oCDM models, we find that including the hexadecapole can significantly improve the constraints and reduce the modelling errors with the same k max . While their discrepancies between the constraints from ShapeFit and Full-Modelling are more significant than ΛCDM, they remain consistent within 0.7σ. Lastly, we also show that the constraints on cosmological parameters with the correlation function evaluated from PyBird down to s min = 30h -1 Mpc are unbiased and consistent with the constraints from the power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Characterization of DESI fiber assignment incompleteness effect on 2-point clustering and mitigation methods for DR1 analysis

We present an in-depth analysis of the fiber assignment incompleteness in the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1). This incompleteness is caused by the restricted mobility of the robotic fiber positioner in the DESI focal plane, which limits the number of galaxies that can be observed at the same time, especially at small angular separations. As a result, the observed clustering amplitude is suppressed in a scale-dependent manner, which, if not addressed, can severely impact the inference of cosmological parameters. We discuss the methods adopted for simulating fiber assignment on mocks and data. In particular, we introduce the fast fiber assignment (FFA) emulator, which was employed to obtain the power spectrum covariance adopted for the DR1 full-shape analysis. We present the mitigation techniques, organised in two classes: measurement stage and model stage. We then use high fidelity mocks as a reference to quantify both the accuracy of the FFA emulator and the effectiveness of the different measurement-stage mitigation techniques. This complements the studies conducted in a parallel paper for the model-stage techniques, namely the θ-cut approach. We find that pairwise inverse probability (PIP) weights with angular upweighting recover the “true” clustering in all the cases considered, in both Fourier and configuration space. Notably, we present the first ever power spectrum measurement with PIP weights from real data.

cosmological simulations↗

DOE OSTI2024

Maximum a posteriori Ly α estimator (MAPLE): band power and covariance estimation of the 3D Ly α forest power spectrum

We present a novel maximum a posteriori estimator to jointly estimate band powers and the covariance of the three-dimensional power spectrum (P3D) of Ly $\alpha$ forest flux fluctuations, called MAPLE. Our Wiener-filter based algorithm reconstructs a window-deconvolved P3D in the presence of complex survey geometries typical for Ly $\alpha$ surveys that are sparsely sampled transverse to and densely sampled along the line of sight. We demonstrate our method on idealized Gaussian random fields with two selection functions: (i) a sparse sampling of 30 background sources per square degree designed to emulate the current Dark Energy Spectroscopic Instrument; (ii) a dense sampling of 900 background sources per square degree emulating the upcoming Prime Focus Spectrograph Galaxy Evolution Survey. Our proof-of-principle shows promise, especially since the algorithm can be extended to marginalize jointly over nuisance parameters and contaminants, i.e. offsets introduced by continuum fitting. Our code is implemented in JAX and is publicly available on GitHub.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Bayesian analysis of (3 +1)⁢D relativistic nuclear dynamics with the RHIC beam energy scan data

This work presents a Bayesian inference study for relativistic heavy-ion collisions in the beam energy scan program at the BNL Relativistic Heavy-Ion Collider. The theoretical model simulates event-by-event (3+1)-dimensional [(3+1)⁢D] collision dynamics using hydrodynamics and hadronic transport theory. We analyze the model's 20-dimensional posterior distributions obtained using three model emulators with different accuracy and demonstrate the essential role of training an accurate model emulator in the Bayesian analysis. Our analysis provides robust constraints on the quark-gluon plasma's transport properties and various aspects of (3+1)⁢D relativistic nuclear dynamics. By running full model simulations with 100 parameter sets sampled from the posterior distribution, we make predictions for p T -differential observables and estimate their systematic theory uncertainty. Here, a sensitivity analysis is performed to elucidate how individual experimental observables respond to different model parameters, providing useful physics insights into the phenomenological model for heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Enhancement of vibrationally assisted energy transfer by proximity to exceptional points, probed by fluorescence-detected vibrational spectroscopy

Emulation of energy transfer processes in natural systems on quantum platforms can further our understanding of complex dynamics in nature. One notable example is the demonstration of vibrationally assisted energy transfer (VAET) on a trapped-ion quantum emulator, which offers insights for the energetics of light harvesting. In this work, we expand the study of VAET simulation with trapped ions to a non-Hermitian quantum system comprising a 𝒫⁢𝑇-symmetric chromophore dimer weakly coupled to a vibrational mode. We first characterize exceptional points (EPs) and non-Hermitian features of the excitation energy transfer processes in the absence of the vibration, finding a degenerate pair of second-order EPs. Exploring the non-Hermitian dynamics of the whole system including vibrations, we find that energy transfer accompanied by absorption of phonons from a vibrational mode can be significantly enhanced near such a degenerate EP. Our calculations reveal a unique spectral feature accompanying the coalescing of eigenstates and eigenenergies that provides a unique approach to probe the degenerate EP by fluorescence-detected vibrational spectroscopy. Enhancement of the VAET process near the EP is found to be due to maximal favorability of phonon absorption at the degenerate EP, enabling multiple simultaneous excitations. Our work on improving VAET processes in non-Hermitian quantum systems paves the way for leveraging non-Hermiticity in quantum dynamics related to excitation energy transfer.

Non-Hermitian systems↗