Search NASA⌕ Search

SEARCH · Search NASA

Results for “energy methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The effect of hydroxyl spacing in diols on the solvation structure, dynamics, and transport properties of choline chloride-based deep eutectic solvents

Deep eutectic solvents (DESs) are a class of liquids that offer great potential in alleviating some of the challenges present in today's long-term energy storage methods because they have physical properties that are favorable for storable electrolyte solutions. In this work, a series of glycols (ethylene glycol, 1,3-propanediol, 1,4-butanediol, and 1,5-pentanediol) were studied as potential hydrogen bond donors (HBD) with a common choline chloride (ChCl) as the hydrogen bond acceptor (HBA). The solvation dynamics of the prepared systems were studied by measuring the solvent reorganization response using femtosecond transient absorption spectroscopy (fs-TA). Conductivity, viscosity, density, ET(30) polarity, and dynamics of the prepared DESs were analyzed, with a particular interest in determining the effect of HBD chain length on these parameters. Here, classical molecular dynamics simulations were employed to investigate how the local liquid structure, solvent dynamics, and bulk solvent properties vary with changes in glycol chain length.

Conductivity↗
DOE OSTI2020

Methodology for inferring reactor core power distribution from an optical fiber based gamma thermometer array

Here, a 4-step data analytic methodology has been devised for the purpose of inferring the distribution of power in a reactor core, based on the response of an array of optical fiber based gamma thermometers (OFBGTs). This data analytic methodology is crucial for the development of a system of OFBGTs for the purpose of calibrating local power range monitors in boiling water reactors. Such a system would be an improvement to the present calibration system in boiling water reactors, in terms of safety, efficiency, and permanence. The first step of this methodology is to establish an energy balance method. In this method, one uses MCNP to determine response functions, which allow one to convert from gamma thermometer response to power. The gamma thermometers and the reactor core are segmented, such that each gamma thermometer segment provides an estimate of power for each reactor core segment. The estimates of power for the reactor core segments (hereafter referred to as fuel assembly segments) are calculated based on the measured response of the gamma thermometers. The second step of the methodology is to employ a weighting scheme to combine the estimates of the power of the various fuel assembly segments, based on the response of the various OFGBT segments and the incremental dose rates of the various fuel assembly segments to the OFBGT segments. The third step is to iteratively calculate the estimates of the power of the fuel assembly segments, until a convergence criterion is met, which indicates that the calculation has converged. The fourth and final step of the methodology is to estimate the uncertainty of the power for each fuel assembly segment. The mathematical basis for this step is not the focus of this paper. We have used a 3-D homogeneous reactor model to demonstrate the data analytic methodology; and have found that the data analytic methodology operates as intended.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

A machine learning method of modern urban building energy modeling: A case study of Chicago

Urban-scale building energy modeling is vital for urban planning. However, it can be challenging to assimilate reliable non-geometry building data for urban-scale modeling without extensive investment. Here, this study introduces a novel approach to developing modern urban-scale building energy stock data using geographic information systems and machine learning algorithms without necessarily requiring pre-supplied non-geometric metadata. The proposed framework integrates building footprint and height data to estimate gross floor areas, and matches each building to a pool of candidate records from ComStock or ResStock—filtered to the same county and ranked by geometric similarity—demonstrate a proof-of-concept case study in Chicago for predicting energy use intensity (EUI) using scalable datasets. The model achieved a mean bias error (MBE) of 0.08 kWh/m² and root mean square error (RMSE) of 14.84 kWh/m² under full metadata input for EUI prediction. With only location inputs, the model captured 69.2 % of EUI within predicted ranges. These results demonstrate the model’s potential to support early-stage urban planning, identify candidates for energy-efficient retrofits. By removing the dependency on detailed pre-surveys or extensive building metadata, the approach overcomes a key barrier in traditional urban-scale building energy modeling, illustrating a pathway toward broader and more cost-effective application, though further multi-city validation and improved treatment of pre-1925 buildings are needed.

Energy Use Intensity↗
DOE OSTI2022

Ultra-fast microwave regeneration of CO 2 solid sorbents for energy-efficient direct air capture

Large-scale deployment of direct air capture (DAC) technologies has become critical for mitigating climate change. Towards this end, energy-efficient regeneration of the sorbents used in the process of carbon capture from air is very important to significantly reduce the high operational cost of DAC. Guanidine compounds can be used with environmentally friendly aqueous amino acids (e.g., potassium sarcosinate) for fast and effective CO 2 capture from air, and have a strong potential for low-energy CO 2 release and sorbent regeneration. In this process, the amino acid absorbs the CO 2 from the air, and the guanidine compounds react with the CO 2 -rich amino acid solution and crystallize as an insoluble carbonate salt. Separation and thermal regeneration of the precipitated guanidine carbonate salt leads to an overall low-temperature and low-energy direct air capture process. Effective CO 2 release from the solid guanidine compound can be achieved by mild heating at 120 °C. Here, in this study, to overcome the relatively inefficient traditional conductive heating of the crystalline solid (i.e., Methylglyoxal-bis(iminoguanidine) carbonate, MGBIG carbonate), we evaluated the feasibility of microwave heating of MGBIG carbonate in terms of power requirement, radiation time, and solids mass for efficient CO 2 desorption. The energy consumption needed by a microwave oven and a conventional oven to regenerate the same mass of the sorbent was directly measured to compare the total energy required per unit mass of regenerated sample and provide an understanding of the potential benefits of microwave regeneration. We found that microwave heating effectively regenerates MGBIG carbonate, which may be facilitated by the water molecules that are co-crystallized with carbonate in the guanidine crystals. Microwave heating at 2.54 GHz with 1250 W is up to 17 times faster than conventional conductive heating at 160 °C, resulting in 40 % electrical energy reduction. These results indicate that microwave regeneration may be an energy-efficient method for fast regeneration of solid sorbents used for direct air capture.

42 ENGINEERING↗
DOE OSTI2024

Removing Fluoride from Double Four-Membered Rings Yielding Defect-Free Zeolites under Mild Conditions Using Ozone

We have investigated ozone treatment of as-made LTA zeolites under mild temperature conditions (175 °C) using experiments and periodic DFT as a method of energy savings and engineering defects such as silanol nests in comparison with conventional calcination at 550 °C. We have studied ozone treatment on LTA samples synthesized with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium (denoted as “BULKY”) as the primary organic structure-directing agent (OSDA) and with various amounts of tetramethylammonium (TMA) as a secondary OSDA. Ozone treatment of LTA-BULKY at 175 °C was found to give defect-free, pristine LTA materials as determined by 29 Si NMR, 13 C NMR, Raman spectra, and DFT to assign the spectra. This represents a significant and unexpected finding: that fluoride ions can be completely removed from double four-membered rings (D4Rs) under such mild conditions. Furthermore, ozone treatment of LTA-BULKY-TMA samples removed BULKY but left behind TMA/F, giving a new and more diverse structural landscape of Si environments in LTA. Ab initio MetaDynamics calculations provide pathways with relatively low barriers, explaining how fluoride ions can be removed from D4Rs, leaving behind defect-free LTA materials under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of Electromagnetic Fields on Gypsum and Silica Scaling in Reverse Osmosis

Electromagnetic field (EMF) is a cost-effective, simple, and energy-efficient method for scale control in reverse osmosis (RO) systems. However, its effects on gypsum and silica scaling, as well as the underlying mechanisms, remain poorly understood. This study systematically investigates the effects of EMF treatment on gypsum and silica scaling in RO systems, utilizing synthetic brackish water and natural RO concentrate (ROC) from a desalination facility. For gypsum, EMF changes the crystal morphology, resulting in the formation of a porous, less compact scaling layer. It is more readily removed through hydraulic flushing (HF), enhancing scaling reversibility and water recovery. In the case of silica scaling, EMF promotes homogeneous polymerization in the bulk solution, producing larger silica particles that inhibit the formation of a dense, cross-linked gel layer on the membrane surface, mitigating flux decline. This study thus demonstrates EMF’s effectiveness in controlling gypsum scaling in undersaturated feedwaters when combined with HF and in mitigating silica scaling under both HF and non-HF conditions for supersaturated feedwaters. These findings underscore EMF’s versatility as a nonchemical approach for scale control in RO desalination and show its substantial potential to enhance membrane performance and operational efficiency in real-world water treatment applications.

Du, Xuewei [New Mexico State University, Las Cruce↗
DOE OSTI2023

Parallel Implementation of Nonadditive Gaussian Process Potentials for Monte Carlo Simulations

A strategy is presented to implement Gaussian process potentials in molecular simulations through parallel programming. Attention is focused on the three-body nonadditive energy, though all algorithms extend straightforwardly to the additive energy. The method to distribute pairs and triplets between processes is general to all potentials. Results are presented for a simulation box of argon, including full box and atom displacement calculations, which are relevant to Monte Carlo simulation. Data on speed-up are presented for up to 120 processes across four nodes. A 4-fold speed-up is observed over five processes, extending to 20-fold over 40 processes and 30-fold over 120 processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

3D-Printed Porous Supramolecular Sorbents for Cobalt Recycling

Electronic waste recycling is a recognized global challenge that requires new strategies to bind and release critical materials selectively, such as cobalt present in lithium-ion batteries. To address this challenge, hierarchical 3D-printed porous polymer scaffolds bearing supramolecular receptors were prepared using vat photopolymerization and their cobalt binding profiles were examined as a function of matrix polarity. By combining high-resolution digital light processing (DLP) with polymerization-induced phase separation (PIPS), functional acrylic copolymer networks with micrometer-level precision of geometry and nanometer-level pores were generated. Covalent integration of a methacrylate-functionalized bisdicyclohexyl acetamide (BDCA-MA) receptor enabled binding and release of cobalt(II) chloride (CoCl 2 ) via a solvent polarity switch mechanism involving a change in solvent from ethanol to water. The present structures proved reusable as shown by sustained high binding efficiency over five bind and release cycles. Finally, this platform represents a “green” and energy conscious method for future electronic waste recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Basin-Size Mapping: Prediction of Metastable Polymorph Synthesizability Across TaC–TaN Alloys

The sizes of the basins of attraction on the potential energy surface are helpful indicators in determining the experimental synthesizability of metastable phases. In principle, these basins can be controlled with changes in thermodynamic conditions such as composition, pressure, and surface energy. Herein, we use random structure sampling to computationally study how alloying smoothly perturbs basin of attraction sizes. The TaC 1-x N x pseudobinary is an ideal test system given the structural and polymorphic contrast of its parent compounds and their technological relevance as epitaxial substrates for Al 1-x Ga x N. While we find limited thermodynamic stability across all computationally observed phases, random structure sampling shows a significant composition region where the rocksalt basin dominates. As such, we predict the potential for the nonequilibrium synthesis of metastable rocksalt TaC 1-x N x alloys as substrates for Al 1-x Ga x N. At higher nitrogen concentrations, other low-energy metastable polymorphs emerge that continue to retain the hexagonal close packing suitable for III-N growth. Confidence in these trends was established through uncertainty quantification of the basin sizes and energy distributions; such analysis utilized the Beta and Dirichlet distributions. In conclusion, we also find (a) polymorph basin sizes can be rationalized in terms of energetic preferences for different coordination environments; and (b) basin sizes universally shrink with increasing nitrogen content, making the system more prone to amorphous growth.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dry Deposition Methods Based on Turbulence Kinetic Energy: 1. Evaluation of Various Resistances and Sensitivity Studies Using a Single‐Point Model

Different functions are used to account for turbulence strength in the atmospheric boundary layer for different stability regimes. These functions are one of the sources for differences among different atmospheric models' predictions and associated biases. Also, turbulence strength is underrepresented in some of the resistance formulations. Here, to address these issues with dry deposition, firstly we take advantage of three‐dimensional (3‐D) turbulence information in estimating resistances by proposing and validating a 3‐D turbulence velocity scale that is relevant for different stability regimes of boundary layer. Secondly, we hypothesize and validate that friction velocity measured by 3‐D sonic anemometer can be effectively replaced by the new turbulence velocity scale multiplied by the von Karman constant. Finally, we (a) present a set of resistance formulations for ozone (O 3 ) based on the 3‐D turbulence velocity scale; (b) intercompare estimations of such resistances with those obtained using existing formulations; and, (c) evaluate simulated O 3 fluxes using a single‐point dry deposition model against long‐term observations of O 3 fluxes at the Harvard Forest (MA) site. Results indicate that the new resistance formulations work very well in simulating surface latent heat and O 3 fluxes when compared to respective existing formulations and measurements at a decadal time scale. Findings from this research may help to improve the capability of dry deposition schemes for better estimation of dry deposition fluxes and create opportunities for the development of a community dry deposition model for use in regional/global air quality models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Modeling the impact of structure and coverage on the reactivity of realistic heterogeneous catalysts

Adsorbates often cover the surfaces of catalysts densely as they carry out reactions, dynamically altering their structure and reactivity. Understanding adsorbate-induced phenomena and harnessing them in our broader quest for improved catalysts is a substantial challenge that is only beginning to be addressed. Here, in this work, we chart a path toward a deeper understanding of such phenomena by focusing on emerging in silico modeling methodologies, which will increasingly incorporate machine learning techniques. We first examine how adsorption on catalyst surfaces can lead to local and even global structural changes spanning entire nanoparticles, and how this affects their reactivity. We then evaluate current efforts and the remaining challenges in developing robust and predictive simulations for modeling such behavior. Last, we provide our perspectives in four critical areas—integration of artificial intelligence, building robust catalysis informatics infrastructure, synergism with experimental characterization, and adaptive modeling frameworks—that we believe can help surmount the remaining challenges in rationally designing catalysts in light of these complex phenomena.

catalytic mechanisms↗
DOE OSTI2022

Simulations of nonradiative processes in semiconductor nanocrystals

The description of carrier dynamics in spatially confined semiconductor nanocrystals (NCs), which have enhanced electron–hole and exciton–phonon interactions, is a great challenge for modern computational science. These NCs typically contain thousands of atoms and tens of thousands of valence electrons with discrete spectra at low excitation energies, similar to atoms and molecules, that converge to the continuum bulk limit at higher energies. Computational methods developed for molecules are limited to very small nanoclusters, and methods for bulk systems with periodic boundary conditions are not suitable due to the lack of translational symmetry in NCs. This perspective focuses on our recent efforts in developing a unified atomistic model based on the semiempirical pseudopotential approach, which is parameterized by first-principle calculations and validated against experimental measurements, to describe two of the main nonradiative relaxation processes of quantum confined excitons: exciton cooling and Auger recombination. Here, we focus on the description of both electron–hole and exciton–phonon interactions in our approach and discuss the role of size, shape, and interfacing on the electronic properties and dynamics for II–VI and III–V semiconductor NCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

De novo design of small beta barrel proteins

Small beta barrel proteins are attractive targets for computational design because of their considerable functional diversity despite their very small size (<70 amino acids). However, there are considerable challenges to designing such structures, and there has been little success thus far. Because of the small size, the hydrophobic core stabilizing the fold is necessarily very small, and the conformational strain of barrel closure can oppose folding; also intermolecular aggregation through free beta strand edges can compete with proper monomer folding. Here, we explore the de novo design of small beta barrel topologies using both Rosetta energy–based methods and deep learning approaches to design four small beta barrel folds: Src homology 3 (SH3) and oligonucleotide/oligosaccharide-binding (OB) topologies found in nature and five and six up-and-down-stranded barrels rarely if ever seen in nature. Both approaches yielded successful designs with high thermal stability and experimentally determined structures with less than 2.4 Å rmsd from the designed models. Using deep learning for backbone generation and Rosetta for sequence design yielded higher design success rates and increased structural diversity than Rosetta alone. The ability to design a large and structurally diverse set of small beta barrel proteins greatly increases the protein shape space available for designing binders to protein targets of interest.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The LSST DESC data challenge 1: generation and analysis of synthetic images for next-generation surveys

Data Challenge 1 (DC1) is the first synthetic data set produced by the Rubin Observatory Legacy Survey of Space and Time (LSST) Dark Energy Science Collaboration (DESC). DC1 is designed to develop and validate data reduction and analysis and to study the impact of systematic effects that will affect the LSST data set. DC1 is comprised of r -band observations of 40 deg 2 to 10 yr LSST depth. In this paper, we present each stage of the simulation and analysis process: (a) generation, by synthesizing sources from cosmological N -body simulations in individual sensor-visit images with different observing conditions; (b) reduction using a development version of the LSST Science Pipelines; and (c) matching to the input cosmological catalogue for validation and testing. We verify that testable LSST requirements pass within the fidelity of DC1. We establish a selection procedure that produces a sufficiently clean extragalactic sample for clustering analyses and we discuss residual sample contamination, including contributions from inefficiency in star–galaxy separation and imperfect deblending. We compute the galaxy power spectrum on the simulated field and conclude that: (i) survey properties have an impact of 50 per cent of the statistical uncertainty for the scales and models used in DC1; (ii) a selection to eliminate artefacts in the catalogues is necessary to avoid biases in the measured clustering; and (iii) the presence of bright objects has a significant impact (2σ–6σ) in the estimated power spectra at small scales (ℓ > 1200), highlighting the impact of blending in studies at small angular scales in LSST.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

SALT2 versus SALT3: updated model surfaces and their impacts on type Ia supernova cosmology

ABSTRACT For the past decade, SALT2 has been the most common model used to fit Type Ia supernova (SN Ia) light curves for dark energy analyses. Recently, the SALT3 model was released, which upgraded a number of model features but has not yet been used for measurements of dark energy. Here, we evaluate the impact of switching from SALT2 to SALT3 for a SN cosmology analysis. We train SALT2 and SALT3 on an identical training sample of 1083 well-calibrated Type Ia supernovae, ensuring that any differences found come from the underlying model framework. We publicly release the results of this training (the SALT ‘surfaces’). We then run a cosmology analysis on the public Dark Energy Survey 3-Yr Supernova data sample (DES-SN3YR), and on realistic simulations of those data. We provide the first estimate of the SN + CMB systematic uncertainty arising from the choice of SALT model framework (i.e. SALT2 versus SALT3), Δw = + 0.001 ± 0.005 – a negligible effect at the current level of dark energy analyses. We also find that the updated surfaces are less sensitive to photometric calibration uncertainties than previous SALT2 surfaces, with the average spectral energy density dispersion reduced by a factor of two over optical wavelengths. This offers an opportunity to reduce the contribution of calibration errors to SN cosmology uncertainty budgets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A comprehensive framework to assess elemental mercury in the Department of Energy: A descriptive analysis

Objective: This study investigated the relationship between personal breathing zone air samples and associated biological monitoring urine samples collected in the U.S. Department of Energy Operations. Methods: We performed standard descriptive analyses of the air sample and BEI monitoring data. We also provide a list of direct-reading instruments used in mercury field assessments. Results: A total of 2,330 air samples and 265 BEI data were analyzed. These data were grouped into 16 job titles, excluding categories with fewer than 10 samples, which resulted in 11 job titles. Conclusions: We conclude that industrial hygiene airborne sample data alone may not provide a complete assessment in exposure determination. We suggested the necessity of incorporating biological monitoring to determine the exposure.

60 APPLIED LIFE SCIENCES↗