Search NASA⌕ Search

SEARCH · Search NASA

Results for “error indicators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Toward a CFD nose-to-tail capability - Hypersonic unsteady Navier-Stokes code validation

Computational fluid dynamics (CFD) research for hypersonic flows presents new problems in code validation because of the added complexity of the physical models. This paper surveys code validation procedures applicable to hypersonic flow models that include real gas effects. The current status of hypersonic CFD flow analysis is assessed with the Compressible Navier-Stokes (CNS) code as a case study. The methods of code validation discussed to beyond comparison with experimental data to include comparisons with other codes and formulations, component analyses, and estimation of numerical errors. Current results indicate that predicting hypersonic flows of perfect gases and equilibrium air are well in hand. Pressure, shock location, and integrated quantities are relatively easy to predict accurately, while surface quantities such as heat transfer are more sensitive to the solution procedure. Modeling transition to turbulence needs refinement, though preliminary results are promising.

Edwards, Thomas A.↗

Fluctuating pressures measured beneath a high-temperature, turbulent boundary layer on a flat plate at Mach number of 5

Fluctuating pressures were measured beneath a Mach 5, turbulent boundary layer on a flat plate with an array of piezoresistive sensors. The data were obtained with a digital signal acquisition system during a test run of 4 seconds. Data sampling rate was such that frequency analysis up to 62.5 kHz could be performed. To assess in situ frequency response of the sensors, a specially designed waveguide calibration system was employed to measure transfer functions of all sensors and related instrumentation. Pressure time histories were approximated well by a Gaussian prohibiting distribution. Pressure spectra were very repeatable over the array span of 76 mm. Total rms pressures ranged from 0.0017 to 0.0046 of the freestream dynamic pressure. Streamwise, space-time correlations exhibited expected decaying behavior of a turbulence generated pressure field. Average convection speed was 0.87 of freestream velocity. The trendless behavior with sensor separation indicated possible systematic errors.

Parrott, Tony L.↗

A comparison of vertical velocity in cirrus obtained from aircraft and lidar divergence measurements during FIRE

Techniques are presented to obtain vertical velocity (w) in cirrus clouds from in situ aircraft lateral wind measurements and from ground-based remote Doppler lidar measurements. In general, direct measurements of w from aircraft are not feasible because of offsets in the air velocity sensors. An alternative is to calculate w from the integral of the divergence of the horizontal velocity around a closed path. This technique is applied to a cirrus cloud investigated during the FIRE Cirrus Intensive Field Observation Program. The results indicate that the error in w is about + or - 14 cm/sec from the aircraft technique; this can be reduced to about + or - 2-3 cm/sec with technical improvements in both ground-speed and lateral-velocity measurements. The error in w from Doppler lidar measurements, which is about + or - 8 cm/sec can be reduced to about + or - 5 cm/sec by improvements in the Doppler velocity measurements with technology that is currently available.

Gultepe, I.↗

A tone-aided dual vestigial sideband system for digital communications on fading channels

A spectrally efficient tone-aided dual vestigial sideband (TA/DVSB) system for digital data communications on fading channels is presented and described analytically. This PSK (phase-shift-keying) system incorporates a feed-forward, tone-aided demodulation technique to compensate for Doppler frequency shift and channel- induced, multipath fading. In contrast to other tone-in-band-type systems, receiver synchronization is derived from the complete data VSBs. Simulation results for the Rician fading channel are presented. These results demonstrate the receiver's ability to mitigate performance degradation due to fading and to obtain proper data carrier synchronization, suggesting that the proposed TA/DVSB system has promise for this application. Simulated BER (bit-error rate) data indicate that the TA/DVSB system effectively alleviates the channel distortions of the land mobile satellite application.

Hladik, Stephen M.↗

Determination of washout performance of various monochrome displays under simulated flight ambient and solar lighting conditions

The aircraft cockpit ambient lighting simulation system (ACALSS) has been developed to study display readability and associated pilot/vehicle performance effects in a part-task simulator cockpit. In the study reported here, the ACALSS was used to determine the illumination levels at which subjects lose the ability to maintain aircraft states when using three display technologies as display media for primary flight displays: a standard monochrome EL (electroluminescent) flat-panel, a laboratory-class monochrome CRT, and an enhanced-brightness EL flat-panel. The multivariate statistical technique of modified profile analysis was used to test for performance differences between display devices as functions of illumination levels. The standard monochrome EL flat-panel display began to washout after the 2500 foot-candle level of illumination. The monochrome CRT began to washout after the 5500 foot-candle level of illumination. No performance decrements by increased illumination up to the 12,000 foot-candle level were found for the enhanced-brightness EL flat-panel display. What was not anticipated was that half the subjects would subjectively prefer the CRT over the enhanced-brightness EL, even though their performance errors would have indicated the opposite.

Batson, Vernon M.↗

The TOPSAR interferometric radar topographic mapping instrument

We have augmented the NASA DC-8 Airborne Synthetic Aperture Radar (AIRSAR) instrument with a pair of C-band antennas displaced across the track to form an interferometer sensitive to topographic variations of the Earth's surface. The antennas were developed by Alenia Spazio under the sponsorship of the Italian Space Agency (ASI), and the AIRSAR instrument and modifications to it supporting TOPSAR were sponsored by NASA. A new data processor was developed at JPL for producing the topographic maps. As of May 1991, one engineering flight line over San Francisco, CA was reduced to a cartographically rectified topographic map. Analysis of the results indicates that statistical errors are in the range of 2 to 4 m, while systematic effects due to aircraft motion are in the range of 6 to 12 m. Future aircraft motion compensation algorithms should reduce the systematic variations to near zero, while the statistical errors could likely be reduced to 2 m or less with some processor improvements.

Zebker, Howard A.↗

Adaptive mesh strategies for the spectral element method

An adaptive spectral method was developed for the efficient solution of time dependent partial differential equations. Adaptive mesh strategies that include resolution refinement and coarsening by three different methods are illustrated on solutions to the 1-D viscous Burger equation and the 2-D Navier-Stokes equations for driven flow in a cavity. Sharp gradients, singularities, and regions of poor resolution are resolved optimally as they develop in time using error estimators which indicate the choice of refinement to be used. The adaptive formulation presents significant increases in efficiency, flexibility, and general capabilities for high order spectral methods.

Mavriplis, Catherine↗

Mass balance assessment using GPS

Mass balance is an integral part of any comprehensive glaciological investigation. Unfortunately, it is hard to determine at remote locations where there is no fixed reference. The Global Positioning System (GPS) offers a solution. Simultaneous GPS observations at a known location and the remote field site, processed differentially, will accurately position the camp site. From there, a monument planted in the firn atop the ice can also be accurately positioned. Change in the monument's vertical position is a direct indicator of ice thickness change. Because the monument is not connected to the ice, its motion is due to both mass balance change and to the settling of firn as it densifies into ice. Observations of relative position change between the monument and anchors at various depths within the firn are used to remove the settling effect. An experiment to test this method has begun at Byrd Station on the West Antarctic Ice Sheet and the first epoch of observations was made. Analysis indicates that positioning errors will be very small. It appears likely that the largest errors involved with this technique will arise from ancillary data needed to determine firn settling.

Hulbe, Christina L.↗

The TOPSAR interferometric radar topographic mapping instrument

The NASA DC-8 AIRSAR instrument has been augmented with a pair of C-band antennas displaced across track to form an interferometer sensitive to topographic variations of the earth's surface. During the 1991 DC-8 flight campaign, data were acquired over several sites in the U.S. and Europe, and topographic maps were produced from several of these flight lines. Analysis of the results indicate that statistical errors are in the 2-4 m range, while systematic effects due to aircraft motion are in the 10-20 m range. Initial results from development of a second generation processor at JPL show that aircraft motion compensation algorithms reduce the systematic variations to 2 m, while the statistical errors are reduced to 2-3 m.

Zebker, Howard A.↗

(C-12)/(C-13) isotope ratio in the local interstellar medium from observations of (C-13)(O-18) in molecular clouds

The paper examines the (C-12)/(C-13) isotope ratio in the solar neighborhood on the basis of observations of the (C-12)(O-18) and (C-13)(O-18) J = 1-0 transitions in four interstellar clouds located within 500 pc. The (C-12)/(C-13) ratio in these sources ranges from 57 to 74, and its weighted average is 62 +/- 4, with thermal noise and line formation uncertainties contributing about equally to the probable error. These values indicate moderate chemical evolution in the local star neighborhood since the formation of the solar system, in good agreement with model prediction of the current carbon ratio in the local interstellar medium.

Langer, William D.↗

The occultation of 28 Sgr by Saturn - Saturn pole position and astrometry

Saturn's ring plane-defined pole position is presently derived from the geometry of Saturn's July 3, 1989 occultation of 28 Sgr, as indicated by the timings of 12 circular edges in the Saturn C-ring as well as the edges of the Encke gap and the outer edge of the Keeler gap. The edge timings are used to solve for the position angle and opening angle of the apparent ring ellipses; the internal consistency of the data set and the redundancy of stations indicates an absolute error of the order of 5 km. The pole position thus obtained is consistent with the pole and ring radius scale derived from Voyager occultation observations.

Hubbard, W. B.↗

The TOPSAR interferometric radar topographic mapping instrument

The NASA DC-8 AIRSAR instrument was augmented with a pair of C-band antennas displaced across track to form an interferometer sensitive to topographic variations of the Earth's surface. The antennas were developed by the Italian consortium Co.Ri.S.T.A., under contract to the Italian Space Agency (ASI), while the AIRSAR instrument and modifications to it supporting TOPSAR were sponsored by NASA. A new data processor was developed at JPL for producing the topographic maps, and a second processor was developed at Co.Ri.S.T.A. All the results presented below were processed at JPL. During the 1991 DC-8 flight campaign, data were acquired over several sites in the United States and Europe, and topographic maps were produced from several of these flight lines. Analysis of the results indicate that statistical errors are in the 2-3 m range for flat terrain and in the 4-5 m range for mountainous areas.

Zebker, Howard A.↗

A proposed update to the solar irradiance spectrum used in LOWTRAN and MODTRAN

The calibrated upwelling radiance spectra measured by AVIRIS are increasingly being analyzed with radiative transfer codes. Analysis of AVIRIS data with the LOWTRAN and MODTRAN radiative transfer codes has led to indications of an error in the solar irradiance spectra used by these codes. This paper presents evidence for the error and proposed update to the solar irradiance spectra used by LOWTRAN and MODTRAN.

Green, Robert O.↗

Coupled-Cluster Theory Employing Approximate Integrals: An Approach to Avoid the Input/Output and Storage Bottlenecks

By representing orbital products in an expansion basis, certain classes of two-electron integrals are approximated for use in CCSD(T) calculations (singles and doubles coupled-cluster plus a perturbational estimate of the effects of connected triple excitations). This leads to a very large reduction in disk storage and input/output requirements, with usually only a modest increase in computational effort. The new procedure will allow very large CCSD(T) calculations to be undertaken, limited only by available processor time. Using the molecular basis as the expansion basis, explicit numerical comparisons of equilibrium geometries, harmonic frequencies, and energy differences indicate that the error due to the use of approximate integrals is less than the error associated with truncation of the molecular basis set.

Rendell, Alistair P.↗

Surface Soil Moisture Retrieval Using SSM/I and Its Comparison with ESTAR: A Case Study Over a Grassland Region

This study extends a previous investigation on estimating surface soil moisture using the Special Sensor Microwave/Imager (SSM/I) over a grassland region. Although SSM/I is not optimal for soil moisture retrieval, it can under some conditions provide information. Rigorous analyses over land have been difficult due to the lack of good validation data sets. A scientific objective of the Southern Great Plains 1997 (SGP97) Hydrology Experiment was to investigate whether the retrieval algorithms for surface soil moisture developed at higher spatial resolution using truck-and aircraft-based passive microwave sensors can be extended to the coarser resolutions expected from satellite platform. With the data collected for the SGP97, the objective of this study is to compare the surface soil moisture estimated from the SSM/I data with those retrieved from the L-band Electronically Scanned Thinned Array Radiometer (ESTAR) data, the core sensor for the experiment, using the same retrieval algorithm. The results indicated that an error of estimate of 7.81% could be achieved with SSM/I data as contrasted to 2.82% with ESTAR data over three intensive sampling areas of different vegetation regimes. It confirms the results of previous study that SSM/I data can be used to retrieve surface soil moisture information at a regional scale under certain conditions.

Jackson, T.↗

Massive Star Formation in NGC4038/4039: HII Regions and Supernova Remnants in "The Antennae"

The nearest merger, NGC4038/4039 ("The Antennae, Arp244), is undergoing a starburst apparently triggered and driven by the ongoing interaction. The system provides an excellent laboratory to study star formation processes because well-studied and nearby (21 Mpc assumed here). Models of the interaction suggest that the interaction's first periapse occurred 200 Myr ago, and that final coalescence will occur in another 100 Myr. Blue and H alpha images show a continuous loop of bright knots around the NGC4038 (northern) nucleus, continuing down through the NGC4039 (southern) nucleus. Recent HST V and I images resolve the star-forming knots into several thousand blue compact clusters, with ages 5Myr for the youngest clusters. Far Ultraviolet (lambda 1500A) observations directly detect O and B stars in regions of low extinction; the total mass of young stars so observed is approximately 8 x 10 (exp 5) solar mass. FIR observations imply a star formation rate of approximately 5 M (sub 0) dot yr (sup -1) or greater. We used the VLA at 6 and 4 cm to obtain high resolution radio images of the star-formation regions in NGC4038/4038. We used high resolution imaging to identify compact radio emitting regions and spectral indices of the compact regions to differentiate between thermal sources such as HII regions (flat spectra) and supernova, remnants (steep spectra). We found that compact radio sources produce approximately 12% and/sim 25 strongest radio emission occurs between the galaxies, at an optically unremarkable location near but not coincident with an extremely red cluster. The radio peak is at a location of intense star formation (as detected in the mid-IR, reference?) and of dense molecular gas. We identify 115 individual compact 6cm radio sources and 63 individual 4 cm sources in the system, to a limiting luminosity of approximately 2 x 10 (exp 1) 8 W Hz (sup -1) (or /sim4x the luminosity of Cas A). Of the strongest sources, for which the h flux densities are large enough to measure spectral indices with reasonable errors, we find that one third have nominally flat radio spectra (presumeable dominated by thermal emission from HII regions) and two thirds have nominally steep spectra (presumeably dominated by synchrotron emission from supernova, remnants). For the thermal sources, we derive typical masses of 10 (exp 4) to 10 (exp 5) solar mass in massive young stars and ionized gas masses of 10 (exp 3) - 10 (exp 4) solar mass. From the steep-spectrum sources, we derive a total system supernova rate of 0.2-0.3 yr (sup -1), about an order of magnitude larger than that expected from the currently observed O-star population. Taken together, these suggest that that a large number of O stars may have formed in the system in a short-lived burst, less than 10 (exp 6) yr in duration and about 3-4 Myr ago.

Neff, S. G.↗

Neural Network Prediction of Failure of Damaged Composite Pressure Vessels from Strain Field Data Acquired by a Computer Vision Method

This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,

Russell, Samuel S.↗

Three Dimensional Cross-Sectional Properties From Bone Densitometry

Bone densitometry has previously been used to obtain cross-sectional properties of bone in a single scan plane. Using three non-coplanar scans, we have extended the method to obtain the principal area Moments of inertia and orientations of the principal axes at each cross-section along the length of the scan. Various 5 aluminum phantoms were used to examine scanner characteristics to develop the highest accuracy possible for in vitro non-invasive analysis of mass distribution. Factors considered included X-ray photon energy, initial scan orientation, the included angle of the 3 scans, and Imin/Imax ratios. Principal moments of inertia were accurate to within 3.1% and principal angles were within 1 deg. of the expected value for phantoms scanned with included angles of 60 deg. and 90 deg. at the higher X-ray photon energy. Low standard deviations in error also 10 indicate high precision of calculated measurements with these included angles. Accuracy and precision decreased slightly when the included angle was reduced to 30 deg. The method was then successfully applied to a pair of excised cadaveric tibiae. The accuracy and insensitivity of the algorithms to cross-sectional shape and changing isotropy (Imin/Imax) values when various included angles are used make this technique viable for future in vivo studies.

Cleek, Tammy M.↗