Search NASA⌕ Search

SEARCH · Search NASA

Results for “ethylene selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap

Annually, 20–55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical Recycling of Mixed Plastics and Valuable Metals in the Electronic Waste Using Solvent-Based Processing

Annually, 20-55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

A multiscale packed-bed reactor model for sustainable ethylene production via chemical looping oxidative coupling of methane

The rising global warming concerns and shale gas discovery have prompted research in the direction of greenhouse gas (GHG), such as methane, reduction and conversion. Oxidative coupling of methane (OCM) offers a pathway to low carbon-intense valorization of methane while producing ethylene, a chemical regarded as central to the petrochemical industry. Even after decades of OCM discovery, researchers keep understanding the process and underlying chemical reactions in a pursuit to achieve industrial viability for OCM. Here, in general, OCM suffers from low C 2 selectivity, yield and reactor temperature runaways due to highly exothermic nature of its reactions. Computational Fluid Dynamics (CFD) tools help analyze spatial gradients within the reactor to deeply understand the diffusion of species, mass and heat transfer phenomena. Furthermore, challenges associated with scaling up such as hot spot formation and parametric sensitivity can be addressed without having to expend on costly experiments. The current paper presents a multiscale packed-bed reactor CFD model coupled with a chemical kinetic model for the chemical looping OCM. The CFD model includes two scales i.e., macroscale for catalyst bed and microscale for individual pellets. Moreover, a chemical kinetic model based on 10 gas-phase reactions is integrated with the CFD model. An additional surface reaction for the formation of gas-phase oxygen from catalyst surface is added to account for the absence of feed oxygen. The model is calibrated against experimental results. The calibrated model captures trends in CH 4 conversion, C 2 selectivity and C 2 yield within a ± 4.35 % range across a temperature range of 700-900 °C. Moreover, model fidelity is evaluated by varying key computational parameters such as mesh resolution and time step size. The model is also verified by varying the inlet methane concentration and the gas hourly space velocity (GHSV) and comparing the results with literature. A sensitivity analysis and scale-up of the current model is undergoing.

Chemical looping↗
NASA NTRS1982

A review of acetylene, ethylene and ethane molecular spectroscopy for planetary applications

Spectroscopic work in acetylene, ethylene and ethane, are of particular interest since the Voyager IRIS observations of Jupiter. Acetylene and ethane but not ethylene were observed in the Jovian spectrum. Two fundamental bands of the observed gases are used to determine the spatial distribution of these hydrocarbons on Jupiter and to illuminate the photochemistry of these species. The 100 to 1000 cm region is discussed and selected examples of current laboratory work are given.

Maguire, W. C.↗
DOE OSTI2022

High-performance of CrOx/HZSM-5 catalyst on non-oxidative dehydrogenation of C 2 H 6 to C 2 H 4 : Effect of supporting materials and associated mechanism

Ethane (C 2 H 6 ) is an important inexpensive and widely available fuel resource. High-value use of C 2 H 6 has become increasingly important. Catalytic dehydrogenation of C 2 H 6 to ethylene (C 2 H 4 ) has attracted much attention in recent years due to its high energy efficiency. The direct non-oxidative ethane dehydrogenation (EDH) to ethylene is a promising strategy to produce ethylene and hydrogen at the same time. In this research, Cr/HZSM-5 catalyst with superior stability was synthesized and exhibited an C 2 H 6 converting activity of 1.47 µmol/(g·s) with the corresponding C 2 H 6 conversion and C 2 H 4 selectivity of 37.3% and 90%, respectively. Herein, the synergistic effects of Si and Al in supporting materials were investigated by comparing Cr/HZSM-5 with SBA-15, SiO 2 and Al 2 O 3 supported ones, which contains either Al or Si with different structures. Characterization results indicated that the intimate interactions between Cr and support significantly improved the catalytic performance. The presence of Al in the support promoted the formation of more active Cr 6+ species by forming the aluminum-chromium-chromate (Cr-O-Al) structures which were more efficient to active C-H bond and form (Cr, Al)-OH groups during the reaction. Meanwhile, the formation of internal silanol group with the dissociative adsorbed H* could stabilized the active Cr phase to achieve a stable dehydrogenation activity.

03 NATURAL GAS↗
NASA NTRS1993

ASRM Case Insulation development

The ASRM Case Insulation Program used design of experiments to develop a high performance case insulation. The program traded-off more than thirty properties in areas of ablation performance, material properties, processibility, bonding/aging. Kevlar pulp was found to be the most significant factor. The low-molecular weight ethylene propylene diene monomer, EPDM was the second most significant factor. The curative was the third most significant factor. The tackifier was the fourth most significant factor. The stripwinding process for applying the insulation onto the case inner surfaces was also studied. The parameters selected for experiment were extruder speed, upper roller temperature and extruder nozzle temperature. The extrudability results showed that non-Kevlar filled formulations displayed optimum edges but poor thickness continuity. High Kevlar filled formulations displayed optimum thickness continuity but poor strip edge ratings.

Tam, W. F. S.↗
DOE OSTI2023

Electrochemical conversion of methane to ethylene, olefins, and paraffins using metal-supported solid oxide cells

Electrochemical oxidative coupling of methane (E-OCM) with Sr 2 Fe 1·5 Mo 0·5 O 6–δ (SFM) catalyst is demonstrated with metal-supported solid oxide cells (MS-SOC). SFM anode and Pr 6 O 11 cathode catalysts are loaded into a porous symmetric-architecture cell by infiltration and firing. The most effective chelating agent (citric acid/ethyl glycol) and optimal firing/reducing temperatures (850 °C/750 °C) for the SFM catalyst precursor solution are selected and confirmed by cell testing. Operating temperature, cell voltage, and oxygen concentration at the cathode greatly affect the methane conversion rate and product selectivity by controlling the oxygen ion flow. CH 4 conversion of 85.8% is obtained, with C 2 H 4 , C 2 H 6 , and H 2 concentrations of 10.5%, 12.3%, and 25.6% at 800 °C, respectively, in the product exhaust gas. Reasonable stability of the current density and methane conversion is demonstrated during 200 h operation. Furthermore, this research demonstrates technical progress in catalyst and device development for the E-OCM reaction to synthesize valuable chemicals.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Transient Pulse-Response Time-of-Flight Mass Spectrometry for Complex, Deactivating Heterogeneous Catalytic Systems: Application to Ethane Dehydroaromatization

The study of complex, multistep bond-forming and -breaking reactions in heterogeneous catalytic systems often encounters challenges associated with the involvement of large numbers of intermediates among branching pathways. Kinetic information obtained from traditional steady-state measurements can be complemented with that from time-resolved methods to uncover details of the underlying chemistry. Herein, we describe an approach for tracking the complete time-resolved chemical composition (ca. 4–200 u) of a reactor effluent in response to a reactant pulse. We use a six-port rotary valve with a metered sampling loop to pulse reactants at ambient pressure into a flow reactor packed with a catalyst bed within the isothermal region of a heated furnace. The temporal evolution of effluent species is tracked using time-resolved molecular-beam time-of-flight mass spectrometry. We highlight the possibilities that this method has to offer by studying the complex bifunctional mechanism of ethane dehydroaromatization over an HZSM-5-supported platinum catalyst. We demonstrate that energy-tunable ionization sources, which facilitate isomer resolution, enable the measurement of the full mass spectral time-dependent system response. This includes the evolution of major products and mechanistically relevant reactive intermediates such as 1,3-butadiene and cyclopentadiene; these species have not previously been observed from this reaction. In additional studies, we also assess the role of platinum in the catalyst by examining temporal responses to ethane and ethylene feeds. Results show that two temporally distinct formation pathways exist for methane and benzene, and that their importance depends on both catalyst composition and reactant identity. Additionally, characteristics of catalyst deactivation are uniquely observable in the time-resolved mass spectral response, including the selective deactivation of a benzene formation pathway. The combination of time-of-flight mass spectrometry with tunable ionization enables the simultaneous observation of all effluents in a complex mixture of intermediates with isomer/isobar differentiation capabilities that can be applied to any complex reaction system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Multilevel Analysis of Electrochemically Mediated Methanolysis of Poly(ethylene terephthalate) (PET)

Here, this study presents a multilevel analysis of electrochemically mediated methanolysis as a promising method for reducing the environmental impacts of plastic recycling, with a focus on depolymerizing poly(ethylene terephthalate) (PET) into dimethyl terephthalate (DMT). Instead of conventional chemical PET depolymerization, this electrochemical approach provides distinct technical advantages in process control and efficiency. At the process level, key operational parameters, including applied current and reaction time, were systematically investigated to optimize PET conversion and DMT selectivity. The electrochemical approach was directly compared to equivalent chemical methanolysis systems and demonstrated superior performance in terms of PET conversion and DMT selectivity. Building on these findings, a technoeconomic assessment identified the current economic bottlenecks and revealed that improvements in process design, DMT selectivity, PET conversion, and energy efficiency are key to reducing the overall process cost and enabling future implementation. While further optimization is required for market competitiveness, these results establish a performance baseline for the electrochemically mediated PET methanolysis process and underscore the importance of combining process-level innovation with systems-level evaluation in the development of sustainable recycling technologies.

chemical recycling↗
DOE OSTI2025

Perovskite-driven solar C 2 hydrocarbon synthesis from CO 2

Photoelectrochemistry (PEC) presents a direct pathway to solar fuel synthesis by integrating light absorption and catalysis into compact electrodes. Yet, PEC hydrocarbon production remains elusive due to high catalytic overpotentials and insufficient semiconductor photovoltage. Here we demonstrate ethane and ethylene synthesis by interfacing lead halide perovskite photoabsorbers with suitable copper nanoflower electrocatalysts. The resulting perovskite photocathodes attain a 9.8% Faradaic yield towards C 2 hydrocarbon production at 0 V against the reversible hydrogen electrode. The catalyst and perovskite geometric surface areas strongly influence C 2 photocathode selectivity, which indicates a role of local current density in product distribution. The thermodynamic limitations of water oxidation are overcome by coupling the photocathodes to Si nanowire photoanodes for glycerol oxidation. These unassisted perovskite–silicon PEC devices attain partial C 2 hydrocarbon photocurrent densities of 155 µA cm -2 , 200-fold higher than conventional perovskite–BiVO 4 artificial leaves for water and CO 2 splitting. These insights establish perovskite semiconductors as a versatile platform towards PEC multicarbon synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Branch Length on the Structural and Separation Properties of Hyperbranched Poly(1,3-dioxolane)

Polymers containing poly(ethylene oxide) (PEO) demonstrate superior membrane CO 2 /N 2 separation properties owing to their polar ether oxygen groups exhibiting strong affinity toward CO2. Poly(1,3-dioxolane) (PDXL) shows an ether oxygen content higher than PEO and is expected to have higher CO 2 /N 2 solubility selectivity. However, similar to PEO, the high crystallinity of PDXL greatly reduces its gas permeability. Herein, amorphous PDXL-based hyperbranched polymers were synthesized by ring opening of 1,3-dioxolane (DXL) to form poly(1,3-dioxolane) acrylate (DXLAn) followed by photopolymerization. The repeating unit of DXL (n) or branch length was systematically varied from 4 to 12 to yield amorphous polymers. The chemical and physical properties of the obtained polymers (PDXLAn) were thoroughly evaluated and used to interpret pure- and mixed-gas transport characteristics. The polymers exhibit attractive CO 2 /N 2 and CO 2 /CH 4 separation properties. For example, PDXLA8 exhibits a CO 2 permeability of 220 Barrer and CO 2 /N 2 selectivity of 56 at 35 °C, surpassing Robeson’s 2008 upper bound, and it shows robust separation performance when evaluated with simulated flue gas at 60 °C. This study demonstrates that hyperbranched structures are an effective route to construct amorphous yet highly polar polymers and that chain end groups are instrumental in determining the structural and gas transport characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Peroxide-Selective Reduction of O 2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La–Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93–99% O22-) reduction of dioxygen (O 2 ) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr III 2( O 2 2- )(18C6) 2 (EG)2][OTf]4; 18C6 = 18-crown-6, EG = ethylene glycol, - OTf = - O 3 SCF 3 ; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK a1 (MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal–ligand binding events preceding electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermal Management for a Novel Non-Heavy Rare-Earth Interior Permanent Magnet Machine

The work presents a thermal management solution for a novel non-heavy rare-earth permanent magnet machine being developed at Oak Ridge National Laboratory. The motor has been designed to minimize losses while maximizing performance for a range of speeds and power ratings. The novel motor design reduces rare-earth magnet usage, thereby avoiding supply chain issues. The motor component heat losses are established for operating windows and desired performance. These heat losses, along with windage losses, are being used to develop cooling solutions for different components of this machine. A novel thermal management solution for stators and rotors has been developed, and progress is presented in this paper. The stator cooling is achieved with the help of water-ethylene glycol flowing over the finned aluminum stator jacket, and rotor cooling with automatic transmission fluid passing through novel channels designed in the rotor laminations. The attempt is to establish effective cooling of the stator winding, laminations, and rotor magnets. A 3D conjugate heat transfer model has been developed for overall thermal analysis to establish a down- selected thermal management solution for the machine. The model, in addition to estimated component heat losses, includes windage losses and its impact on rotor and stator cooling. Overall, the work presents a workable thermal solution for the interior permanent magnet machine with potential for further improvements. Future work will involve establishing end winding and refinement of other end parts of the machine with the aim of establishing a robust thermal management solution. The work will also focus on different shapes (e.g., round, non-round, presence of wedges) of rotor-stator gaps and investigate windage losses and their impact on thermal management for higher rotational speeds for the machine.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Cation–polymer interactions and local heterogeneity determine the relative order of alkali cation diffusion coefficients in PEGDA hydrogels

Current research efforts are focused on endowing polymer membranes with ion–ion selectivity by incorporating ion–polymer interactions into materials to bias the selective partitioning and or diffusivity of one species over another. However, little is known about the impact of such interactions on the mechanisms of ion transport. In this study, we probe the influence of cation–polymer interactions on cation, anion, and salt diffusivity in a model membrane material, poly(ethylene glycol) diacrylate (PEGDA) by modeling concentrated polyethylene oxide solutions via molecular dynamics simulations. These results are compared to published experimental data for LiCl, NaCl, and KCl diffusion in PEGDA. Experimentally, the order of salt and cation diffusion coefficients for LiCl, NaCl, and KCl deviate from the order in aqueous solutions. Here, simulations identify these deviations to arise from cation–polymer coordination in the membrane. Both the fraction of bound cations and the average binding lifetime increases with decreasing cation hydration free energy (moving down the alkali series), leading to different diffusivity trends in the membrane compared to solution. However, to recover the experimentally observed order of diffusivities cations and salt in our simulations, we needed to incorporate membrane heterogeneity explicitly via a polymer charge scaling procedure. Together, our results indicate that cation–polymer interactions, as well as spatial heterogeneity within the membrane, play a critical role in dictating the observed order of alkali cation and salt diffusion coefficients in membranes.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Use of GC/MS and Microtome Techniques as Methods to Evaluate ODC Free Cleaner Diffusion and Evaporation in Insulation and Phenolic Case Material

Because of the 1990 Clean Air Act Amendment (CAAA) many chlorinated solvents used in the aerospace industry are being phased out. Replacement of the ODC (ozone-depleting chemicals) with less volatile, non-ozone depleting cleaners has been extensively studied over the past seven years at Thiokol Propulsion, a Division of Cordant Technologies, Inc. The down selection of ODC replacement cleaners has been based on several factors including the diffusion evaporation of the cleaners in selected substrates. Methodologies were developed to evaluate the cleaner content in substrates. Methods of cutting thin slices of material (microtoming) were combined with GC/MS (gas chromatography/mass spectroscopy) analysis. Substrates evaluated in this study include potential solid rocket motor materials: ASNBR (asbestos-filled nitrile butadiene rubber) and CFEPDM (carbon-filled ethylene propylene dimonomer) insulation and glass (GCP), carbon (CCP) and silica (SCP) cloth phenolic substrates with fibers either parallel (0 deg) or perpendicular (90 deg) to the surface. Residue profiles indicate both cleaner and substrate composition affect the diffusion and subsequent evaporation of the cleaner from the substrate surface.

Biegert, L. L.↗
DOE OSTI2025

Selective carboxylation of alkenes with CO 2 to form unsaturated carboxylic acid on Sc-exchanged MFI zeolite

Utilization of CO 2 in chemical synthesis as C1 carbon feedstock to introduce a carboxylic group into alkene is valuable for producing unsaturated carboxylic acids. Selective carboxylation of alkenes at targeted positions can be used to regulate the production of such specific unsaturated carboxylic acids or functionalize hydrocarbon plastics that possess residual C=C double bonds. In this study, we investigated the carboxylation of 1-butene and 2-butene (as representative alkene) with CO 2 on Sc-exchanged MFI zeolites using density functional theory calculations. Here, we find that similar to ethylene, the carboxylation of butene is also rate-limited by the β–H transfer. We examined carboxylation at the C1 and C2 positions of 1-butene and cis and trans isomers for 2-butene. Based on activation barriers of the β–H transfer, our results demonstrate that Sc-MFI zeolite preferably carboxylates at the terminal position of butene. In the case of 2-butene, carboxylation of the trans isomer is more favorable than the cis isomer. Furthermore, We show that the energy of degenerate orbitals of C, O and H atoms (involved in the β–H transfer) in the metallalactone ring regulates the activation energy of the β–H transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Fluorescent indicator dyes for calcium ions

The present invention discloses a new class of highly fluorescent indicator dyes that are specific for calcium ions. The new fluorescent indicator dyes combine a stilbene-type fluorophore with a tetracarboxylate parent Ca.sup.2+ chelating compound having the octacoordinate pattern of liganding groups characteristic of EGTA and BAPTA. Preferred forms contain extra heterocyclic bridges to reinforce the ethylenic bond of the stilbene and to reduce hydrophobicity. Compared to their widely used predecessor, quin2, the new dyes offer up to thirty-fold brighter fluorescence, major changes in wavelength (not just intensity) upon Ca.sup.2+ binding, slightly lower affinities for Ca.sup.2+, slightly longer wavelengths of excitation, and considerably improved selectivity for Ca.sup.2+ over other divalent cations. These properties, particularly the wavelength sensitivity to Ca.sup.2+, make the dyes useful indicators for many intracellular applications, especially in single cells, adherent cell layers, or bulk tissues. The present invention also discloses an improved method for synthesizing alpha-acyloxyalkyl bromides wherein the bromides so synthesized are free of contaminating bis(1-bromoalkyl)ether. The improved method is exemplified herein in the synthesis of acetoxymethyl bromide, a compound useful in preparing the acetoxymethyl esters disclosed herein as novel Ca.sup.2+ specific fluorescent indicators.

Tsien, Roger Y.↗
DOE OSTI2021

Gas transport characteristics of supramolecular networks of metal-coordinated highly branched Poly(ethylene oxide)

Model systems are developed and investigated to better understand the effect of polyether-metal ion interactions on gas separation characteristics. These systems help answer current questions raised by the substantial body of research on metal-organic frameworks (MOFs) dispersed in polyethers to improve gas separation performance, where favorable interactions between the metal centers and polyethers are preferred to improve interfacial compatibility. Specifically, we investigate CO 2 /gas transport properties of supramolecular networks comprising cross-linked poly(ethylene oxide) (XLPEO) and dissociable salts, including LiClO 4 , Ni(BF 4 ) 2 , and Cu(BF 4 ) 2 . Increasing the salt content increases the glass transition temperature (T g ) and generally decreases gas diffusivity and permeability, which can be successfully described using a T g -integrated free volume model with an expression similar to the Vogel-Tammann-Fulcher (VTF) equation. Surprisingly, low loadings of LiClO 4 and Cu(BF 4 ) 2 (2 mass% or less) can increase gas permeability by 30%–70% without affecting the CO 2 /gas selectivity. This increase correlates with polyether-metal ion dynamics as measured by dielectric spectroscopy. Understanding how interaction-mediated dynamics affect gas transport will be instrumental to designing MOF-based mixed matrix materials for gas separations.

36 MATERIALS SCIENCE↗