Search NASA⌕ Search

SEARCH · Search NASA

Results for “full approximation scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

The Jefferson Lab High Power Broadband THz Facility

Jefferson Lab operates a broadband terahertz (THz) facility, whose light is generated by 300 fs FWHM 135 pC bunches of electrons at an energy of 125 MeV as they traverse a magnetic compression chicane prior to entering the optical cavity of the Jefferson Lab Free Electron Laser (FEL)[1-3]. The repetition rate of the electron bunches, and hence that of the light pulses, can be as high as 75 MHz continuous. Approximately 1 microJoule of energy is emitted for each pulse, which implies an average power of up to 75W, a peak power of several MW and electric fields of MV/m. Niche applications of this unique source are pump-probe dynamics, both in and out of equilibrium, and large-scale imaging. The beamline itself is designed to deliver an f/8 beam 2mm vertical × 3mm horizontal in size and 60% vertically polarized from a subtended angle of ~200 milliradians horizontal by ~135 milliradians vertical in the accelerator. The first mirror is copper-braid cooled. The philosophy of the optical design is to use a relay optics configuration to transport the beam via reflection off metal mirrors through a series of focal points, with the final one being at a diamond window. The optical scheme was developed using the Synchrotron Radiation Workshop (SRW)[4]. This code performs a full calculation of the electric field from a relativistic electron. It does not handle multiparticle coherent enhancement[5], but it is significantly different from all the other synchrotron radiation calculations because it retains a term called the Coulomb term in which the electric field falls off as 1/R2. In addition to calculating the electric field and the intensity, the code also allows one to propagate the field through the optical focusing elements and apertures. The beam exiting the final diamond window in the THz user lab passes into a series of vacuum chambers with considerable flexibility for attenuation, collimation, and/or beam splitting for imaging, spectroscopy and 2 photon pump-probe measurements. In this talk we will discuss the details of the philosophy, optical design and operating experience of this facility and also present ideas for discussion. We deeply appreciate the excellent support of our colleagues without which these facilities would not have been built and operated. This work was supported by the U.S. Dept. of Energy under contract DE-AC05-06-OR23177, and the Commonwealth of Virginia. The FEL facility is supported by the Office of Naval Research. 1. S. V. Benson et al, ?The VUV/IR/THz Free Electron Laser Program at Jefferson Lab?, Nucl. Instr. and Meth. A649 9 (2011). 2. G.L. Carr, M.C. Martin, W.R. McKinney, K. Jordan, G.R. Neil and G.P. Williams ?High Power Terahertz Radiation from Relativistic Electrons?, Nature 420 153-156 (2002). 3. J.M. Klopf et al. ?The Jefferson Lab high power THz user facility?, Nucl. Instrum. Methods A582, 114-116 (2007). 4. O. Chubar, P. Elleaume, "Accurate And Efficient Computation Of Synchrotron Radiation In The Near Field Region", proc. of the EPAC98 Conference, 22-26 June 1998, p.1177-1179. 5. C. J. Hirschmugl, M. Sagurton and G. P. Williams, ?Multiparticle coherence calculations for synchrotron radiation emission? Physical Review A44, 1316 (1991).

Klopf, John↗

On the spin separation of algebraic two-component relativistic Hamiltonians

The separation of the spin-free and spin-dependent terms of a given relativistic Hamiltonian is usually facilitated by the Dirac identity. However, this is no longer possible for the recently developed exact two-component relativistic Hamiltonians derived from the matrix representation of the Dirac equation in a kinetically balanced basis. This stems from the fact that the decoupling matrix does not have an explicit form. To resolve this formal difficulty, we first define the spin-dependent term as the difference between a two-component Hamiltonian corresponding to the full Dirac equation and its one-component counterpart corresponding to the spin-free Dirac equation. The series expansion of the spin-dependent term is then developed in two different ways. One is in the spirit of the Douglas-Kroll-Hess (DKH) transformation and the other is based on the perturbative expansion of a two-component Hamiltonian of fixed structure, either the two-step Barysz-Sadlej-Snijders (BSS) or the one-step exact two-component (X2C) form. The algorithms for constructing arbitrary order terms are proposed for both schemes and their convergence patterns are assessed numerically. Truncating the expansions to finite orders leads naturally to a sequence of novel spin-dependent Hamiltonians. In particular, the order-by-order distinctions among the DKH, BSS, and X2C approaches can nicely be revealed. The well-known Pauli, zeroth-order regular approximation, and DKH1 spin-dependent Hamiltonians can also be recovered naturally by appropriately approximating the decoupling and renormalization matrices. On the practical side, the sf-X2C+so-DKH3 Hamiltonian, together with appropriately constructed generally contracted basis sets, is most promising for accounting for relativistic effects in two steps, first spin-free and then spin-dependent, with the latter applied either perturbatively or variationally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved unconstrained energy functional method for eigensolvers in electronic structure calculations

This paper reports on the performance of a preconditioned conjugate gradient based iterative eigensolver using an unconstrained energy functional minimization scheme. In contrast to standard implementations, this scheme avoids an explicit reorthogonalization of the trial eigenvectors and becomes an attractive alternative for the solution of very large problems. The unconstrained formulation is implemented in the first-principles materials and chemistry CP2K code, which performs electronic structure calculations based on a density functional theory approximation to the solution of the many-body Schrödinger equation. We study the convergence of the unconstrained formulation, as well as its parallel scaling, on a Cray XC40 at the National Energy Research Scientific Computing Center (NERSC). The systems we use in our studies are bulk liquid water, a supramolecular catalyst gold(III)-complex, a bilayer of MoS2-WSe2 and a divacancy point defect in silicon, with the number of atoms ranging from 2,247 to 12,288. We show that the unconstrained formulation with an appropriate preconditioner has good convergence properties and scales well to 230k cores, roughly 38% of the full machine.

Del Ben, M↗

Nada: A new code for studying self-gravitating tori around black holes

We present a new two-dimensional numerical code called Nada designed to solve the full Einstein equations coupled to the general relativistic hydrodynamics equations. The code is mainly intended for studies of self-gravitating accretion disks (or tori) around black holes, although it is also suitable for regular spacetimes. Concerning technical aspects the Einstein equations are formulated and solved in the code using a formulation of the standard 3+1 Arnowitt-Deser-Misner canonical formalism system, the so-called Baumgarte-Shapiro Shibata-Nakamura approach. A key feature of the code is that derivative terms in the spacetime evolution equations are computed using a fourth-order centered finite difference approximation in conjunction with the Cartoon method to impose the axisymmetry condition under Cartesian coordinates (the choice in Nada), and the puncture/moving puncture approach to carry out black hole evolutions. Correspondingly, the general relativistic hydrodynamics equations are written in flux-conservative form and solved with high-resolution, shock-capturing schemes. We perform and discuss a number of tests to assess the accuracy and expected convergence of the code, namely, (single) black hole evolutions, shock tubes, and evolutions of both spherical and rotating relativistic stars in equilibrium, the gravitational collapse of a spherical relativistic star leading to the formation of a black hole. In addition, paving the way for specific applications of the code, we also present results from fully general relativistic numerical simulations of a system formed by a black hole surrounded by a self-gravitating torus in equilibrium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adaptive sparse polynomial chaos expansion based on least angle regression

Polynomial chaos (PC) expansions are used in stochastic finite element analysis to represent the random model response by a set of coefficients in a suitable (so-called polynomial chaos) basis. The number of terms to be computed grows dramatically with the size of the input random vector, which makes the computational cost of classical solution schemes (may it be intrusive (i.e. of Galerkin type) or non intrusive) unaffordable when the deterministic finite element model is expensive to evaluate. To address such problems, the paper describes a non intrusive method that builds a sparse PC expansion. First, an original strategy for truncating the PC expansions, based on hyperbolic index sets, is proposed. Then an adaptive algorithm based on least angle regression (LAR) is devised for automatically detecting the significant coefficients of the PC expansion. Beside the sparsity of the basis, the experimental design used at each step of the algorithm is systematically complemented in order to avoid the overfitting phenomenon. The accuracy of the PC metamodel is checked using an estimate inspired by statistical learning theory, namely the corrected leave-one-out error. As a consequence, a rather small number of PC terms are eventually retained (sparse representation), which may be obtained at a reduced computational cost compared to the classical 'full' PC approximation. The convergence of the algorithm is shown on an analytical function. Then the method is illustrated on three stochastic finite element problems. The first model features 10 input random variables, whereas the two others involve an input random field, which is discretized into 38 and 30 - 500 random variables, respectively.

97 MATHEMATICS AND COMPUTING↗

Estimates of Ground Temperature and Atmospheric Moisture from CERES Observations

A method is developed to retrieve surface ground temperature (Tg) and atmospheric moisture using clear sky fluxes (CSF) from CERES-TRMM observations. In general, the clear sky outgoing long-wave radiation (CLR) is sensitive to upper level moisture (q(sub h)) over wet regions and Tg over dry regions The clear sky window flux from 800 to 1200 /cm (RadWn) is sensitive to low level moisture (q(sub j)) and Tg. Combining these two measurements (CLR and RadWn), Tg and q(sub h) can be estimated over land, while q(sub h) and q(sub t) can be estimated over the oceans. The approach capitalizes on the availability of satellite estimates of CLR and RadWn and other auxiliary satellite data. The basic methodology employs off-line forward radiative transfer calculations to generate synthetic CSF data from two different global 4-dimensional data assimilation products. Simple linear regression is used to relate discrepancies in CSF to discrepancies in Tg, q(sub h) and q(sub t). The slopes of the regression lines define sensitivity parameters that can be exploited to help interpret mismatches between satellite observations and model-based estimates of CSF. For illustration, we analyze the discrepancies in the CSF between an early implementation of the Goddard Earth Observing System Data Assimilation System (GEOS-DAS) and a recent operational version of the European Center for Medium-Range Weather Prediction data assimilation system. In particular, our analysis of synthetic total and window region SCF differences (computed from two different assimilated data sets) shows that simple linear regression employing (Delta)Tg and broad layer (Delta)q(sub l) from 500 hPa to surface and (Delta)q(sub h) from 200 to 500 hPa provides a good approximation to the full radiative transfer calculations, typically explaining more than 90% of the 6-hourly variance in the flux differences. These simple regression relations can be inverted to "retrieve" the errors in the geophysical parameters. Uncertainties (normalized by standard deviation) in the monthly mean retrieved parameters range from 7% for (Delta)T to about 20% for (Delta)q(sub t). Our initial application of the methodology employed an early CERES-TRMM data set (CLR and Radwn) to assess the quality of the GEOS2 data. The results showed that over the tropical and subtropical oceans GEOS2 is, in general, too wet in the upper troposphere (mean bias of 0.99 mm) and too dry in the lower troposphere (mean bias of -4.7 mm). We note that these errors, as well as a cold bias in the Tg, have largely been corrected in the current version of GEOS-2 with the introduction of a land surface model, a moist turbulence scheme and the assimilation of SSTM/I total precipitable water.

Wu, Man Li C.↗

Space-Dependent Wielandt Shift Methods for Multigroup Diffusion Eigenvalue Problems

In the calculation of neutronic eigenfunctions and eigenvalues, it is often desirable to approximate the neutron transport equation by a diffusion equation that requires significantly less computational resources to solve. Even when a full transport solution is needed, the solution of the diffusion system can be used to accelerate iterative methods for calculating the transport eigenfunction and eigenvalue. The convergence rate of the basic power iteration method for eigenvalue problems is governed by the dominance ratio; realistic reactor core problems often have high dominance ratios and the power iteration method can converge slowly as a result. A common technique for accelerating the convergence of power iteration is the Wielandt shift (WS) method, which reduces the dominance ratio by 'shifting' the eigenvalue spectrum using an estimate of the desired eigenvalue. WS provides a significant speedup over power iteration if the eigenvalue estimate is close to the true eigenvalue, but it can be difficult to obtain such an estimate. In practice, the shift in the WS method can be dynamically updated in the iteration scheme, in a way that depends on the eigenvalue estimates from the most recent iterations. We present a physically-motivated Space-Dependent Wielandt Shift (SDWS) for solving multigroup diffusion eigenvalue problems. The space-dependence of the eigenvalue shift in SDWS enables a more effective acceleration of the power iteration scheme than WS at the beginning of the iteration scheme, when the current estimate of the eigenvalue is not close to the actual eigenvalue. Several variants of SDWS are discussed here, including an SDWS method that combines the strengths of SDWS (in the early iterations) with those of standard WS (in the later iterations). Numerical results from a 1-D multigroup diffusion problem demonstrate an order of magnitude speedup over power iteration and a 41% speedup over a standard WS technique. This speedup is problem-dependent and appears to be greater for 'more difficult' problems. In this summary, the term 'speedup' refers to a reduction in the number of iterations required to converge to the correct eigenvalue and eigenfunction. Because the scattering is treated fully implicitly (i.e., it is part of the left-hand side of the diffusion system and directly inverted), the computational cost of a single iteration does not vary significantly among the methods discussed in this summary. The number of iterations is therefore representative of the total computational cost for a method. We acknowledge that certain iterative solvers for linear systems (e.g., GMRES) require more computational time to converge when the system is nearly singular (i.e., when a very aggressive Wielandt shift is applied). Nonetheless, when using SDWS in the manner described in this summary, we have seen that the reduction in computational time from reducing the number of power iterations generally outweighs the extra computational time required by iterative solvers such as GMRES. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Galactic abundances as a relic neutrino detection scheme

We propose to use the threshold-free process of neutrino capture on β-decaying nuclei (NCB) with all available candidate nuclei in the Milky Way as target material in order to detect the presence of the Cosmic Neutrino Background (CνB). By integrating over the lifetime of the galaxy one might be able to see the effect of NCB processes as a slightly eschewed abundance ratio of selected β-decaying nuclei. First, the candidates must be chosen so that both the mother and daughter nuclei have a lifetime comparable to that of the Milky Way or the signal could be easily washed out by additional decays. Secondly, relic neutrinos have so low energy that their de Broglie wavelengths are macroscopic and they may therefore scatter coherently on the electronic cloud of the candidate atoms. One must therefore compare the cross sections for the two processes (induced β-decay by neutrino capture, and coherent scattering of the neutrinos on atomic nuclei) before drawing any conclusions. Finally, the density of target nuclei in the galaxy must be calculated. We assume supernovae as the only production source and approximate the neutrino density as a homogenous background. Here we perform the full calculation for {sup 187}Re and {sup 138}La and find that one needs abundance measurements with 24 digit precision in order to detect the effect of relic neutrinos. Or alternatively an enhancement of ρ{sub ν} by a factor of ∼ 10{sup 15} to produce an effect within the current abundance measurement precision.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimates of Ground Temperature and Atmospheric Moisture from CERES Observations

A method is developed to retrieve surface ground temperature (T(sub g)) and atmospheric moisture using clear sky fluxes (CSF) from CERES-TRMM observations. In general, the clear sky outgoing longwave radiation (CLR) is sensitive to upper level moisture (q(sub l)) over wet regions and (T(sub g)) over dry regions The clear sky window flux from 800 to 1200/cm (RadWn) is sensitive to low level moisture (q(sub t)) and T(sub g). Combining these two measurements (CLR and RadWn), Tg and q(sub h) can be estimated over land, while q(sub h) and q(sub l) can be estimated over the oceans. The approach capitalizes on the availability of satellite estimates of CLR and RadWn and other auxiliary satellite data. The basic methodology employs off-line forward radiative transfer calculations to generate synthetic CSF data from two different global 4-dimensional data assimilation products. Simple linear regression is used to relate discrepancies in CSF to discrepancies in T(sub g), q(sub h) and q(sub l). The slopes of the regression lines define sensitivity parameters that can be exploited to help interpret mismatches between satellite observations and model-based estimates of CSF. For illustration, we analyze the discrepancies in the CSF between an early implementation of the Goddard Earth Observing System Data Assimilation System (GEOS-DAS) and a recent operational version of the European Center for Medium-Range Weather Prediction data assimilation system. In particular, our analysis of synthetic total and window region SCF differences (computed from two different assimilated data sets) shows that simple linear regression employing Delta(T(sub g)) and broad layer Delta(q(sub l) from .500 hPa to surface and Delta(q(sub h)) from 200 to .300 hPa provides a good approximation to the full radiative transfer calculations. typically explaining more than 90% of the 6-hourly variance in the flux differences. These simple regression relations can be inverted to "retrieve" the errors in the geophysical parameters. Uncertainties (normalized by standard deviation) in the monthly mean retrieved parameters range from 7% for Delta(T(sub g)) to about 20% for Delta(q(sub l)). Our initial application of the methodology employed an early CERES-TRMM data set (CLR and Radwn) to assess the quality of the GEOS2 data. The results showed that over the tropical and subtropical oceans GEOS2 is, in general, too wet in the upper troposphere (mean bias of 0.99 mm) and too dry in the lower troposphere (mean bias of -4.7 min). We note that these errors, as well as a cold bias in the T(sub g). have largely been corrected in the current version of GEOS-2 with the introduction of a land surface model, a moist turbulence scheme and the assimilation of SSM/I total precipitable water.

Wu, Man Li C.↗

X-ray diffraction and extended X-ray absorption fine structure study of epitaxial mixed ternary bixbyite Pr{sub x}Y{sub 2-x}O{sub 3} (x = 0-2) films on Si (111)

Ternary single crystalline bixbyite Pr{sub x}Y{sub 2-x}O{sub 3} films over the full stoichiometry range (x = 0-2) have been epitaxially grown on Si (111) with tailored electronic and crystallographic structure. In this work, we present a detailed study of their local atomic environment by extended X-ray absorption fine structure at both Y K and Pr L{sub III} edges, in combination with complementary high resolution x-ray diffraction measurements. The local structure exhibits systematic variations as a function of the film composition. The cation coordination in the second and third coordination shells changes with composition and is equal to the average concentration, implying that the Pr{sub x}Y{sub 2-x}O{sub 3} films are indeed fully mixed and have a local bixbyite structure with random atomic-scale ordering. A clear deviation from the virtual crystal approximation for the cation-oxygen bond lengths is detected. This demonstrates that the observed Vegard's law for the lattice variation as a function of composition is based microscopically on a more complex scheme related to local structural distortions which accommodate the different cation-oxygen bond lengths.

36 MATERIALS SCIENCE↗

A moist Boussinesq shallow water equations set for testing atmospheric models

The shallow water equations have long been used as an initial test for numerical methods applied to atmospheric models with the test suite of Williamson et al. being used extensively for validating new schemes and assessing their accuracy. However the lack of physics forcing within this simplified framework often requires numerical techniques to be reworked when applied to fully three dimensional models. In this paper a novel two-dimensional shallow water equations system that retains moist processes is derived. This system is derived from three-dimensional Boussinesq approximation of the hydrostatic Euler equations where, unlike the classical shallow water set, we allow the density to vary slightly with temperature. This results in extra (or buoyancy) terms for the momentum equations, through which a two-way moist-physics dynamics feedback is achieved. The temperature and moisture variables are advected as separate tracers with sources that interact with the mean-flow through a simplified yet realistic bulk moist-thermodynamic phase-change model. This moist shallow water system provides a unique tool to assess the usually complex and highly non-linear dynamics–physics interactions in atmospheric models in a simple yet realistic way. The full non-linear shallow water equations are solved numerically on several case studies and the results suggest quite realistic interaction between the dynamics and physics and in particular the generation of cloud and rain. - Highlights: • Novel shallow water equations which retains moist processes are derived from the three-dimensional hydrostatic Boussinesq equations. • The new shallow water set can be seen as a more general one, where the classical equations are a special case of these equations. • This moist shallow water system naturally allows a feedback mechanism from the moist physics increments to the momentum via buoyancy. • Like full models, temperature and moistures are advected as tracers that interact through a simplified yet realistic phase-change model. • This model is a unique tool to test numerical methods for atmospheric models, and physics–dynamics coupling, in a very realistic and simple way.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multibody dynamics: Modeling component flexibility with fixed, free, loaded, constraint, and residual modes

The assumed-modes method in multibody dynamics allows the elastic deformation of each component in the system to be approximated by a sum of products of spatial and temporal functions commonly known as modes and modal coordinates respectively. The choice of component modes used to model articulating and non-articulating flexible multibody systems is examined. Attention is directed toward three classical Component Mode Synthesis (CMS) methods whereby component normal modes are generated by treating the component interface (I/F) as either fixed, free, or loaded with mass and stiffness contributions from the remaining components. The fixed and free I/F normal modes are augmented by static shape functions termed constraint and residual modes respectively. A mode selection procedure is outlined whereby component modes are selected from the Craig-Bampton (fixed I/F plus constraint), MacNeal-Rubin (free I/F plus residual), or Benfield-Hruda (loaded I/F) mode sets in accordance with a modal ordering scheme derived from balance realization theory. The success of the approach is judged by comparing the actuator-to-sensor frequency response of the reduced order system with that of the full order system over the frequency range of interest. A finite element model of the Galileo spacecraft serves as an example in demonstrating the effectiveness of the proposed mode selection method.

Spanos, John T.↗

Coronal heating by the resonant absorption of Alfven waves: The effect of viscous stress tensor

The time-dependent linearized magnetohydrodynamics (MHD) equations for a fully compressible, low-beta, viscoresistive plasma are solved numerically using an implicit integration scheme. The full viscosity stress tensor (Braginskii 1965) is included with the five parameters eta(sub i) i = 0 to 4. In agreement with previous studies, the numerical simulations demonstrate that the dissipation on inhomogeneities in the background Alfven speed occurs in a narrow resonant layer. For an active region in the solar corona the values of eta(sub i) are eta(sub o) = 0.65 g/cm/s, eta(sub 1) = 3.7 x 10(exp -12) g/cm/s, eta(sub 2) = 4 eta(sub 1), eta(sub 3) = 1.4 x 10(exp -6) g/cm/s, eta(sub 4) = 2 eta(sub 3), with n = 10(exp 10)/cu cm, T = 2 x 10(exp 6) K, and B = 100 G. When the Lundquist number S = 10(exp 4) and R(sub 1) much greater than S (where R(sub 1) is the dimensionless shear viscous number) the width of the resistive dissipation layer d(sub r) is 0.22a (where a is the density gradient length scale) and d(sub r) approximately S(exp -1/3). When S much greater than R(sub 1) the shear viscous dissipation layer width d(sub r) scales as R(sub 1)(exp -1/3). The shear viscous and the resistive dissipation occurs in an overlapping narrow region, and the total heating rate is independent of the value of the dissipation parameters in agreement with previous studies. Consequently, the maximum values of the perpendicular velocity and perpendicular magnetic field scale as R(sub 1)(exp -1/3). It is evident from the simulations that for solar parameters the heating due to the compressive viscosity (R(sub 0) = 560) is negligible compared to the resistive and the shear viscous (R(sub 1)) dissipation and it occurs in a broad layer of order a in width. In the solar corona with S approximately equals 10(exp 4) and R(sub 1) approximately equals 10(exp 14) (as calculated from the Braginskii expressions), the shear viscous resonant heating is of comparable magnitude to the resistive resonant heating.

Ofman, L.↗

NASA SETI microwave observing project: Sky Survey element

The SETI Sky Survey Observing Program is one of two complimentary strategies that NASA plans to use in its microwave Search for Extraterrestrial Intelligence (SETI). The primary objective of the sky survey is to search the entire sky over the frequency range of 1.0 to 10.0 GHz for evidence of narrow band signals of extraterrestrial intelligent origin. Frequency resolutions of 30 Hz or narrower will be used across the entire band. Spectrum analyzers with upwards of ten million channels are required to keep the survey time approximately 6 years. Data rates in excess of 10 megabits per second will be generated in the data taking process. Sophisticated data processing techniques will be required to determine the ever changing receiver baselines, and to detect and archive potential SETI signals. Existing radio telescopes, including several of NASA's Deep Space Network (DSN) 34 meter antennas located at Goldstone, CA and Tidbinbilla, Australia will be used for the observations. The JPL has the primary responsibility to develop and carry out the sky survey. In order to lay the foundation for the full scale SETI Sky Survey, a prototype system is being developed at the JPL. The system will be installed at the new 34-m high efficiency antenna at the Deep Space Station (DSS) 13 research and development station, Goldstone, CA, where it will be used to initiate the observational phase of the NASA SETI Sky Survey. It is anticipated that the early observations will be useful to test signal detection algorithms, scan strategies, and radio frequency interference rejection schemes. The SETI specific elements of the prototype system are: (1) the Wide Band Spectrum Analyzer (WBSA); a 2-million channel fast Fourier transformation (FFT) spectrum analyzer which covers an instantaneous bandpass of 40 MHz; (2) the signal detection processor; and (3) the SETI Sky Survey Manager, a network-based C-language environment that provides observatory control, performs data acquisition and analysis algorithms. A high level description of the prototype hardware and software systems will be given and the current status of the system development will be reported.

Klein, M. J.↗

Hyperspectral Image Classification Using Graph Clustering Methods

Hyperspectral imagery is a challenging modality due to the dimension of the pixels which can range from hundreds to over a thousand frequencies depending on the sensor. Most methods in the literature reduce the dimension of the data using a method such as principal component analysis, however this procedure can lose information. More recently methods have been developed to address classification of large datasets in high dimensions. This paper presents two classes of graph-based classification methods for hyperspectral imagery. Using the full dimensionality of the data, we consider a similarity graph based on pairwise comparisons of pixels. The graph is segmented using a pseudospectral algorithm for graph clustering that requires information about the eigenfunctions of the graph Laplacian but does not require computation of the full graph. We develop a parallel version of the Nyström extension method to randomly sample the graph to construct a low rank approximation of the graph Laplacian. With at most a few hundred eigenfunctions, we can implement the clustering method designed to solve a variational problem for a graph-cut-based semi-supervised or unsupervised classification problem. We implement OpenMP directive-based parallelism in our algorithms and show performance improvement and strong, almost ideal, scaling behavior. The method can handle very large datasets including a video sequence with over a million pixels, and the problem of segmenting a data set into a pre-determined number of classes.

47 OTHER INSTRUMENTATION↗

Formulation and numerical analysis of a fully-coupled dynamically deforming electromagnetic wire

Here, an electromagnetic beam model is developed for the simulation of actuated electronic textiles. The beam is solved using a nonlinear director-based kinematic description with additional temperature and electric potential fields along its length. The three fields are fully coupled by mutual dependences on the deformation, Lorenz force, back electromotive force, temperature dependent constitutive responses, and the Seebeck effect. Instead of solving Maxwell's equations in full detail, a quasistatic approximation is used to solve the electric potential in the presence of a moving material medium. The current-carrying beam approximation is used to further simplify the solution space for the potential. While this formulation alleviates the spatial and temporal discretization restrictions, the coupled problem is an index-1 semi-explicit Differential Algebraic Equation requiring special treatment. The time dependent problem is solved using different Runge-Kutta methods. Diagonally implicit Runge-Kutta methods and explicit Runge-Kutta methods using implicit solution of the electric potential problem are explored. The finite element model is implemented using the open source package FEniCS, which is able to automatically generate the linearizations of the multiphysics equations required for the implicit solutions. A model problem is constructed with which to test and analyze the physical formulation and numerical solution techniques. The time stepping methods are verified using the convergence orders of the higher-order Runge-Kutta methods. Runtime comparisons show that the explicit methods are generally more computationally efficient than the implicit schemes used for this problem. For the implicit schemes, a staggered solution is significantly faster than a monolithic solution at most time step sizes. However, at very large time steps, such as those that would be used for dynamic relaxation, the monolithic solution can be more efficient than the staggered solution.

36 MATERIALS SCIENCE↗

A Monte Carlo study on {sup 223}Ra imaging for unsealed radionuclide therapy

Purpose: Radium-223 ({sup 223}Ra), an α-emitting radionuclide, is used in unsealed radionuclide therapy for metastatic bone tumors. The demand for qualitative {sup 223}Ra imaging is growing to optimize dosimetry. The authors simulated {sup 223}Ra imaging using an in-house Monte Carlo simulation code and investigated the feasibility and utility of {sup 223}Ra imaging. Methods: The Monte Carlo code comprises two modules, HEXAGON and NAI. The HEXAGON code simulates the photon and electron interactions in the tissues and collimator, and the NAI code simulates the response of the NaI detector system. A 3D numeric phantom created using computed tomography images of a chest phantom was installed in the HEXAGON code. {sup 223}Ra accumulated in a part of the spine, and three x-rays and 19 γ rays between 80 and 450 keV were selected as the emitted photons. To evaluate the quality of the {sup 223}Ra imaging, the authors also simulated technetium-99m ({sup 99m}Tc) imaging under the same conditions and compared the results. Results: The sensitivities of the three photopeaks were 147 counts per unit of source activity (cps MBq{sup −1}; photopeak: 84 keV, full width of energy window: 20%), 166 cps MBq{sup −1} (154 keV, 15%), and 158 cps MBq{sup −1} (270 keV, 10%) for a low-energy general-purpose (LEGP) collimator, and those for the medium-energy general-purpose (MEGP) collimator were 33, 13, and 8.0 cps MBq{sup −1}, respectively. In the case of {sup 99m}Tc, the sensitivity was 55 cps MBq{sup −1} (141 keV, 20%) for LEGP and 52 cps MBq{sup −1} for MEGP. The fractions of unscattered photons of the total photons reflecting the image quality were 0.09 (84 keV), 0.03 (154 keV), and 0.02 (270 keV) for the LEGP collimator and 0.41, 0.25, and 0.50 for the MEGP collimator, respectively. Conversely, this fraction was approximately 0.65 for the simulated {sup 99m}Tc imaging. The sensitivity with the LEGP collimator appeared very high. However, almost all of the counts were because of photons that penetrated or were scattered in the collimator; therefore, the proportions of unscattered photons were small. Conclusions: Their simulation study revealed that the most promising scheme for {sup 223}Ra imaging is an 84-keV window using an MEGP collimator. The sensitivity of the photopeaks above 100 keV is too low for {sup 223}Ra imaging. A comparison of the fractions of unscattered photons reveals that the sensitivity and image quality are approximately two-thirds of those for {sup 99m}Tc imaging.

60 APPLIED LIFE SCIENCES↗

Linear Estimation of Particle Bulk Parameters from Multi-Wavelength Lidar Measurements

An algorithm for linear estimation of aerosol bulk properties such as particle volume, effective radius and complex refractive index from multiwavelength lidar measurements is presented. The approach uses the fact that the total aerosol concentration can well be approximated as a linear combination of aerosol characteristics measured by multiwavelength lidar. Therefore, the aerosol concentration can be estimated from lidar measurements without the need to derive the size distribution, which entails more sophisticated procedures. The definition of the coefficients required for the linear estimates is based on an expansion of the particle size distribution in terms of the measurement kernels. Once the coefficients are established, the approach permits fast retrieval of aerosol bulk properties when compared with the full regularization technique. In addition, the straightforward estimation of bulk properties stabilizes the inversion making it more resistant to noise in the optical data. Numerical tests demonstrate that for data sets containing three aerosol backscattering and two extinction coefficients (so called 3 + 2 ) the uncertainties in the retrieval of particle volume and surface area are below 45% when input data random uncertainties are below 20 %. Moreover, using linear estimates allows reliable retrievals even when the number of input data is reduced. To evaluate the approach, the results obtained using this technique are compared with those based on the previously developed full inversion scheme that relies on the regularization procedure. Both techniques were applied to the data measured by multiwavelength lidar at NASA/GSFC. The results obtained with both methods using the same observations are in good agreement. At the same time, the high speed of the retrieval using linear estimates makes the method preferable for generating aerosol information from extended lidar observations. To demonstrate the efficiency of the method, an extended time series of observations acquired in Turkey in May 2010 was processed using the linear estimates technique permitting, for what we believe to be the first time, temporal-height distributions of particle parameters.

linear estimation↗