Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Application of Diagnostic Analysis Tools to the Ares I Thrust Vector Control System

The NASA Ares I Crew Launch Vehicle is being designed to support missions to the International Space Station (ISS), to the Moon, and beyond. The Ares I is undergoing design and development utilizing commercial-off-the-shelf tools and hardware when applicable, along with cutting edge launch technologies and state-of-the-art design and development. In support of the vehicle s design and development, the Ares Functional Fault Analysis group was tasked to develop an Ares Vehicle Diagnostic Model (AVDM) and to demonstrate the capability of that model to support failure-related analyses and design integration. One important component of the AVDM is the Upper Stage (US) Thrust Vector Control (TVC) diagnostic model-a representation of the failure space of the US TVC subsystem. This paper first presents an overview of the AVDM, its development approach, and the software used to implement the model and conduct diagnostic analysis. It then uses the US TVC diagnostic model to illustrate details of the development, implementation, analysis, and verification processes. Finally, the paper describes how the AVDM model can impact both design and ground operations, and how some of these impacts are being realized during discussions of US TVC diagnostic analyses with US TVC designers.

Maul, William A.↗
NASA NTRS1987

Comparing the effectiveness of software testing strategies

This study compares the results of code reading, functional testing, and structural testing in three aspects of software testing: fault detection effectiveness, fault detection cost, and classes of faults detected. Thirty two professional programmers and 42 advanced students applied the three techniques to four unit-sized programs in a fractional experimental design. The major results of this study are the following: (1) With the professional programmers, code reading detected more software faults and had a higher detection rate than did functional or structural testing, while functional testing detected more faults than did structural testing, but functional and structural testing were not different in fault detection rate. (2) In one advanced student subject group, code reading and functional testing were not different in faults found, but were superior to structural testing, while in the other advanced student subject group there was no difference among the techniques. (3) With the advanced student subjects, the three techniques were not different in fault deteciton rate. (4) Number of faults observed, fault detection rate, and total effort in detection depended on the type of software tested. (5) Code reading detected more interface faults than did the other methods. (6) Functional testing detected more control faults than did the other methods. (7) When asked to estimate the percentage of faults detected, code readers gave the most accurate estimates while functional testers gave the least accurate estimates. Appendix B includes the source code for the word.

Basili, Victor R.↗
NASA NTRS1991

Cometary water-group ions in the region surrounding Comet Giacobini-Zinner - Distribution functions and bulk parameter estimates

The bulk parameters (number density and thermal energy density) of cometary water-group ions in the region surrounding Comet Giacobini-Zinner have been derived using data from the EPAS instrument on the ICE spacecraft. The derivation is based on the assumption that the pick-up ion distribution function is isotropic in the frame of the bulk flow, an approximation which has previously been shown to be reasonable within about 400,000 km of the comet nucleus along the spacecraft trajectory. The transition between the pick-up and mass-loaded regions occurs at the cometary shock, which was traversed at a cometocentric distance of about 100,000 km along the spacecraft track. Examination of the ion distribution functions in this region, transformed to the bulk flow frame, indicates the occurrence of a flattened distribution in the vicinity of the local pick-up speed, and a steeply falling tail at speeds above, which may be approximated as an exponential in ion speed.

Staines, K.↗
NASA NTRS1982

Energy dependence in solar cosmic ray composition

An investigation is conducted concerning an occurrence of effects related to energy dependence in studies of solar flare particle composition, taking into account eight large solar-flares associated particle events. The ratios C/O (carbon/oxygen), (MG plus Si)/O, and Fe(group)/O as a function of energy/nucleon are presented in a graph. A wide range of variation in the Fe(group)/O ratios is found from event to event. While the energy dependence is consistent in most events with individual element spectra, several events show unusual behavior in the Fe(group)/O ratio, due to the existence of several distinct spectral components. These multiple spectral components may imply multiple phases of acceleration or substantial interplanetary shock contamination at low energies at times well below the arrival time of these shocks at 1 AU.

Mcguire, R. E.↗
NASA NTRS1988

Population studies in groups and clusters of galaxies. I - The luminosity function of galaxies in the Fornax Cluster

The luminosity functions of galaxies of various Hubble types in the central 2.4-deg-radius core of the Fornax Cluster and the 6-deg-radius core of the Virgo Cluster have been compared. Although properties such as density, velocity dispersion, and X-ray luminosity differ in the two clusters, no significant differences are noted in their luminosity functions or in their morphological mix of galaxies. The ratio of the distances to the Fornax and Virgo clusters has been obtained. Evidence is provided for a radial variation in the luminosity function of dwarf ellipticals in the two clusters.

Ferguson, Henry C.↗
NASA NTRS1980

A scaling theory for linear systems

A theory of scaling for rational (transfer) functions in terms of transformation groups is developed. Two different four-parameter scaling groups which play natural roles in studying linear systems are identified and the effect of scaling on Fisher information and related statistical measures in system identification are studied. The scalings considered include change of time scale, feedback, exponential scaling, magnitude scaling, etc. The scaling action of the groups studied is tied to the geometry of transfer functions in a rather strong way as becomes apparent in the examination of the invariants of scaling. As a result, the scaling process also provides new insight into the parameterization question for rational functions.

Brockett, R. W.↗
NASA NTRS2001

Whole-cell biocomputing

The ability to manipulate systems on the molecular scale naturally leads to speculation about the rational design of molecular-scale machines. Cells might be the ultimate molecular-scale machines and our ability to engineer them is relatively advanced when compared with our ability to control the synthesis and direct the assembly of man-made materials. Indeed, engineered whole cells deployed in biosensors can be considered one of the practical successes of molecular-scale devices. However, these devices explore only a small portion of cellular functionality. Individual cells or self-organized groups of cells perform extremely complex functions that include sensing, communication, navigation, cooperation and even fabrication of synthetic nanoscopic materials. In natural systems, these capabilities are controlled by complex genetic regulatory circuits, which are only partially understood and not readily accessible for use in engineered systems. Here, we focus on efforts to mimic the functionality of man-made information-processing systems within whole cells.

Non-NASA Center↗
NASA NTRS1996

Design of Multi-Parameter Steerable Functions Using Cascade Basis Reduction

A new cascade basis reduction method of computing the optimal least-squares set of basis functions steering a given function is presented. The method combines the Lie group-theoretic and the singular value decomposition approaches in such a way that their respective strengths complement each other. Since the Lie group-theoretic approach is used, the set of basis and steering functions computed can be expressed analytically. Because the singular value decomposition method is used, this set of basis and steering functions is optimal in the least-squares sense. Furthermore, the computational complexity in designing basis functions for transformation groups with large numbers of parameters is significantly reduced. The efficiency of the cascade basis reduction method is demonstrated by designing a set of basis functions that steers a Gabor function under the four-parameter linear transformation group.

Teo, P.↗
NASA NTRS1976

Functional colloidal particles for immunoresearch

The paper deals with the development of a new class of immunological reagents consisting of antibodies covalently bonded to polymeric microspheres to serve as convenient markers for detection of cell surface antigens by scanning electron and light microscopy. Attention is focused on the design and synthesis of spherical particles containing hydroxyl and carboxyl groups on their surface in a wide range of sizes (30-340 nm diam) by emulsion copolymerization, the preparation of spherical particles ranging from 300 nm to 3 microns and containing a variety of functional groups by means of ionizing radiation, and the experimental conditions for the covalent bonding of fluorescent molecules and antibodies to the spheres by means of the cyanogen bromide, carbodiimide and glutaraldehyde methods. These reagents are used to locate antigens on red blood cells, on mouse and human lymphocytes, and on the surface of photoreceptors. They offer a number of advantages and applications for the study of cell surfaces for immunodiagnosis.

Yen, S. P. S.↗
NASA NTRS2006

Transparent and Electrically Conductive Carbon Nanotube-Polymer Nanocomposite Materials for Electrostatic Charge Dissipation

In recent years, nanocomposite materials have been extensively studied because of their superior electrical, magnetic, and optical properties and large number of possible applications that range from nano-electronics, specialty coatings, electromagnetic shielding, and drug delivery. The aim of the present work is to study the electrical and optical properties of carbon nanotube(CNT)-polymer nanocomposite materials for electrostatic charge dissipation. Single and multi-wall carbon nanotubes were grown by catalytic chemical vapor deposition (CCVD) on metal/metal oxide catalytic systems using acetylene or other hydrocarbon feedstocks. After the purification process, in which amorphous carbon and non-carbon impurities were removed, the nanotubes were functionalized with carboxylic acid groups in order to achieve a good dispersion in water and various other solvents. The carbon nanostructures were analyzed, both before and after functionalization by several analytical techniques, including microscopy, Raman spectroscopy, and X-Ray photoelectron spectroscopy. Solvent dispersed nanotubes were mixed (1 to 7 wt %) into acrylic polymers by sonication and allowed to dry into 25 micron thick films. The electrical and optical properties of the films were analyzed as a function of the nanotubes' concentration. A reduction in electrical resistivity, up to six orders of magnitude, was measured as the nanotubes' concentration in the polymeric films increased, while optical transparency remained 85 % or higher relative to acrylic films without nanotubes.

Dervishi, E.↗
NASA NTRS1981

Stability of individual loudness functions obtained by magnitude estimation and production

A correlational analysis of individual magnitude estimation and production exponents at the same frequency is performed, as is an analysis of individual exponents produced in different sessions by the same procedure across frequency (250, 1000, and 3000 Hz). Taken as a whole, the results show that individual exponent differences do not decrease by counterbalancing magnitude estimation with magnitude production and that individual exponent differences remain stable over time despite changes in stimulus frequency. Further results show that although individual magnitude estimation and production exponents do not necessarily obey the .6 power law, it is possible to predict the slope of an equal-sensation function averaged for a group of listeners from individual magnitude estimation and production data. On the assumption that individual listeners with sensorineural hearing also produce stable and reliable magnitude functions, it is also shown that the slope of the loudness-recruitment function measured by magnitude estimation and production can be predicted for individuals with bilateral losses of long duration. Results obtained in normal and pathological ears thus suggest that individual listeners can produce loudness judgements that reveal, although indirectly, the input-output characteristic of the auditory system.

Hellman, R. P.↗
NASA NTRS2008

Intelligent Integrated Health Management for a System of Systems

An intelligent integrated health management system (IIHMS) incorporates major improvements over prior such systems. The particular IIHMS is implemented for any system defined as a hierarchical distributed network of intelligent elements (HDNIE), comprising primarily: (1) an architecture (Figure 1), (2) intelligent elements, (3) a conceptual framework and taxonomy (Figure 2), and (4) and ontology that defines standards and protocols. Some definitions of terms are prerequisite to a further brief description of this innovation: A system-of-systems (SoS) is an engineering system that comprises multiple subsystems (e.g., a system of multiple possibly interacting flow subsystems that include pumps, valves, tanks, ducts, sensors, and the like); 'Intelligent' is used here in the sense of artificial intelligence. An intelligent element may be physical or virtual, it is network enabled, and it is able to manage data, information, and knowledge (DIaK) focused on determining its condition in the context of the entire SoS; As used here, 'health' signifies the functionality and/or structural integrity of an engineering system, subsystem, or process (leading to determination of the health of components); 'Process' can signify either a physical process in the usual sense of the word or an element into which functionally related sensors are grouped; 'Element' can signify a component (e.g., an actuator, a valve), a process, a controller, an actuator, a subsystem, or a system; The term Integrated System Health Management (ISHM) is used to describe a capability that focuses on determining the condition (health) of every element in a complex system (detect anomalies, diagnose causes, prognosis of future anomalies), and provide data, information, and knowledge (DIaK) not just data to control systems for safe and effective operation. A major novel aspect of the present development is the concept of intelligent integration. The purpose of intelligent integration, as defined and implemented in the present IIHMS, is to enable automated analysis of physical phenomena in imitation of human reasoning, including the use of qualitative methods. Intelligent integration is said to occur in a system in which all elements are intelligent and can acquire, maintain, and share knowledge and information. In the HDNIE of the present IIHMS, an SoS is represented as being operationally organized in a hierarchical-distributed format. The elements of the SoS are considered to be intelligent in that they determine their own conditions within an integrated scheme that involves consideration of data, information, knowledge bases, and methods that reside in all elements of the system. The conceptual framework of the HDNIE and the methodologies of implementing it enable the flow of information and knowledge among the elements so as to make possible the determination of the condition of each element. The necessary information and knowledge is made available to each affected element at the desired time, satisfying a need to prevent information overload while providing context-sensitive information at the proper level of detail. Provision of high-quality data is a central goal in designing this or any IIHMS. In pursuit of this goal, functionally related sensors are logically assigned to groups denoted processes. An aggregate of processes is considered to form a system. Alternatively or in addition to what has been said thus far, the HDNIE of this IIHMS can be regarded as consisting of a framework containing object models that encapsulate all elements of the system, their individual and relational knowledge bases, generic methods and procedures based on models of the applicable physics, and communication processes (Figure 2). The framework enables implementation of a paradigm inspired by how expert operators monitor the health of systems with the help of (1) DIaK from various sources, (2) software tools that assist in rapid visualization of the condition of the system, (3) analical software tools that assist in reasoning about the condition, (4) sharing of information via network communication hardware and software, and (5) software tools that aid in making decisions to remedy unacceptable conditions or improve performance.

Smith, Harvey↗
NASA NTRS1977

Observed differences in learning ability of heart rate self-regulation as a function of hypnotic susceptibility

Three groups of eight male and female subjects (aged 20-27 yr) categorized by low and high hypnotic susceptibility were taught to control their heart rates by means of an appropriate autogenic therapy/biofeedback technique. The experimental groups were trained by autogenic therapy and biofeedback, while the control group received only biofeedback. Significant differences are observed in all psychological test scores between subjects of high and low hypnotic susceptibility. The results confirm that (1) there are qualitative and quantitative differences between the performance of individuals with high and low hypnotic susceptibility; (2) interindividual-variability tests yield data relevant to individual performance in visceral learning tasks; (3) the combined autogenic therapy/biofeedback/verbal feedback technique is suitable for conditioning large stable autonomic responses in humans; and (4) this kind of conditioning is effective in eliminating or alleviating physiological reactions to some environmental stressors.

Cowings, P. S.↗
NASA NTRS1994

Some Aspects of the Implementation of Double Group Symmetry and Electron Correlation in Molecular 4-Component Calculations

The efficient implementation of method for electron correlation in molecular 4-component calculations demands that symmetry be exploited where possible. Algorithms for the construction of matrices and the transformation of integrals over symmetry-adapted basis functions, where the point group is restricted to D(sub 2h) and subgroups, will be presented. The merits of keeping the primitive integrals in the scalar basis will be compared with those of transforming them to the 2-spinor basis.

Dyall, Kenneth G.↗
NASA NTRS1991

The role of the Consultative Committee on International Radio (CCIR) in time and frequency

The Consultative Committee on International Radio (CCIR) is a technical advisory group that, within the International Telecommunications Union (ITU), provides formal recommendations, technical advice, and technical information related to the allocation and use of the radio spectrum. The CCIR does its work through a number of separate study groups, each of which deals primarily with one or more radio based services recognized by the ITU. One of these, Study Group 7, is called 'Science Services' and deals with, among other things, time and frequency services, and related topics. This part of CCIR is probably best known for its development and implementation of the UTC time system in 1972. The U.S. National Administration develops proposed recommendations and provides other technical input to the CCIR through an organization of U.S. Study Groups that parallel those functioning internationally. Both the private and government sectors participate actively under the general oversight of the U.S. State Department and its U.S. CCIR National Committee. Current and projected future activities of U.S. and international Study Group 7 are described, including some examples of current recommendations, handbooks, and other documentation that might be useful for working with time and frequency applications.

Roger E. Beehler↗
NASA NTRS1990

Habitual routines in task-performing groups

Groups, like individuals, often develop habitual routines for dealing with frequently encountered stimuli. Although such routines are consequential for group life and work, little is known about them. This paper reconnoiters the territory of habitual behavior in groups that perform work within organizations. We offer a definition of group habits, identify their functions and dysfunctions, suggest how they develop and are maintained, and identify the circumstances when they are likely to be altered or abandoned. Throughout, we give special attention to the social nature of habitual routines in groups, to the interaction between habitual behavior and group life cycle phenomena, and to the role of the organizational context in prompting, shaping, and terminating habitual routines.

NASA Program Space Human Factors↗
NASA NTRS1980

Functional asymmetry of posture and body system regulation

The manifestation of functional asymmetry during the regulation of an athlete's posture and a system of bodies and its effect on the execution of individual and group acrobatic exercises were studied. Functional asymmetry of posture regulation was recorded in acrobats during the execution of individual and group exercises. It was shown that stability is maintained at the expense of bending and twisting motions. It is important to consider whether the functional asymmetry of posture regulation is left or right sided in making up pairs and groups of acrobats.

Boloban, V. N.↗