Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Conceptual Design and Structural Optimization of NASA Environmentally Responsible Aviation (ERA) Hybrid Wing Body Aircraft

Simultaneously achieving the fuel consumption and noise reduction goals set forth by NASA's Environmentally Responsible Aviation (ERA) project requires innovative and unconventional aircraft concepts. In response, advanced hybrid wing body (HWB) aircraft concepts have been proposed and analyzed as a means of meeting these objectives. For the current study, several HWB concepts were analyzed using the Hybrid wing body Conceptual Design and structural optimization (HCDstruct) analysis code. HCDstruct is a medium-fidelity finite element based conceptual design and structural optimization tool developed to fill the critical analysis gap existing between lower order structural sizing approaches and detailed, often finite element based sizing methods for HWB aircraft concepts. Whereas prior versions of the tool used a half-model approach in building the representative finite element model, a full wing-tip-to-wing-tip modeling capability was recently added to HCDstruct, which alleviated the symmetry constraints at the model centerline in place of a free-flying model and allowed for more realistic center body, aft body, and wing loading and trim response. The latest version of HCDstruct was applied to two ERA reference cases, including the Boeing Open Rotor Engine Integration On an HWB (OREIO) concept and the Boeing ERA-0009H1 concept, and results agreed favorably with detailed Boeing design data and related Flight Optimization System (FLOPS) analyses. Following these benchmark cases, HCDstruct was used to size NASA's ERA HWB concepts and to perform a related scaling study.

Quinlan, Jesse R.↗

Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements for Space Flight Hardware and Critical Ground Support Equipment...aka... The NASA EEE Parts Standard, NASA-STD 8739.10

Describes development and content of a new NASA Standard for Electrical Electronic and Electromechanical (EEE) parts. This Standard reflects current practices, instead of changing them. Most NASA Centers utilize local documents, but there is minimal consistency across the Agency. A gap analysis clearly shows the differences that exist among the different centers and with respect to the NASA Parts Policy. Once approved, the new standard can be referenced in contracts and agreements with organizations outside of NASA.

Electronic↗

Conceptual Drivers for an Exploration Medical System

Interplanetary spaceflight, such as NASA's proposed three-year mission to Mars, provides unique and novel challenges when compared with human spaceflight to date. Extended distance and multi-year missions introduce new elements of operational complexity and additional risk. These elements include: inability to resupply medications and consumables, inability to evacuate injured or ill crew, uncharted psychosocial conditions, and communication delays that create a requirement for some level of autonomous medical capability. Because of these unique challenges, the approaches used in prior programs have limited application to a Mars mission. On a Mars mission, resource limitations will significantly constrain available medical capabilities, and require a paradigm shift in the approach to medical system design and risk mitigation for crew health. To respond to this need for a new paradigm, the Exploration Medical Capability (ExMC) Element is assessing each Mars mission phase-transit, surface stay, rendezvous, extravehicular activity, and return-to identify and prioritize medical needs for the journey beyond low Earth orbit (LEO). ExMC is addressing both planned medical operations, and unplanned contingency medical operations that meld clinical needs and research needs into a single system. This assessment is being used to derive a gap analysis and studies to support meaningful medical capabilities trades. These trades, in turn, allow the exploration medical system design to proceed from both a mission centric and ethics-based approach, and to manage the risks associated with the medical limitations inherent in an exploration class mission. This paper outlines the conceptual drivers used to derive medical system and vehicle needs from an integrated vision of how medical care will be provided within this paradigm. Keywords: (Max 6 keywords: exploration, medicine, spaceflight, Mars, research, NASA)

Antonsen, Erik↗

Using FMECA to Support Maintainability and FRACA

Presentation to support a Summit/TIM with various Stakeholders (Ground and Flight) to perform a GAP analysis associated with ground and spacecraft maintenance, maintainability, and availability activities in order to identify missing Agency planning and guidance materials.

Modelling↗

Ground System PRA Data Availability Case Study

Presentation to support a Summit/TIM with various Stakeholders (Ground and Flight) to perform a GAP analysis associated with ground and spacecraft maintenance, maintainability, and availability activities in order to identify missing Agency planning and guidance materials.

Physics of Failure↗

Designing for On-Orbit Servicing Capability

Presentation to support a Summit/TIM with various Stakeholders (Ground and Flight) to perform a GAP analysis associated with ground and spacecraft maintenance, maintainability, and availability activities in order to identify missing Agency planning and guidance materials.

Physics of Failure↗

Operational Availability - Extended Mission Operations

Presentation to support a Summit/TIM with various Stakeholders (Ground and Flight) to perform a GAP analysis associated with ground and spacecraft maintenance, maintainability, and availability activities in order to identify missing Agency planning and guidance materials.

Simulation↗

External Impact Effects on Operational Availability ESMO Experience

Presentation to support a Summit/TIM with various Stakeholders (Ground and Flight) to perform a GAP analysis associated with ground and spacecraft maintenance, maintainability, and availability activities in order to identify missing Agency planning and guidance materials.

Simulation↗

Honeywell Enhancing Airplane State Awareness (EASA) Project: Final Report on Refinement and Evaluation of Candidate Solutions for Airplane System State Awareness

The loss of pilot airplane state awareness (ASA) has been implicated as a factor in several aviation accidents identified by the Commercial Aviation Safety Team (CAST). These accidents were investigated to identify precursors to the loss of ASA and develop technologies to address the loss of ASA. Based on a gap analysis, two technologies were prototyped and assessed with a formative pilot-in-the-loop evaluation in NASA Langley’s full-motion Research Flight Deck. The technologies address: 1) data source anomaly detection in real-time, and 2) intelligent monitoring aids to provide nominal and predictive awareness of situations to be monitored and a mission timeline to visualize events of interest. The evaluation results indicated favorable impressions of both technologies for mitigating the loss of ASA in terms of operational utility, workload, acceptability, complexity, and usability. The team concludes that there is a feasible retrofit solution for improving ASA that would minimize certification risk, integration costs, and training impact.

Whitlow, Stephen D.↗

Gas-Particle Interaction Model Development in Plume Surface Interaction Erosion and Cratering

The development of a predictive simulation capability for extra-terrestrial Plume Surface Interaction (PSI) environments is undertaken by the Fluid Dynamics Branch at NASA/MSFC under the Game Changing Development (GCD) Program funded by NASA’s Space Technology Mission Directorate (STMD). Predictive simulation capability for propulsive Martian and Lunar landing PSI requires accurate modeling of the complex high-speed plume impingement and resulting gas/particle-cloud and ejecta stream formation. Physics modeling gap analysis during formulation of the PSI project scope identified two particular phenomena of first order importance in gas-particle interactions that lacked existing modeling formulations. The first arises from the lack of models capturing the unsteady drag forces imparted on particles by the rapidly expanding supersonic compressible flow. The second addresses the fluctuating forces and dispersions imparted on both the particle and the fluid resulting from the interference and wake turbulence generated by close proximity particle clouds, dubbed the Particle Turbulent Kinetic Energy(PTKE). Their first order significance has been identified in experiments, but simulation models currently do not exist for either effect. The development of models and the eventual implementation into the Eulerian Gas-Granular Flow Solver (GGFS) simulation tools was constructed as one of four major tasks of the PSI project. In this process, data on particle kinetics and gas-particle interactions are collected from carefully designed experiments of particles embedded in jets. The effects observed in the experiments are then replicated in high-fidelity particle-resolved CFD simulations to inform the formulation of improvements to particle phase drag models for implementations in the more efficient Eulerian-Lagrangian CFD simulations. The resulting models are ultimately ported to the Eulerian-Eulerian models applied for most efficient simulations in PSI production application tools. This paper describes the activities and accomplishments of the past year in the gas-particle interaction modeling task of the PSI project.

Jeff West↗

ANSI Energy Efficiency Standarization Coordination Collaborative: Call for Participants

The EESCC invites experts to help develop an energy efficiency standardization "roadmap," consisting of an inventory, gap analysis, and priority areas in need of additional standardization efforts. Public and private representatives will also identify approaches to promote adoption and effective implementation of energy efficiency solutions through voluntary, consensus-based standardization and conformance activities.

EESCC, roadmap, ESVP↗

Thermal Stratification Modeling for Sodium-Cooled Fast Reactors: A Status Update

Thermal hydraulic behavior in the upper plenum of pool- type sodium-cooled fast reactors (SFRs) is a major concern, as many design challenges are concentrated in this region. As SFR designs aim for licensing and commercialization, it is important to accurately analyze and predict the thermal-hydraulic behavior in this region during accident scenarios, specifically thermal stratification. Thermal stratification models are currently a major source of uncertainty in most system codes for all types of power plants. Most system codes, including SAS4A/SASSYS-1, a system level code developed by Argonne National Laboratory (Argonne), use very coarse meshes that cannot capture the complexities of the stratification phenomena. While the commonly employed lumped-volume based models for thermal stratification are able to run in a matter of seconds, they result in approximate results and can only handle simple cases. Other 2-D and 3-D methods, such as computational fluid dynamics (CFD) models, can analyze simple configurations with higher fidelity, but come with a relatively large computational expense. Finding a modeling solution that is both accurate and computationally efficient has proven difficult. This paper provides details of a review and gap analysis of the various modeling approaches proposed to date and explores a path forward for future thermal stratification modeling efforts, with a focus on developing new models for the SAS4A/SASSYS-1 system code.

Morgan, Sarah↗

A REPORT: “HIGH-DENSITY U-MO/AL AND U3SI2/AL DISPERSION FUELS FOR HIGH-POWER RESEARCH REACTORS”

An introduction to a new report on high-density U-Mo/Al and U3Si2/Al dispersion fuels for high power research reactors that ANL is drafting is given in this paper. The main objective of this report is to produce a stand-alone data compilation that can be used by fuel designers, fuel performance analyzers, and fuel safety evaluators, as well as reactor operators. It is also intended to build a foundation for an eventual U-Mo/Al dispersion fuel qualification report that supports the licensing of this fuel for high-power research reactors. U-silicide dispersion fuel is also included in the report for potential applications beyond the ranges of the fuel licensed in NUREG-1313 (Safety Evaluation Report for U3Si2/Al). The contents and framework of the dispersion fuel report is described. A gap analysis provides a summary of the areas where sufficient data and information are not currently available.

Research reactor fuel, U-Si, U-Mo↗

FY 2019 Nuclear Energy Infrastructure Database Accomplishments

The database, known as the Nuclear Energy Infrastructure Database (NEID), is accessed through a web-based application (at nsuf-infrastructure.inl.gov) and built specifically to track research and development (R&D) facilities and associated equipment throughout the DOE-NE complex. The NEID serves internal users (such as DOE personnel and national laboratory staff and researchers) and potential infrastructure users who will be able to view the inventory of DOE-NE-compatible R&D capabilities potentially available to them. NSUF utilizes the NEID to support the annual nuclear energy gap analysis process. Infrastructure needs are gathered from DOE-NE R&D programs and researchers at U.S. national laboratories, universities, and the U.S. nuclear industry. The fiscal year (FY) 2019 Nuclear Energy Infrastructure Database (NEID) Accomplishments report captures all the additions and improvements made to the database in FY 2019.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NRIC Gap Assessment

The National Reactor Innovation Center (NRIC) conducted a Gap Assessment to identify the missing national laboratory capabilities needed to enable demonstration of industry reactor concepts. Input was gathered from the NRIC Demonstration Reactor Capabilities Survey (DRCS), experience with the DE-FOA-0002271 “Advanced Reactor Demonstration” proposal development process, and industry-led Technology Working Group (TWG) letters. Thirty-seven reactor concepts from industry were considered in the Gap Assessment and 20 fundamental problems were identified.

42 ENGINEERING↗

Introducing PRIMRE’s MRE Software Knowledge Hub

This paper focuses on the role of the Marine Renewable Energy (MRE) Software Knowledge Hub on the Portal and Repository for Information on Marine Renewable Energy (PRIMRE). The MRE Software Knowledge Hub provides online services for MRE software users and developers, and seeks to develop assessments and recommendations for improving MRE software in the future. Online software discovery platforms, known as the Code Hub and the Code Catalog, are provided. The Code Hub is a collection of open-source MRE software that includes a landing page with search functionality, linked to files hosted on the MRE Code Hub GitHub organization. The Code Catalog is a searchable online platform for discovery of useful (open-source or commercial) software packages, tools, codes, and other software products. To gather information about the existing MRE software landscape, a software survey is being performed, the preliminary results of which are presented herein. Initially, the data collected in the MRE software survey will be used to populate the MRE Software knowledge hub on PRIMRE, and future work will use data from the survey to perform a gap analysis and develop a vision for future software development. Additionally, as one of PRIMRE’s roles is to support development of MRE software within project partners, a silo of knowledge relating to best practices has been gathered.

marine, energy, open source software, MHKiT, MRE C↗