Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Understanding Rubredoxin Redox Sites by Density Functional Theory Studies of Analogues

Determining the redox energetics of redox site analogues of metalloproteins is essential in unraveling the various contributions to electron transfer properties of these proteins. Since studies of the [4Fe-4S] analogues show that the energies are dependent on the ligand dihedral angles, broken symmetry density functional theory (BS-DFT) with the B3LYP functional and double-ζ basis sets calculations of optimized geometries and electron detachment energies of [1Fe] rubredoxin analogues are compared to crystal structures and gas-phase photoelectron spectroscopy data, respectively, for [Fe(SCH3)4]0/1-/2-, [Fe(S2-o-xyl)2]0/1-/2-, and Na+[Fe(S2-oxyl) 2]1-/2- in different conformations. In particular, the study of Na+[Fe(S2-o-xyl)2]1-/2- is the only direct comparison of calculated and experimental gas phase detachment energies for the 1-/2- couple found in the rubredoxins. These results show that variations in the inner sphere energetics by up to ~0.4 eV can be caused by differences in the ligand dihedral angles in either or both redox states. Moreover, these results indicate that the protein stabilizes the conformation that favors reduction. In addition, the free energies and reorganization energies of oxidation and reduction as well as electrostatic potential charges are calculated, which can be used as estimates in continuum electrostatic calculations of electron transfer properties of [1Fe] proteins.

Environmental Molecular Sciences Laboratory↗

Isomers and conformational barriers of gas phase nicotine, nornicotine and their protonated forms

We report extensive conformational searches of the neutral nicotine, nornicotine and their protonated analogs that are based on ab-initio second order Møller-Plesset perturbation (MP2) electronic structure calculations. Initial searches were performed with the 6-31G(d,p) and the energetics of the most important structures were further refined from geometry optimizations with the aug-cc-pVTZ basis set. Based on the calculated free energies at T=298 K for the gas phase molecules, neutral nicotine has two dominant trans conformers, whereas neutral nornicotine is a mixture of several conformers. For nicotine, the protonation on both the pyridine and the pyrrolidine sites is energetically competitive, whereas nornicotine prefers protonation on the pyridine nitrogen. The protonated form of nicotine is mainly a mixture of two pyridine-protonated trans conformers and two pyrrolidine-protonated trans conformers, whereas the protonated form of nornicotine is a mixture of four pyridine-protonated trans conformers. Nornicotine is conformationally more flexible than nicotine, however it is less protonated at the biologically important pyrrolidine nitrogen site. The lowest energy isomers for each case were found to interconvert via low (< 6 kcal/mol) rotational barriers around the pyridine-pyrrolidine bond.

Yoshida, Tomoki↗

Supramolecular binding and separation of hydrocarbons within a functionalized porous metal–organic framework

Supramolecular interactions are fundamental to host–guest binding in many chemical and biological processes. Direct visualization of such supramolecular interactions within host–guest systems is extremely challenging, but crucial to understanding their function. Within this paper, we report a comprehensive study that combines neutron scattering, synchrotron X-ray and neutron diffraction, and computational modelling to define the detailed binding at a molecular level of acetylene, ethylene and ethane within the porous host NOTT-300. This study reveals simultaneous and cooperative hydrogen-bonding, π···π stacking interactions and intermolecular dipole interactions in the binding of acetylene and ethylene to give up to 12 individual weak supramolecular interactions aligned within the host to form an optimal geometry for the selective binding of hydrocarbons. In addition, we also report the cooperative binding of a mixture of acetylene and ethylene within the porous host, together with the corresponding breakthrough experiments and analysis of adsorption isotherms of gas mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can ferric-oxyl excited states explain elongated iron-oxygen bonds in heme peroxidase catalytic intermediates?

The use of X-ray structures to determine and interpret the ferryl iron-oxygen bond order in molecular oxygen-activating heme enzymes has, in the past, been controversial. This has mainly stemmed from the susceptibility of ferryl species to X-ray-induced electronic state changes. In this work we establishe using time-resolved serial femtosecond X-ray crystallography (tr-SFX) on a dye-decolourising peroxidase that the ferryl intermediate species (Compounds I and II) captured following in situ mixing of microcrystals with H 2 O 2 have single, rather than the double bond character expected. X-ray emission validated tr-SFX data with quantum refinement, time-dependent-DFT calculations and QM/MM geometry optimizations together support the concept that the single iron-oxygen bond character is not an indication of ferryl reduction or a protonated form (Fe IV -OH) but is instead attributed to the existence of accessible excited states possessing ferric-oxyl (Fe III –O •– ) character. Such states offer insight into the nature of ferryl heme.

Williams, Lewis J. [University of Essex, Colcheste↗

Bridging microscopy with molecular dynamics and quantum simulations: an atomAI based pipeline

Recent advances in (scanning) transmission electron microscopy have enabled a routine generation of large volumes of high-veracity structural data on 2D and 3D materials, naturally offering the challenge of using these as starting inputs for atomistic simulations. In this fashion, the theory will address experimentally emerging structures, as opposed to the full range of theoretically possible atomic configurations. However, this challenge is highly nontrivial due to the extreme disparity between intrinsic timescales accessible to modern simulations and microscopy, as well as latencies of microscopy and simulations per se. Addressing this issue requires as a first step bridging the instrumental data flow and physics-based simulation environment, to enable the selection of regions of interest and exploring them using physical simulations. Here we report the development of the machine learning workflow that directly bridges the instrument data stream into Python-based molecular dynamics and density functional theory environments using pre-trained neural networks to convert imaging data to physical descriptors. Additionally, the pathways to ensure structural stability and compensate for the observational biases universally present in the data are identified in the workflow. This approach is used for a graphene system to reconstruct optimized geometry and simulate temperature-dependent dynamics including adsorption of Cr as an ad-atom and graphene healing effects. However, it is universal and can be used for other material systems.

36 MATERIALS SCIENCE↗

Reactants, products, and transition states of elementary chemical reactions based on quantum chemistry

Reaction times, activation energies, branching ratios, yields, and many other quantitative attributes are important for precise organic syntheses and generating detailed reaction mechanisms. Often, it would be useful to be able to classify proposed reactions as fast or slow. However, quantitative chemical reaction data, especially for atom-mapped reactions, are difficult to find in existing databases. Therefore, we used automated potential energy surface exploration to generate 12,000 organic reactions involving H, C, N, and O atoms calculated at the ω B97X-D3/def2-TZVP quantum chemistry level. We report the results of geometry optimizations and frequency calculations for reactants, products, and transition states of all reactions. Additionally, we extracted atom-mapped reaction SMILES, activation energies, and enthalpies of reaction. We believe that this data will accelerate progress in automated methods for organic synthesis and reaction mechanism generation—for example, by enabling the development of novel machine learning models for quantitative reaction prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SOMAS: a platform for data-driven material discovery in redox flow battery development

Abstract Aqueous organic redox flow batteries offer an environmentally benign, tunable, and safe route to large-scale energy storage. The energy density is one of the key performance parameters of organic redox flow batteries, which critically depends on the solubility of the redox-active molecule in water. Prediction of aqueous solubility remains a challenge in chemistry. Recently, machine learning models have been developed for molecular properties prediction in chemistry and material science. The fidelity of a machine learning model critically depends on the diversity, accuracy, and abundancy of the training datasets. We build a comprehensive open access organic molecular database “Solubility of Organic Molecules in Aqueous Solution” (SOMAS) containing about 12,000 molecules that covers wider chemical and solubility regimes suitable for aqueous organic redox flow battery development efforts. In addition to experimental solubility, we also provide eight distinctive quantum descriptors including optimized geometry derived from high-throughput density functional theory calculations along with six molecular descriptors for each molecule. SOMAS builds a critical foundation for future efforts in artificial intelligence-based solubility prediction models.

25 ENERGY STORAGE↗

Two excited-state datasets for quantum chemical UV-vis spectra of organic molecules

Abstract We present two open-source datasets that provide time-dependent density-functional tight-binding (TD-DFTB) electronic excitation spectra of organic molecules. These datasets represent predictions of UV-vis absorption spectra performed on optimized geometries of the molecules in their electronic ground state. The GDB-9-Ex dataset contains a subset of 96,766 organic molecules from the original open-source GDB-9 dataset. The ORNL_AISD-Ex dataset consists of 10,502,904 organic molecules that contain between 5 and 71 non-hydrogen atoms. The data reveals the close correlation between the magnitude of the gaps between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), and the excitation energy of the lowest singlet excited state energies quantitatively. The chemical variability of the large number of molecules was examined with a topological fingerprint estimation based on extended-connectivity fingerprints (ECFPs) followed by uniform manifold approximation and projection (UMAP) for dimension reduction. Both datasets were generated using the DFTB+ software on the “Andes” cluster of the Oak Ridge Leadership Computing Facility (OLCF).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic scale investigation of cation ordering and phase stability in Cs-substituted Ba 1.33 Zn 1.33 Ti 6.67 O 16 , Ba 1.33 Ga 2.66 Ti 5.67 O 16 and Ba 1.33 Al 2.66 Ti 5.33 O 16 hollandite

The titanate-based hollandite structure is proposed as an effective ceramic waste form for Cs-immobilization. In this study, quantum-mechanical calculations were used to quantify the impact of A-site and B-site ordering on the structural stability of hollandite with compositions Ba x Cs y (M z Ti 8-z )O16, where M = Zn 2+ , Ga 3+ , and Al 3+ . The calculated enthalpy of formation agrees with experimental measurements of related hollandite phases from melt solution calorimetry. Ground state geometry optimizations show that, for intermediate compositions (e.g., CsBaGa 6 Ti 18 O 48 ), the presence of both Cs and Ba in the A-site tunnels is not energetically favored. However, the decay heat generated during storage of the Cs-containing waste form may overcome the energetics of Ba and Cs mixing in the tunnel structure of hollandite. The ability of the hollandite structure to accommodate the radioparagenesis of Cs to Ba is critical for long term performance of the waste. For the first time, B-site ordering was observed along the tunnel direction ([001] zone axis) for the Ga-hollandite compositions, as well as the intermediate Al-hollandite composition. These compositionally dependent structural features, and associated formation enthalpies, are of importance to the stability and radiation damage tolerance of ceramic waste forms.

36 MATERIALS SCIENCE↗

Re-examining ammonia addition to the Criegee intermediate: converging to chemical accuracy

Here stabilized Criegee intermediates (SCI) are formed during the ozonolysis of unsaturated hydrocarbons and have been implicated in the formation of hydroxyl radicals and aerosols. Previous theoretical research computed the rate constants for addition of ammonia to simple SCIs, but reported a wide distribution of quantum chemical energies, depending on the basis set used. We report optimized geometries for these reactions at the CCSD(T)/ANO2 and CCSD(T)/ANO1 levels, and CCSD(T)/CBS energies with perturbative quadruples corrections. We find the inclusion of perturbative quadruples corrections elevates the energy of the transition state by 0.76–0.88 kcal mol –1 relative to the reactants, which qualitatively changes the reaction surface. We calculate rate constants and find that Jørgenson and Gross previously overestimated the rate constants for ammonia addition to SCIs, but were within an order of magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EuNi 5 InH 1.5-x (x = 0–1.5): hydrogen induced structural and magnetic transitions

The new quaternary hydride EuNi 5 InH 1.5 has been obtained by hydrogenation of the intermetallic parent EuNi5In under extremely mild conditions, hence, at room temperature and low hydrogen pressure. Hydrogenation at slightly elevated temperatures and pressures allows for the growth of large crystals, which is a rare observation for intermetallic hydrides. EuNi 5 InH 1.5 crystallizes in its own structure type ( hP 17, P6¯m2 , a = 4.9437(6), c = 10.643(1) Å) with a unique arrangement of the intermetallic host. The hydrogen atoms prefer Ni-surrounded positions, occupying {EuNi 3 } and {Eu 2 Ni 2 } tetrahedral voids in the structure. Upon hydrogenation of EuNi 5 In an anisotropic volume expansion accompanied with a decrease of symmetry is observed. Magnetic measurements reveal antiferromagnetic ordering in the hydride below 4 K and indicate an intermediate +II/+III oxidation state for Eu both in the intermetallic phase and the hydride. X-ray photoemission spectroscopy confirms the existence of the two different oxidation states of Eu. The hydrogenation does not affect the oxidation state of Eu and the type of magnetic ordering, but exerts a strong influence on the transition temperature, crystal structure, mechanical and electrical properties. Crystallographic analysis suggests that Eu(II) and Eu(III) do not order but rather mix homogeneously on crystallographic sites. Electronic structure calculations reveal the metallic character of the hydride with several different types of chemical bonding interactions being present in the compound ranging from the formally ionic Eu–H to covalent Ni–H and delocalized metal–metal. As a result, geometry optimization confirm the thermodynamic instability of the intermetallic host lattice for the hydride and supports a transformation into the parental structure as observed experimentally.

36 MATERIALS SCIENCE↗

Photoelectron spectroscopy and computational investigations of the electronic structures and noncovalent interactions of cyclodextrin-closo-dodecaborate anion complexes x-CD·B12X122- (x = a, ß, y; X = H, F)

We report a joint negative ion photoelectron spectroscopy (NIPES) and computational study on the electronic structures and noncovalent interactions of a series of cyclodextrin-closo-dodecaborate dianion complexes, ?-CD·B12X122- (? = a, ß, ?; X = H, F). The measured vertical / adiabatic detachment energies (VDEs / ADEs) are 1.15/0.93, 3.55/3.20, 3.90/3.60, and 3.85/3.60 eV for B12H122- and its a-, ß-, ?-CD complexes, respectively; while the corresponding values are 1.90/1.70, 4.00/3.60, 4.33/3.95, and 4.30/3.85 eV for the X = F case. These results show that the inclusion of B12X122- into the CD cavities greatly increase the electronic stability of the dianions. The effect of electronic stabilization for ß-CD is roughly the same as for ?-CD, both being considerably stronger than that for a-CD. Density functional theory (DFT) based geometry optimization reveals that B12X122- are inserted into CDs increasingly deeper from a-CD to ?-CD. The calculated VDEs and ADEs agree with the experiments well, particularly, reproducing the electron binding energy (EBE) trends. The molecular orbital analyses indicate that the most loosely bound photodetached electrons origin from the guest B12X122- moieties. In addition to a shift of all signals to larger EBE, significant changes in the signal patterns are observed. At low EBE, this is due to the splitting of highly degenerate B12X122- orbitals, while at high EBE, photodetachment from CD oxygens contributes to the new bands. The guest B12X122- and host CD nocovalent, size-specific interaction based on the independent gradient model (IGM) and energy decomposition analysis (EDA), is dominated by electrostatic interactions. The analysis further unravels unambiguiously the existence of dihydrogen bonding and how it affects the total energy that stabilizes the host-guest complexes of CDs·B12H122- compared to the general hydrogen bonding interaction in CDs·B12F122-. This work clearly exhibits strong influences on the electronic structures of dodecaborates upon clustering with CDs, with both size (a-, ß-, ?-) and molecular (X = H or F) specificities, thus providing critical molecular-level information on the cyclodextrin-closo-dodecaborate interactions of interest to medical applications, e.g. Boron neutron capature therapy. The NIPES experiments done at PNNL were supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Bioscience (X.-B.W.) and was performed at the EMSL, a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. H.S. and Z.S. acknowledge the funding support of National Natural Science Foundation of China (Nos.11727810, 61720106009 and 21603074), the Science and Technology Commission of Shanghai Municipality (Nos. 19JC1412200), and the Program of Introducing Talents of Discipline to Universities 111 project (B12024). Z. L. thanks the China Scholarship Council (CSC) for financial support. We acknowledge the ECNU Multifunctional Platform for Innovation (001) and HPC Research Computing Team for providing computational and storage resources. J.W. acknowledges support from the Alexander von Humboldt foundation (Feodor Lynen Fellowship and Rückkehrerstipendium), a Freigeist fellowship of the Volkswagenfoundation and Prof. Vladimir A. Azov for helpful discussions.

Li, Zhipeng↗

Hydrogen bonds and dispersion forces serving as molecular locks for tailored Group 11 bis(amidine) complexes

A flexible polydentate bis(amidine) ligand LH 2 , LH 2 = {CH 2 NH( t Bu)C=N-2-(6-MePy)} 2 , operates as a molecular lock for various coinage metal fragments and forms the dinuclear complexes [LH 2 (MCl) 2 ], M = Cu (1), Au (2), the coordination polymer [{(LH 2 ) 2 (py) 2 (AgCl) 3 }(py) 3 ] n (3), and the dimesityl-digold complex [LH 2 (AuMes) 2 ] (4) by formal insertion of MR fragments (M = Cu, Ag, Au; R = Cl, Mes) into the N–H∙∙∙N hydrogen bonds of LH 2 in yields of 43–95%. Complexes 1, 2, and 4 adopt C 2 -symmetrical structures in the solid state featuring two interconnected 11-membered rings that are locked by two intramolecular N–H∙∙∙R–M hydrogen bonds. QTAIM analyses of the computational geometry-optimized structures 1a, 2a, and 4a reveal 13, 11, and 22 additional bond critical points, respectively, all of which are related to weak intramolecular attractive interactions, predominantly representing dispersion forces, contributing to the conformational stabilization of the C2-symmetrical stereoisomers in the solid state. Variable-temperature 1 H NMR spectroscopy in combination with DFT calculations indicate a dynamic conformational interconversion between two C 2 -symmetrical ground state structures in solution (ΔG ‡ c = 11.1–13.8 kcal mol –1 ), which is accompanied by the formation of an intermediate possessing C i symmetry that retains the hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic improvement of redox potential calculation of Fe(III)/Fe(II) complexes using a three-layer micro-solvation model

Electrochemical transformations of metal ions in aqueous media are challenging to model accurately due to the dynamic solvation structure surrounding ions at different charge states. Predictive modeling at the atomistic scale is essential for understanding these solvation architectures but is often computationally prohibitive. In this contribution, we present a simple, fast, and accurate three-layer micro-solvation model to evaluate the redox potential of metal ions in aqueous solutions. Our model, developed and validated for Fe 3+ /Fe 2+ redox potentials, combines the DFT-based geometry optimizations of the octahedral Fe complex with two layers of explicit water molecules to capture solute–solvent interactions and an implicit solvation model to account for bulk solvent effects. This approach yields accurate predictions for Fe 3+ /Fe 2+ redox potentials in water, achieving errors of 0.02 V with ωB97X-V, 0.01 V with ωB97X-D3, 0.04 V with ωB97M-V, and 0.02 V with B3LYP-D3 functionals. We further demonstrate the generality of our model by applying it to additional metal complexes, including the challenging Fe(CN) 6 3−/4− system, where our model successfully achieves close agreement with experimental values, with an error of 0.07 V and an average error of 0.21 V for all five systems. In summary, the presented simple solvation model has broad applicability and potential for enhancing computational efficiency in redox potential predictions across various chemical and industrial processes of metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An experimental and theoretical study of the S{sub 1}(leftarrow)S{sub 0} transition of p-ethynyltoluene

The one photon and the two photon S{sub 1}(leftarrow)S{sub 0} spectra of jet-cooled p-ethynyltoluene have been measured for the first time, and a detailed vibronic analysis for both spectra has been attained. Mass analyzed resonance enhanced multiphoton ionization spectroscopy is the employed technique. In the one photon spectrum, the allowed component (origin and Franck-Condon bands) is much weaker than the forbidden component, and the same mechanisms as in the one photon spectrum of phenylacetylene are observed. The methyl torsional transitions are active. The 0{sub 0}{sup 0} band is at 35 483 cm{sup -1}. The two photon spectrum is very strong and bears a resemblance to the two photon spectrum of phenylacetylene. The potential barrier of the methyl rotor in the S{sub 1} state has been determined as V{sub 6}=-12 cm{sup -1} with B{sub CH{sub 3}}=5.55 cm{sup -1}. Ab initio calculations, MP2(full)/cc-pVTZ and CAS/cc-pVTZ, have been implemented for the geometry optimization and the normal mode vibration computation in the S{sub 0} and S{sub 1} states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Origin of the Internal Rotational Barrier for Molecules with One Rotatable Dihedral Angle

Continuing our recent endeavor, we systematically investigate in this work the origin of internal rotational barriers for small molecules using the new energy partition scheme proposed recently by one of the authors [S.B. Liu, J. Chem. Phys. 126, 244103 (2007)], where the total electronic energy is decomposed into three independent components, steric, electrostatic and fermionic quantum. In specific, we focus in this work on six carbon, nitrogen, and oxygen containing hydrides, CH¬₃CH₃, CH₃NH₂, CH₃OH, NH₂NH₂, NH₂OH, and H¬₂O₂, with only one rotatable dihedral angle <H-X-Y-H (X,Y=C,N,O). Relative contribution of the different energy components to the total energy difference as a function of the internal dihedral rotation will be considered. Both optimized-geometry (adiabatic) and fixed-geometry (vertical) differences are examined, as are the results from the conventional energy partition and natural bond orbital analysis. A wealth of linear relationships among the total energy difference and energy component differences for different systems have been observed but no universal relationship applicable to all systems studied has been discovered, indicating that even for simple systems as such there exists no omnipresent, unique interpretation on the nature and origin of the internal rotation barrier. Different energy components must be employed for different systems in the rationalization and there are occasions where no single energy component can be invoked to justify the barrier height.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structure of mixed H2O-OH monolayer films on Ru(0001)

Scanning tunneling microscopy (STM) and x-ray absorption spectroscopy (XAS) have been used to study the structures produced by water on Ru(0001) at temperatures above 140 K. It was found that while undissociated water layers are metastable below 140 K, heating above this temperature produces drastic transformations whereby a fraction of the water molecules partially dissociate and form mixed H{sub 2}O-OH structures. XPS and XAS revealed the presence of hydroxyl groups with their O-H bond essentially parallel to the surface. STM images show that the mixed H{sub 2}O-OH structures consist of long narrow stripes aligned with the three crystallographic directions perpendicular to the close-packed atomic rows of the Ru(0001) substrate. The internal structure of the stripes is a honeycomb network of H-bonded water and hydroxyl species. We found that the metastable low temperature molecular phase can also be converted to a mixed H{sub 2}O-OH phase through excitation by the tunneling electrons when their energy is 0.5 eV or higher above the Fermi level. Structural models based on the STM images were used for Density Functional Theory optimizations of the stripe geometry. The optimized geometry was then utilized to calculate STM images for comparison with the experiment.

36 MATERIALS SCIENCE↗

Kinetic and theoretical study of the reaction of Cl atoms with a series of linear thiols

The reactions of Cl with a series of linear thiols: 1-propanethiol (k{sub 1}), 1-butanethiol (k{sub 2}), and 1-pentanethiol (k{sub 3}) were investigated as a function of temperature (in the range of 268-379 K) and pressure (in the range of 50-200 Torr) by laser photolysis-resonance fluorescence. Only 1-propanethiol has previously been studied, but at 1 Torr of total pressure. The derived Arrhenius expressions obtained using our kinetic data were as follows: k{sub 1}=(3.97{+-}0.44)x10{sup -11} exp[(410{+-}36)/T], k{sub 2}=(1.01{+-}0.16)x10{sup -10} exp[(146{+-}23)/T], and k{sub 3}=(1.28{+-}0.10)x10{sup -10} exp[(129{+-}25)/T] (in units of cm{sup 3} molecule{sup -1} s{sup -1}). Moreover, a theoretical insight into mechanisms of these reactions has also been pursued through ab initio Moeller-Plesset second-order perturbation treatment calculations with 6-311G** basis set. Optimized geometries have been obtained for transition states and molecular complexes appearing along the different reaction pathways. Furthermore, molecular energies have been calculated at QCISD(T) level in order to get an estimation of the activation energies. Finally, the nature of the molecular complexes and transitions states is analyzed by using kinetic-potential and natural bond orbital total energy decomposition schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗