Search NASA⌕ Search

SEARCH · Search NASA

Results for “gravity mission data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

A Theoretical and Observational Study of Large and Small-Scale Dynamics in the Mesosphere and Lower Thermosphere in Support of TIMED

The long-term objectives of this IDS component of the TIMED mission are to define, through a combination of modeling and data analysis efforts, the influences of large- and small-scale waves (tidal, planetary, and gravity waves) on the circulation, structure, composition, and variability of the mesosphere and lower thermosphere. Particular emphasis is aimed at the TIMED core science objectives of defining the structure and energetics of the TIMED core region, approx. 60 to 180 km. To do so, however, it is also essential to understand the dynamical influences and contributions because of their considerable direct and indirect influences on structure and energetics. To accomplish these goals, we anticipate two parallel modeling efforts and a significant data analysis effort following TIMED launch. The modeling efforts will address both: the residual circulation response to mean and variable wave forcing of the MLT through development of a spherical model addressing balanced flow dynamics and transience and a more comprehensive effort addressing gravity wave propagation, interactions, nonlinearity, and spectral evolution and transports in canonical and realistic environments. The data analysis effort is envisioned to involve application of ground-based measurements and TIMED data analyses to a quantification of gravity wave forcing and effects at one or more sites with comprehensive measurement suites and extension of the inferred forcing globally, based on distributed ground-based measurements. Research results and publications resulting from the research are included.

Fritts, David C.↗
NASA NTRS2018

The Impact of Stellar Variability on the Detection of Transiting Earth-like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute approx.10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from less than 1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

transit surveys↗
NASA NTRS2018

The Impact of Stellar Variability on the Detection of Transiting Earth-Like Planets

Stellar variability represents a key limitation on the detectability of weak transit signatures of small, Earth-size planets with space-based missions such as NASA's Kepler Mission or ESA's PLATO Mission. The expectations for the performance of the Kepler Mission in the face of solar-like variability were predicated on observations of the Sun with the Variability of Solar Irradiance and Gravity Oscillations (VIRGO) instrument aboard NASA and ESA's joint Solar and Heliospheric Observatory (SOHO) mission, which was launched in December 1995. Analyses of SOHO data indicated that solar-like variability would contribute ~10 ppm to Kepler's noise budget at 6.5 ours, a typical grazing transit timescale. This proved to be optimistic as the typical 12th mag G2V star in the Kepler field of view exhibited 20 ppm of stellar variability-related noise at 6.5 hours, making the detection of true Earth-Sun analogs more difficult. While the consequent increase in the total noise at 6.5 hours from 20 ppm to 30 ppm could have been overcome by extending the mission to a total duration of 7 to 8 years. Unfortunately, a second reaction wheel failed in May 2013, ending the Kepler primary mission. Nevertheless, Kepler proved to be a veritable cornucopia of science results, both for exoplanets and for astrophysics. The phenomenal photometric precision and continuous observations required in order to identify small, rocky transiting planets enables the study of a large range of phenomena contributing to stellar variability for many thousands of solar-like stars in Kepler's field of view in exquisite detail. These effects range from <1 ppm acoustic oscillations on timescales from a few minutes and longward, to flares on timescales of hours, to spot-induced modulation on timescales of days to weeks to activity cycles on timescales of months to years. Kepler discovered over 2600 validated and confirmed exoplanets, and measured the pressure-mode oscillations of over 15000 stars over the course of its mission and the reconstituted K2 mission. We present the adaptive, wavelet-based matched filter used for both the Kepler and the TESS missions, and discuss the connections between this detection algorithm and fundamental detection theory, which allows the detector to function as a noise characterization engine. This provides a dynamical measurement of the photometric noise at transit timescales and thus, a key performance metric for missions like PLATO and Kepler. We give an overview of the stellar variability we see across the full range of spectral types observed by Kepler, from the cool, small red M stars to the hot, large late A stars, both in terms of amplitude as well as timescale.

exoplanets↗
NASA NTRS1993

Venus Interior Structure Mission (VISM): Establishing a Seismic Network on Venus

Magellan radar data show the surface of Venus to contain a wide range of geologic features (large volcanoes, extensive rift valleys, etc.). Although networks of interconnecting zones of deformation are identified, a system of spreading ridges and subduction zones like those that dominate the tectonic style of the Earth do not appear to be present. In addition, the absence of a mantle low-viscosity zone suggests a strong link between mantle dynamics and the surface. As a natural follow-on to the Magellan mission, establishing a network of seismometers on Venus will provide detailed quantitative information on the large scale interior structure of the planet. When analyzed in conjunction with image, gravity, and topography information, these data will aid in constraining mechanisms that drive surface deformation.

Stofan, E. R.↗
NASA NTRS1988

Modeling and estimation of a low degree geopotential model from terrestrial gravity data

The development of appropriate modeling and adjustment procedures for the estimation of harmonic coefficients of the geopotential, from surface gravity data was studied, in order to provide an optimum way of utilizing the terrestrial gravity information in combination solutions currently developed at NASA/Goddard Space Flight Center, for use in the TOPEX/POSEIDON mission. The mathematical modeling was based on the fundamental boundary condition of the linearized Molodensky boundary value problem. Atmospheric and ellipsoidal corrections were applied to the surface anomalies. Terrestrial gravity solutions were found to be in good agreement with the satellite ones over areas which are well surveyed (gravimetrically), such as North America or Australia. However, systematic differences between the terrestrial only models and GEMT1, over extended regions in Africa, the Soviet Union, and China were found. In Africa, gravity anomaly differences on the order of 20 mgals and undulation differences on the order of 15 meters, over regions extending 2000 km in diameter, occur. Comparisons of the GEMT1 implied undulations with 32 well distributed Doppler derived undulations gave an RMS difference of 2.6 m, while corresponding comparison with undulations implied by the terrestrial solution gave RMS difference on the order of 15 m, which implies that the terrestrial data in that region are substantially in error.

Pavlis, Nikolaos K.↗
NASA NTRS1976

Lunar global figure from mare surface elevations

Laser altimetry data from the Apollo 15, 16, and 17 missions show that the ringed maria surfaces lie on one particular reference surface and that the center of gravity is definitely displaced from the optical center. If these extensive surfaces are assumed to be near-hydrostatic surfaces, then there must have existed a time in lunar history when lunar tides, internal processes, or both were much different than they are today.

Sjogren, W. L.↗
NASA NTRS1989

Space Shuttle to deploy Magellan planetary science mission

The objectives of Space Shuttle Mission STS-30 are described along with major flight activities, prelaunch and launch operations, trajectory sequence of events, and landing and post-landing operations. The primary objective of STS-30 is to successfully deploy the Magellan spacecraft into low earth orbit. Following deployment, Magellan will be propelled to its Venus trajectory by an Inertial Upper Stage booster. The objectives of the Magellan mission are to obtain radar images of more than 70 percent of Venus' surface, a near-global topographic map, and near-global gravity field data. Secondary STS-30 payloads include the Fluids Experiment Apparatus (FEA) and the Mesoscale Lightning Experiment (MLE).

Source record↗
NASA NTRS1991

Ulysses - A journey above the sun's poles

The mission objectives and orbit parameters of the NASA/ESA Ulysses project are discussed, and the phenomena to be investigated are reviewed in terms of existing knowledge and mission expectations. The sun, solar corona, and the solar wind are described, and the effects of the solar wind on the heliosphere are discussed. The composition of the interstellar medium is also reviewed because the Ulysses mission involves the analysis of interstellar grains, galactic radiation, and the effects of cosmic rays on the magnetic field. The present status of the trajectory of the Ulysses satellite is that it is currently traveling toward Jupiter for a gravity assist to send it out of the ecliptic plane. The focus of the mission is the investigation of the solar corona which can yield important data regarding the aforementioned phenomena.

Smith, Edward J.↗
NASA NTRSDate not supplied

Evaluation of Aerobic Capacity in Relation to Simulated Lunar Surface Extravehicular Activities

INTRODUCTION Astronauts will need to be physically prepared to successfully execute strenuous Extravehicular Activities (EVA)on the Lunar surface. Compared to Apollo missions, Artemis missions will include EVAs of increased physical demand, frequency, and duration, thus requiring adequate fitness to successfully and safely complete mission objectives and potential contingency scenarios. Currently, aerobic fitness standards for partial gravity (g)surface EVAs are not well supported by high-fidelity EVA analog data. This investigation aims to characterize metabolic demands from Lunar analog EVA simulations in relation to the current NASA standards for celestial partial-g aerobic fitness(aerobic capacity (VO2pk) ≥36.5ml/kg/min). METHODS To evaluate current Lunar EVA aerobic fitness requirements, a pilot study was performed to characterize metabolic ratesduring6 hour simulated EVAs. The EVAs were performed in pressurized MKIII (n=2male) and xEMU (n=3 female) spacesuits offloaded to 1/6 g in the NASA Active Response Gravity Offload System. VO2pk was assessed via graded exercise testing on acycle ergometer and physical workload was quantified as percent ofVO2pk. RESULTS Four out of five subjects did not meet the current NASA celestial surface EVA aerobic standard (3 xEMU, 1MKIII;35.1±0.9 ml/kg/min). During simulated EVAs, subjects (xEMU: 35±1ml/kg/min; MKIII: 44±10ml/kg/min) worked at an average 36%VO2pk(xEMU) and 31% VO2pk(MKIII). For xEMU subjects, the tasks with the greatest average metabolic rates were 2km treadmill traverse(0% grade: 47.2%VO2pk[max 69.1%]), object relocation (45.2%VO2pk[max 60.5%]), and 1.5km traverse (0% grade: 45%VO2pk[max 59.7%]). For MKIII subjects, the tasks with the greatest average metabolic rates were 0.5km treadmill traverse (30% grade: 35.4% VO2pk[max 45.5%]), object relocation(31% VO2pk[max 40.8%]), and treadmill traverse (0% grade: 29.9%VO2pk[max 45.9%]). CONCLUSIONS While average metabolic rates for simulated Lunar EVA fall within sustainable work ranges of30–40% VO2pkand life support system limitations, task-specific metabolic rates exceed this range and may indicate that greater fitness is necessary for more strenuous tasks expected to be performed on the Lunar surface. As few subjects met the standard, more data is needed to adequately evaluate the NASA 3001 standard.

N C Strock↗
NASA NTRS2023

Impacts of SLR Ground Station Geographic Distribution on Time-Variable Gravity Recovery

Satellite laser ranging (SLR) continues to be an essential technique for estimating Earth's low-degree gravity field. The Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (GRACE-FO) do not accurately recover certain coefficients, which are needed for quantifying large-scale mass redistribution as part of Earth's time-variable gravity (TVG) field. In case of an inter-mission gap, as with GRACE and GRACE-FO, SLR can continue to provide mass-change measurements. The current SLR ground network consists of around 40 stations. However, these are not uniformly distributed and the quantity and quality of data varies widely between sites. We anticipate that future stations will improve SLR-derived gravity estimates and we investigate their potential impact on the solution in this simulation study. A single new station that enhances network geometry, particularly in the Southern hemisphere, increases the sensitivity of the network by up to 12% for certain coefficients. The addition of 5 new future stations improves certain coefficients up to 18%. We find new stations are limited in their ability to decorrelate certain coefficients regardless of their location, but that adding more data and increasing network uniformity still benefits the overall solution.

E S Tucker↗
NASA NTRS1984

Spaceborne Gravity Gradiometers

The current status of gravity gradiometers and technology that could be available in the 1990's for the GRAVSAT-B mission are assessed. Problems associated with sensors, testing, spacecraft, and data processing are explored as well as critical steps, schedule, and cost factors in the development plan.

Wells, W. C.↗
NASA NTRS1987

Terrestrial gravity data and comparisons with satellite data

Figures that demonstrate the state of terrestrial gravity coverage, and comparisons between satellite derived gravity field and terrestrial gravity data are presented. It is shown that only a few areas of the world have information accurate enough for geodesy and geophysics. A gravity field mapping space mission is recommended.

Rapp, R. H.↗
NASA NTRS2001

Simulation of the Effect of Realistic Space Vehicle Environments on Binary Metal Alloys

Simulations that assess the effect of space vehicle acceleration environments on the solidification of Pb-Sb alloys are reported. Space microgravity missions are designed to provide a near zero-g acceleration environment for various types of scientific experiments. Realistically. these space missions cannot provide a perfect environment. Vibrations caused by crew activity, on-board experiments, support systems stems (pumps, fans, etc.), periodic orbital maneuvers, and water dumps can all cause perturbations to the microgravity environment. In addition, the drag on the space vehicle is a source of acceleration. Therefore, it is necessary to predict the impact of these vibration-perturbations and the steady-state drag acceleration on the experiments. These predictions can be used to design mission timelines. so that the experiment is run during times that the impact of the acceleration environment is acceptable for the experiment of interest. The simulations reported herein were conducted using a finite element model that includes mass, species, momentum, and energy conservation. This model predicts the existence of "channels" within the processing mushy zone and subsequently "freckles" within the fully processed solid, which are the effects of thermosolutal convection. It is necessary to mitigate thermosolutal convection during space experiments of metal alloys, in order to study and characterize diffusion-controlled transport phenomena (microsegregation) that are normally coupled with macrosegregation. The model allows simulation of steady-state and transient acceleration values ranging from no acceleration (0 g). to microgravity conditions (10(exp -6) to 10(exp -3) g), to terrestrial gravity conditions (1 g). The transient acceleration environments simulated were from the STS-89 SpaceHAB mission and from the STS-94 SpaceLAB mission. with on-orbit accelerometer data during different mission periods used as inputs for the simulation model. Periods of crew exercise, quiet (no crew activity), and nominal conditions from STS-89 were used as simulation inputs as were periods of nominal. overboard water-dump, and free-drift (no orbit maneuvering operations) from STS-94. Steady-state acceleration environments of 0.0 and 10(exp -6) to 10(exp -1) g were also simulated, to serve as a comparison to the transient data and to assess an acceptable magnitude for the steady-state vehicle drag

Westra, Douglas G.↗
NASA NTRS1993

The middeck 0-gravity dynamics experiment

The Middeck 0-Gravity Dynamics Experiment (MODE), flown onboard the Shuttle STS-48 Mission, consists of three major elements: the Experiment Support Module, a dynamics test bed providing computer experiment control, analog signal conditioning, power conditioning, an operator interface consisting of a keypad and display, experiment electrical and thermal control, and archival data storage: the Fluid Test Article assembly, used to investigate the dynamics of fluid-structure interaction in 0-gravity; and the Structural Test Article for investigating the open-loop dynamics of structures in 0-gravity. Deployable, erectable, and rotary modules were assembled to form three one- and two-dimensional structures, in which variations in bracing wire and rotary joint preload could be introduced. Change in linear modal parameters as well as the change in nonlinear nature of the response is examined. Trends in modal parameters are presented as a function of force amplitude, joint preload, and ambient gravity. An experimental study of the lateral slosh behavior of contained fluids is also presented. A comparison of the measured earth and space results identifies and highlights the effects of gravity on the linear and nonlinear slosh behavior of these fluids.

Crawley, Edward F.↗
NASA NTRS1972

Orbiting Frog Otolith experiment (OFO-A): Data reduction and control experimentation

The OFO-A mission was prepared as a part of a special program of vestibular physiology with the purpose of studying in which way the lack of the gravity pull will affect the functioning of that part of the labyrinth which controls balance. The gravitational components corresponded to the different head positions, namely, the gravity sensitive or positioning receptors. It is evident that in weightlessness the gravity sensitive receptors are deprived of their primary input.

Gualtierotti, T.↗
NASA NTRS1989

Local gravity disturbance estimation from multiple-high-single-low satellite-to-satellite tracking

The idea of satellite-to-satellite tracking in the high-low mode has received renewed attention in light of the uncertain future of NASA's proposed low-low mission, Geopotential Research Mission (GRM). The principal disadvantage with a high-low system is the increased time interval required to obtain global coverage since the intersatellite visibility is often obscured by Earth. The U.S. Air Force has begun to investigate high-low satellite-to-satellite tracking between the Global Positioning System (GPS) of satellites (high component) and NASA's Space Transportation System (STS), the shuttle (low component). Because the GPS satellites form, or will form, a constellation enabling continuous three-dimensional tracking of a low-altitude orbiter, there will be no data gaps due to lack of intervisibility. Furthermore, all three components of the gravitation vector are estimable at altitude, a given grid of which gives a stronger estimate of gravity on Earth's surface than a similar grid of line-of-sight gravitation components. The proposed Air Force mission is STAGE (Shuttle-GPS Tracking for Anomalous Gravitation Estimation) and is designed for local gravity field determinations since the shuttle will likely not achieve polar orbits. The motivation for STAGE was the feasibility to obtain reasonable accuracies with absolutely minimal cost. Instead of simulating drag-free orbits, STAGE uses direct measurements of the nongravitational forces obtained by an inertial package onboard the shuttle. The sort of accuracies that would be achievable from STAGE vis-a-vis other satellite tracking missions such as GRM and European Space Agency's POPSAT-GRM are analyzed.

Jekeli, Christopher↗
NASA NTRS1974

Human physiological problems in zero gravity - An attempt at understanding through systems analysis

When the experimental situation is that of man exposed to a gravitationless environment for varying periods of time, the possible importance and value of a related modeling effort is readily apparent. One of the main objectives of the Skylab Program, with its missions of 28, 59, and 85 day duration concerned biomedical investigations of various types, and large amounts of relevant experimental data have been gathered and are in the process of being sorted and interpreted. In order to be of eventual usefulness in forming and testing consistent physiological hypotheses concerning the effect of zero gravity on man, a modeling effort was established in 1972 through the General Electric Company, Space Division, Houston, Texas. An account is given of some of the developments completed or in progress as part of this modeling effort. A long-term cardiovascular model and a large model of the systemic circulation are discussed.

White, R. J.↗
NASA NTRS1983

Mission and trajectory design for a Venus radar mapper mission

Results are presented for a mission and trajectory design for a Venus Radar Mapper mission that will place a SAR in a nearly polar orbit around Venus. The mission is intended to obtain images of at least 70% of the planet's surface at a line-pair resolution of 1 km and to produce global maps of the planet's topography and gravity field. The mission design criteria are discussed, along with the spacecraft flight system, the mission performance and domains, a mission profile, the mapping orbit and SAR coverage, and the data acquisition strategy.

Kwok, J. H.↗