SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We propose a high precision calibration scheme for a Mid-IR Exoplanet Spectrometer. This new technology will enable high-precision transmission, emission, and phase curve spectroscopy for the characterization of exoplanets in and near the habitable zone, enabling the detection of biosignatures in rocky planets around the nearest M dwarfs.
The Starshade Rendezvous Probe Mission (https://smd-prod.s3.amazonaws.com/science-red/s3fs-public/atoms/files/Starshade2.pdf ) [1] will be the first space-based, high-contrast imaging mission with the potential to detect and characterize Earth-like planets in the habitable zone (HZ) around sunlike stars while at the same time exploring entire planetary systems about our nearest neighbors. Over the last two decades, astronomers have discovered and cataloged thousands of planets around other stars. Nevertheless, we have yet to find a planetary system like our own or to characterize discovered small planets to determine if they are similar to Earth. The next step in exploration is to image full planetary systems, including their HZs, and to obtain planetary spectra with enough sensitivity to determine if a planet is Earth-like. A space-based direct imaging mission to ultimately find and characterize other Earth-like planets is a long-term priority for space astrophysics [2, 3].
Transit spectroscopy of terrestrial planets around nearby M dwarfs will be a primary goal of space missions in coming decades. Three-dimensional climate modeling has shown that slow-synchronous rotating terrestrial planets may develop thick clouds at the substellar point, increasing the albedo. For M dwarfs with T(eff)>3000 K, such planets at the inner habitable zone (IHZ) have been shown to retain moist greenhouse conditions, with enhanced stratospheric water vapor ( fH2O>10(exp −3)) and low Earth-like surface temperatures. However, M dwarfs also possess strong UV activity, which may effectively photolyze stratospheric H2O. Prior modeling efforts have not included the impact of high stellar UV activity on the H2O. Here, we employ a 1D photochemical model with varied stellar UV, to assess whether H2O destruction driven by high stellar UV would affect its detectability in transmission spectroscopy. Temperature and water vapor profiles are taken from published 3D climate model simulations for an IHZ Earth-sized planet around a 3300 K M dwarf with an N2–H2O atmosphere; they serve as self-consistent input profiles for the 1D model. We explore additional chemical complexity within the 1D model by introducing other species into the atmosphere. We find that as long as the atmosphere is well-mixed up to 1 mbar, UV activity appears to not impact detectability of H2O in the transmission spectrum. The strongest H2O features occur in the James Webb Space Telescope MIRI instrument wavelength range and are comparable to the estimated systematic noise floor of ∼50 ppm.
Habitable Exoplanet Observatory Mission (HabEx) will image & spectroscopically characterize planetary systems in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by a 150 to 1700 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving the HabEx science goals is a large, ultra-stable telescope. The baseline HabEx telescope is a 4-m off-axis unobscured three-mirror-anastigmatic design with diffraction limited performance at 400 nm and wavefront stability of picometers per mK. These specifications are driven by science requirements. STOP (structural thermal optical performance) analysis predicts that the baseline telescope’s opto-mechanical design meets its specified performance tolerances.
NASA's Kepler Mission launched in 2009 to scan a particular region of the sky for Earth-size planets transiting Sun-like stars in the habitable zone. After nearly ten years of observations, Kepler's mission ended, revealing over 2600 previously unknown exoplanets, most of which are smaller than 2X the size of Earth, and teaching us that small planets are common throughout the galaxy. NASA's TESS Mission launched in 2018 to continue NASA's quest for the search for life and is conducting a near all-sky survey for exoplanets orbiting stars 10X closer and 100X brighter than those observed by Kepler, permitting us to follow up many of the planetary discoveries to determine their masses, densities, and with future missions, to detect and characterize their atmospheres, and ultimately to potentially discover signs of life on these planets.
The Habitable Exoplanet Observatory Mission (HabEx) is one of four missions studied for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone around nearby sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 115 to 1700 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving its science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the baseline optical telescope assembly, including a discussion of how we applied science driven systems engineering to derive the telescope’s engineering specifications from the mission’s science requirements, and presents analysis that the baseline telescope structure meets its specified tolerances.
The solar tide in an ancient Venusian ocean is simulated using a dedicated numerical tidal model. Simulations with varying ocean depth and rotational periods ranging from −243 to 64 sidereal Earth days are used to calculate the tidal dissipation rates and associated tidal torque. The results show that the tidal dissipation could have varied by more than 5 orders of magnitude, from 0.001 to 780 GW, depending on rotational period and ocean depth. The associated tidal torque is about 2 orders of magnitude below the present day Venusian atmospheric torque, and could change the Venusian daylength by up to 72 days per million years depending on rotation rate. Consequently, an ocean tide on ancient Venus could have had significant effects on the rotational history of the planet. These calculations have implications for the rotational periods of similarly close-in exoplanetary worlds and the location of the inner edge of the liquid water habitable zone.
Transit spectroscopy of terrestrial planets around nearby M dwarfs is a primary goal of space missions in coming decades. 3-D climate modeling has shown that slow-synchronous rotating terrestrial planets may develop thick clouds at the substellar point, increasing the albedo. For M dwarfs with T(eff) > 3000 K, such planets at the inner habitable zone (IHZ) have been shown to retain moist greenhouse conditions, with enhanced stratospheric water vapor (fH2O > 10(exp -3)) and low Earth-like surface temperatures. However, M dwarfs also possess strong UV activity, which may effectively photolyze stratospheric H2O. Prior modeling efforts have not included the impact of high stellar UV activity on the H2O. Here, we employ a 1-D photochemical model with varied stellar UV, to assess whether H2O destruction driven by high stellar UV would affect its detectability in transmission spectroscopy. Temperature and water vapor profiles are taken from published 3-D climate model simulations for an IHZ Earth-sized planet around a 3300 K M dwarf with an N2-H2O atmosphere; they serve as self-consistent input profiles for the 1-D model. We explore additional chemical complexity within the 1-D model by introducing other species into the atmosphere. We find that as long as the atmosphere is well-mixed up to 1 mbar, UV activity appears to not impact detectability of H2O in the transmission spectrum. The strongest H2O features occur in the JWST MIRI instrument wavelength range and are comparable to the estimated systematic noise floor of ~50 ppm.
Upcoming telescopes such as the James Webb Space Telescope (JWST), the European Extremely Large Telescope (E-ELT), the Thirty Meter Telescope (TMT) or the Giant Magellan Telescope (GMT) may soon be able to characterize, through transmission, emission or reflection spectroscopy, the atmospheres of rocky exoplanets orbiting nearby M dwarfs. One of the most promising candidates is the late M-dwarf system TRAPPIST-1, which has seven known transiting planets for which transit timing variation (TTV) measurements suggest that they are terrestrial in nature, with a possible enrichment in volatiles. Among these seven planets, TRAPPIST-1e seems to be the most promising candidate to have habitable surface conditions, receiving ∼66 % of the Earth's incident radiation and thus needing only modest greenhouse gas inventories to raise surface temperatures to allow surface liquid water to exist. TRAPPIST-1e is, therefore, one of the prime targets for the JWST atmospheric characterization. In this context, the modeling of its potential atmosphere is an essential step prior to observation. Global climate models (GCMs) offer the most detailed way to simulate planetary atmospheres. However, intrinsic differences exist between GCMs which can lead to different climate prediction and thus observability of gas and/or cloud features in transmission and thermal emission spectra. Such differences should preferably be known prior to observations. In this paper we present a protocol to intercompare planetary GCMs. Four testing cases are considered for TRAPPIST-1e, but the methodology is applicable to other rocky exoplanets in the habitable zone. The four test cases included two land planets composed of modern-Earth and pure-CO2 atmospheres and two aqua planets with the same atmospheric compositions. Currently, there are four participating models (LMDG, ROCKE-3D, ExoCAM, UM); however, this protocol is intended to let other teams participate as well.
Solar contamination, due to moonlight and atmospheric scattering of sunlight, can cause systematic errors in stellar radial velocity (RV) measurements that significantly detract from the ~10 cm/s sensitivity required for the detection and characterization of terrestrial exoplanets in or near habitable zones of Sun-like stars. The addition of low-level spectral contamination at variable effective velocity offsets introduces systematic noise when measuring velocities using classical mask-based or template-based cross-correlation techniques. Here we present simulations estimating the range of RV measurement error induced by uncorrected scattered sunlight contamination. We explore potential correction techniques, using both simultaneous spectrometer sky fibers and broadband imaging via coherent fiber imaging bundles, that could reliably reduce this source of error to below the photon-noise limit of typical stellar observations. We discuss the limitations of these simulations, the underlying assumptions, and mitigation mechanisms. We also present and discuss the components designed and built into the NEID (NN-EXPLORE Exoplanet Investigations with Doppler spectroscopy) precision RV instrument for the WIYN 3.5m telescope, to serve as an ongoing resource for the community to explore and evaluate correction techniques. We emphasize that while “bright time” has been traditionally adequate for RV science, the goal of 10 cm/s precision on the most interesting exoplanetary systems may necessitate access to darker skies for these next generation instruments.
Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm∕s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermomechanically stabilizing the instrument to unprecedented levels. We describe the environment control system (ECS) of the NEID spectrometer, which will be commissioned on the 3.5-m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision <50 cm/s. Because NEID’s optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-Zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below 10(exp −6) Torr and a root mean square (RMS) temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom temperature monitoring and control system.
Understanding the climate of terrestrial planetary atmospheres has been increasingly the focus of research worldwide, in light of the increasing amount of rocky planet discoveries orbiting other stars in or near their habitable zone. Here we present simulations with the new version of the 3D climate model ROCKE-3D, whose version 2.0 will soon become publicly available. A wide range of configurations will be supported, compared to a handful ones in its predecessor, version 1.0 (Way et al., 2017). These include two model resolutions (4x5 and 2x2.5), two radiation schemes (GISS and SOCRATES), three atmospheric configurations (Earth-like, Earth-like without O3 and aerosols, and N2-dominated), and three ocean setups (prescribed sea-surface temperatures and ice cover, q-flux, and dynamic). Simulations of all different configuration combinations have been performed and will become available for use by the community. Key results will be presented across those configurations, together of the role of the structural uncertainty in model setup in the resulting climate calculated by the model.
The Terrestrial Planet Finder (TPF) is envisaged as a series of two space observatories: an 8-m class optical coronagraph, to be launched around 2016; and a mid-infrared formation-flying interferometer, to be launched sometime prior to 2020. The goal of these missions, broadly stated, is to understand the formation and evolution of planets and, ultimately, of life byond our Solar System. In support of this goal, the TPF missions will be capable of (1) searching for and detecting terrestrial planets should they eixst in the habitable zones of nearby stars, (2)characterizing the atmosphere of planets they detect and searching for indicators of the presence of life, (3) undtertaking a program of comparative study of the constituents of planetary systems, and (4) enabling a broad program of general astrophysics. This document details the technology plan for the first of the TPF missions, the Terrestrial Planet Finder Coronagraph (TPF-C).
Starshades, combined with future space telescopes, provide the ability to detect Earth-like exoplanets in the habitable zone by producing high contrast ratios at small inner working angles. The primary function of a starshade is to suppress light from a target star such that its orbiting planets are revealed. In order to do so, the optical edges of the starshade must maintain their precise in-plane profile to produce the necessary apodization function. However, an equally important consideration is the interaction of these edges with light emanating from our own Sun as scattered and/or diffracted sunlight can significantly degrade the achievable contrast. This paper describes the technical efforts performed to obtain precision, low-scatter optical edges for future starshades. Trades between edge radius (i.e. sharpness) and surface reflectivity have been made and small-scale coupons have been produced using scalable manufacturing processes. A custom scattered light testbed has been developed to quantify the magnitude of scattered light over all sun angles. Models have also been developed to make predictions on the level of reflected and/or diffracted light for various edge architectures. The results of these studies have established a current baseline approach which implements photochemical etching techniques on thin metal foils.
The Star-Planet Activity Research CubeSat (SPARCS) is a NASA-funded astrophysics mission, devoted to study the ultraviolet (UV) time-domain behavior in low-mass stars. Given their abundance and size, low-mass stars are important targets in the search for habitable-zone, extrasolar planets. However, not enough is known about the stars flare and quiescent emission, which powers photochemical reactions on the atmospheres of possible planets. Over its 1-year mission, SPARCS will stare at ~10 stars in order to measure short- (minutes) and long- (months) term variability simultaneously in the near-UV (NUV – 280 nm) and far-UV (FUV – 162 nm). SPARCS payload consists of a 9-cm reflector telescope paired with two high-sensitivity 2D-doped CCDs. The detectors are kept passively cooled at 238K, in order to reduce dark-current contribution. The filters have been selected to provide strong rejection of longer wavelengths, where most of the starlight is emitted. The payload will be integrated within a 6U CubeSat to be placed on a Sun-synchronous terminator orbit, which allows for long observing stares for all targets. Launch is expected to occur not earlier than October 2021.
Future space missions such as the Large UV-Optical-Infrared Surveyor (LUVOIR) and the Habitable Exoplanet Observatory (HabEx) require coronagraphs with active wavefront control to suppress starlight to discover and characterize habitable exoplanets. The Extreme Coronagraph for Living Planetary Systems (ECLIPS) is the coronagraph instrument on the LUVOIR Surveyor mission concept, an 8–15m segmented telescope. ECLIPS is split into three channels: UV (200 to 400 nm), optical (400 nm to 850 nm), and NIR (850 nm to 2.0 microns), with each channel equipped with two deformable mirrors for wavefront control, a suite of coronagraph masks, a low-order/out-of-band wavefront sensor, and separate science imagers and spectrographs. The Apodized Pupil Lyot Coronagraph (APLC) and the Vector Vortex Coronagraph (VVC) are the baselined mask technologies for ECLIPS to enable the required 10 -10 contrast for observations in the habitable zones of nearby stars. Their performance depends on active wavefront sensing and control, as well as metrology subsystems to compensate for aberrations induced by segment errors (piston and tip/tilt, among others), secondary mirror misalignment, and global low-order wavefront errors. Here we present the latest results of the simulation of these effects for the two technologies and discuss the achieved contrast for exoplanet detection and characterization after closed-loop wavefront estimation and control algorithms have been applied. Finally, we show simulated observations using high-fidelity spatial and spectral input models of complete planetary systems generated with the Haystacks code framework.
The James Webb Space Telescope (JWST) holds great promise for characterizing atmospheres of transiting exoplanets, potentially providing insights into Earth-sized planets within the habitable zones of M-dwarf host stars if photon-limited performance can be achieved. Here, we discuss the systematic error sources that are expected to be present in grism time-series observations with the NIRCam instrument. We find that pointing jitter and high-gain antenna moves in addition to the detectors' subpixel crosshatch patterns will produce relatively small variations (less than 6 parts per million, ppm). The time-dependent aperture losses due to thermal instabilities in the optics can also be kept to below 2 ppm. To achieve these low noise values, it is important to employ a sufficiently large (more than 1farcs1) extraction aperture. Persistence due to charge-trapping will have a minor (less than 3 ppm) effect on the time series 20 minutes into an exposure and is expected to play a much smaller role than it does for the Hubble Space Telescope WFC3 detectors. We expect detector temperature fluctuations to contribute less than 3 ppm. In total, our estimated noise floor from known systematic error sources is only 9 ppm per visit. We urge caution, however, because unknown systematic error sources could be present in flight and will only be measurable on astrophysical sources such as quiescent stars. We find that reciprocity failure may introduce a perennial instrument offset at the 40 ppm level, so corrections may be needed when a multi-instrument multi-observatory spectrum is stitched together over wide wavelength ranges.
Stellar magnetic field is the driver of activity in stars and cantrigger spots, energetic flares, coronal plasma ejections and ionizedwinds. These phenomena play a crucial role in understanding theinternal mechanisms of the star, but can also have potential effectsin orbiting planets. During the transit of a planet, spots can beocculted producing features imprinted in the transit light curve.Here, we modelled these features to characterize the physicalproperties of the spots (radius, intensity, and location). Inaddition, we monitor spots signatures on multiple transits to estimatemagnetic cycles length of Kepler stars. Flares have also been observedduring transits in active stars. We derive the properties of theflares and analyse their UV impact on possible living organisms inplanets orbiting in the habitable zone.