Search NASA⌕ Search

SEARCH · Search NASA

Results for “impedance spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spatially Resolved Potential and Li-Ion Distributions Reveal Performance-Limiting Regions in Solid-State Batteries

The performance of solid-state electrochemical systems is intimately tied to the potential and lithium distributions across electrolyte–electrode junctions that give rise to interface impedance. Here, we combine two operando methods, Kelvin probe force microscopy (KPFM) and neutron depth profiling (NDP), to identify the rate-limiting interface in operating Si-LiPON-LiCoO 2 solid-state batteries by mapping the contact potential difference (CPD) and the corresponding Li distributions. The contributions from ions, electrons, and interfaces are deconvolved by correlating the CPD profiles with Li-concentration profiles and by comparisons with first-principles-informed modeling. Furthermore, we find that the largest potential drop and variation in the Li concentration occur at the anode–electrolyte interface, with a smaller drop at the cathode–electrolyte interface and a shallow gradient within the bulk electrolyte. Correlating these results with electrochemical impedance spectroscopy following battery cycling at low and high rates confirms a long-standing conjecture linking large potential drops with a rate-limiting interfacial process.

25 ENERGY STORAGE↗
DOE OSTI2026

Aliovalent Anion Incorporation in Halide Na-ion Conductors for Enhanced Ionic Conductivity

Halide-based solid electrolytes (SEs), particularly zirconium (Zr)-centered halides, are attractive from a material cost perspective. Nevertheless, Zr-centered halide SEs are hindered by their low ionic conductivity. Here, in this study, we report on the cubic Na 3 ZrCl 5 S superionic conductor through strategic sulfur anion incorporation, achieving 10 times higher ionic conductivity than that of Na 2 ZrCl 6 . With the optimal composition, the highest ionic conductivity of 0.753 mS cm –1 is obtained for the 0.6Na 2 S–1.4NaCl–ZrCl 4 compound. When paired with a NaCrO 2 cathode, the assembled all-solid-state batteries (ASSBs) achieve a specific discharge capacity of 110 mA h g –1 at 0.1C and exhibit long-term cycling stability at 0.3C at room temperature over 1000 cycles (with 83% capacity retention). Moreover, in situ electrochemical impedance spectroscopy combined with distribution of relaxation times analysis reveal the dynamically interfacial stability between Na halide with electrodes. In conclusion, this work highlights the design and synthesis of advanced halide electrolytes through anion incorporation, paving the way for the development of next-generation ASSBs.

Guo, Xiaolin [Univ. of Louisville, KY (United Stat↗
DOE OSTI2026

Amorphous ZrCl 4 -Based Superionic Conductor as a Cost-Effective Solid Electrolyte for Batteries

Developing highly conductive and cost-effective solid electrolytes is essential for the commercialization of all-solid-state batteries (ASSBs). Zr-based halide electrolytes hold great promise due to their low estimated cost and high oxidation stability. However, the ionic conductivities of most of them are not high enough to enable moderate- and high-rate cycling of ASSBs. Here, fast ion transport is achieved in a group of cost-effective ZrCl 4 -based electrolytes via a design strategy to create highly disordered amorphous structures. Amorphous Li 0.8 ZrCl 4 (SO 4 ) 0.4 , with a low estimated cost of $21 kg –1 , achieves an ionic conductivity of 1.86 mS cm –1 at 25 °C. It also shows a high oxidation limit of 4.5 V vs Li/Li + and good compatibility with high-voltage cathodes, as demonstrated by the stable cycling of ASSBs (73.7% capacity retention after 1000 cycles at 1 C). Synchrotron X-ray diffraction, pair distribution function analysis, and electrochemical impedance spectroscopy reveal that the outstanding conductivity of these amorphous electrolytes is closely related to their short-range and medium-range ordering, revealing new insights for designing high-performance, cost-effective solid electrolytes.

Zhang, Guangxing [Georgia Institute of Technology,↗
DOE OSTI2026

Coupled Interfacial Kinetics and Transport Resistances Govern High-Current Behavior in Bipolar Membranes

Bipolar membranes (BPMs) enable electrochemical systems that operate across large pH gradients; however, high-current operation is often limited by voltage losses whose origins remain difficult to resolve in membrane−electrode assemblies. Here, we combine electrochemical impedance spectroscopy with distribution of relaxation times (EIS–DRT) analysis and operando synchrotron X-ray diffraction to examine interfacial polarization, membrane hydration, and transport in commercial and synthesized BPMs. EIS–DRT isolates the BPM-associated interfacial contribution and shows that the commercial BPM exhibits larger water-dissociation-associated overpotentials than the synthesized BPM. Operando hydration mapping shows that both membranes retain water at the bipolar junction during high-current operation, while anode-adjacent hydration gradients are more pronounced in the commercial membrane. These results indicate that high-current voltage losses are not governed by junction water starvation alone but by coupled interfacial polarization and transport resistances.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Physical and Electrochemical Characterization of Aluminum Electrodes during Electrocoagulation

Electrocoagulation (EC) of synthetic groundwater was conducted using a sacrificial aluminum electrode in a flow-through EC reactor with short retention times (<1 min) under varying hydrodynamic and electrochemical conditions. The treated water was allowed to settle for 24 h and achieved silicate removal of up to 50 ± 4%, and hardness removal of 11 ± 1%. Physical, chemical, and electrochemical characterization was performed to explore changes in electrode surface morphology and composition. Electrochemical impedance spectroscopy (EIS) showed that chemical reactions at the electrode/water interface are sensitive to changes in the immediate chemical environment. We demonstrate that the most energy-intensive step in EC is aluminum dissolution at the anode, which remained fairly constant due to the continuous renewal of the anode’s surface, a result of aluminum dissolution. At the cathode, a structural change in the oxide layer, from γ-Al 2 O 3 to gibbsite, was detected by grazing-incidence X-ray diffraction, which decreased the resistance to charge transfer at the cathode surface, resulting in decreased electrode resistance. The high flow rate in the system minimized the accumulation of aluminum hydroxide solids and aluminum ions at the electrode/water interface, which minimized the formation of thick scalants and amorphous Al(OH) 3 on the cathode and anode, respectively. In conclusion, it was further demonstrated by EIS that under these conditions the resistance to charge transfer was constant throughout the duration of the experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mesoscale Confinement Effects and Emergent Quantum Interference in Titania Antidot Thin Films

The effect of confinement on electron and ion transport in oxide films is of interest both fundamentally and technologically for the design of next-generation electronic devices. In metal oxides with mobile ions and vacancies, it is the interplay of the different modes of charge transport and the corresponding current–voltage signatures that is of interest. We developed a patterned structure in titania films, with feature sizes of 11–20 nm, that allow us to explore confined transport. In this study, we describe how confinement changes the competing charge transport mechanisms, the patterned antidot array leads to displacement fields and confines the charge density that results in modified and emergent electron transport with an increase in conductivity. This emergent behavior can be described by considering electron interference effects. Characterization of the charge transport with electron holography and impedance spectroscopy, and through comparison with modeling, show that nanoscale confinement is a way to control quantum interference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hybrid Molecular Beam Epitaxy for Single-Crystalline Oxide Membranes with Binary Oxide Sacrificial Layers

The advancement in thin-film exfoliation for synthesizing oxide membranes has led to possibilities for creating artificially assembled heterostructures with structurally and chemically incompatible materials. The sacrificial layer method is a promising approach to exfoliate as-grown films from a compatible material system, allowing for their integration with dissimilar materials. Nonetheless, the conventional sacrificial layers often possess an intricate stoichiometry, thereby constraining their practicality and adaptability, particularly when considering techniques such as molecular beam epitaxy (MBE). This is where easy-to-grow binary alkaline-earth-metal oxides with a rock salt crystal structure are useful. These oxides, which include (Mg, Ca, Sr, Ba)O, can be used as a sacrificial layer covering a much broader range of lattice parameters compared to conventional sacrificial layers and are easily dissolvable in deionized water. In this study, we show the epitaxial growth of the single-crystalline perovskite SrTiO 3 (STO) on sacrificial layers consisting of crystalline SrO, BaO, and Ba 1–x Ca x O films, employing a hybrid MBE method. Our results highlight the rapid (≤5 min) dissolution of the sacrificial layer when immersed in deionized water, facilitating the fabrication of millimeter-sized STO membranes. Using high-resolution X-ray diffraction, atomic-force microscopy, scanning transmission electron microscopy, impedance spectroscopy, and scattering-type near-field optical microscopy (SNOM), we demonstrate single-crystalline STO membranes with bulk-like intrinsic dielectric properties. The employment of alkaline earth metal oxides as sacrificial layers is likely to simplify membrane synthesis, particularly with MBE, thus expanding the research and application possibilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Effects of Morphology and Hydration on Anion Transport in Self-Assembled Nanoporous Membranes

Ordered nanoporous polymer membranes offer opportunities for systematically probing the mechanisms of ion transport under confinement and for realizing useful materials for electrochemical devices. Here, we examine the impact of morphology and ion hydration on the transport of hydroxide and bromide anions in nanostructured polymer membranes with 1 nm scale pores. We use aqueous lyotropic self-assembly of an amphiphilic monomer, with a polymerizable surfactant to create direct hexagonal (H I ) and gyroid mesophases. UV-induced cross-linking leads to the formation of nanoporous polymers with water continuous channels. The membranes are mechanically robust and chemically durable, resisting degradation during extended exposure to 1 M NaOH solutions. We use a combination of electrochemical impedance spectroscopy, pulsed-field gradient NMR spectroscopy, and molecular simulations to elucidate anion and water transport. The as-prepared hexagonal systems display higher conductivity and lower activation energies for both anions relative to the gyroid system. When compared at equivalent hydration, however, gyroid and hexagonal membranes show similar activation energies, with nearly identical conductivities at ambient temperatures. Both ionic conductivity and water diffusivity increase with increasing hydration. Here, the water uptake as a function of relative humidity for the hexagonal and gyroid mesophases ultimately dictates the water diffusion and magnitude of the ionic conductivity, with the hexagonal system showing overall higher capacity for hydration and thus faster ion transport. The durability of these materials under aggressive alkaline conditions and their relatively high hydroxide ion conductivity suggest that these nanostructured polymers could be of interest as membranes for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Copper-Based Two-Dimensional Conductive Metal–Organic Framework Thin Films for Ultrasensitive Detection of Perfluoroalkyls in Drinking Water

Perfluoroalkyls (PFAS) continue to emerge as a global health threat making their effective detection and capture extremely important. Though metal–organic frameworks (MOFs) have stood out as a promising class of porous materials for sensing PFAS, detection limits remain insufficient and a fundamental understanding of detection mechanisms warrants further investigation. Here, in this study, we show the use of a 2D conductive MOF film based on copper hexahydroxy triphenylene (Cu-HHTP) to fabricate chemiresistive sensing devices for detecting PFAS in drinking water. We further show ultrasensitive detection using electrochemical impedance spectroscopy. Owing to excellent electrostatic attractions and electrochemical interactions between the copper-based MOF and PFAS, confirmed by high-resolution spectroscopy and theoretical simulations, the MOF-based sensor reported herein exhibits excellent affinity and sensitivity toward perfluorinated acids at concentrations as low as 0.002 ng/L.

2D metal−organic frameworks↗
DOE OSTI2026

Reducing Internal Resistance in Activated Carbon Supercapacitors via Exfoliated Coal-Derived Graphene Additive

Low equivalent series resistance (ESR) is critical for high-rate energy storage devices (e.g., supercapacitors), and graphene is a promising additive for reducing ESR in carbon-based supercapacitor electrodes. However, graphene can be costly and difficult to produce at scale. This study investigates the addition of graphene, produced through electrochemical exfoliation of domestic coal-derived graphite, in activated carbon-based supercapacitors. The coal-derived graphene was incorporated at varying weight loadings and tested in symmetric supercapacitors with aqueous electrolytes. ESR was evaluated using both direct current internal resistance (DCIR) and electrochemical impedance spectroscopy (EIS) measurements. DCIR measurements revealed ESR reductions of ∼34%, ∼18%, and ∼21% at 3, 5, and 10 wt % loadings, respectively, compared to the baseline (0 wt %) of ∼0.54 Ω. These results were further confirmed by EIS measurements. Correspondingly, power density increased by ∼52%, ∼27%, and ∼35% at 3, 5, and 10 wt % loadings relative to the baseline (∼29 kW/kg). Additionally, the electrodes exhibited moderate increases in specific capacitance and energy density, along with stable cycling performance (capacitance retention above 85% after 100,000 cycles) and capacitive behavior (α = 0.95−0.97), suggesting favorable charge transfer kinetics. These findings highlight the potential of exfoliated coal-derived graphene as an effective additive for supercapacitor electrodes.

capacitors↗
DOE OSTI2023

Species-Selective Detection of Volatile Organic Compounds by Ionic Liquid-Based Electrolyte Using Electrochemical Methods

The detection of volatile organic compounds (VOCs) is an important topic for environmental safety and public health. However, the current commercial VOC detectors suffer from cross-sensitivity and low reproducibility. In this work, we present species-selective detection for VOCs using an electrochemical cell based on ionic liquid (IL) electrolytes with features of high selectivity and reliability. The voltammograms measured with the IL-based electrolyte absorbing different VOCs exhibited species-selective features that were extracted and classified by linear discriminant analysis (LDA). The detection system could identify as many as four types of VOCs, including methanol, ethanol, acetone, formaldehyde, and additional water. A mixture of methanol and formaldehyde was detected as well. The sample required for the VOCs classification system was 50 μL, or 1.164 mmol, on average. The response time for each VOC measurement is as fast as 24 s. The volume of VOCs such as formaldehyde in solution could also be quantified by LDA and electrochemical impedance spectroscopy techniques, respectively. The system showed a tunable detection range for 1.6 and 16% (w/v) CH 2 O solution by adjusting the composition of the electrolyte. The limit of detection was as low as 1 μL. For the 1.6% CH 2 O solution, the linearity calibration range was determined to be from 5.30 to 53.00 μmol with a limit of detection at 0.53 μmol. The mechanisms for VOCs determination and quantification are also thoroughly discussed. Finally, it is expected that this work could provide a new insight into the concept of electrochemical detection of VOCs with machine learning analysis and be applied to both VOCs gas monitoring and fluid detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Triacetic Acid Lactone and 4-Hydroxycoumarin as Bioprivileged Molecules for the Development of Performance-Advantaged Organic Corrosion Inhibitors

Biomass conversion, especially the development of bioprivileged molecules utilizing integration of biological and chemical processes, has shown potential to produce novel chemicals with enhanced properties. Here, organic corrosion inhibitors based on triacetic acid lactone and 4-hydroxycoumarin have been synthesized in good yield and tested for corrosion inhibition on mild steel in both sulfuric acid and hydrochloric acid. Sixteen novel corrosion inhibitors derived from triacetic acid lactone and 4-hydroxycoumarin were efficiently synthesized and twelve of them showed high corrosion inhibition efficiency as confirmed by electrochemical impedance spectroscopy (giving values greater than 78%) and polarization analysis. While triacetic acid lactone-based compounds showed good corrosion inhibition performance, the 4-hydroxycoumarin-based compounds showed further improvement in corrosion inhibition performance. Scanning electron microscopy (SEM) analysis of the mild steel coupon in the presence of selected inhibitors showed that corrosion was significantly diminished, with complementary X-ray photoelectron spectroscopy (XPS) analysis suggesting the inhibitor molecules strongly adsorbed on the steel surface. Quantum chemical calculations showed poor correlation between calculated parameters and the performance of these molecules. This large set of corrosion inhibitors containing a dozen promising corrosion inhibitors is useful for future rational design of corrosion inhibitors. In conclusion, the results demonstrate a new direction for the development of bioprivileged molecules.

09 BIOMASS FUELS↗
DOE OSTI2022

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO 2 dielectric (70 nm), on which was placed the active layer of 2–4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol –1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBE CO of 20 ± 1 kJ mol –1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBE CO of 14 ± 1 kJ mol –1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Inorganic carbon compounds↗
DOE OSTI2025

Revealing Solvent-Assisted Li+ Transport in the Solid Electrolyte Interphase operando

The performance of energy-dense lithium metal batteries is critically influenced by the properties of the solid electrolyte interphase (SEI). Yet, progress in understanding this layer has been limited by the lack of accurate operando characterization because the SEI evolves dynamically during cycling. Here, we apply dynamic electrochemical impedance spectroscopy (dEIS) to resolve the real-time evolution of the SEI on lithium metal in ether-based electrolytes with varying degrees of fluorination. We find that faster stabilization of the compact SEI resistance correlates with improved passivation and higher Coulombic efficiency. Unexpectedly, compact SEI resistance correlates directly with Li+ solvation energy, revealing that weaker Li+ solvation increases not only bulk but also interphase resistance. These findings challenge the conventional view of the SEI as a purely solid-phase conductor and instead support a solvent-assisted Li+ transport mechanism within the compact SEI. This framework emphasizes the need to balance SEI ionic conductivity with the Li+ solvation environment to maximize lithium metal battery performance.

Sacci, Robert [ORNL] (ORCID:0000000200735221)↗
DOE OSTI2025

Interfacial Cation Arrangement Controls Electrocatalytic Kinetics in CO 2 Reduction

The identity of electrolyte cations is known to strongly influence electrocatalytic activity, but the relationship between their interfacial arrangement and observed performance remains poorly understood. Organic cations, with their molecular tunability, provide a powerful platform for systematically probing these effects. Here, we leverage phosphonium-based geminal dications to control interfacial cation arrangement and identify the variables that most strongly influence catalytic rates. As a case study, we examine CO 2 reduction to CO over polycrystalline silver electrodes in dry aprotic acetonitrile. Through a combination of rotating disk electrode measurements, electrochemical impedance spectroscopy, and molecular dynamics simulations, we decouple the effects of cation–electrode distance and interfacial cation density on catalytic rates. We find that smaller, more densely packed cations induce stronger interfacial electric fields, which lower the activation barrier for CO 2 adsorption and increase reaction rates. Using geminal phosphonium dications [C n (P mmm ) 2 ][ClO 4 ] 2 , we demonstrate that both the vertical and lateral positioning of organic cations within the electrical double layer independently affect reactivity. These results demonstrate that electrolyte cation identity primarily influences catalytic kinetics by determining how efficiently charge can be arranged at electrochemical interfaces. Altogether, our findings support an electrostatic view of cation effects in catalysis and provide design principles for next-generation electrolytes.

Cations↗
DOE OSTI2020

Laboratory Electrical Conductivity of Marine Gas Hydrate

Methane hydrate was synthesized from pure water ice and flash frozen seawater, with varying amounts of sand or silt added. Electrical conductivity was determined by impedance spectroscopy, using equivalent circuit modeling to separate the effects of electrodes and to gain insight into conduction mechanisms. Silt and sand increase the conductivity of pure hydrate; we infer by contaminant NaCl contributing to conduction in hydrate, to values in agreement with resistivities observed in well logs through hydrate–saturated sediment. The addition of silt and sand lowers the conductivity of hydrate synthesized from seawater by an amount consistent with Archie's law. Here, all samples were characterized using cryogenic scanning electron microscopy and energy dispersive spectroscopy, which show good connectivity of salt and brine phases. Electrical conductivity measurements of pure hydrate and hydrate mixed with silt during pressure–induced dissociation support previous conclusions that sediment increases dissociation rate.

58 GEOSCIENCES↗
DOE OSTI2024

Electrical Conductivity and Sound Velocities of Talc Under High Pressure and High Temperature Conditions and Application to the Subducting Cocos Plate

Talc is expected to be an important water carrier in Earth's upper mantle, and understanding its electrical and seismic properties under high pressure and temperature conditions is required to detect possible talc-rich regions in subduction zones imaged using geophysical observations. Here, we conducted acoustic and electrical experiments on natural talc aggregates at relevant pressure-temperature conditions. Compressional wave velocity (V p ) was measured using ultrasonic interferometry in a Paris-Edinburgh press at pressures up to 3.4 GPa and temperatures up to 873 K. Similar Vp values are obtained regardless of the initial crystallographic preferred orientation of the samples, which can be explained by talc grain reorientation during the experiment, with the (001) plane becoming perpendicular to the uniaxial compression axis. Electrical conductivity of the same starting material was determined using impedance spectroscopy in a multi-anvil press up to 6 GPa and 1263 K. Two conductivity jumps are observed, at ∼860–1025 K and ∼940–1080 K, depending on pressure, and interpreted as talc dehydroxylation and decomposition, respectively. Electrical anisotropy is observed at low temperature and decreases with increasing pressure (∼10 at 1.5 GPa and ∼2 at 3.5 GPa). Comparison of acoustic and electrical results with geophysical observations in central Mexico supports the presence of a talc-bearing layer atop the subducted Cocos plate.

Cocos plate↗
DOE OSTI2020

Optimization of the electron transport layer in quantum dot light-emitting devices

Quantum dot light-emitting devices have emerged as an important technology for display applications. Their emission is a result of recombination between positive and negative charge carriers that are transported through the hole and electron conductive layers, respectively. The selection of electron or hole transport materials in these devices not only demands the alignment of energy levels between the layers but also balances the flow of electrons and holes toward the recombination sites. In this work, we examine a method for device optimization through control of the charge carrier kinetics. We employ impedance spectroscopy to examine the mobility of charge carriers through each of the layers. The derived mobility values provide a path to estimate the transition time of each charge carrier toward the emitting layer. We suggest that an optimal device structure can be obtained when the transition times of both charge carriers toward the active layer are similar. Finally, we examine our hypothesis by focusing on thickness optimization of the electron transport layer.

36 MATERIALS SCIENCE↗