SEARCH · Search NASA

Results for “initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Ground testing on the nonvented fill method of orbital propellant transfer: Results of initial test series

The results are presented of a series of no-vent fill experiments conducted on a 175 cu ft flightweight hydrogen tank. The experiments consisted of the nonvented fill of the tankage with liquid hydrogen using two different inlet systems (top spray, and bottom spray) at different tank initial conditions and inflow rates. Nine tests were completed of which six filled in excess of 94 percent. The experiments demonstrated a consistent and repeatable ability to fill the tank in excess of 94 percent using the nonvented fill technique. Ninety-four percent was established as the high level cutoff due to requirements for some tank ullage to prevent rapid tank pressure rise which occurs in a tank filled entirely with liquid. The best fill was terminated at 94 percent full with a tank internal pressure less than 26 psia. Although the baseline initial tank wall temperature criteria was that all portions of the tank wall be less than 40 R, fills were achieved with initial wall temperatures as high as 227 R.

Chato, David J.↗

NASA NTRS1991

Extension-bend-twist coupling behavior of thin-walled advanced composite beams with initial twist

An analytical model is developed for assessing the extension-bend-twist coupling behavior of nonhomogeneous anisotropic beams with initial twist. The model is formulated as a coupled two-dimensional boundary value problem, where the displacement solutions are defined with pretwist-dependent functions that represent the extension, bending, and torsion, and unknown functions that represent local in-plane deformations and out-of-plane cross-section warping. The unknown deformation functions are determined by applying the principle of minimum potential energy to a discretized representation of the cross section. Numerical results are presented that fully verify this approach and illustrate the strong extension-twist coupling behavior present in pretwisted beams with thin-wall laminated composite cross sections as a function of ply angle, initial twist level, and initial twist axis location. Cross-sections analyzed include; thin laminated rectangles with either asymmetric or symmetric ply stacking sequences and a thin-wall single cell D-section composed of a graphite/epoxy woven cloth.

Kosmatka, J. B.↗

NASA NTRS1991

La/Sm ratios in mare basalts as a consequence of mafic cumulate fractionation from an initial lunar magma

A model is constructed for the La/Sm ratio and the abundance of chrondrite-normalized La in different proportions of partial melts of a mafic cumulate source that might have settled to the bottom of an initial lunar magma ocean prior to any plagioclase separation. It is proposed that La/Sm ratios and chrondrite-normalized La abundances of common mare basalts are found in partial melts only if: the mafic cumulate consists mostly of clinopyroxene, a very low fraction of the cumulate melts, and the cumulate represents a moderate to high proportion of the crystallization of the initial magma ocean. Only if the partitioning of clinopyroxene is forced to mimic plagioclase (DLa is greater than DSm) do the present modeling results become compatible with the scenario for producing appropriate parent melts of mare basalts from mafic cumulates. It is found unlikely that parent melts of mare basalts were produced from mafic cumulates of an initial lunar magma ocean that had not had any plagioclase crystallization.

Shaffer, E. E.↗

NASA NTRS1991

Ground testing of the nonvented fill method of orbital propellant transfer - Results of initial test series

The results are presented of a series of no-vent fill experiments conducted on a 175 cu ft flightweight hydrogen tank. The experiments consisted of the nonvented fill of the tankage with liquid hydrogen using two different inlet systems (top spray, and bottom spray) at different tank initial conditions and inflow rates. Nine tests were completed of which six filled in exceess of 94 percent. The experiments demonstrated a consistent and repeatable ability to fill the tank in excess of 94 percent using the nonvented fill technique. Ninety-four percent was established as the high level cutoff due to requirements for some tank ullage to prevent rapid tank pressure rise which occurs in a tank filled entirely with liquid. The best fill was terminated at 94 percent full with a tank internal pressure less than 26 psia. Although the baseline initial tank wall temperature criteria was that all portions of the tank wall be less than 40 R, fills were achieved with initial wall temperatures as high as 227R.

Chato, David J.↗

NASA NTRS1991

Ultrastructural and cytochemical evidence for single impulse initiation zones in vestibular macular nerve fibers of rat

Cupric ion-ferricyanide labeling methods and related ferrocyanide-stained tissues were used to locate the characterize, at the ultrastructural level, presumptive impulse initiation zones in the three types of vestibular macular nerve fibers. Large-diameter, M-type vestibular nerve fibers terminate in a calyx at the heminode, and labeling is coextensive with the base of the calyx. Intermediate, M/U-type nerve fibers have short, unmyelinated preterminal segments that sometimes bifurcate intamacularly, and small-diameter, U-type nerve fibers have long, unmyelinated preterminal axons and up to three branches. Preterminals of these nerve fibers display ultrastructural heterogeneity that is correlated with labeling patterns for sodium channels and/or associated polyanionic sites. They have a nodelike ultrastructure and label heavily from near the heminode to the base of the macula. Their intramacular branches, less organized ultrastructurally, label only slightly. Results indicate that vestibular nerve fibers have one impulse initiation zone, located near the heminode, that varies in length according to nerve fiber type. Structural heterogeneity may favor impulse conduction in the central direction, and length of the impulse initiation zone could influence nerve discharge patterns.

Ross, Muriel D.↗

NASA NTRS1991

Observation and numerical simulation of a convective initiation during COHMEX

Under a synoptically undisturbed condition, a dual-peak convective lifecycle was observed with the COoperative Huntsville Meteorological EXperiment (COHMEX) observational network over a 24-hour period. The lifecycle included a multicell storm, which lasted about 6 hours, produced a peak rainrate exceeding 100 mm/hr, and initiated a downstream mesoscale convective system. The 24-hour accumulated rainfall of this event was the largest during the entire COHMEX. The downstream mesoscale convective system, unfortunately, was difficult to investigate quantitatively due to the lack of mesoscale observations. The dataset collected near the time of the multicell storm evolution, including its initiation, was one of the best datasets of COHMEX. In this study, the initiation of this multicell storm is chosen as the target of the numerical simulations.

Song, J. Aaron↗

NASA NTRS1991

An assessment of prospects for international cooperation on the Space Exploration Initiative

This paper discusses the unique characteristics of the Space Exploration Initiative (SEI) which will have to be taken into account if the Initiative is to become an international one; the technical capabilities offered by prospective international partners; the political and economic prospects for proceeding with the Initiative both in the United States and elsewhere; and the advantages and disadvantages of various possible approaches to international cooperation on SEI. SEI preparatory activities are likely to extend over a several-year period. Such an extended preparatory period should provide the time needed for coordinating studies, for identifing interests and potential contributions, and for resolving the numerous planning, budgeting, organizational and political issues which will have to be dealt with if such a complex undertaking is to be successfully internationalized.

Cline, Lynn F. H.↗

NASA NTRS1991

Observations of fatigue crack initiation and damage growth in notched titanium matrix composites

The purpose was to characterize damage initiation and growth in notched titanium matrix composites at room temperature. Double edge notched or center open hole SCS-6/Ti-15-3 specimens containing 0 deg plies or containing both 0 and 90 deg plies were fatigued. The specimens were tested in the as-fabricated (ASF) and in heat-treated conditions. A local strain criterion using unnotched specimen fatigue data was successful in predicting fatigue damage initiation. The initiation stress level was accurately predicted for both a double edge notched unidirectional specimen and a cross-plied center hole specimen. The fatigue produced long multiple cracks growing from the notches. These fatigue cracks were only in the matrix material and did not break the fibers in their path. The combination of matrix cracking and fiber/matrix debonding appears to greatly reduce the stress concentration around the notches. The laminates that were heat treated showed a different crack growth pattern. In the ASF specimens, matrix cracks had a more tortuous path and showed considerable more crack branching. For the same specimen geometry and cyclic stress, the (0/90/0) laminate with a hole had far superior fatigue resistance than the matrix only specimen with a hole.

Naik, Rajiv A.↗

NASA NTRS1992

An energy analysis of crack-initiation and arrest in epoxy

The objective of this work is to study fracture processes such as crack initiation and arrest in epoxy. A compact tension specimen with displacement-controlled loading is employed to observe multiple crack initiations and arrests. The energy release rate at crack initiation is significantly higher than that at crack arrest, as has been observed elsewhere. In this study, the difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in strength theory, is conventionally attributed to the statistics of defects which control the fracture process. Triangular shaped ripples, deltoids, are formed on the fracture surface of the epoxy during the slow sub-critical crack growth, prior to the smooth mirrorlike surface characteristic of fast cracks. The deltoids are complimentary on the two crack faces which excludes any inelastic deformation from consideration. The deltoids are analogous to the ripples created on a river surface downstream from a small obstacle. However, in spite of the expectation based on this analogy and the observed scale effect, there are no 'defects' at the apex of the deltoids detectable down to the 0.1 micron level. This suggests that the formation of deltoids during the slow process of subcritical crack growth is an intrinsic feature of the fracture process itself, triggered by inhomogeneity of material on a submicron scale. This inhomogeneity may be related to a fluctuation in the cross-link density of the epoxy.

Chudnovsky, A.↗

NASA NTRS1992

Space Exploration Initiative - Overview, current status, near term plans

An overview is presented of the Space Exploration Initiative (SEI) describing current activities, accomplishemnts, and directions. The program is considered in terms of activities relevant to the three phases which are: manned robotic/precursor missions, manned lunar missions, and manned Mars missions. SEI is shown to be in the First Lunar Outpost (FLO) mission phase which is based on an early manned lunar return, and development is described of earth-to-orbit (ETO) vehicles, a translunar injection stage, and a lunar surface habitat. Two ETO vehicles are considered, and the translunar injection stage is illustrated. The FLO mission is also considered as an initiation of the design activity for the Mars mission so that the requirements and preliminary designs could be defined. The FLO program demonstrates the feasibility of a manned return to the moon as an initiation of subsequent SEI activities.

Adams, Alan M.↗

NASA NTRS1993

Research on diabatic initialization

The objective of this research is to contribute to the improvement of the analyses of irrotational wind and moisture fields in the tropics through advancement in the technique of initialization, incorporating diabatic effects and use of satellite-derived, radiometric imagery data that are not used currently by operational centers. Significant accomplishments during the period of May 1991 - April 1992 in research involving the following are presented: impact of tropical initialization upon the spin-up of precipitation forecasts; and a unified approach to diabatic initialization for improvement in the analysis of divergence and water vapor fields in the tropics. Focus of current research and plans for next year are discussed with respect to the topics of controlling the precipitation over shoot during the early part of a numerical forecast and the use of satellite imagery data for improvement of the tropical analysis.

Kashara, Akira↗

NASA NTRS1993

Laser diode initiated detonators for space applications

Ensign Bickford Aerospace Company (EBAC) has over ten years of experience in the design and development of laser ordnance systems. Recent efforts have focused on the development of laser diode ordnance systems for space applications. Because the laser initiated detonators contain only insensitive secondary explosives, a high degree of system safety is achieved. Typical performance characteristics of a laser diode initiated detonator are described in this paper, including all-fire level, function time, and output. A finite difference model used at EBAC to predict detonator performance, is described and calculated results are compared to experimental data. Finally, the use of statistically designed experiments to evaluate performance of laser initiated detonators is discussed.

Ewick, David W.↗

NASA NTRS1992

Cold dissipationless collapse of spherical systems - Sensitivity to the initial density law

The collapse of cold, initially spherical systems with varying degrees of central condensation is investigated. The way in which the final shape of a collapsing system depends on the initial density law is examined. For an initial stellar number density rho varies as r exp -n, where n is in the range 0-2.5, the final, nearly prolate shape is given by a/c is approximately equal to 1.28(1 + 0.16 n), where a/c is the ratio of long to short axes of the inertia ellipsoid computed from the moment of inertia tensor of the most tightly bound 80 percent of the mass. The properties associated with the final states in the present computations are also studied. The collapsing systems develop an anisotropic halo dominated by radial orbits surrounding an isotropic core as predicted by Burkert (1990).

Cannizzo, John K.↗

NASA NTRS1993

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

Sawyer, J. C., Jr.↗

NASA NTRS1993

A study of subsurface crack initiation produced by rolling contact fatigue

Results of subsurface crack initiation studies produced by pure rolling contact fatigue in 7075-T6 aluminum alloy are presented in this article. Microstructural changes and subsequent crack initiation below the contacting surface in cylindrical test specimens subjected to repeated rolling contact are illustrated. The rolling conditions are simulated in a three-dimensional elastic-plastic finite element model in order to estimate the plastic strains and residual stresses in the test material. The numerically estimated distribution of plastic strains in the model correlate well with the extent of microstructural changes observed in the test specimen. Results also indicate that a combination of plastic strains and low values of residual stresses is conducive to subsurface crack initiation and growth.

Kumar, Arun M.↗

NASA NTRS1994

The Flow Induced by the Coalescence of Two Initially Stationary Drops

The coalescence of two initially stationary drops of different size is investigated by solving the unsteady, axisymmetric Navier-Stokes equations numerically, using a Front-Tracking/Finite Difference method. Initially, the drops are put next to each other and the film between them ruptured. Due to surface tension forces, the drops coalesce rapidly and the fluid from the small drop is injected into the larger one. For low nondimensional viscosity, or Ohnesorge number, little mixing takes place and the small drop fluid forms a blob near the point where the drops touched initially. For low Ohnesorge number, on the other hand, the small drop forms a jet that penetrates far into the large drop. The penetration depth also depends on the size of the drops and shows that for a given fluid of sufficiently low viscosity, there is a maximum penetration depth for intermediate size ratios.

Nobari, M. R.↗

NASA NTRS1994

Microstructurally based model of fatigue initiation and growth

A model to calculate fatigue life is developed based on the assumption that fatigue life is entirely composed of crack growth from an initial microstructural inhomogeneity. Specifically, growth is considered to start from either an ellipsoidal void, a cracked particle, or a debonded particle. The capability of predicting fatigue life from material microstructure is based on linear elastic fracture mechanics principles, the sizes of the crack-initiating microstructural inhomogeneities, and an initiation parameter that is proportional to the cyclic plastic zone size. A key aspect of this modeling approach is that it is linked with a general purpose probability program to analyze the effect of the distribution of controlling microstructural features within the material. This enables prediction of fatigue stress versus life curves for various specimen geometries using distributional statistics obtained from characterizations of the microstructure. Results are compared to experimental fatigue data from an aluminum alloy.

Brockenbrough, J. R.↗

NASA NTRS1994

Kinetics model for initiation and promotion for describing tumor prevalence from HZE radiation

A kinetics model for cellular repair and misrepair for multiple radiation-induced lesions (mutation-inactivation) is coupled to a two-mutation model of initiation and promotion in tissue to provide a parametric description of tumor prevalence in the Harderian gland in a mouse. Dose-response curves are described for gamma-rays and relativistic ions. The effects of nuclear fragmentation are also considered for high-energy proton and alpha particle exposures The model described provides a parametric description of age-dependent cancer induction for a wide range of radiation fields. We also consider the two hypotheses that radiation acts either solely as an initiator or as both initiator and promoter and make model calculations for fractionation exposures from gamma-rays and relativistic Fe ions. For fractionated Fe exposures, an inverse dose-rate effect is provided by a promotion hypothesis using a mutation rate for promotion typical of single-gene mutations.

Cucinotta, Francis A.↗