Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Orbital operations study. Volume 2: Interfacing activities analysis. Part 2: Structural and mechanical group

The activities of the structural and mechanical activity group of the orbital operations study project are discussed. Element interfaces, alternate approaches, design concepts, operational procedures, functional requirements, design influences, and approach selection are presented. The following areas are considered: (1) mating, (2) orbital assembly, (3) separation, EOS payload deployment, and EOS payload retraction.

Mattson, H. L.↗
NASA NTRS2015

Waveguide Photonic Choke Joint with Wide Out-of-Band Rejection

A photonic choke joint structure with a wide-stop-band is proposed for use as a waveguide flange interface. The structure consists of arrays of square metal pillars arranged in a periodic pattern to suppress the dominant-mode wave propagation in parallel-plate waveguide over a wide frequency bandwidth. The measurement results at microwave frequencies confirm that the structure can provide broadband suppression of more than 56dB over 6.25 times its operating frequency. Applications at millimeter wavelength are discussed.

U-yen, Kongpop↗
NASA NTRS2015

Waveguide Photonic Choke Joint with Wide Out-of-Band Rejection

A photonic choke joint structure with a wide- stop-band is proposed for use as a waveguide flange interface. The structure consists of arrays of square metal pillars arranged in a periodic pattern to suppress the dominant-mode wave propagation in parallel-plate waveguide over a wide frequency bandwidth. The measurement results at microwave frequencies confirm the structure can provide broadband suppression, more than 56 dB over 6.25 times its operating frequency. Applications at millimeter wavelength are discussed.

U-yen, Kongpop↗
NASA NTRS1994

Architecture of a distributed multimission operations system

This paper presents an architecture to develop a multimission operations systems, which we call DIOSA. In this architecture, a component used as a building block is called a functional block. Each functional block has a standard structure, and the interface between functional blocks are defined with a set of standard protocols. This paper shows the structure of the database used by functional blocks, the structure of interfaces between functional blocks, and the structure of system management. Finally, examples of typical functional blocks and an example of a system constructed with this architecture is shown.

Yamada, Takahiro↗
DOE OSTI2025

Quantitative characterization of ZrO2 gate dielectric interface with tellurium

Tellurium (Te) has recently emerged as a promising p-type semiconductor that can be processed at low temperatures, compatible with back end of line CMOS integration. Characterization of tellurium–dielectric interfaces is essential for further device advancements. Here, the interface quality of Te with ZrO2 gate dielectric is studied in a metal-oxide semiconductor capacitor structure. The interface trap density (Dit) is measured as a function of atomic layer deposition (ALD) temperature, without the use of a seed layer. Given the low thermal budget of Te, the ALD temperature is shown to be particularly important. The lowest Dit of 5 × 1012 states/cm2 eV is obtained at a low ALD process temperature of 120 °C. To further assess the impact of Dit on device performance, field-effect transistors (FETs) were fabricated. The subthreshold swing and effective hole mobility of the FETs were analyzed in relation to Dit, emphasizing the importance of a defect-minimized interface for enhancing Te transistor performance.

Byeon, Kyeong-Jae↗
NASA NTRS1993

Total systems design analysis of high performance structures

Designer-control parameters were identified at interdiscipline interfaces to optimize structural systems performance and downstream development and operations with reliability and least life-cycle cost. Interface tasks and iterations are tracked through a matrix of performance disciplines integration versus manufacturing, verification, and operations interactions for a total system design analysis. Performance integration tasks include shapes, sizes, environments, and materials. Integrity integrating tasks are reliability and recurring structural costs. Significant interface designer control parameters were noted as shapes, dimensions, probability range factors, and cost. Structural failure concept is presented, and first-order reliability and deterministic methods, benefits, and limitations are discussed. A deterministic reliability technique combining benefits of both is proposed for static structures which is also timely and economically verifiable. Though launch vehicle environments were primarily considered, the system design process is applicable to any surface system using its own unique filed environments.

Verderaime, V.↗
NASA NTRS2017

An Application Programming Interface for Synthetic Snowflake Particle Structure and Scattering Data

The work by Kuo and colleagues on growing synthetic snowflakes and calculating their single-scattering properties has demonstrated great potential to improve the retrievals of snowfall. To grant colleagues flexible and targeted access to their large collection of sizes and shapes at fifteen (15) microwave frequencies, we have developed a web-based Application Programming Interface (API) integrated with NASA Goddard's Precipitation Processing System (PPS) Group. It is our hope that the API will enable convenient programmatic utilization of the database. To help users better understand the API's capabilities, we have developed an interactive web interface called the OpenSSP API Query Builder, which implements an intuitive system of mechanisms for selecting shapes, sizes, and frequencies to generate queries, with which the API can then extract and return data from the database. The Query Builder also allows for the specification of normalized particle size distributions by setting pertinent parameters, with which the API can also return mean geometric and scattering properties for each size bin. Additionally, the Query Builder interface enables downloading of raw scattering and particle structure data packages. This presentation will describe some of the challenges and successes associated with developing such an API. Examples of its usage will be shown both through downloading output and pulling it into a spreadsheet, as well as querying the API programmatically and working with the output in code.

reflectivity properties of snowflakes↗
NASA NTRS1989

Novel applications of optical techniques to the study of buried semiconductor interfaces

Detailed electronic and structural information about buried semiconductor interfaces obtained through application of optical techniques is discussed. The measurements described include the determination of band discontinuities, strain, and disorder associated with semiconductor heterointerfaces. The contactless and nondestructive nature of these optical techniques is particularly important for the study of heterointerfaces which are inherently inaccessible to direct electrical or physical contact.

Wilson, Barbara A.↗
DOE OSTI2021

Formation of pyrophosphates across grain boundaries induces the formation of mismatched but oriented interfaces in silver phosphate polypods

The interfaces and their misfit defects determine the materials properties for a wide range of applications, such as electronic devices, photocatalysis, and mechanical engineering, etc. However, current understanding of atomic interfacial structures is limited. Here we discover a special interfacial structure, mismatched but oriented interface via two distinct facets. Transmission and scanning electron microscopy results suggest that, in Ag 3 PO 4 polypods structures, interfaces of {1 0 0} and {1 1 0}, ({1 0 0}/(1 1 0}), {1 0 0}/{1 1 1}, {1 1 0}/{1 1 1}, and {1 0 0}/{1 0 0}, etc., have a certain orientation relationship, corresponding to the energy minima and coincident site lattice of interfacial atoms as demonstrated by molecular dynamics simulations. Density functional theory demonstrates that the formation of pyrophosphate and/or phosphates rotation to bond across the interface compensate the lattice mismatch at the interfaces, as well as deformations of Ag-O bonds. Furthermore, our work opens up a new avenue for a much wider range of interfacial structures, allow for a higher diversity of structures, and shine light on tailoring crystal structures, morphologies, and the resulting properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Arc Jet Testing of the TIRS Cover Thermal Protection System for Mars Exploration Rover

This paper summarizes the arc jet test results of the Mars Exploration Rover (MER) Silicone Impregnated Reusable Ceramic Ablator (SIRCA) Transverse Impulse Rocket System (TIRS) Cover test series in the Panel Test Facility (PTF) at NASA Ames Research Center (ARC). NASA ARC performed aerothermal environment analyses, TPS sizing and thermal response analyses, and arc jet testing to evaluate the MER SIRCA TIRS Cover design and interface to the aeroshell structure. The primary objective of this arc jet test series was to evaluate specific design details of the SIRCA TIRS Cover interface to the MER aeroshell under simulated atmospheric entry heating conditions. Four test articles were tested in an arc jet environment with various sea] configurations. The test condition was designed to match the predicted peak flight heat load at the gap region between the SIRCA and the backshell TPS material, SLA-561S, and resulted in an over-test (with respect to heat flux and heat load) for the apex region of the SIRCA TIRS Cover. The resulting pressure differential was as much as twenty times that predicted for the flight case, depending on the location, and there was no post-test visual evidence of over-heating or damage to the seal, bracket, or backshell structure. The exposed titanium bolts were in good condition at post-test and showed only a small amount of oxidation at the leading edge locations. Repeatable thermocouple data were obtained and SIRCA thermal response analyses were compared to applicable thermocouple data. For the apex region of the SIRCA TIRS Cover, a one-dimensional thermal response prediction proved overly conservative, as there were strong multi-dimensional conduction effects evident from the thermocouple data. The one-dimensional thermal response prediction compared well with the thermocouple data for the leading edge "lip" region at the bolt location. In general, the test results yield confidence in the baseline seal design to prevent hot gas ingestion at the bracket and composite aeroshell structure interface.

Szalai, Christine E.↗
NASA NTRS1984

EVA-glass interface bond stability

The ethylene vinyl acetate/glass interface bond stability was investigated. Special methods to determine the structure of polymer/glass interface were developed. Structural changes related to hydrothermal degradation of polymer/glass interface are examined. Methods to inhibit the degradation reaction which occur at polymer/glass interface are developed.

Koenig, J. L.↗
NASA NTRS1993

Mass-additive modal test method for verification of constrained structural models

A method for deriving constrained or fixed-base modes and frequencies from free-free modes of a structure with mass-loaded boundaries is developed. Problems associated with design and development of test fixtures can be avoided with such an approach. The analytical methodology presented is used to assess applicability of the mass-additive method for three types of structures and to determine the accuracy of derived constrained modes and frequencies. Results show that mass loading of the boundaries enables local interface modes to be measured within a desired frequency bandwidth, thus allowing constrained modes to be derived with considerably fewer free-free modes than for unloaded boundaries. Good convergence was obtained for a simple beam and a truss-like Shuttle payload, both of which had well-spaced modes and stiff interface support structures. Slow convergence was obtained for a space station module prototype, a shell-like structure having high modal density.

Admire, John R.↗
DOE OSTI2022

Discovery of two-dimensional binary nanoparticle superlattices using global Monte Carlo optimization

Binary nanoparticle (NP) superlattices exhibit distinct collective plasmonic, magnetic, optical, and electronic properties. Here, we computationally demonstrate how fluid-fluid interfaces could be used to self-assemble binary systems of NPs into 2D superlattices when the NP species exhibit different miscibility with the fluids forming the interface. We develop a basin-hopping Monte Carlo (BHMC) algorithm tailored for interface-trapped structures to rapidly determine the ground-state configuration of NPs, allowing us to explore the repertoire of binary NP architectures formed at the interface. By varying the NP size ratio, interparticle interaction strength, and difference in NP miscibility with the two fluids, we demonstrate the assembly of an array of exquisite 2D periodic architectures, including AB-, AB 2 -, and AB 3 -type monolayer superlattices as well as AB-, AB 2 -, A 3 B 5 -, and A 4 B 6 -type bilayer superlattices. Our results suggest that the interfacial assembly approach could be a versatile platform for fabricating 2D colloidal superlattices with tunable structure and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural dynamics at cytosolic interprotomer interfaces control gating of a mammalian TRPM5 channel

The transient receptor potential melastatin (TRPM) tetrameric cation channels are involved in a wide range of biological functions, from temperature sensing and taste transduction to regulation of cardiac function, inflammatory pain, and insulin secretion. The structurally conserved TRPM cytoplasmic domains make up >70 % of the total protein. To investigate the mechanism by which the TRPM cytoplasmic domains contribute to gating, we employed electrophysiology and cryo-EM to study TRPM5—a channel that primarily relies on activation via intracellular Ca 2+ . Here, we show that activation of mammalian TRPM5 channels is strongly altered by Ca 2+ -dependent desensitization. Structures of rat TRPM5 identify a series of conformational transitions triggered by Ca 2+ binding, whereby formation and dissolution of cytoplasmic interprotomer interfaces appear to control activation and desensitization of the channel. This study shows the importance of the cytoplasmic assembly in TRPM5 channel function and sets the stage for future investigations of other members of the TRPM family.

Science & Technology - Other Topics↗
DOE OSTI2020

Over What Length Scale Does an Inorganic Substrate Perturb the Structure of a Glassy Organic Semiconductor?

While the bulk structure of vapor-deposited glasses has been extensively studied, structure at buried interfaces has received little attention, despite being important for organic electronic applications. To learn about glass structure at buried interfaces, we study the structure of vapor-deposited glasses of the organic semiconductor DSA-Ph (1,4-di-[4-(N,N-diphenyl)amino]styrylbenzene) as a function of film thickness; the structure is probed with grazing incidence X-ray scattering. Here, we deposit on silicon and gold substrates and span a film thickness range of 10–600 nm. Our experiments demonstrate that interfacial molecular packing in vapor-deposited glasses of DSA-Ph is more disordered compared to the bulk. At a deposition temperature near room temperature, we estimate ~8 nm near the substrate can have modified molecular packing. Molecular dynamics simulations of a coarse-grained representation of DSA-Ph reveal a similar length scale. In both the simulations and the experiments, deposition temperature controls glass structure beyond this interfacial layer of a few nanometers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Atom-by-atom imaging of moiré transformations in 2D transition metal dichalcogenides

Understanding the atomic-scale mechanisms that govern the structure of interfaces is critical across materials systems but particularly so for two-dimensional (2D) moiré materials. Here, we image, atom-by-atom, the thermally induced structural evolution of twisted bilayer transition metal dichalcogenides using in situ transmission electron microscopy. We observe low-temperature, local conversion of moiré superlattice into nanoscale aligned domains. Unexpectedly, this process occurs by nucleating a new grain within one monolayer, whose crystal orientation is templated by the other. The aligned domains grow through collective rotation of moiré supercells and hopping of 5|7 defect pairs at moiré boundaries. This provides mechanistic insight into the atomic-scale interactions controlling moiré structures and illustrates the potential to pattern interfacial structure and properties of 2D materials at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2019

Durability Characterization of Mechanical Interfaces in Solar Sail Membrane Structures

The construction of a solar sail from commercially available metallized film presents several challenges. The solar sail membrane is made by seaming together strips of metallized polymer film. This requires seaming together a preselected width and thickness of a base material into the required geometry, and folding the assembled sail membranes into a small stowage volume prior to launch. The sail membranes must have additional features for connecting to rigid structural elements (e.g., sail booms) and must be electrically grounded to the spacecraft bus to prevent charge build up. Space durability of the material and mechanical interfaces of the sail membrane assemblies will be critical for the success of any solar sail mission. In this study, interfaces of polymer/metal joints in a representative solar sail membrane assembly were tested to ensure that the adhesive interfaces and the fastening grommets could withstand the temperature range and expected loads required for mission success. Various adhesion methods, such as surface treatment, commercial adhesives, and fastening systems, were experimentally evaluated and will be discussed.

Interface↗
DOE OSTI2021

Manipulating meso-scale solvent structure from Pd nanoparticle deposits in deep eutectic solvents

Deep Eutectic Solvents (DESs) are complex solutions that present unique challenges compared to traditional electrolytes. Unlike most electrolytes and ionic liquids, DESs have delicate hydrogen bond networks that are responsible for their highly sensitive compositional dependence on the melting point. Prior work has demonstrated unique nanoscale structure both experimentally and theoretically that brings both challenges and opportunities to their adoption in traditional electrochemical processes. In this study, we use in-situ sample-rotated ultra-small angle X-ray scattering to resolve the near-interface solvent structure after electrodepositing Pd nanoparticles onto a glassy carbon electrode in choline chloride:urea and choline chloride:ethylene glycol DESs. Our results indicate that solvent structure can be observed on the meso-scale in the choline chloride:urea and choline chloride:ethylene glycol systems. Importantly, this extended solvent structure peaks at -0.5 V (vs. Ag/AgCl) and decreases slightly with higher overpotentials during Pd electrodeposition. Experimentally, the nature of this structure is more pronounced in the ethylene glycol system, as evidenced by both the X-ray scattering as well as the electrochemical impedance spectroscopy (EIS). Here, molecular dynamics simulations and dipolar orientation analysis reveal that chloride delocalization near the Pd interface and long-range interactions between the choline and each hydrogen bond donor are very different and qualitatively consistent with the experimental data. These results show how the long-range solvent-deposit interactions can be tuned by changing the hydrogen bond donor in the DES and the applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗