Search NASA⌕ Search

SEARCH · Search NASA

Results for “interphase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

The Effect of Fluoroethylene Carbonate as an Additive on the Solid Electrolyte Interphase on Silicon Lithium-Ion Electrodes

Fluoroethylene carbonate (FEC) has become a standard electrolyte additive for use with silicon negative electrodes, but how FEC affects solid electrolyte interphase (SEI) formation on the silicon anode’s surface is still not well understood. Herein, SEI formed from LiPF6-based carbonate electrolytes, with and without FEC, were investigated on 50 nm thick amorphous silicon thin film electrodes to understand the role of FEC on silicon electrode surface reactions. In contrast to previous work, anhydrous and anoxic techniques were used to prevent air and moisture contamination of prepared SEI films. This allowed for accurate characterization of the SEI structure and composition by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry depth profiling. These results show that FEC reduction leads to fluoride ion and LiF formation, consistent with previous computational and experimental results. Surprisingly, we also find that these species decrease lithium-ion solubility and increase the reactivity of the silicon surface. We conclude that the effectiveness of FEC at improving the Coulombic efficiency and capacity retention is due to fluoride ion formation from reduction of the electrolyte, which leads to the chemical attack of any silicon-oxide surface passivation layers and the formation of a kinetically stable SEI comprising predominately lithium fluoride and lithium oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorus Enrichment as a New Composition in the Solid Electrolyte Interphase of High-Voltage Cathodes and Its Effects on Battery Cycling

Immersion of a solid into liquid often leads to the modification of both the structure and chemistry of surface of the solid, which subsequently affects the chemical and physical properties of the system. For the case of the rechargeable lithium ion battery, such a surface modification is termed as solid electrolyte interphase (SEI) layer, which has been perceived to play critical role for the stable operation of the batteries. However, the structure and chemical composition of SEI layer and its spatial distribution and dependence on the battery operating condition remain unclear. By using aberration corrected scanning transmission electron microscopy coupled with ultra-high sensitive energy dispersive x-ray spectroscopy, we probed the structure and chemistry of SEI layer on several high voltage cathodes. We show that layer-structured cathodes, when cycled at a high cut off voltage, can form a P-rich SEI layer on their surface, which is a direct evidence of Li-salt (LiPF6) decomposition. Our systematical investigations indicate such cathode/Li-salt side reaction shows strong dependence on structure of the cathode materials, operating voltage and temperature, indicating the feasibility of SEI engineering. These findings provide us valuable insights into the complex interface between the high-voltage cathode and the electrolyte.

Environmental Molecular Sciences Laboratory↗

Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation

In this work, we have synthesized the products of fluoroethylene carbonate (FEC) and vinylene carbonate (VC) via lithium naphthalenide reduction. By analyzing the resulting solid precipitates and gas evolution, our results confirm that both FEC and VC decomposition products include HCO 2 Li, Li 2 C 2 O 4 , Li 2 CO 3 , and polymerized VC. For FEC, our experimental data supports a reduction mechanism where FEC reduces to form VC and LiF, followed by subsequent VC reduction. In the FEC reduction product, HCO 2 Li, Li 2 C 2 O 4 , and Li 2 CO 3 were found in smaller quantities than in the VC reduction product, with no additional fluorine environments being detected by solid-state nuclear magnetic resonance or X-ray photoelectron spectroscopy analysis. With these additives being practically used in higher (FEC) and lower (VC) concentrations in the base electrolytes of lithium-ion batteries, our results suggest that the different relative ratios of the inorganic and organic reduction products formed by their decomposition may be relevant to the chemical composition and morphology of the solid electrolyte interphase formed in their presence.

36 MATERIALS SCIENCE↗

Thermal Decomposition of the Solid Electrolyte Interphase (SEI) on Silicon Electrodes for Lithium Ion Batteries

Here, thermal behavior of the solid electrolyte interphase (SEI) on a silicon electrode for lithium ion batteries has been investigated by TGA. In order to provide a better understanding of the thermal decomposition of the SEI on silicon, the thermal decomposition behavior of independently synthesized lithium ethylene dicarbonate (LEDC) was investigated as a model SEI. The model SEI (LEDC) has three stages of thermal decomposition. Over the temperature range of 50–300 °C, LEDC decomposes to evolve CO 2 and C 2 H 4 gases leaving lithium propionate (CH 3 CH 2 CO 2 Li) and Li 2 CO 3 as solid residues. The lithium propionate decomposes over the temperature range of 300–600 °C to evolve pentanone leaving Li 2 CO 3 as a residual solid. Finally, the Li 2 CO 3 decomposes over 600 °C to evolve CO 2 leaving Li 2 O as a residual solid. A very similar thermal decomposition process is observed for the SEI generated on cycled silicon electrodes. However, two additional thermal decomposition reactions were observed characteristic of Li x PO y F z at 300 °C and the polyimide binder at 550 °C. TGA measurements of Si electrodes after various numbers of cycles suggest that the LEDC on Si electrodes thermally decomposes during cycling to form lithium propionate and Li 2 CO 3 , resulting in increased complexity of the SEI.

36 MATERIALS SCIENCE↗

Compositions and Formation Mechanisms of Solid-Electrolyte Interphase on Microporous Carbon/Sulfur Cathodes

We report the formation mechanism and compositions of a solid-electrolyte interphase (SEI) on a microporous carbon/sulfur (MC/S) cathode in Li–S batteries using a carbonate-based electrolyte (1 M LiPF 6 in ethylene carbonate (EC)/dimethyl carbonate, v:v = 1:1). Through characterizations using 1D and 2D solution-phase nuclear magnetic resonance spectroscopy, coupled with model chemical reactions and DFT calculations, we have identified two critical roles of Li + in steering the SEI formation. First, the preferential solvation of Li + by EC in the mixed carbonate electrolyte renders EC as the dominant participant in the SEI formation, and second, Li + coordination to the EC carbonyl alters activation barriers and changes the reaction pathways relative to Na + . The main organic components in the SEI are identified as lithium ethylene monocarbonate and lithium methyl carbonate, which are virtually identical to those formed on Li and graphite anodes of lithium-ion batteries but via a different pathway.

25 ENERGY STORAGE↗

Investigation of Solid Electrolyte Interphase Formed on Si Nanoparticle Composite Electrodes Using Hyperpolarized 129 Xe Nuclear Magnetic Resonance Spectroscopy

Solid electrolyte interphase (SEI) plays an important role in determining electrochemical performances of Li-ion batteries. The ideal SEI layer protects the electrolyte from being further reduced on the electrode surface and allows Li-ion diffusion in and out of electrodes without any consumption. However, degradation of the SEI layer over time, which contributes to the thickening of the SEI layer, is a leading pathway for gradual capacity fade. In this study, a hyperpolarized (HP) 129 Xe nuclear magnetic resonance (NMR) technique was applied for the first time to probe changes in porosity and connectivity in Si nanoparticle composite electrodes as a result of the SEI formation. Nanopores are present in nanocomposite electrodes as a result of aggregation of the constituting nanoparticles. The connectivity among nanopores greatly affects the ion transport property of the electrode materials, which has a substantial influence on the overall energy output of Li-ion batteries. Here, information on thickness, uniformity of the SEI layer, and connectivity of the pores in the composite electrodes upon growing SEI was obtained from the analysis of temperature-dependent HP 129 Xe NMR spectra. Such information is useful for gaining a better understanding of the degradation mechanism of SEI. This study demonstrates that HP 129 Xe NMR is a potentially unique tool in probing the porosity and connectivity changes in porous practical electrodes during electrochemical cycling.

25 ENERGY STORAGE↗

Voltage-Dependent First-Principles Barriers to Li Transport within Li-Ion Battery Solid Electrolyte Interphases

Charging a Li-ion battery requires Li-ion transport between the cathode and the anode. This Li-ion transport is dependent on (among other factors) the electrostatic environment that the ion encounters within the solid electrolyte interphase (SEI), which separates the anode from the surrounding electrolyte. A previous first-principles work has illuminated the reaction barriers through likely atomistic SEI environments but has had difficulty accurately reflecting the larger electrostatic potential landscape that an ion encounters moving through the SEI. In this work, we apply the recently developed quantum continuum approximation (QCA) technique to provide an equilibrium electronic potentiostat for first-principles interface calculations. Using QCA, we calculate the potential barrier for Li-ion transport through LiF, Li 2 O, and Li 2 CO 3 SEIs along with LiF–LiF and LiF–Li 2 O grain boundaries, all paired with Li metal anodes. Here, we demonstrate that the SEI potential barrier is dependent on the electrochemical potentials of the anode in each system. Finally, we use these techniques to estimate the change in the diffusion barrier for a Li ion moving in a LiF SEI as a function of the anode potential. We find that properly accounting for interface and electronic voltage effects significantly lowers reaction barriers compared with previous literature results.

25 ENERGY STORAGE↗

Direct determination of solid-electrolyte interphase thickness and composition as a function of state of charge on a silicon anode

Using neutron reflectometry we have determined the thickness and chemistry of the solid-electrolyte interphase (SEI) layer grown on a silicon anode as a function of state of charge and during cycling. We show the chemistry of this SEI layer becomes more LiF like with increasing lithiation and more Li-C-O-F like with delithiation. More importantly the SEI layer thickness appears to increase (about 250 ) as the electrode becomes less lithiated and thins to 180 with increasing Li content (Li 3.7 Si). We attribute this breathing to the continual consumption of electrolyte with cycling.

25 ENERGY STORAGE↗

Automatic Generation of Chemical Mechanisms for Electrochemical Systems: Solid Electrolyte Interphase Formation in Lithium Batteries

Electrolytes in many lithium ion batteries decompose at the low potentials near the anode. The decomposition products form a layer termed the solid electrolyte interphase (SEI). The composition and growth of the SEI layer significantly affect both the capacity fade and safety of lithium ion batteries. However, SEI formation and growth kinetics are not well understood. In this work, we present an extension of the Reaction Mechanism Generator (RMG) software to automatically generate mechanisms for SEI formation. We extend RMG’s solvation correction framework to account for kinetic solvent effects and demonstrate the accuracy of our technique. We calculate thermochemical parameters for 252 species and rate coefficients for 69 reactions, most with associated solvation corrections. This and additional quantum chemistry data are used to extend RMG’s thermodynamic group additivity and solute parameter estimation schemes to handle lithiated species and add 14 new reaction families to RMG. RMG is additionally extended to simulate electrocatalytic systems. Lastly, we demonstrate RMG on the decomposition of acetonitrile and ethylene carbonate near a battery anode. Furthermore, while this framework does not yet resolve individual ions, as appropriate thermochemistry estimators are not available, and thus, cannot yet resolve more complex electrochemical pathways, RMG is able to generate reasonable pathways for SEI formation that match literature pathways and products. In particular, RMG identifies a new important reaction pathway that is not present in literature.

Chemical reactions↗

Buildup of the Solid Electrolyte Interphase on Lithium-Metal Anodes: Reactive Molecular Dynamics Study

Using reactive molecular dynamics simulations, we evaluate atomistic-level interactions leading to the formation of surface films on a Li-metal (100) surface in contact with an electrolyte solution. We observe the evolution of the interfacial region and the formation of well-defined regions with varying density and oxidation state of Li; the penetration of electrolyte molecules and in some cases their electron transfer-driven decomposition leading to the initial formation of solid electrolyte interphase products. The simulations are done in the absence of a bias potential and using various electrolyte compositions including highly reactive solvents such as ethylene carbonate and less reactive solvents such as 1,3-dioxolane mixed with a 1 M concentration of a lithium salt. The structure and oxidation state of Li and some of the fragments are followed through the metal dissolution process. The results are important to understand the nature of the Li-metal anode/electrolyte interface at open-circuit potential.

25 ENERGY STORAGE↗

LiNi0.8Mn0.1Co0.1O2 Thin Films Prepared by Polymer-Assisted Deposition for the Study of Cathode-Electrolyte Interphases in Lithium-Ion Batteries

High-nickel layered oxide cathodes such as LiNi0.8Mn0.1Co0.1O2 (NMC811) are critical for next-generation lithium-ion batteries (LIBs) due to their superior energy density and reduced reliance on cobalt. However, many Ni-rich cathodes suffer from rapid capacity fade and structural instability originating from complex interfacial reactions at the cathode-electrolyte interface. Traditional composite electrodes exhibit degradation mechanisms that are challenging to quantitatively understand due to additives, including binders and carbon black. In this study, we demonstrate a new synthesis approach for binder- and additive-free NMC811 thin films using polymer-assisted deposition (PAD). PAD-NMC811 are model thin-film cathodes for investigating interfacial phenomena that can be obscured in composite cathodes. Structural and chemical characterization by X-ray diffraction, soft X-ray absorption spectroscopy, and atomic force microscopy show that PAD-NMC811 films possess high phase purity, crystallinity, chemical homogeneity, and morphological uniformity. Electrochemical analyses using cyclic voltammetry and galvanostatic cycling revealed electrochemical behavior consistent with that of composite electrodes, along with a moderate capacity fade indicative of cathode-electrolyte interphase (CEI) formation. Our findings illustrate the effectiveness of PAD synthesis of thin films tailored for detailed mechanistic studies, which offer critical insights into CEI evolution and cathode degradation pathways.

25 ENERGY STORAGE↗

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.

25 ENERGY STORAGE↗

High Current Cycling in a Superconcentrated Ionic Liquid Electrolyte to Promote Uniform Li Morphology and a Uniform LiF-Rich Solid Electrolyte Interphase

High-energy-density systems with fast charging rates and suppressed dendrite growth are critical for the implementation of efficient and safe next-generation advanced battery technologies such as those based on Li metal. However, there are few studies that investigate reliable cycling of Li metal electrodes under high-rate conditions. in this work, by employing a superconcentrated ionic liquid (IL) electrolyte, we highlight the effect of Li salt concentration and applied current density on the resulting Li deposit morphology and solid electrolyte interphase (SEI) characteristics, demonstrating exceptional deposition/dissolution rates and efficiency in these systems. Operation at higher current densities enhanced the cycling efficiency, e.g., from 64 ± 3% at 1 mA cm –2 up to 96 ± 1% at 20 mA cm –2 (overpotential <±0.2 V), while resulting in lower electrode resistance and dendrite-free Li morphology. A maximum current density of 50 mA cm –2 resulted in 88 ± 3% cycling efficiency, displaying tolerance for high overpotentials at the Ni working electrode (0.5 V). X-ray photoelectron microscopy (XPS), time-of-flight secondary-ion mass spectroscopy (ToF-SIMS), and scanning electron microscopy (SEM) surface measurements revealed that the formation of a stable SEI, rich in LiF and deficient in organic carbon species, coupled with nondendritic and compact Li morphologies enabled enhanced cycling efficiency at higher currents. Reduced dendrite formation at high current is further highlighted by the use of a highly porous separator in coin cell cycling (1 mAh cm –2 at 50 °C), sustaining 500 cycles at 10 mA cm –2 .

25 ENERGY STORAGE↗

Effect of Salt Concentration on the Interfacial Solvation Structure and Early Stage of Solid–Electrolyte Interphase Formation in Ca(BH 4 ) 2 /THF for Ca Batteries

The Ca 2+ solvation structure at the electrolyte/electrode interface is of central importance to understand electroreduction stability and solid–electrolyte interphase (SEI) formation for the novel multivalent Ca battery systems. Here, using an exemplar electrolyte, the concentration-dependent solvation structure of Ca(BH 4 ) 2 -tetrahydrofuran on a gold model electrode has been investigated with various electrolyte concentrations via electrochemical quartz crystal microbalance with dissipation (EQCM-D) and X-ray photoelectron spectroscopy (XPS). For the first time, in situ EQCM-D results prove that the prevalent species adsorbed at the interface is CaBH 4 + across all concentrations. As the salt concentration increases, the number of BH 4 – anions associated with Ca 2+ increases, and much larger solvated complexes such as CaBH 4 + ·4THF or Ca(BH 4 ) 3 – ·4THF form at the interface at high concentrations prior to Ca plating. Different interfacial chemistries lead to the formation of SEIs with different components demonstrated by XPS. High electrolyte concentrations reduce the solvent decomposition and promote the formation of thick, uniform, and inorganic-rich (i.e., CaO) SEI layers, which contribute to improved Ca plating efficiency and current density in electrochemical measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the Chemistry of the Cathodic Electrolyte Interphase for PTFE-Based Dry-Processed Cathodes

Dry processing is a promising method for high-performance and low-cost lithium-ion battery manufacturing which uses polytetrafluoroethylene (PTFE) as a binder. However, the electrochemical stability of the PTFE binder in the cathodes and the generated chemistry of the cathode electrolyte interphase (CEI) layers are rarely reported. In this work, the CEI properties and PTFE electrochemical stability are studied via cycling the high-loading dry-processed electrodes in electrolytes with LiPF 6 or LiClO 4 salt. Using LiClO 4 salt can eliminate other possible F sources, allowing the decomposition of PTFE to be studied. The detection of LiF in cells with the LiClO 4 salt confirms that PTFE undergoes side reaction(s) in the cathodes. When compared with LiClO 4 , the CEI layer is much thicker when LiPF 6 is used as the electrolyte salt. These results provide insights into the CEI layer and may potentially enlighten the development of binders and electrolytes for the high efficiency and long durability of DP-based LIBs.

25 ENERGY STORAGE↗

Electric-Field-Induced Assembly of an Ionic Liquid–Water Interphase Enables Efficient Heavy Metal Electrosorption

Controlling ion desolvation, transport, and charge transfer at the electrode-electrolyte interface (EEI) is critical to enabling the rational design of efficient and selective separation of targeted heavy metals and decontamination of industrial waste water. One challenge is to sufficiently resolve and interrogate the intermediate transformation steps between solvated metal cations and bare cations for electroreduction at the EEI and establish pathways to modulate these steps to achieve efficient energy transfer for targeted reactive separations. Herein, we obtained a predictive understanding of the effect of adding a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium chloride (EMIMCl), to an aqueous electrolyte on modulating the desolvation and electrosorption of Pb 2+ cations using a combination of experimental and theoretical techniques. Here, we reveal formation of a compact interphase layer consisting of EMIMCl-Pb complex clusters under an applied electric field using operando electrochemical Raman spectroscopy, atomic force microscopy, and electrochemical impedance spectroscopy measurements combined with classical molecular dynamics simulations. The application of a larger negative potential is shown to result in formation of a well oriented layer with the positive imidazolium ring of the EMIMCl lying on the electrode and the long hydrophobic alkyl chain extending into the bulk electrolyte. This oriented layer is demonstrated to facilitate desolvation of incoming solvated Pb 2+ cations and decrease the charge transfer resistance for Pb electrodeposition, which has important implications for selective removal of Pb from contaminated mixtures. Overall, our studies open up new opportunities to modulate ion desolvation using hydrophobic ionic liquids in aqueous electrolytes for efficient heavy metal separation.

36 MATERIALS SCIENCE↗

Revealing of the Activation Pathway and Cathode Electrolyte Interphase Evolution of Li-Rich 0.5Li 2 MnO 3 ·0.5LiNi 0.3 Co 0.3 Mn 0.4 O 2 Cathode by in Situ Electrochemical Quartz Crystal Microbalance

The first-cycle behavior of layered Li-rich oxides, including Li 2 MnO 3 activation and cathode electrolyte interphase (CEI) formation, significantly influences their electrochemical performance. However, the Li 2 MnO 3 activation pathway and the CEI formation process are still controversial. Here, the first-cycle properties of xLi 2 MnO 3 ·(1- x) LiNi 0.3 Co 0.3 Mn 0.4 O 2 ( x = 0, 0.5, 1) cathode materials were studied with an in situ electrochemical quartz crystal microbalance (EQCM). The results demonstrate that a synergistic effect between the layered Li 2 MnO 3 and LiNi 0.3 Co 0.3 Mn 0.4 O 2 structures can significantly affect the activation pathway of Li 1.2 Ni 0.12 Co 0.12 Mn 0.56 O 2 , leading to an extra-high capacity. It is demonstrated that Li 2 MnO 3 activation in Li-rich materials is dominated by electrochemical decomposition (oxygen redox), which is different from the activation process of pure Li 2 MnO 3 governed by chemical decomposition (Li 2 O evolution). CEI evolution is closely related to Li + extraction/insertion. Finally, the valence state variation of the metal ions (Ni, Co, Mn) in Li-rich materials can promote CEI formation. This study is of significance for understanding and designing Li-rich cathode-based batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of Inactive Lithium and Solid–Electrolyte Interphase Species on Graphite Electrodes after Fast Charging

Rapid charging of Li-ion batteries is limited by lithium plating on graphite anodes, whereby Li+ ions are reduced to Li metal on the graphite particle surface instead of inserting between graphitic layers, which directly contributes to cell capacity loss because of the low reversibility of the Li plating/stripping process. Furthermore, precisely identifying the onset and amount of Li plating is therefore vital in order to remedy these issues. We demonstrate a titration technique with a detection limit of 20 nmol (5 × 10 –4 mAh) of Li that can be used to quantify inactive Li that remains on the graphite electrode after fast charging. The titration is extended to quantify the total amount of solid carbonate species and lithium acetylide (Li 2 C 2 ) within the solid–electrolyte interphase (SEI), and electrochemical modeling is used to determine the Li plating exchange current density (10 A/m 2 ) and stripping efficiency (65%) of plated Li metal on graphite. These techniques provide a highly accurate measure of the onset of Li plating and quantitative insight into graphite SEI evolution during fast charging.

25 ENERGY STORAGE↗