Search NASA⌕ Search

SEARCH · Search NASA

Results for “intrinsic defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Library of Atomically Thin 2D Materials Featuring the Conductive-Point Resistive Switching Phenomenon

Non-volatile resistive switching (NVRS) is a widely available effect in transitional metal oxides, colloquially known as memristors, and of broad interest for memory technology and neuromorphic computing. Until recently, NVRS was not known in other transitional metal dichalcogenides (TMDs), an important material class owing to their atomic thinness enabling the ultimate dimensional scaling. Here, various monolayer or few-layer 2D materials are presented in the conventional vertical structure that exhibit NVRS, including TMDs (MX 2 , M = transitional metal, e.g., Mo, W, Re, Sn, or Pt; X = chalcogen, e.g., S, Se, or Te), TMD heterostructure (WS2/MoS2), and an atomically thin insulator (h-BN). These results indicate the universality of the phenomenon in 2D non-conductive materials, and feature low switching voltage, large ON/OFF ratio, and forming-free characteristic. A dissociation–diffusion–adsorption model is proposed, attributing the enhanced conductance to metal atoms/ions adsorption into intrinsic vacancies, a conductive-point mechanism supported by first-principle calculations and scanning tunneling microscopy characterizations. Our results motivate further research in the understanding and applications of defects in 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pressure-induced order–disorder transitions in β-In 2 S 3 : an experimental and theoretical study of structural and vibrational properties

We report this joint experimental and theoretical study of the structural and vibrational properties of β-In 2 S 3 upon compression shows that this tetragonal defect spinel undergoes two reversible pressure-induced order–disorder transitions up to 20 GPa. We propose that the first high-pressure phase above 5.0 GPa has the cubic defect spinel structure of α-In 2 S 3 and the second high-pressure phase ($\phi$-In 2 S 3 ) above 10.5 GPa has a defect α-NaFeO 2 -type (R$\bar{3}$) structure. This phase, related to the NaCl structure, has not been previously observed in spinels under compression and is related to both the tetradymite structure of topological insulators and to the defect LiTiO 2 phase observed at high pressure in other thiospinels. Structural characterization of the three phases shows that α-In 2 S 3 is softer than β-In 2 S 3 while $\phi$-In 2 S 3 is harder than β-In 2 S 3 . Vibrational characterization of the three phases is also provided, and their Raman-active modes are tentatively assigned. Our work shows that the metastable α phase of In 2 S 3 can be accessed not only by high temperature or varying composition, but also by high pressure. On top of that, the pressure-induced β–α–$\phi$ sequence of phase transitions evidences that β-In 2 S 3 , a B III 2 X V 3 compound with an intriguing structure typical of A II B III 2 X VI 4 compounds (intermediate between thiospinels and ordered-vacancy compounds) undergoes: (i) a first phase transition at ambient pressure to a disordered spinel-type structure (α-In 2 S 3 ), isostructural with those found at high pressure and high temperature in other B III 2 X V 3 compounds; and (ii) a second phase transition to the defect α-NaFeO 2 -type structure ($\phi$-In 2 S 3 ), a distorted NaCl-type structure that is related to the defect NaCl phase found at high pressure in A II B III 2 X VI 4 ordered-vacancy compounds and to the defect LiTiO 2 -type phase found at high pressure in A II B III 2 X VI 4 thiospinels. This result shows that In 2 S 3 (with its intrinsic vacancies) has a similar pressure behaviour to thiospinels and ordered-vacancy compounds of the A II B III 2 X VI 4 family, making β-In 2 S 3 the union link between such families of compounds and showing that group-13 thiospinels have more in common with ordered-vacancy compounds than with oxospinels and thiospinels with transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2021

Development and Characterization of Lightweight Durable Composite Conductor for Cables

Sustainable aviation in the form of electrified propulsion is likely to lead to an increase in the electrical assets contained within a single aircraft. As a result, it is desirable to design light weight conductor materials, thus reducing the payload of components like motor windings, low voltage signal cables, and transmission cables for data and power. One approach involves replacing pure Cu wiring with metalized CNT composites. This paper evaluates a framework for modeling overall conductivity and current sharing within such composites. Processing methods and parameters were refined. Select electroplated samples outperformed pure Cu in conductivity and had comparable ultimate tensile strengths. Tensile strengths are expected to improve with an additional densification step during processing. Acoustic emission data was used to predict the failure mechanism of the composite. Theories explaining improved intrinsic conductivity are discussed, with a focus on chemical and mechanical interactions at the Cu-CNT interface. These include Cu infiltration of CNT crevices, CNT oxidation, activity at defects in CNT walls, and the release of carbide-forming metals from CNT walls. Validating any or all these theories will require further work replicating data, collecting electron micrographs and conducting chemical analyses.

Metalized CNT↗
DOE OSTI2020

2D Electrets of Ultrathin MoO 2 with Apparent Piezoelectricity

Since graphene, a variety of 2D materials have been fabricated in a quest for a tantalizing combination of properties and desired physiochemical behavior. 2D materials that are piezoelectric, i.e., that allow for a facile conversion of electrical energy into mechanical and vice versa, offer applications for sensors, actuators, energy harvesting, stretchable and flexible electronics, and energy storage, among others. Unfortunately, materials must satisfy stringent symmetry requirements to be classified as piezoelectric. Here, 2D ultrathin single-crystal molybdenum oxide (MoO 2 ) flakes that exhibit unexpected piezoelectric-like response are fabricated, as MoO 2 is centrosymmetric and should not exhibit intrinsic piezoelectricity. However, it is demonstrated that the apparent piezoelectricity in 2D MoO 2 emerges from an electret-like behavior induced by the trapping and stabilization of charges around defects in the material. Arguably, the material represents the first 2D electret material and suggests a route to artificially engineer piezoelectricity in 2D crystals. Specifically, it is found that the maximum out-of-plane piezoresponse is 0.56 pm V -1 , which is as strong as that observed in conventional 2D piezoelectric materials. The charges are found to be highly stable at room temperature with a trapping energy barrier of ≈2 eV.

36 MATERIALS SCIENCE↗
NASA NTRS1992

An energy analysis of crack-initiation and arrest in epoxy

The objective of this work is to study fracture processes such as crack initiation and arrest in epoxy. A compact tension specimen with displacement-controlled loading is employed to observe multiple crack initiations and arrests. The energy release rate at crack initiation is significantly higher than that at crack arrest, as has been observed elsewhere. In this study, the difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in strength theory, is conventionally attributed to the statistics of defects which control the fracture process. Triangular shaped ripples, deltoids, are formed on the fracture surface of the epoxy during the slow sub-critical crack growth, prior to the smooth mirrorlike surface characteristic of fast cracks. The deltoids are complimentary on the two crack faces which excludes any inelastic deformation from consideration. The deltoids are analogous to the ripples created on a river surface downstream from a small obstacle. However, in spite of the expectation based on this analogy and the observed scale effect, there are no 'defects' at the apex of the deltoids detectable down to the 0.1 micron level. This suggests that the formation of deltoids during the slow process of subcritical crack growth is an intrinsic feature of the fracture process itself, triggered by inhomogeneity of material on a submicron scale. This inhomogeneity may be related to a fluctuation in the cross-link density of the epoxy.

Chudnovsky, A.↗
DOE OSTI2026

Hydrogen defects in LaBi 2 O 4 X (X = Cl, Br, and I) Sillén oxyhalide phases and their impacts on ionic transport

Sillén oxyhalides have recently emerged as promising materials for both photocatalytic and ionic transport applications, yet the role of likely-ubiquitous hydrogen-related defects in these layered compounds remains largely unexplored. Here, we employ first-principles defect calculations to investigate incorporation energetics for hydrogen- and oxygen-related defects, as well as their migration barriers in LaBi 2 O 4 X (X = Cl, Br, I) phases. We find that hydrogen interstitials, particularly protonic species (H i + ), are readily accommodated within the open Bi–O layers. Protons compete with oxygen vacancy donors (V O 2+ ) and charge-compensate with oxygen interstitial acceptors (O i 2− ). By linking hydrogen defect formation to water- and oxygen-related redox equilibria, we reveal that V O 2+ facilitates H i + incorporation, while O i 2− promotes interstitial hydroxide formation, establishing a direct connection between proton and oxide-ion transport. Calculated migration barriers indicate that ionic diffusion is confined to Bi–O layers with low barriers of 0.20–0.25 eV for H i + and 0.14–0.25 eV for V O 2+ , suggesting that the materials contain intrinsic pathways for mixed ionic conduction. These results provide a microscopic picture of hydrogen behavior in Sillén oxyhalides and point to design strategies for integrating protonic and oxide-ion transport in layered oxyhalide electrolytes. Band-edge alignment analysis shows that LaBi 2 O 4 I provides the optimal combination of hydrogen solubility, oxygen defect stability, and mixed ionic conductivity, highlighting its potential for low-temperature electrochemical and energy-conversion applications. Overall, this work establishes the defect-driven origin of hydrogen transport in Sillén oxyhalides and expands their applicability beyond photocatalysis to mixed ionic conduction and hydrogen electrochemistry.

Energy - Conversion↗
DOE OSTI2022

The effect of elastic anisotropy on the symmetry selection of irradiation-induced void superlattices in cubic metals

We report self-organized microstructures and patterns have been widely observed in non-equilibrium physical systems. In particular, irradiation in metals creates far-from-equilibrium environments, in which the competing dynamics of defect production and annihilation can lead to unique self-organized superlattice structures, e.g., void and gas bubble superlattices. From a physical point of view, the superlattice structures are dictated by the intrinsic symmetry breaking in the metals, i.e., anisotropy caused by the breaking of continuous rotational symmetry. In the literature, two distinctive anisotropies, elastic anisotropy and diffusion anisotropy of interstitials, have been proposed to be the origins of superlattice formation. However, it is still unclear which anisotropy dominates the symmetry selection of superlattice structures. In this paper, we study elastic anisotropy and its effect on the symmetry of void superlattices. By using theoretical analyses and phase field simulations, we show that elastic anisotropy in cubic metals can lead to either face-centered cubic or simple cubic superlattices depending on the Zener anisotropy ratio. The superlattices formed under this elastic anisotropy mechanism must form under the influence of spinodal decomposition, as the mechanism requires perturbations in the vacancy concentration field to develop into spatially-static concentration waves. We compare to existing work on symmetry selection in superlattices via diffusion anisotropy and to experimental observations, and we suggest that concentration wave development under the influence of elastic anisotropy is not the mechanism for symmetry selection during the formation of irradiation-induced void superlattices, but that diffusion anisotropy could be the dominant mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ferroelectric Switching in Hybrid Molecular-Beam-Epitaxy-Grown BaTiO 3 Films

Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO 3 . However, direct measurement of the remnant polarization (P r ) has not been previously reported in MBE-grown BaTiO 3 films. We report the in situ growth of an all-epitaxial SrRuO 3 /BaTiO 3 /SrRuO 3 heterostructure on Nb-doped SrTiO 3 (001) substrates by hybrid MBE using metal–organic precursors. This capacitor structure consisting of 16 nm SrRuO 3 /40 nm BaTiO 3 /16 nm SrRuO 3 shows hysteretic polarization–electric field (P–E) curves with P r ∼ 15 μC cm –2 at frequencies ranging from 500 Hz to 20 kHz, after isolating the intrinsic ferroelectric response from non-ferroelectric contributions using the Positive-Up-Negative-Down (PUND) method. We hypothesize that the asymmetry in switching behavior and current leakage has origins in structural defects. Furthermore, this work opens the door to defect-engineered ferroelectric BaTiO 3 -based heterostructures grown by hybrid MBE for future electronic, photonic and spintronic applications.

SrRuO3 electrode↗
DOE OSTI2021

Microscopic relaxation channels in materials for superconducting qubits

Despite mounting evidence that materials imperfections are a major obstacle to practical applications of superconducting qubits, connections between microscopic material properties and qubit coherence are poorly understood. Here, we combine measurements of transmon qubit relaxation times ( T 1 ) with spectroscopy and microscopy of the polycrystalline niobium films used in qubit fabrication. By comparing films deposited using three different techniques, we reveal correlations between T 1 and intrinsic film properties such as grain size, enhanced oxygen diffusion along grain boundaries, and the concentration of suboxides near the surface. Qubit and resonator measurements show signatures of two-level system defects, which we propose to be hosted in the grain boundaries and surface oxides. We also show that the residual resistance ratio of the polycrystalline niobium films can be used as a figure of merit for qubit lifetime. This comprehensive approach to understanding qubit decoherence charts a pathway for materials-driven improvements of superconducting qubit performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Thermal evolution of ferroelectric behavior in epitaxial Hf 0.5 Zr 0.5 O 2

In this paper, we report a cryogenic-temperature study on the evolution of the ferroelectric properties of epitaxial Hf 0.5 Zr 0.5 O 2 thin films on silicon. Wake-up, endurance, and fatigue of these films are found to be intricately correlated, strongly hysteretic, and dependent on available thermal energy. Field-dependent measurements reveal a decrease in polarization with temperature, which has been determined not to be an intrinsic change of the material property, rather a demonstration of the increase in the coercive bias of the material. Our findings suggest that a deficiency in thermal energy suppresses the mobility of defects presumed to be oxygen vacancies during wake-up and trapped injected charge during fatigue, which is responsible for polarization evolution during cycling. This permits accelerated wake-up and fatigue effects at high temperatures where thermal energy is abundant but delays these effects at cryogenic temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Radiation effects in Mn+1AXn phases

M n+1 AX n phases exhibit unique laminated atomic structures that result in properties typical of both ceramics and metals. Due to their unusual characteristics, these materials have been proposed for use in a wide variety of industrial applications, including in nuclear reactors—both fission and fusion systems—where they will be exposed to extreme irradiation conditions and high temperatures. Recently, numerous studies have investigated radiation effects on the M n+1 AX n phases, revealing complex behavior—phase transformations, surface modification, and mechanical property changes—induced by ion or neutron irradiation over a range of temperatures. This review summarizes recent experimental and theoretical work on the response of the M n+1 AX n phases to irradiation and discusses the intrinsic controls on the radiation tolerance of these materials. Based on the review of the present body of work, a comprehensive understanding of the mechanisms of irradiation-induced structural modification and defect evolution in M n+1 AX n phases is developed, as well as proposed strategies for designing novel M n+1 AX n phases with enhanced performance under extreme irradiation conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Machine learning-based multidomain processing for texture-based image segmentation and analysis

Atomic and molecular resolved atomic force microscopy (AFM) images offer unique insights into materials' properties such as local ordering, molecular orientation, and topological defects, which can be used to pinpoint physical and chemical interactions occurring at the surface. Utilizing machine learning for extracting underlying physical parameters increases the throughput of AFM data processing and eliminates inconsistencies intrinsic to manual image analysis, thus enabling the creation of reliable frameworks for qualitative and quantitative evaluation of experimental data. Here, we present a robust and scalable approach to the segmentation of AFM images based on flexible pre-selected classification criteria. The usage of supervised learning and feature extraction allows us to retain the consideration of specific problem-dependent features (such as types of periodical structures observed in the images and the associated numerical parameters: spacing, orientation, etc.). We highlight the applicability of this approach for the segmentation of molecular resolved AFM images based on the crystal orientation of the observed domains, automated selection of boundaries, and collection of relevant statistics. Finally, we outline a general strategy for machine learning-enabled analysis of nanoscale systems exhibiting periodic order that could be applied to any analytical imaging technique

36 MATERIALS SCIENCE↗
DOE OSTI2022

Concentric core-shell tracks and spectroscopic properties of SrTiO 3 under intense electronic excitation

A deeper understanding of the intrinsic link between the irradiation-induced microstructures and the corresponding spectroscopic properties is becoming increasingly attractive for the research fields of materials science, physics, and information technology. In this work, the structural damage response, spectroscopic features, and associated physical mechanisms of SrTiO 3 single crystals under swift heavy ion irradiation were comparatively analyzed using a combination of experimental and theoretical approaches. Corresponding to 0.11–5.00 MeV/u ion irradiation with electronic energy loss ranging from 4.0 to 29.3 keV/nm, the inelastic thermal spike calculations combined with molecular dynamics simulations are compared with the experimental observations, revealing the track fine structures (individual spherical defects with a disordered region, and discontinuous and continuous tracks consisting of an amorphous core and a disordered outer shell) and demonstrating the dominant effects of the deposition energy and lattice temperature on track damage formation and evolution; thus, two essential thresholds for defect formation of ~0.60 eV/atom and amorphous region formation of ~1.81 eV/atom were identified to better describe the concentric core-shell track structure. The enhanced nanohillock formation in the surface region is attributed to the combined action of kinetic and potential energy depositions, and the fluence dependence in regulating the hillock dimensions is also presented. The measured refractive index profiles along different crystal axes further indicate the anisotropy of irradiation-induced lattice expansion. With increasing ion fluence and damage level, the intrinsic bandgap gradually decreased, and the concentration of additional radiative recombination centers (1.81 eV, 2.31 eV, and 2.42 eV) accordingly increased in the SrTiO 3 crystal, providing the possibility of regulating related defects to achieve tunable/selective photon emission for more critical technological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Additively manufactured refractory high-entropy alloys with superior radiation resistance

Refractory high-entropy alloys (RHEAs) are promising candidates for next-generation nuclear and high-temperature applications. Among many approaches to manufacture RHEAs, additive manufacturing (AM) represents the most recent and advanced metal manufacturing method which allows near-net-shape manufacturing to reduce material waste and post-processing time. However, performance of AM RHEAs under complex irradiation conditions remains largely unexplored. Here, in this study, we demonstrate for the first time the response of directed energy deposition (DED) AM quaternary RHEAs (HfTaVW, CrTaVW) subjected to sequential dual-beam ion irradiation, consisting of helium pre-implantation followed by high-dose heavy ion bombardment. Compositions of DED AM RHEAs were selected using Monte Carlo (MC) simulations based on a cluster expansion (CE) Hamiltonian parameterized by density functional theory (DFT). Post-irradiation microstructural characterization revealed that the AM RHEA maintained remarkable stability, with suppressed helium bubble growth and reduced defect accumulation compared to conventional alloys. Even at high doses (∼100 dpa), the alloy exhibited no void swelling, a low density of dislocation loops, and no evidence of severe degradation. These results highlight the intrinsic ability of AM-derived microstructures and multicomponent chemistry to synergistically mitigate irradiation effects. Our findings establish AM RHEAs as a class of materials with superior resistance to radiation damage under conditions relevant to advanced fusion and fission environments and demonstrate the importance of sequential ion beam studies in evaluating their long-term performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ion-beam radiation-induced Eshelby transformations: The mean and variance in hydrostatic and shear residual stresses

Ion beam plays a pivotal role in ion implantations and the fabrication of nanostructures. However, there lacks a quantitative model to describe the residual stresses associated with the ion-beam radiation. Radiation-induced residual stress/transformation strain have been mostly recognized in the hydrostatic sub strain space. Here, in this study, we use molecular dynamics (MD) simulations to show that the response of a material to irradiation is generally anisotropic that depends on the ion-beam direction, and should be described using tensorial quantities. We demonstrate that accelerator-based ion beam irradiation, combined with the intrinsic lattice anisotropy and externally induced anisotropy (such as anisotropic mechanical loadings), causes radiation-actuated shear transformation strains in addition to hydrostatic expansion. We map out these complex correlations for several materials. Radiation-induced defects are shown to be responsible for residual shear stresses in the manner of Eshelby inclusion transformation. We propose such tensorial response model should be considered for accurate nanoscale fabrication using ion-beam irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Achieving high-ZT in Te/Se-based thermoelectric materials via volume-constrained shear-induced plastic deformation

This study investigated the correlation between severe plastic deformation and microstructural evolution, along with the corresponding response in the thermoelectric performance. Specifically, severe plastic deformation introduced into intrinsically brittle thermoelectric materials like Bi 2 Te 3 - x Se x leads to microstructural changes ranging from nano- to micro- scales, including phase transformation, phase segregation, and stacking faults. The resultant residual strain and lattice defects in the Bi 2 Te 3-x Se x materials led to engineering of electronic bands, which increases the effective mass of electrons while controlling their concentration, thereby enhancing the power factor.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Oxygen and carbon in silicon

The properties of the early transistors were determined by the minority-carrier lifetime, as is the silicon photovoltaic solar cell. Most of the devices on the modern integrated circuits are majority carrier devices, in part to avoid this lifetime dependence. The micro-electronics industry typically starts with wafers with a minority-carrier lifetime of 1000 micro-seconds, but during device fabrication this lifetime is reduced to beflow 1 micro-second, in spite of extraordinary cleanliness and precautions. Process-induced defects (PID) include point defects, defect complexes, line defects, and bulk precipitates. One of the aspects that needs to be better understood is the nature of minority carrier recombination at line defects and at precipitates. Some of the PIDs are known to be related to the fast-diffusers of the iron-series transition elements. One of the common techniques of dealing with these elements is intrinsic gettering by the oxygen precipitates. But even in the gettered state, there may be a residual effect on the lifetime. Oxygen is an almost ubiquitous impurity in silicon and plays an important role in both integrated circuits and solar cells. The isolated oxygen interstitial is electrically inactive, but in its various aggregated forms it has a variety of electrical activities. The agglomeration and precipitation of oxygen, including impurity gettering and the complicating role of carbon, is discussed.

Corbett, J. W.↗
DOE OSTI2022

Multi-Defect Detection in Additively Manufactured Lattice Structures Using 3D Electrical Resistance Tomography

Cellular lattice structures possess high strength-to-weight ratios suitable for advanced lightweight engineering applications. However, their quality and mechanical performance can degrade because of defects introduced during manufacturing or in-service. Their complexity and small length scale features make defects difficult to detect using conventional nondestructive evaluation methods. Here we propose a current injection-based method, electrical resistance tomography (ERT), that can be used to detect damaged struts in conductive cellular lattice structures with their intrinsic electromechanical properties. The reconstructed conductivity distributions from ERT can reveal the severity and location of damaged struts without having to probe each strut. However, the low central sensitivity of ERT may result in image artifacts and inaccurate localization of damaged struts. To address this issue, this study introduces an absolute, high throughput, conductivity reconstruction algorithm for 3D ERT. The algorithm incorporates a strut-based normalized sensitivity map to compensate for lower interior sensitivity and suppresses reconstruction artifacts. Numerical simulations and experiments on fabricated representative cellular lattice structures were performed to verify the ability of ERT to quantitatively identify single and multiple damaged struts. The improved performance of this method compared with classical ERT was observed, based on greatly decreased imaging and reconstructed value errors.

36 MATERIALS SCIENCE↗