Search NASA⌕ Search

SEARCH · Search NASA

Results for “isomer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Vibrational Signatures of Unrealized Phosphorus Suboxide Intermediates in White Phosphorus Oxidation Reactions

White phosphorus ignition notoriously produces the phosphoric acid anhydride P 4 O 10 , yet the intermediate oxidation steps remain undetermined. Here, we report the first geometric and vibrational characterization of two P 4 O 2 isomers, P 3 OPO and P 3 PO 2 , and substantiate a previously proposed cyclic P 4 O 2 isomer. We formally assign the infrared bands observed by Andrews and Mielke at 898 and 891 cm −1 to the antisymmetric P− O−P vibrations of P 3 OPO species. Additional bands corresponding to terminal P=O and −PO 2 stretches of P 3 OPO and P 3 PO 2 discussed herein also went unrecognized due to the peculiar bonding of P 4 O 2 species compared to oxo-bridged P 4 O x (x = 3−6) species. Sequential addition of oxygen atoms to the P 4 tetrahedron appears to form P 3 OPO and P 3 PO 2 , while cyclic P 4 O 2 is formed from P 2 O dimerization. CCSD(T) geometries, CCSD(T) + MP2[δVPT2] fundamental frequencies, and enthalpies of formation extrapolated using focal-point analysis are reported. The predicted enthalpies of formation relative to tetrahedral P 4 plus 3 Σ g − O 2 for bent-P 3 OPO, extended-P 3 OPO, P 3 PO 2 , and cyclic-P 4 O 2 are −93, −88, −85, and −63 kcal mol −1 , respectively.

Molecular structure↗
DOE OSTI2020

Cryogenic “Iodide-Tagging” Photoelectron Spectroscopy: A Sensitive Probe for Specific Binding Sites of Amino Acids

This work showcases cryogenic and temperature-dependent “iodide-tagging” photoelectron spectroscopy to probe specific binding sites of amino acids using the glycine-iodide complex (Gly?I-) as a case study. Multiple Gly?I- isomers were generated from ambient electrospray ionization and kinetically isolated in a cryogenic ion trap. These structures were characterized with temperature-dependent “iodide-tagging” negative ion photoelectron spectroscopy (NIPES) where iodide was used as the “messenger” to interpret electronic energetics and structural information of various Gly?I- isomers. Accompanied by theoretical computations and Franck-Condon simulations, a total of five cluster structures have been identified along with their various binding motifs. This work demonstrates that “iodide-tagging” NIPES is a powerful general means for probing specific binding interactions in biological molecules of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sodium Cationization Enables Exotic Deprotonation Sites on Gaseous Mononucleotides

In this work, we report observation and photoelectron spectroscopic characterization of sodium cationization on four doubly deprotonated mononucleotide dianions Na + ·[dNMP-2H] 2- (N = A, G, C, or T) in the gas phase. Multiple tautomers with distinct deprotonated sites are identified, in which Na+ enables novel double deprotonation patterns and folds resultant mononucleotide dianions. The most stable isomer for the whole family is derived from detaching one proton from phosphate and the other from nucleobase (amino group for N = A, G and C, but nitrogen atom for T), while a high-lying isomer with protons detached separately from phosphate and hydroxy group of sugar coexist. Particularly, an exotic deprotomer with both protons deprived from guanosine is populated as well. This work thus displays a remarkably diverse binding landscape enabled by sodium cationization, a potentially critical element in developing general formulism to better model metal cation and nucleotide interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Resolving Competing Ultraviolet Photoinduced Ring-Opening and Dissociation Pathways in Iodothiophenes by Ultrafast Electron Diffraction

The ultraviolet photochemistry of halothiophenes is thought to proceed via competing pathways, prompt C–X (X = halogen) bond fission, and parent ring opening followed by fragmentation, yet direct structural evidence distinguishing these mechanisms is limited. Here, time-resolved gas-phase ultrafast electron diffraction (UED) has been used to directly follow the structural dynamics of 2- and 3-iodothiophene following photoexcitation at 247 nm. For both isomers, the time-resolved pair distribution functions reveal the appearance of new interatomic distances that cannot be explained by simple C–I bond cleavage and formation of C 4 SH 3 radical cofragments. The signatures, particularly those for 2-iodothiophene, are consistent with a rival ring-opening channel of the intact parent, which evolve on time scales distinct from those associated with the direct C–I bond cleavage. In addition, the extracted kinetics indicate that the ring-opening channel occurs faster in 2-iodothiophene than in the 3-isomer at this excitation wavelength. Furthermore, these measurements provide direct geometric evidence for competing pathways leading to different structures following photodissociation in a model heteroaromatic and further establish UED as a sensitive probe of complex excited-state chemistry.

Bond cleavage↗
DOE OSTI2021

Diastereoselective Template Synthesis on Iron and Uranium

The addition of 2 equiv of t Bu 2 PSiMe 3 to 2,6-pyridinedicarboxaldehyde ((CHO) 2 Py) results in a rac / meso diastereomeric mixture of the PNP-chelating ligand 2,6-bis((trimethylsiloxy)(di- tert -butylphosphino)-methyl)-pyridine ( (OTMS) PNP t Bu ) ( 1 - r / m ) via addition of the P–Si bond across both of the aldehyde C–O bonds. Chelation of (OTMS) PNP t Bu to FeCl 2 results in the same diastereotopic ratio of ( (OTMS) PNP t Bu )FeCl 2 ( 2- r / m ) as the free ligand. Fractional crystallization allows for the isolation of the C 2 isomer, 2- r , and a template synthesis protocol allows for the synthesis and isolation of the C s isomer, 2- m , in good yield. Furthermore, the template synthesis protocol was also expanded to the f -block with the use of UCl 4 in order to assess the specificity of the template synthesis on a larger metal cation. This reaction performed on UCl 4 forms the meso diastereospecific uranium complex ( ( t Bu2P) ONO)UCl 2 (dtbpy), 3 - m , with observation of the rational intermediate ( (OTMS) PNO t Bu )UCl 3 (dtbpy), 4 - m , which arose from the respective formation of two- or one-equivalents of TMS–Cl and formation of the corresponding U–O bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗
DOE OSTI2020

The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface

The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.

Shangguan, Junnan↗
DOE OSTI2020

CO 2 Hydrogenation to Formate and Formic Acid by Bimetallic Palladium–Copper Hydride Clusters

Mass spectrometric analysis of the anionic products of interaction between bimetallic palladium-copper tetrahydride anions, PdCuH 4 – , and carbon dioxide, CO 2 , in a reaction cell shows an efficient generation of the PdCuCO 2 H 4 – intermediate and formate/formic acid complexes. Multiple structures of PdCuH 4 – and PdCuCO 2 H 4 – are identified by a synergy between anion photoelectron spectroscopy and quantum chemical calculations. The higher energy PdCuH 4 – isomer is shown to drive the catalytic hydrogenation of CO 2 , emphasizing the importance of accounting for higher energy isomers for cluster catalytic activity. In conclusion, this study represents the first example of CO 2 hydrogenation by bimetallic hydride clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fluoroarene Separations in Metal-Organic Frameworks with Two Proximal Mg 2+ Coordination Sites

Fluoroarenes which are widely used in medicinal, agricultural, and materials chemistry, and yet their production remains a critical challenge in organic synthesis. Indeed, the nearly identical physical properties of these vital building blocks hinders their purification by traditional methods, such as flash chromatography or distillation. As a result, the Balz-Schiemann reaction is currently employed to prepare fluoroarenes instead of more atom-economical C-H fluorination reactions, which produce inseparable mixtures of regioisomers. Herein, we propose an alternative solution to this problem: the purification of mixtures of fluoroarenes using metal-organic frameworks (MOFs). Specifically, we demonstrate that controlling the interaction of fluoroarenes with adjacent coordinatively unsaturated Mg 2+ centers within a MOF enables the separation of fluoroarene mixtures with unparalleled selectivities. Liquid-phase multicomponent equilibrium adsorption data and breakthrough measurements coupled with van der Waals-corrected density functional theory calculations reveal that the materials Mg 2 (dobdc) (dobdc 4- = 2,5-dioxidobenzene-1,4-dicarboxylate) and Mg 2 ( m -dobdc) ( m -dobdc 4- = 2,4-dioxidobenzene-1,5-dicarboxylate) are capable of separating the difluorobenzene isomers from one another. Additionally, these frameworks facilitate the separations of fluoroanisoles, fluorotoluenes, and fluorochlorobenzenes. In addition to enabling currently unfeasible separations for the production of fluoroarenes, our results suggest that carefully controlling the interaction of isomers with not one but two strong binding sites within a MOF provides a general strategy for achieving challenging liquid-phase separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oriented Electrostatic Effects on O 2 and CO 2 Reduction by a Polycationic Iron Porphyrin

Next-generation energy technologies require improved methods for rapid and efficient chemical-to-electrical energy transformations. One new approach has been to include atomically-positioned, electrostatic motifs in molecular catalysts to stabilize high-energy, charged intermediates. For example, an iron porphyrin bearing four cationic, ortho-N,N,N-trimethylanilinium groups (o-[N(CH 3 ) 3 ] + ) has recently been used to catalyze the complex, multi-step O 2 and CO 2 reduction reactions (ORR and CO 2 RR) with fast rates and at low overpotentials. The success of this catalyst is attributed, at least in part, to specific charge-charge interactions between the atomically-positioned o-[N(CH 3 ) 3 ] + groups and the bound substrate. However, by nature of the mono-ortho substitution pattern, there are four possible atropisomers of this metalloporphyrin and thus four unique electrostatic environments. This work reports that each of the four individual atropisomers catalyzes both the ORR and CO 2 RR with fast rates and low overpotentials. The maximum turnover frequencies (TOF max ) vary among the atropisomers, by a factor of 60 for the ORR and a factor of 5 for CO 2 RR. For the ORR, the αβαβ isomer is the fastest and has the highest overpotential, while for the CO 2 RR, the order is reversed and the αααα isomer is the fastest and has the highest overpotential. The role of charge-positioning is complex and can affect more than a single step such as CO 2 binding. These data offer a first-of-a-kind perspective on atomically positioned charge and highlight the significance of high charge density, rather than orientation, on the thermodynamics and kinetics of multistep molecular electrochemical transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydride-Containing Eight-Electron Pt/Ag Superatoms: Structure, Bonding, and Multi-NMR Studies

Recent reports on hydride-doped noble metal nanoclusters strongly suggest that the encapsulated hydride is a part of the superatom core, but no accurate location of the hydride could be experimentally proved, so far. Here, we report herein a hydride-doped eight-electron platinum/silver alloy nanocluster in which the position of four-coordinated hydride was determined by neutron diffraction for the first time. X-ray structures of [PtHAg 19 (dtp/desp) 12 ] (dtp = S 2 P(O n Pr) 2 , 1; dsep = Se 2 P(O i Pr) 2 , 2) describe a central platinum hydride (PtH) unit encapsulated within a distorted Ag 12 icosahedron, the resulting (PtH)@Ag 12 core being stabilized by an outer sphere made up of 7 capping silver atoms and 12 dichalcogenolates. Solid-state structures of 1 and 2 differ somewhat in the spatial configuration of their outer spheres, resulting in overall different symmetries, C 1 and C 3 , respectively. Whereas the multi-NMR spectra of 2 in solution at 173 K reveal that the structure of C 3 symmetry is the predominant one, 1 H and 195 Pt NMR spectra of 1 at the same temperature disclose the presence of isomers of both C 1 and C 3 symmetry. DFT calculations found both isomers to be very close in energy, supporting the fact that they co-exist in solution. They also show that the [PtH@Ag 12 ] 5+ kernel can be viewed as a closed-shell superatomic core, the μ4-hydride electron contributing to its eight-electron count. On the other hand, the 1s(H) orbital contributes only moderately to the superatomic orbitals, being mainly involved in the building of a Pt–H bonding electron pair with the 5d z 2 (Pt) orbital.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Control over Charge Separation by Imine Structural Isomerization in Covalent Organic Frameworks with Implications on CO 2 Photoreduction

Two-dimensional covalent organic frameworks (COFs) are an emerging class of photocatalytic materials for solar energy conversion. In this work, we report a pair of structurally isomeric COFs with reversed imine bond directions, which leads to drastic differences in their physical properties, photophysical behaviors, and photocatalytic CO 2 reduction performance after incorporating a Re(bpy)(CO) 3 Cl molecular catalyst through bipyridyl units on the COF backbone (Re-COF). Using the combination of ultrafast spectroscopy and theory, we attributed these differences to the polarized nature of the imine bond that imparts a preferential direction to intramolecular charge transfer (ICT) upon photoexcitation, where the bipyridyl unit acts as an electron acceptor in the forward imine case (f-COF) and as an electron donor in the reverse imine case (r-COF). These interactions ultimately lead the Re-f-COF isomer to function as an efficient CO 2 reduction photocatalyst, while the Re-r-COF isomer shows minimal photocatalytic activity. Furthermore, these findings not only reveal the essential role linker chemistry plays in COF photophysical and photocatalytic properties but also offer a unique opportunity to design photosensitizers that can selectively direct charges.

14 SOLAR ENERGY↗
DOE OSTI2024

UV-Induced Reaction Pathways in Bromoform Probed with Ultrafast Electron Diffraction

For many chemical reactions, it remains notoriously difficult to predict and experimentally determine the rates and branching ratios between different reaction channels. This is particularly the case for reactions involving short-lived intermediates, whose observation requires ultrafast methods. The UV photochemistry of bromoform (CHBr 3 ) is among the most intensely studied photoreactions. Yet, a detailed understanding of the chemical pathways leading to the production of atomic Br and molecular Br 2 fragments has proven challenging. In particular, the role of isomerization and/or roaming and their competition with direct C–Br bond scission has been a matter of continued debate. Here, in this work, gas-phase ultrafast megaelectronvolt electron diffraction (MeV-UED) is used to directly study structural dynamics in bromoform after single 267 nm photon excitation with femtosecond temporal resolution. The results show unambiguously that isomerization contributes significantly to the early stages of the UV photochemistry of bromoform. In addition to direct C–Br bond breaking within <200 fs, formation of iso-CHBr 3 (Br-CH-Br-Br) is observed on the same time scale and with an isomer lifetime of >1.1 ps. The branching ratio between direct dissociation and isomerization is determined to be 0.4 ± 0.2:0.6 ± 0.2, i.e., approximately 60% of molecules undergo isomerization within the first few hundred femtoseconds after UV excitation. The structure and time of formation of iso-CHBr 3 compare favorably with the results of an ab initio molecular dynamics simulation. The lifetime and interatomic distances of the isomer are consistent with the involvement of a roaming reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemistry of Sugar Formation in the Gas Phase: Following the Activated Aldehyde

Sugars are produced by living organisms, and are required building blocks for life as we know it, which raises the foundational question of how sugars formed in a prebiotic environment. The abiotic formose reaction produces sugars from formaldehyde, but our understanding of its initiation step remains murky, with chemists invoking the concept of an “activated aldehyde” to seed this reaction. Singlet hydroxycarbenes, high-energy isomers of aldehydes, were recently reported to facilitate sugar formation under cold, nonaqueous conditions relevant to interstellar environments. Here, we generate singlet methylhydroxycarbene ( 1 CH 3 –C̈–OH) from the photodissociation of pyruvic acid and experimentally measure its gas-phase reaction with d 4 -acetaldehyde using multiplexed photoionization mass spectrometry. The C 4 H 4 D 4 O 2 isomer d 4 -acetoin is the sole product, which we kinetically link to the reactant CH 3 –C̈–OH, and attribute to a carbonyl-ene formation mechanism. We see no evidence of 3-hydroxybutanal, the C–H insertion product expected in carbene chemistry. Using automated exploration we calculate stationary points on the potential energy surface and report master equation rate coefficients from T = 20–600 K, providing quantitative kinetics of this fast reaction for use in chemical models. The prereactive complex in this reaction is stabilized by both hydrogen bonding and electrophilic carbene C═O interactions. These effects create a short-range dynamical bottleneck for the reaction besides the long- and midrange barrierless bottlenecks. Combined with recent reports of 1 HC̈OH production from methanol photodissociation and pyruvic acid production in cold irradiated ices, this work provides evidence that singlet hydroxycarbene + aldehyde chemistry is a feasible path to prebiotic sugar formation.

aldehydes↗
DOE OSTI2026

Photo-DAC: Light-Driven Ambient-Temperature Direct Air Capture by a Photobase

Direct air capture (DAC) may reduce atmospheric CO 2 concentrations to preindustrial levels, yet the high energies and temperatures involved in current DAC technologies hinder large-scale deployment. In the case of aqueous-based CO 2 absorbents, a large energetic penalty is associated with heating and boiling off water, as required for thermally driven solvent regeneration. This could be avoided via photochemically driven pH swings involving photoacids or photobases, and harnessing abundant and renewable solar energy, though efficient solvent regeneration and recycling in a realistic multicycle DAC process remains challenging. Herein, we report a photochemically driven DAC process (photo-DAC) in which atmospheric CO 2 capture by an aqueous glycylglycine (GlyGly) solution is enabled through a pH swing by a pyridine-substituted diiminoguanidine (PyDIG) photobase. Upon irradiation with UV light, the PyDIG photobase undergoes photoisomerization from the E,E to the Z,Z isomer, corresponding to a pK a increase of 2.8 units that activates GlyGly for DAC through deprotonation. After the GlyGly/PyDIG solvent is saturated with atmospheric carbon dioxide, leaving it in the dark under ambient conditions leads to the isomerization of PyDIG from the Z,Z back to the E,E isomer, which is accompanied by a pH drop and CO 2 release. To demonstrate the recyclability of the GlyGly/PyDIG solvent, we have completed six consecutive DAC cycles, with a measured average cyclic capacity in the range of 0.21–0.26 mol CO 2 per mol of GlyGly/PyDIG. These results open the prospect for energy-efficient DAC cycles completed entirely at ambient conditions, thereby avoiding the significant energy penalties associated with heating and boiling aqueous solvents.

Einkauf, Jeffrey D. [Oak Ridge National Laboratory↗
DOE OSTI2026

Controlled Placement of Trivalent Heteroatoms in MFI Zeolite Frameworks Using Structure-Directing Agents

MFI zeolites contain distinct confining pore environments, either smaller (∼0.55 nm) channels or larger (∼0.70 nm) intersections. The substitution of trivalent heteroatoms generates Brønsted acid sites of varying acid strength, which, together with their location within different pore environments, dictates the stability of transition states via electrostatic (ion-pair) and van der Waals interactions. Here, we report that structure-directing agents (SDAs) that control Al 3+ substitutional patterns during MFI crystallization analogously position other trivalent heteroatoms (Ga 3+ , Fe 3+ , B 3+ ), altering the distribution of acid sites between channels and intersections, as probed by low-temperature (403 K) toluene methylation kinetics. Heteroatom-substituted MFI crystallized with tetrapropylammonium result in low selectivity toward p-xylene (<30%), while those crystallized using (co-)SDAs containing peripheral hydrogen-bonding groups (e.g., ethylenediamine) show high p-xylene selectivity (∼80%). These selectivities are consistent with DFT-calculated Gibbs free energy barriers for intersection-dominant and channel-dominant active site distributions, respectively. Transition states to form each xylene isomer are similar in size and charge; thus, their rate constants decrease with acid strength similarly, causing isomer selectivity to depend strongly on confinement but not on acid strength. These generalizable synthetic strategies enable independently controlling acid site strength and location in MFI zeolites and, in turn, catalytic rates and selectivities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Gas phase synthesis of the C40 nano bowl C 40 H 10

Nanobowls represent vital molecular building blocks of end-capped nanotubes and fullerenes detected in combustion systems and in deep space such as toward the planetary nebula TC-1, but their fundamental formation mechanisms have remained elusive. By merging molecular beam experiments with electronic structure calculations, we reveal a complex chain of reactions initiated through the gas-phase preparation of benzocorannulene (C 24 H 12 ) via ring annulation of the corannulenyl radical (C 20 H 9 • ) by vinylacetylene (C 4 H 4 ) as identified isomer-selectively in situ via photoionization efficiency curves and photoion mass-selected threshold photoelectron spectra. In silico studies provided compelling evidence that the benzannulation mechanism can be expanded to pentabenzocorannulene (C 40 H 20 ) followed by successive cyclodehydrogenation to the C40 nanobowl (C 40 H 10 ) – a fundamental building block of buckminsterfullerene (C 60 ). This high-temperature pathway opens up isomer-selective routes to nanobowls via resonantly stabilized free-radical intermediates and ring annulation in circumstellar envelopes of carbon stars and planetary nebulae as their descendants eventually altering our insights of the complex chemistry of carbon in our Galaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Intra- and Intermolecular Self-Assembly of a 20-nm-Wide Supramolecular Hexagonal Grid.

For the past three decades, the coordination-driven self-assembly of three-dimensional structures has undergone rapid progress; however, parallel efforts to create large discrete two-dimensional architectures-as opposed to polymers-have met with limited success. The synthesis of metallo-supramolecular systems with well-defined shapes and sizes in the range of 10-100 nm remains challenging. Here we report the construction of a series of giant supramolecular hexagonal grids, with diameters on the order of 20 nm and molecular weights greater than 65 kDa, through a combination of intra- and intermolecular metal-mediated self-assembly steps. The hexagonal intermediates and the resulting self-assembled grid architectures were imaged at submolecular resolution by scanning tunnelling microscopy. Characterization (including by scanning tunnelling spectroscopy) enabled the unambiguous atomic-scale determination of fourteen hexagonal grid isomers.

Zhang, Zhe↗