SEARCH · Search NASA

Results for “large array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Room‐Temperature Mid‐Infrared Detection Using Metasurface‐Absorber‐Integrated Phononic Crystal Oscillator

Mid-infrared (MIR) detectors find extensive applications in chemical sensing, spectroscopy, communications, biomedical diagnosis, and space exploration. Alternative to semiconductor MIR photodiodes and bolometers, mechanical-resonator-based MIR detectors show advantages in higher sensitivity and lower noise at room temperature, especially toward longer wavelength infrared. Here, uncooled room-temperature MIR detectors based on lithium niobate surface acoustic wave phononic crystal (PnC) resonators integrated with wavelength-and-polarization-selective metasurface absorber arrays are demonstrated. The detection is based on the resonant frequency shift induced by the local temperature change due to MIR absorptions. The PnC resonator is configured in an oscillating mode, enabling active readout and low-frequency noise. The 1-GHz oscillator-based MIR detector shows a relative frequency deviation of 5.24 × 10 −10 Hz −1/2 at an integration time of 50 µs, leading to an incident noise equivalent power of 197 pW Hz −1/2 when input 6-µm MIR light is modulated at 1.8 kHz, and a large dynamic range of 10 7 in incident MIR power. The device architecture is compatible with the scalable manufacturing process and can be readily extended to a broader spectral range by tailoring the absorbing wavelengths of metasurface absorbers.

Xi, Zichen [Virginia Polytechnic Inst. and State U↗

DOE OSTI2024

Can mesoscale models capture the effect from cluster wakes offshore?

Long wakes from offshore wind turbine clusters can extend tens of kilometers downstream, affecting the wind resource of a large area. Given the ability of mesoscale numerical weather prediction models to capture important atmospheric phenomena and mechanisms relevant to wake evolution, they are often used to simulate wakes behind large wind turbine clusters and their impact over a wider region. Yet, uncertainty persists regarding the accuracy of representing cluster wakes via mesoscale models and their wind turbine parameterizations. Here, we evaluate the accuracy of the Fitch wind farm parameterization in the Weather Research and Forecasting model in capturing cluster-wake effects using two different options to represent turbulent mixing in the planetary boundary layer. To this end, we compare operational data from an offshore wind farm in the North Sea that is fully or partially waked by an upstream array against high-resolution mesoscale simulations. In general, we find that mesoscale models accurately represent the effect of cluster wakes on front-row turbines of a downstream wind farm. However, the same models may not accurately capture cluster-wake effects on an entire downstream wind farm, due to misrepresenting internal-wake effects.

17 WIND ENERGY↗

DOE OSTI2026

A Scalable Reduced‐Order Model for the Steady Navier–Stokes Equations

Scaling up new scientific technologies from laboratory to industry often involves demonstrating performance on a larger scale. Computer simulations can accelerate design and predictions in the deployment process, though traditional numerical methods are computationally intractable even for intermediate pilot plant scales. Recently, the component reduced order modeling method has been developed to tackle this challenge by combining projection reduced order modeling and discontinuous Galerkin domain decomposition. However, while many scientific or engineering applications involve nonlinear physics, this method has only been demonstrated for various linear systems. In this work, the component reduced order modeling method is extended to steady Navier–Stokes flow, with application to general nonlinear physics in view. The large‐scale, global domain is decomposed into a combination of small‐scale unit component. Linear subspaces for flow velocity and pressure are identified via proper orthogonal decomposition over sample snapshots collected from each small‐scale unit component. Velocity bases are augmented with a pressure supremizer to satisfy the inf–sup condition for stable pressure prediction. Two different nonlinear reduced order modeling methods are employed and compared for efficient evaluation of nonlinear advection: A third‐order tensor projection operator and the empirical quadrature procedure. The proposed method is demonstrated on the flow over arrays of five different unit objects, achieving a 23‐fold speedup with less than 4% relative error in domains up to 256 times larger than the unit components. Furthermore, a numerical experiment with the pressure supremizer strongly indicates the need for a supremizer for stable pressure prediction. A comparison between the tensorial approach and the empirical quadrature procedure revealed a slight advantage of the empirical quadrature procedure. The framework is compared with an alternating Schwarz‐based reduced‐order approach, demonstrating improved efficiency and robustness for the DG‐based global solver while retaining flexibility for sub‐scale iterative solvers. The method is further extended to a coupled advection–diffusion and Navier–Stokes system, illustrating its applicability to multi‐physics problems and its potential for more general, inter‐coupled nonlinear systems.

42 ENGINEERING↗

DOE OSTI2026

Graphical User Interface for a Biasing Board for the PSEC6

The PSEC6 is an application-specific integrated circuit (ASIC) designed for a readout system for a large area picosecond photodetector (LAPPD). The PSEC6 is currently in fabrication and pending testing. The testing system for the PSEC5, the previous iteration of the ASIC, required expensive and non-portable equipment, because the ASIC needs twelve adjustable reference voltages. The new testing system consists of an low-cost, open-source, cross-platform graphical user interface (GUI), a digital system, and a biasing board. The digital system is the interface between the GUI and biasing board, and can be implemented on a microcontroller or field-programmable gate array (FPGA). The biasing board contains twelve digital-to-analog converters (DACs) that are configurable via the GUI, which gives users the ability to write voltage values to all or specific DACs. The GUI was developed in C on Linux using the widget library GTK4 and cross-compiled for Windows compatibility. I2C and SPI protocols were implemented on an Adafruit Feather ESP32-S3 microcontroller to write commands to the DACs and PSEC6. A hardware implementation of the I2C protocol is in development on an FPGA. Since LAPPDs will be used by the Accelerator Neutrino Neutron Interaction Experiment (ANNIE) at Fermilab, the PSEC6 testing system in this internship project can potentially benefit future neutrino research. The project is relevant to the Department of Energy’s microelectronics mission, because the PSEC6 is an ASIC that will handle fast time signals arriving from the detector for readout. It also provided experience with building a cross-platform user interface, practicing digital design and implementation in hardware description language (HDL), and using simulations to inform new design iterations.

Guerrero, Sasha Camila [North Central Coll.]↗

DOE OSTI2026

VERITAS Observations Contemporaneous with the LHAASO Detection of NGC 4278

Significant gamma-ray emission between 1 TeV and 20 TeV from a point source, 1LHAASO J1219+2915, consistent with the location of the LINER/LLAGN galaxy NGC 4278 was recently reported by the Large High Altitude Air Shower Observatory (LHAASO) collaboration. These data were later split into active and quasi-quiet states, with most of the LHAASO significance coming from the active state (MJD 59449-59589). Subsequent analysis of Fermi-LAT and Swift-XRT observations have been used to explore the double-peaked broadband emission. Models of the spectral energy distribution (SED) are currently unconstrained due to the lack of contemporaneous multiwavelength data at either peak. Here, we report serendipitous observations of NGC 4278 with the Very Energetic Radiation Imaging Telescope Array System (VERITAS), made possible by the contemporaneous observations of the nearby blazars 1ES 1218+304, 1ES 1215+303, and W Comae, each of which are located within 2° of NGC 4278. VERITAS did not detect any gamma-ray emission, and a flux upper limit was calculated. The flux upper limits constrain the photon spectrum of the quasi-quiet period, and together with Fermi-LAT, indicate a peak in the SED between 100 GeV and 2 TeV. We present an interpretation of the broadband SED that is based on acceleration of protons in the corona of the active galactic nuclei, followed by p–γ interactions and optically thin γ-ray emission. Within this framework, the implied neutrino signal is slightly below the current sensitivity of IceCube.

Archer, A. [DePauw University, Greencastle, IN (Un↗

DOE OSTI2026

Graphical User Interface for a Biasing Board for the PSEC6

Guerrero, Sasha Camila [North Central Coll.]↗

DOE OSTI2025

Rapid Inference of Logic Gate Neural Networks for Anomaly Detection in High Energy Physics

The increasing data rates and complexity of detectors at the Large Hadron Collider (LHC) necessitate fast and efficient machine learning models, particularly for rapid selection of what data to store, known as triggering. Building on recent work in differentiable logic gates, we present a public implementation of a Convolutional Differentiable Logic Gate Neural Network (CLGN). We apply this to detecting anomalies at the Level-1 Trigger at CMS using public data from the CICADA project. We demonstrate that the CLGN achieves physics performance on par with or superior to conventional quantized neural networks. We also synthesize an LGN for a Field-Programmable Gate Array (FPGA) and show highly promising FPGA characteristics, notably zero Digital Signal Processor (DSP) resource usage. This work highlights the potential of logic gate networks for high-speed, on-detector inference in High Energy Physics and beyond.

FOS: Physical sciences↗

DOE OSTI2025

Spectroscopic Characterization of redMaPPer Galaxy Clusters with DESI

Optical galaxy cluster identification algorithms such as redMaPPer promise to enable an array of astrophysical and cosmological studies, but suffer from biases whereby galaxies in front of and behind a galaxy cluster are mistakenly associated with the primary cluster halo. These projection effects caused by irreducible photometric redshift uncertainty must be quantified to facilitate the use of optical cluster catalogues. We present measurements of galaxy cluster projection effects and velocity dispersion using spectroscopy from the Dark Energy Spectroscopic Instrument. Our findings are as follows: we confirm that the fraction of redMaPPer putative member galaxies mistakenly associated with cluster haloes is richness dependent, being more than twice as large at low richness than high richness; we present the first spectroscopic evidence of an increase in projection effects with increasing redshift, by as much as 25 per cent from $z\sim 0.1$ to $z\sim 0.2$; moreover, we find qualitative evidence for luminosity dependence in projection effects, with fainter galaxies being more commonly far behind clusters than their bright counterparts; finally, we fit the scaling relation between measured mean spectroscopic richness and velocity dispersion, finding an implied linear scaling between spectroscopic richness and halo mass. We discuss further directions for the application of spectroscopic data sets to improve use of optically selected clusters to test cosmological models.

clusters↗

DOE OSTI2025

Improved heavy-ion PID using scintillation light detector with neural network analysis: a Monte Carlo simulation study

The photon collection efficiency of gaseous scintillator detectors varies according to the position of the impinging charged particles in the medium that generates scintillation light. Thus, when impinging particles are distributed over a large area, the intrinsic photon-number resolution of the system is affected by a large variation. This work presents and discusses a method for adjusting the total number of detected photons to account for variation in the photon collection efficiency as a function of the position of the light source within the scintillating medium. The method was developed and validated by processing data from systematic simulation studies based on GEANT4 that model the response of the Energy Loss Optical Scintillation System (ELOSS) detector. The position of the charged particle is calculated using a deep neural network algorithm. This is accomplished by analyzing the distribution of scintillation light recorded by the array of photosensors. The estimated particle position is then used to calculate the correction factor and adjust the amount of captured light to account for variations in the photon collection efficiency. The neural network algorithm provides excellent tracking capabilities, achieving sub-millimeter position resolution and an angular resolution of 12 mrad, approaching the performance of traditional tracking detectors (e.g., drift chambers). The present method can be generalized to any optical scintillation system where the photon collection efficiency depends on the position of the impinging particle.

Heavy-ion detectors↗

DOE OSTI2025

Feasibility of an Active Interrogation System to Classify Waste with He-4 Neutron Spectroscopy

This work investigates a 4 He-detector active interrogation system that leverages neutron spectroscopy to classify nuclear waste streams. MCNP models tested the concept through the simulation of a D-D neutron generator, an array of 4 He detectors, and various waste compositions. The fast-neutron Differential Die-Away signature was augmented with a neutron-energy discrimination signature. This signature isolates induced fission neutrons, the energy of which is greater than that of the D-D monoenergetic spectrum. With the incorporation of this spectroscopic technique, the measurement time decreased by 3–9% (depending on the degree of neutron moderation and absorption presented by the sample), demonstrating how neutron spectroscopy can enhance active interrogation methods. The reduced measurement times would have significant financial and logistical benefits for facilities with large footprints of low-level waste production.

4He detectors↗

DOE OSTI2024

Sentinel

Network intrusion detection systems (NIDS) are commonplace in network security but they frequently employ algorithms that are computational demanding requiring hardware and software with significant power requirements. Two examples of such resource-intensive algorithms used for network security are regular expression matching and broader signature pattern matching which are commonly used in deep packet inspection (DPI). Network security algorithms that have large power requirements may be a challenge for low-power internet-of-things (IoT) environments, which generally lack the power resources to implement complex security measures like computationally expensive DPI at the edge. Furthermore, IoT environments incorporating 5G standalone networks have network latency constraints beyond just power that make DPI at the edge even more difficult. Programmable logic is ideally suited for machine learning inference for DPI because of its deep instruction level parallelism and single-cycle memory access. Machine learning approaches for DPI have been explored before using the programmable logic of field programmable gate arrays (FPGA) as a potential solution for NIDS approaches that would be power-suitable for IoT. However, those previous programmable logic NIDS approaches utilize either a supervised or unsupervised learning model. Sentinel utilizes the ensemble of these two machine learning approaches known as a semi-supervised approach which has shown promise in NIDS implementations. Sentinel provides a programmable logic implementation of a semi-supervised approach for DPI which operates at much lower power and latency than a GPU implementation with negligible loss of accuracy due to quantization through a logistic regressor.

Anderson, MatthewW [Idaho National Laboratory (INL↗

DOE OSTI2026

Improbability of Post-Closure Criticality in Array of Transuranic Waste Containers after Compaction by Salt Creep at Waste Isolation Pilot Plant

Based on the rationale presented, post-closure nuclear criticality is improbable when room closure compacts containers disposing transuranic (TRU) waste emplaced at the Waste Isolation Pilot Plant (WIPP), an operating repository in bedded salt in southeastern New Mexico. As described in the original WIPP certification, a qualitative estimate of the probability of post-closure criticality in TRU waste produced from atomic energy defense activities has been low either because remote-handled TRU waste canisters are neutronically isolated by the bedded salt or because the low fissile mass in an array of contact-handled TRU waste drums cannot be compacted sufficiently by room closure from salt creep. These situations are still valid for the majority of TRU waste that is disposed at WIPP without any disposal constraints, as updated herein. This report also qualitatively evaluates the probability of criticality after disposal of TRU waste in pipe overpack containers (POC) where every POC in a shipment may have the maximum 200 fissile gram equivalent of 239Pu content. The probability of criticality for a disposal room filled with POCs is estimated during four representative phases of repository evolution: (1) a large salt block falls onto POCs in the first 20 years, (2) salt creep closes a disposal room in the first 1000 years without brine seepage and subsequent gas generation, which permits maximum compaction, (3) some brine seepage occurs into the closed room, which initiates consumption of the fiberboard (cellulose) impact absorber in the POC in the second 1000 years, and (4) full brine inundation of a room and consumption of all fiberboard thereafter. Salt-block fall in the first phase does not greatly disrupt three tiers of POCs. The compacted spacing of POCs in the later three repository conditions is calculated through high-fidelity, geomechanical modeling. Criticality evaluation of compacted 200-g 239 Pu spheres at the compacted spacing shows that neither 12-inch nor 6-inch POCs are critical after the first 1000 years, the second 1000 years, or thereafter as the sea of reflector material changes to represent the three repository conditions. Specifically, fiberboard and iron isolates 239 Pu while dry, and brine reduces the reactivity when a room is partially and fully inundated. Because POC behavior bounds behavior of other standard TRU waste containers, post-closure criticality caused by room closure compacting containers is omitted in the performance assessments for the 2019 and 2026 WIPP compliance re-certification applications to the US Environmental Protection Agency.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Gravitational Waves as a Source of Large-Scale White Noise: New Constraints

A stochastic gravitational wave (GW) background sources a shear in the flow of cosmic fluid which, through non-linear mode coupling, generates large-scale white noise (LSWN) in the kurvature density field. Building on the LSWN framework of our previous work, we derive the amplitude of this GW-induced LSWN and translate the observational non-detection of LSWN into bounds on the production redshift and density of gravity waves. In particular, a minimal constraint on gravity waves with $z=0$ density parameter $Ω_\mathrm{GW0}^*$ in frequency band $f_*$ generated at redshift $z_*$ must satisfy ${z_*}^2\,Ω_\mathrm{GW0}^*<5\times10^7\,(f_*/\mathrm{nHz})^{3/2}$. This, for example, precludes the gravity waves recently detected by pulsar timing arrays \cite{NANOGrav:2023hvm} from being present before $z_*\sim10^8$, long after the quark hadron phase transition. While orders of magnitude stronger than other constraints on gravity waves, this is a minimal LSWN constraint as realistic modeling of early universe gravity wave production, including the granularity of the gravity-wave sources and the LSWN produced by the associated acoustic waves would probably tighten this constraint by orders of magnitude.

Barenboim, Gabriela [Valencia U., IFIC; Valencia U↗

DOE OSTI2024

A Frequency Domain Methodology for Quantitative Evaluation of Diffuse Wavefield With Applications to Seismic Imaging

Abstract Ambient Noise Imaging (ANI) of subsurface structures relies on seismic interferometry of diffuse seismic wavefields. However, the lack of effective methods to quantify and identify highly diffuse waves hampers applications of ANI, particularly in evaluating seismic attenuation and monitoring structural changes with high temporal resolution. Conventional ANI approaches require data normalization, which effectively suppresses the non‐diffuse component with large amplitude but also results in significant loss of amplitude and phase information in the continuous seismic records. In this study, we propose a frequency domain method to quantitatively evaluate the degree of diffuseness of seismic wavefields by analyzing their statistical characteristics of modal amplitudes for stationarity and randomness. Tests on synthetic waveform and field nodal records show that the proposed method can effectively distinguish between diffuse and non‐diffuse waveforms for either single‐ or three‐component data. As an application, we identify a 60‐s‐long diffuse coda of a local M 2.2 earthquake recorded by a dense nodal array on the San Jacinto Fault Zone, and successfully extract high‐quality dispersion curve andQ‐value without performing data normalization. These results are consistent with those obtained by conventional methods that assess the correlation between coherency and the Green's function, and by modeling ballistic waves generated by road traffic. Our proposed method can advance the imaging of subsurface velocity and attenuation structures as well as monitoring temporal changes for scientific studies and engineering applications.

Geochemistry & Geophysics↗

DOE OSTI2025

Full‐Waveform Simulation of Infrasound Propagation in the Atmosphere: A Case Study of the 2023 April 20 SpaceX Starship Explosion

Infrasound, low‐frequency sound below 20 Hz, has been a key technology to monitor explosion events in the atmosphere. The International Monitoring System (IMS) of the Comprehensive Nuclear‐Test‐Ban Treaty Organization provides the means for continuous monitoring of infrasonic events worldwide. Infrasonic techniques for event location and size estimation can also complement other observational techniques for the detection and characterization of the entry of asteroids or large meteoroids. In this study, we describe the detection capability of IMS infrasound stations for an explosive event in the middle of the atmosphere. Full‐waveform simulations are performed with the specification of atmospheric conditions and incorporated into the event location and explosion yield estimation. We applied it to the 2023 April 20 SpaceX Starship explosion at 29 km altitude. Starship is a super heavy‐lift space vehicle constructed by SpaceX and known as the largest and most powerful rocket ever built. The Starship explosion created huge pressure disturbances in the atmosphere, and its infrasound was detected by the IMS arrays in North America between 2000 and 4000 km. Independent observational data and available ground‐truth information provide a rare opportunity to evaluate the monitoring capability of the IMS network for elevated sources in the atmosphere. We also demonstrate the capability of full‐waveform simulation for infrasound wavefield characterization and prediction to improve event location and yield estimation.

Geosciences↗

DOE OSTI2024

Field Validation of MVA Technology for Offshore CCS: Novel Ultra-High-Resolution 3D Marine Seismic Technology (P-Cable) (Final Report)

The objectives of the proposed study were to deploy and validate a specific monitoring technology, high-resolution 3D marine seismic (HR3D), appropriate for large-demonstration and commercial-scale offshore CCS sites. The project accomplished successful acquisition two HR3D seismic surveys. The first HR3D dataset was over the offshore injection site of the Tomakomai, Japan integrated pilot CCS project, which at the time of survey acquisition was actively injecting CO 2 . The first survey also represented a successful international collaboration between the DOE NETL program and Japan’s national CCS program and was the first successful acquisition and use of HR3D over an active CO 2 injection site (Meckel, Feng et al. 2019). The Tomakomai HR3D survey successfully tested a novel 4-streamer HR3D system array in which, for the first time, no cross-cable (aka “P-Cable”) was utilized and only four GeoEel streamers were used instead of the standard 12-streamer configuration. Consequently, this was not, strictly speaking, a deployment of the “P-Cable” system of (Planke and Berndt 2004) but rather a modified version, thereof, and it is the first known demonstration of the modified system configuration. One very positive outcome from the Japanese collaboration earlier in the project was the ability to learn from the Japanese how they used tail buoys with GPS to determine the position of the seismic source and receivers in time and space. Based on that experience, GCCC designed and built six GPS receivers that could be used to position the streamer receivers and the seismic source via tail buoys. A fundamental advance that was made on the original design, was the ability to directly power the tail buoy GPS units and transfer data through the streamers (i.e., vs. the batteries used at Tomakomai). The bulkiness of the GPS batteries caused drag and episodic surging of the buoys, which affected data quality by lifting up the tail end of the streamers so the receivers were not at the same depth. The units were tested onshore for accuracy and functionality, and the design was subsequently and successfully tested in marine acquisition mode during the SLP survey acquisition. The marine acquisition test and survey satisfied Subtasks 2.2.2, Novel Positioning Technology Selection and Subtask 2.2.3, Novel Positioning Technology Deployment. Results of the novel positioning technology selection (Subtask 2.2.2) were considered successful and will be incorporated in future HR3D seismic acquisition projects to reduce costs, improve deployment safety at sea, and integrate both seismic and data recording via a single data transfer through the streamers to the recording system. The project also established a permitting process through NETL NEPA compliance, which included an Environmental Assessment in a marine setting and is required for conducting these types of surveys using Federal funding. The permitting process charted a “boilerplate,” which can allow future surveys related to other funded projects to move forward more expeditiously. Future improvements that could be considered are more robust seals on the GPS module and stronger materials (especially joints) on tail buoy fabrication. These would increase fixed costs, but would be advisable and probably more economic long-term if multiple HR3D surveys are planned. Project Accomplishments include: • Pre-survey Sensitivity Study • Marine geochemistry methods and data analysis • Successful HR3D seismic dataset acquired @ Tomakomai active CO 2 injection marine site • Developed advanced seismic processing techniques • No NRMS anomalies detected in overburden; Demonstration of containment • Repeatability study • Second survey collected @ San Luis Pass, TX • 4D application using positioning techniques developed in the project for monitoring were successful

3D seismic GPS positioning↗

DOE OSTI2025

A Multichannel Silicon Package for Large-Scale Skipper-CCD Experiments

The next generation of experiments for light-dark-matter and neutrino searches based on skipper charge-coupled devices (skipper-CCDs) introduces new challenges for the sensor packaging and readout architecture. Scaling the active mass while simultaneously reducing the experimental backgrounds in orders of magnitude requires a novel high-density silicon-based package that must be massively produced and tested. In this work, we present a silicon multichip module design capable of hosting up to 16 skipper-CCDs, along with the fabrication process for the first prototypes. We thoroughly tested and characterized the assembled prototypes to build an empirical model for the video output signal of skipper-CCDs integrated into the silicon package. We then used this model in simulations to optimize the fabrication process and achieve the robust performance required for the full-scale array, which we validated through a new round of prototype fabrication. We outline the specifications selected for the ongoing production of 1500 silicon wafers that will ultimately add up to a 10-kg skipper-CCD array with 24000 readout channels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Near-complete extraction of maximum stored energy from large-core fibers using coherent pulse stacking amplification of femtosecond pulses

High field science relies on ultrashort pulse lasers with multi-joule pulse energies for studying light–matter interactions under extreme conditions and for driving particle accelerators and secondary radiation sources of x rays, gamma rays, neutrons, positrons, muons, and protons. Next-generation laser drivers will require a 10 3 -10 4 times increase in pulse repetition rates, producing multi-joule energies at multi-kilowatt average powers to enable practical applications in nuclear engineering, advanced materials, medicine, biology, homeland security, and high-energy physics. Spatially coherently combined femtosecond fiber lasers are recognized as a pathway to these next-generation drivers, with significant practical advantages including high efficiency and the possibility of compact integration. However, chirped pulse amplification in fibers is capable of extracting only a small fraction (usually ~1%) of the maximum stored energy. Here we demonstrate near-complete maximum stored energy extraction with low accumulated nonlinearity from a large-core fiber amplifier using coherent pulse stacking amplification. We have amplified a 81-pulse stacking burst in a 85 µm core chirally coupled core Yb-doped fiber, extracting up to 9.5 mJ (~90% of stored energy) with < 4.5 radians of accumulated nonlinear phase, temporally combined this burst into a single pulse, and achieved 4.2 mJ pulses of 313 fs bandwidth-limited duration after compression. This represents, to our knowledge, the highest energy extracted and compressed into a femtosecond pulse from a single fiber amplifier, enabling approximately two orders of magnitude size reduction of future high-energy coherently spatially combined fiber laser arrays.

47 OTHER INSTRUMENTATION↗