Search NASA⌕ Search

SEARCH · Search NASA

Results for “large field of view”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

XTE J1906+09 Observations with RXTE

The 89 s pulsar XTE J1906+09 was serendipitously discovered in a 1996 observation of the soft gamma repeater SGR 1900+14. Two outbursts, in 1996 September and 1998 September have been reported to date. Since this system appears to be transient, it is likely in a Be/X-ray binary, accreting material from a circumstellar disk around its companion. Preliminary pulse timing analyses of RXTE data from the 1998 September outburst revealed an orbital signature consistent with either (i) a low-eccentricity, short period orbit, similar to OAO 1657-415 or (ii) periastron passage in a longer orbital period, higher eccentricity Be/X-ray binary system. No companion has been identified to date due to the large 2 feet error radius of the current best position. SGR 1900+14 has been regularly monitored with RXTE since 1998. Because XTE J1906+09 is only 33 feet away, it often shares the RXTE/PCA field of view with SGR 1900+14, giving us a large number of archival PCA observations. We will present results of a search of RXTE data for outbursts of XTE 1906+09, including histories of pulse frequency, 2-30 keV intensity, pulse profiles, and energy spectra. Results of a pulse timing analysis of the detected outbursts will also be presented.

Wilson, Colleen A.↗

Water-Vapor Raman Lidar System Reaches Higher Altitude

A Raman lidar system for measuring the vertical distribution of water vapor in the atmosphere is located at the Table Mountain Facility (TMF) in California. Raman lidar systems for obtaining vertical water-vapor profiles in the troposphere have been in use for some time. The TMF system incorporates a number of improvements over prior such systems that enable extension of the altitude range of measurements through the tropopause into the lower stratosphere. One major obstacle to extension of the altitude range is the fact that the mixing ratio of water vapor in the tropopause and the lower stratosphere is so low that Raman lidar measurements in this region are limited by noise. Therefore, the design of the TMF system incorporates several features intended to maximize the signal-to-noise ratio. These features include (1) the use of 355-nm-wavelength laser pulses having an energy (0.9 J per pulse) that is high relative to the laser-pulse energy levels of prior such systems, (2) a telescope having a large aperture (91 cm in diameter) and a narrow field of view (angular width .0.6 mrad), and (3) narrow-bandpass (wavelength bandwidth 0.6 nm) filters for the water-vapor Raman spectral channels. In addition to the large-aperture telescope, three telescopes having apertures 7.5 cm in diameter are used to collect returns from low altitudes.

Leblanc, Thierry↗

GLAST Large Area Telescope Multiwavelength Opportunities

The Gamma-ray Large Area Space Telescope (GLAST) is scheduled for launch this year. Because the GLAST Large Area Telescope (LAT) has a huge field of view and the GLAST Observatory will be operated in scanning mode, it will survey the entire sky daily. The GLAST Mission and the LAT Collaboration invite cooperative efforts from theorists and observers at all wavelengths to help optimize the science. Possible topics include: (1) Blazars: These Active Galactic Nuclei are expected to be a major source class for LAT. Identifying new blazars, monitoring their variability, and joining programs to carry out planned or Target of Opportunity multiwavelength campaigns will all be important activities. The study of AGN gamma-ray jets can help link the accretion processes close to the black hole with the large-scale interaction of the AGN with its environment. (2) Unidentified Gamma-ray Sources: Modeling of possible gamma-ray sources is important to establish testable hypotheses. New gamma-ray sources need first to be identified with known objects by position, spectrum, or time variability, and then multiwavelength studies can be used to explore the astrophysical implications of high-energy radiation from these sources. The LAT team is committed to releasing a preliminary source list about six months after the start of science operations.

Thompson, David↗

In Search of Short Gamma-ray Burst Optical Counterparts with the Zwicky Transient Facility

The Fermi Gamma-ray Burst Monitor (GBM) triggers on-board in response to∼40 short gamma-ray bursts (SGRBs) per year; however, their large localization regions have made the search for optical counterparts a challenging endeavour. We have developed and executed an extensive program with the wide field of view of the Zwicky Transient Facility (ZTF) camera, mounted on the Palomar 48 inch Oschin telescope (P48), to perform target-of-opportunity (ToO) observations on 10Fermi-GBM SGRBsduring 2018 and 2020-2021. Bridging the large sky areas with small field of view optical telescopesin order to track the evolution of potential candidates, we look for the elusive SGRB afterglows andkilonovae (KNe) associated with these high-energy events. No counterpart has yet been found, eventhough more than 10 ground based telescopes, part of the Global Relay of Observatories WatchingTransients Happen (GROWTH) network, have taken part in these efforts. The candidate selectionprocedure and the follow-up strategy have shown that ZTF is an efficient instrument for searchingfor poorly localized SGRBs, retrieving a reasonable number of candidates to follow-up and showingpromising capabilities as the community approaches the multi-messenger era. Based on the medianlimiting magnitude of ZTF, our searches would have been able to retrieve a GW170817-like event upto∼200 Mpc and SGRB afterglows to z = 0.16 or 0.4, depending on the assumed underlying energymodel. Future ToOs will expand the horizon to z = 0.2 and 0.7 respectively.

Tomas Ahumada↗

A perspective on coherent structures and conceptual models for turbulent boundary layer physics

Direct numerical simulations of turbulent boundary layers have been analyzed to develop a unified conceptual model for the kinematics of coherent motions in low Reynolds number canonical turbulent boundary layers. All classes of coherent motions are considered in the model, including low-speed streaks, ejections and sweeps, vortical structures, near-wall and outer-region shear layers, sublayer pockets, and large-scale outer-region eddies. The model reflects the conclusions from the study of the simulated boundary layer that vortical structures are directly associated with the production of turbulent shear stresses, entrainment, dissipation of turbulence kinetic energy, and the fluctuating pressure field. These results, when viewed from the perspective of the large body of published work on the subject of coherent motions, confirm that vortical structures may be considered the central dynamic element in the maintenance of turbulence in the canonical boundary layer. Vortical structures serve as a framework on which to construct a unified picture of boundary layer structure, providing a means to relate the many known structural elements in a consistent way.

Robinson, Stephen K.↗

The Application of Infrared Thermographic Inspection Techniques to the Space Shuttle Thermal Protection System

The Nondestructive Evaluation Sciences Branch at NASA s Langley Research Center has been actively involved in the development of thermographic inspection techniques for more than 15 years. Since the Space Shuttle Columbia accident, NASA has focused on the improvement of advanced NDE techniques for the Reinforced Carbon-Carbon (RCC) panels that comprise the orbiter s wing leading edge. Various nondestructive inspection techniques have been used in the examination of the RCC, but thermography has emerged as an effective inspection alternative to more traditional methods. Thermography is a non-contact inspection method as compared to ultrasonic techniques which typically require the use of a coupling medium between the transducer and material. Like radiographic techniques, thermography can be used to inspect large areas, but has the advantage of minimal safety concerns and the ability for single-sided measurements. Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. A typical implementation of PCA is when the eigenvectors are generated from the data set being analyzed. Although it is a powerful tool for enhancing the visibility of defects in thermal data, PCA can be computationally intense and time consuming when applied to the large data sets typical in thermography. Additionally, PCA can experience problems when very large defects are present (defects that dominate the field-of-view), since the calculation of the eigenvectors is now governed by the presence of the defect, not the "good" material. To increase the processing speed and to minimize the negative effects of large defects, an alternative method of PCA is being pursued where a fixed set of eigenvectors, generated from an analytic model of the thermal response of the material under examination, is used to process the thermal data from the RCC materials. Details of a one-dimensional analytic model and a two-dimensional finite-element model will be presented. An overview of the PCA process as well as a quantitative signal-to-noise comparison of the results of performing both embodiments of PCA on thermographic data from various RCC specimens will be shown. Finally, a number of different applications of this technology to various RCC components will be presented.

Cramer, K. E.↗

The Application of Principal Component Analysis Using Fixed Eigenvectors to the Infrared Thermographic Inspection of the Space Shuttle Thermal Protection System

The Nondestructive Evaluation Sciences Branch at NASA s Langley Research Center has been actively involved in the development of thermographic inspection techniques for more than 15 years. Since the Space Shuttle Columbia accident, NASA has focused on the improvement of advanced NDE techniques for the Reinforced Carbon-Carbon (RCC) panels that comprise the orbiter s wing leading edge. Various nondestructive inspection techniques have been used in the examination of the RCC, but thermography has emerged as an effective inspection alternative to more traditional methods. Thermography is a non-contact inspection method as compared to ultrasonic techniques which typically require the use of a coupling medium between the transducer and material. Like radiographic techniques, thermography can be used to inspect large areas, but has the advantage of minimal safety concerns and the ability for single-sided measurements. Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. A typical implementation of PCA is when the eigenvectors are generated from the data set being analyzed. Although it is a powerful tool for enhancing the visibility of defects in thermal data, PCA can be computationally intense and time consuming when applied to the large data sets typical in thermography. Additionally, PCA can experience problems when very large defects are present (defects that dominate the field-of-view), since the calculation of the eigenvectors is now governed by the presence of the defect, not the good material. To increase the processing speed and to minimize the negative effects of large defects, an alternative method of PCA is being pursued when a fixed set of eigenvectors is used to process the thermal data from the RCC materials. These eigen vectors can be generated either from an analytic model of the thermal response of the material under examination, or from a large cross section of experimental data. This paper will provide the details of the analytic model; an overview of the PCA process; as well as a quantitative signal-to-noise comparison of the results of performing both embodiments of PCA on thermographic data from various RCC specimens. Details of a system that has been developed to allow insitu inspection of a majority of shuttle RCC components will be presented along with the acceptance test results for this system. Additionally, the results of applying this technology to the Space Shuttle Discovery after its return from flight will be presented.

Cramer, K. Elliott↗

Principal Component Analysis of Thermographic Data

Principal Component Analysis (PCA) has been shown effective for reducing thermographic NDE data. While a reliable technique for enhancing the visibility of defects in thermal data, PCA can be computationally intense and time consuming when applied to the large data sets typical in thermography. Additionally, PCA can experience problems when very large defects are present (defects that dominate the field-of-view), since the calculation of the eigenvectors is now governed by the presence of the defect, not the "good" material. To increase the processing speed and to minimize the negative effects of large defects, an alternative method of PCA is being pursued where a fixed set of eigenvectors, generated from an analytic model of the thermal response of the material under examination, is used to process the thermal data from composite materials. This method has been applied for characterization of flaws.

Winfree, William P.↗

Searching for dark matter in the Galactic halo with a wide field of view TeV gamma-ray observatory in the Southern Hemisphere

Although there is mounting evidence that dark matter (DM) exists in the Universe, its fundamental nature remains unknown. We present sensitivity estimates to detect DM particles with a future very-high-energy (gsim TeV) wide field-of-view gamma-ray observatory in the Southern Hemisphere. This observatory would search for gamma rays from the annihilation or decay of DM particles in the Galactic halo. With a wide field of view, both the Galactic Center and a large fraction of the Galactic halo will be detectable with unprecedented sensitivity to DM in the mass range of ~500 GeV to ~2 PeV . These results, combined with those from other present and future gamma-ray observatories, will likely probe the thermal relic annihilation cross section of Weakly Interacting Massive Particles for all masses from ~80 TeV down to the GeV range in most annihilation channels.

79 ASTRONOMY AND ASTROPHYSICS↗

The Gamow Explorer: a Gamma-Ray Burst Observatory to study the high redshift universe and enable multi-messenger astrophysics

The Gamow Explorer will use Gamma Ray Bursts (GRBs) to: 1) probe the high redshift universe (z < 6) when the first stars were born, galaxies formed and Hydrogen was reionized; and 2) enable multi-messenger astrophysics by rapidly identifying Electro-Magnetic (IR/Optical/X-ray) counterparts to Gravitational Wave (GW) events. GRBs have been detected out to z ~ 9 and their afterglows are a bright beacon lasting a few days that can be used to observe the spectral fingerprints of the host galaxy and intergalactic medium to map the period of reionization and early metal enrichment. Gamow Explorer is optimized to quickly identify high-z events to trigger follow-up observations with JWST and large ground-based telescopes. A wide field of view Lobster Eye X-ray Telescope (LEXT) will search for GRBs and locate them with arc-minute precision. When a GRB is detected, the rapidly slewing spacecraft will point the 5 photometric channel Photo-z Infra-Red Telescope (PIRT) to identify high redshift (z < 6) long GRBs within 100s and send an alert within 1000s of the GRB trigger. An L2 orbit provides < 95% observing efficiency with pointing optimized for follow up by the James Webb Space Telescope (JWST) and ground observatories. The predicted Gamow Explorer high-z rate is <10 times that of the Neil Gehrels Swift Observatory. The instrument and mission capabilities also enable rapid identification of short GRBs and their afterglows associated with GW events. The Gamow Explorer will be proposed to the 2021 NASA MIDEX call and if approved, launched in 2028.

79 ASTRONOMY AND ASTROPHYSICS↗

Kilonova Detectability with Wide-field Instruments

Abstract Kilonovae are ultraviolet, optical, and infrared transients powered by the radioactive decay of heavy elements following a neutron star merger. Joint observations of kilonovae and gravitational waves can offer key constraints on the source of Galactic r -process enrichment, among other astrophysical topics. However, robust constraints on heavy element production require rapid kilonova detection (within ∼1 day of merger) as well as multiwavelength observations across multiple epochs. In this study, we quantify the ability of 13 wide-field-of-view instruments to detect kilonovae, leveraging a large grid of over 900 radiative transfer simulations with 54 viewing angles per simulation. We consider both current and upcoming instruments, collectively spanning the full kilonova spectrum. The Roman Space Telescope has the highest redshift reach of any instrument in the study, observing kilonovae out to z ∼ 1 within the first day post-merger. We demonstrate that BlackGEM, DECam, GOTO, the Vera C. Rubin Observatory’s LSST, ULTRASAT, VISTA, and WINTER can observe some kilonovae out to z ∼ 0.1 (∼475 Mpc), while DDOTI, MeerLICHT, PRIME, Swift/UVOT, and ZTF are confined to more nearby observations. Furthermore, we provide a framework to infer kilonova ejecta properties following nondetections and explore variation in detectability with these ejecta parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffuse 0.511 MeV line emission and the distribution of positron annihilation in the galaxy

We model the distribution in the Galaxy of 0.511 MeV line emission and the implied positron annihilation using plausible distributions based on observations at other photon energies. We use 0.511 MeV line observations from the Galactic center and from directions away from the Galactic center to normalize the two-dimensional 0.511 MeV sky maps. We find that in order to understand all of the available data it is necessary to invoke the presence of a time-variable component of 0.511 MeV line emission in addition to an underlying diffuse component. The large 0.511 MeV fluxes observed with broad field of view detectors, such as the SMM gamma-ray spectrometer, can be reconciled with the small fluxes seen with narrow field-of-view instruments (GRIS and OSSE) from directions away from the Galactic center if the diffuse emission follows the distribution of Galactic novae for which the recently detected 0.511 MeV line emission from the Galactic center with OSSE is predominantly of diffuse origin. For future GRIS and HEXAGONE observations from the direction of the Galactic center we predict a minimum 0.511 MeV line flux of (6.0 +/- 0.9) x 10 exp -4 photons/sq cm/s.

Skibo, J. G.↗

Investigation of Overlap Correction Techniques for Application in the Micro-Pulse Lidar Network (MPLNET)

The Micro-Pulse Lidar NETwork (MPLNET) is comprised of micro-pulse lidars (MPL) stationed around the globe to provide measurements of aerosol and cloud vertical distribution on a continuous basis. MPLNET sites are co-located with sunphotometers in the AErosol Robotic NETwork (AERONET) to provide joint measurements of aerosol optical depth, size, and other inherent optical properties. The IPCC 2001 report discusses . the importance of obtaining routine measurements of aerosol vertical structure, especially for absorbing aerosols. MPLNET provides exactly this sort of measurement, including calculation of aerosol extinction profiles, in a near real-time basis for all sites in the network. In order to obtain aerosol profiles, near range signal returns (0-6 km) must be accurately measured by the MPL. This measurement is complicated by the instrument s overlap range: Le., the minimum distance at which returning signals are completely in the instrument s field-of-view (FOV). Typical MPL overlap distances are large, between 5 - 6 km, due to the narrow FOV of the MPL receiver. A function describing the MPL overlap must be determined and used to correct signals in this range. Currently, overlap functions for MPLNET are determined using horizontal MPL measurements along a path with 10-1 5 km clear line-of-sight and a homogenous atmosphere. These conditions limit the location and ease in which successful overlaps can be obtained. Furthermore, the current MPLNET process of correcting for overlap increases the uncertainty and bias error for the near range signals and the resulting aerosol extinction profiles. To address these issues, an alternative overlap correction method using a small-diameter, wide FOV receiver is being considered for potential use in MPLNET. The wide FOV receiver has a much shorter overlap distance and will be used to calculate the overlap function of the MPL receiver. This approach has a significant benefit in that overlap corrections could be obtained without the need for horizontal measurements. A review of both overlap methods is presented, including a discussion of the impact on reducing the uncertainty and bias error in MPLNET aerosol profiles.

Berkoff, Timothy A.↗

Looking for Interacting Binaries in Old Open Clusters

We requested a 12 ks observation of the old open cluster NGC7142 with the aim to investigate the population of interacting binaries, and compare the properties with those of interacting binaries in other old open clusters. Unfortunately, the observation suffered from long periods of background flaring, and as a result the effective exposure time was shortened to only approximately 25% of the planned exposure. The sensitivity to detect sources in the cluster was therefore much reduced, hampering a useful comparison with other clusters observed with Chandra and XMM. We detect 5 sources (all less than 300 counts) in the full field of view of the detectors; based on the large separations from the cluster center, we expect that at least 3-4 are not associated with the cluster. A brief paper that reports the results is in preparation.

Grindley, Jonathan↗

Fermi-LAT Observations of the LIGO Event GW150914

The Fermi Large Area Telescope (LAT) has an instantaneous field of view (FoV) covering 1 5 of the sky and it completes a survey of the entire sky in high-energy gamma-rays every 3 hr. It enables searches for transient phenomena over timescales from milliseconds to years. Among these phenomena could be electromagnetic counterparts to gravitational wave (GW) sources. In this paper, we present a detailed study of the LAT observations relevant to Laser Interferometer Gravitational-wave Observatory (LIGO) event GW150914, which is the first direct detection of gravitational waves and has been interpreted as being due to the coalescence of two stellar-mass black holes. The localization region for GW150914 was outside the LAT FoV at the time of the GW signal. However, as part of routine survey observations, the LAT observed the entire LIGO localization region within approx. 70 minutes of the trigger and thus enabled a comprehensive search for a gamma-ray counterpart to GW150914.The study of the LAT data presented here did not find any potential counterparts to GW150914, but it did provide limits on the presence of a transient counterpart above 100 MeV on timescales of hours to days over the entire GW150914 localization region.

gamma-ray burst: general – gamma-rays: general â↗

Concepts for Next Generation Grating Spectrometer Imaging Atmospheric Sounders from LEO and GEO

Spaceborne infrared atmospheric sounders measure the spectrum of the upwelling radiance in the infrared with ultra-high spectral resolution. The resolution is sufficient to measure absorption features of atmospheric constituents enabling retrieval of atmospheric temperature and water vapor profiles, surface emission and atmospheric constituents. The Atmospheric Infrared Sounder (AIRS) on Aqua launched in May of 2002 was the first hyperspectral infrared sounder designed for this purpose and is still operational today. AIRS has been followed by the Infrared Atmospheric Sounding Interferometer (IASI) on MetOp A and B, and the Cross-track Infrared Sounder (CrIS) on Suomi NPP and JPSS. All instruments are operating well improving weather forecast and providing a wealth of information about the atmosphere. Additional CrIS and IASI instruments are expected to be launched providing data of this type into the late 2030’s. AIRS, CrIS and IASI are all Low Earth Orbit (LEO) instruments with nominal spatial resolutions of 14km. Future IR sounders must achieve higher spatial and temporal resolution to match improvements in forecast models and be less costly to match anticipated future budget pressures. Higher temporal resolution can be achieved in several ways including operation in Geostationary Earth Orbit (GEO) or in constellations of SmallSats and CubeSats. Higher spatial resolution can be achieved using larger format focal plane assemblies in the instruments and larger aperture telescopes. Grating spectrometers are well suited to large format FPAs by allowing a wide field of view in a compact package. Concepts for next generation grating spectrometer IR sounders that have been developed over the years at JPL are presented along with technology advancements made to enable these concepts to achieve their stated goals.

Pagano, Thomas S.↗

Radar Super Resolution using a Deep Convolutional Neural Network

Super-resolution involves synthetically increasing the resolution of gridded data beyond its native resolution. Typically, this is done using interpolation schemes, which estimate sub-grid scale values from neighboring data, and perform the same operation everywhere regardless of the large-scale context, or by requiring a network of radars with overlapping fields of view. Recently, significant progress has been made in single image super resolution using convolutional neural networks. Conceptually, a neural network may be able to learn relations between large scale precipitation features and the associated sub-pixel scale variability and outperform interpolation schemes. Here, we use a deep convolutional neural network to artificially enhance the resolution of NEXRAD PPI scans. The model is trained on 6-months of reflectivity observations from the Langley Hill WA (KLGX) radar, and we find that it substantially outperforms common interpolation schemes for x4 and x8 resolution increases based on several objective error and perceptual quality metrics.

radar, machine learning, super resolution, Remote ↗

The Gravity Collective: A Comprehensive Analysis of the Electromagnetic Search for the Binary Neutron Star Merger GW190425

We present an ultraviolet to infrared search for the electromagnetic (EM) counterpart to GW190425, the second ever binary neutron star merger discovered by the LIGO-Virgo-KAGRA Collaboration. GW190425 was more distant and had a larger localization area than GW170817, so we use a new tool, Teglon, to redistribute the GW190425 localization probability in the context of galaxy catalogs within the final localization volume. We derive a 90th percentile area of 6688 deg 2 , a ∼1.5× improvement relative to the LIGO/Virgo map, and show how Teglon provides an order-of-magnitude boost to the search efficiency of small (≤1 deg 2 ) field-of-view instruments. We combine our data with a large, publicly reported imaging data set, covering 9078.59 deg 2 of unique area and 48.13% of the LIGO/Virgo-assigned localization probability, to calculate the most comprehensive kilonova (KN), short gamma-ray burst (sGRB) afterglow, and model-independent constraints on the EM emission from a hypothetical counterpart to GW190425 to date under the assumption that no counterpart was found in these data. If the counterpart were similar to AT 2017gfo, there would be a 28.4% chance of it being detected in the combined data set. We are relatively insensitive to an on-axis sGRB, and rule out a generic transient with a similar peak luminosity and decline rate as AT 2017gfo to 30% confidence. Finally, across our new imaging and publicly reported data, we find 28 candidate optical counterparts that we cannot rule out as being associated with GW190425, finding that four such counterparts discovered within the localization volume and within 5 days of merger exhibit luminosities consistent with a KN.

79 ASTRONOMY AND ASTROPHYSICS↗