Technology Development for the Advanced Technology Large Aperture Space Telescope (ATLAST) as a Candidate Large UV-Optical-Infrared (LUVOIR) Surveyor
No abstract available
Technology Development for the Advanced Technology↗
SEARCH · Search NASA
Results for “large optics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Optical space astronomy and goals of the large space telescope.
Optical astronomy now means the study of EM radiation in the very near IR and vacuum UV in addition to the visible wavelengths. Practical constraints presently define the IR limit at about 11000 A, where photoemissive cathodes become ineffective, and the UV limit at 912 A, where the hydrogen of the interstellar medium limits the view to very nearby objects. Salient events of the first decade of optical space astronomy are discussed together with the orbiting astronomical observatories. Particular attention is given to the large space telescope (LST) project, taking into account the physical characteristics of the LST and the scientific program.
O'Dell, C. R.↗
A New Way of Testing Large Thin Membrane, Optical Modal Testing of the 1/10th Scale Model of the NASA NAGT Sunshield
The Next Generation Space Telescope design includes a deployed sunshield to thermally insulate the telescope, keeping vital detector temperatures below 60 degrees Kelvin. The sunshield consists of four struts supporting four thin film membranes. Since it would be very difficult to test the full-scale sunshield on the ground due to its size and the 1-g environment, it is important to have accurate analytical models of the sunshield to analyze its affect on the observatory. A 1/10th-scale model of the sunshield has been manufactured in order to test the analytical modeling techniques used to predict the dynamic behavior of such large, lightweight structures. A modal survey test of the scale model has been performed in a vacuum environment, using a laser vibrometer to measure the mode shapes of the membranes. The presentation describes the setup and test procedures related to these tests and presents some of the experimental results obtained and the lessons learned.
Ross, Brian↗
The Simons Observatory: modeling optical systematics in the Large Aperture Telescope
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope, allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics that are now being built. We describe nonsequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far-field beam patterns, which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
Gudmundsson, Jon E. (ORCID:0000000317600355)↗
The Simons Observatory: Modeling Optical Systematics in the Large Aperture Telescope
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics which are now being built. We describe non-sequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far field beam patterns which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Fast Steering Mirror Disturbance Effects on Overall System Optical Performance for the Large Ultraviolet/optical/infrared Surveyor (LUVOIR) Concept Using a Non-Contact Vibration Isolation and Precision Pointing System
As the optical performance requirements of space telescopes get more stringent, the need to analyze all possible error sources early in the mission design becomes critical. One large telescope with tight performance requirements is the Large Ultraviolet / Optical / Infrared Surveyor (LUVOIR) concept. The LUVOIR concept includes a 15-meter-diameter segmented-aperture telescope with a suite of serviceable instruments operating over a range of wavelengths between 100nm to 2.5um. Using an isolation architecture that involves no mechanical contact between the telescope and the host spacecraft structure allows for tighter performance metrics than current space-based telescopes being flown. Because of this separation, the spacecraft disturbances can be greatly reduced and disturbances on the telescope payload contribute more to the optical performance error. A portion of the optical performance error comes from the disturbances generated from the motion of the Fast Steering Mirror (FSM) on the payload. Characterizing the effects of this disturbance gives insight into the specifications on the FSM needed to achieve the tight optical performance requirements of the overall system. Through analysis of the LUVOIR finite element model and linear optical model given a range of input disturbances at the FSM, the optical performance of the telescope and recommendations for FSM specifications can be determined. The LUVOIR observatory control strategy consists of a multi-loop control architecture including the spacecraft Attitude Control System (ACS), Vibration Isolation and Precision Pointing System (VIPPS), and FSM. This paper focuses on the control loop containing the FSM disturbances and their effects on the telescope optical performance.
Sacks, Lia W.↗
The role of cool-flame fluctuations in high pressure spray flames, studied using high-speed optical diagnostics and large eddy simulations.
Abstract not provided.
Tagliante, Fabien↗
A high-speed, large-capacity, 'jukebox' optical disk system
Two optical disk 'jukebox' mass storage systems which provide access to any data in a store of 10 to the 13th bits (1250G bytes) within six seconds have been developed. The optical disk jukebox system is divided into two units, including a hardware/software controller and a disk drive. The controller provides flexibility and adaptability, through a ROM-based microcode-driven data processor and a ROM-based software-driven control processor. The cartridge storage module contains 125 optical disks housed in protective cartridges. Attention is given to a conceptual view of the disk drive unit, the NASA optical disk system, the NASA database management system configuration, the NASA optical disk system interface, and an open systems interconnect reference model.
Ammon, G. J.↗
Optical detection of large meteoroids in space
CCD sensors placed across the focal plane of large Schmidt telescopes have great potential for detecting and measuring the very low flux in space of meteoroids with diameters larger than 1 meter. With the Palomar 'Big Schmidt', a detection rate of 1.4 per hour is obtained for meteoroids between 0.6 and 200 meters in diameter. For the Baker-Nunn 'Satellite Tracking Camera', the corresponding rate is about 0.8 per hour. The key to obtaining such high detection rates derives from approximately setting the sensor integration time equal to the time it takes a meteoroid to cross a pixel field of view. This minimizes signal to noise problems and is accomplished, in practice, by multiple summing of short integration time data records to obtain data records of longer effective integration times.
Zook, H. A.↗
Improved Large-Field Focusing Schlieren System
System used to examine complicated two- and three-dimensional flows. High-brightness large-field focusing schlieren system incorporates Fresnel lens instead of glass diffuser. In system with large field of view, image may also be very large. Relay optical subsystem minifies large image while retaining all of light. Facilities candidates for use of focusing schlieren include low-speed wind and water tunnels. Heated or cooled flow tracers or injected low- or high-density tracers used to make flows visible for photographic recording.
Weinstein, Leonard M.↗
Large infrared and optical color gradients in the Cartwheel ring galaxy - Evidence for the first epoch of star formation in the wake of an expanding ring
Substantial near-infrared and optical color gradients have been observed within the disk of the classical ring galaxy A0035-324 (the 'Cartwheel'). The slope of the radial B-V, V-K color gradient coincides with starburst color evolution predictions, indicating that the age of the disk population is a function of radius. Observations indicate that the youngest stars are on the leading edge of the outer ring, and the stellar population grows increasingly older toward the nucleus. The radial color gradient, taken together with other evidence, strongly support the collisional picture for the formation of ring galaxies. Strong IR emission observed in the outer ring appears to be directly associated with the young star-forming regions rather than an evolved stellar population. We conclude that star formation is occurring in a mainly gaseous expanding density wave and that the Cartwheel is undergoing its first epoch of star formation since its formation.
Marcum, P. M.↗
New technologies for the actuation and control of large aperture lightweight optical quality mirrors
Explore the source record for details and available documents.
MEMS NEMS adaptice optics inchworm actuator↗
Optical Vortices with Large Orbital Momentum: Generation and Interference
We demonstrate a method for generation of beams of light with large angular momenta. The method utilizes whispering gallery mode resonators that transform a plane electromagnetic wave into high order Bessel beams. Interference pattern among the beams as well as shadow pictures induced by the beams are observed and studied.
diffraction theory↗
Recent Updates to the Arnold Mirror Modeler and Integration into the Evolving NASA Overall Design System for Large Space Based Optical Systems
Since last year, a number of expanded capabilities have been added to the modeler. The support the integration with thermal modeling, the program can now produce simplified thermal models with the same geometric parameters as the more detailed dynamic and even more refined stress models. The local mesh refinement and mesh improvement tools have been expanded and more user friendly. The goal is to provide a means of evaluating both monolithic and segmented mirrors to the same level of fidelity and loading conditions at reasonable man-power efforts. The paper will demonstrate most of these new capabilities.
Arnold, William R., Sr.↗
Optical vortices with large orbital momentum : generation and interference
We demonstrate a method for generation of beams of light with large angular momenta. The method utilizes whispering gallery mode resonators that transform a plane electromagnetic wave into high order Bessel beams. Interference pattern among the beams as well as shadow pictures induced by the beams are observed and studied.
Maleki, Lute↗
Highly conductive and transparent coatings from flow-aligned silver nanowires with large electrical and optical anisotropy
Explore the source record for details and available documents.
Ye Xu↗
End-to-End Assessment of a Large Aperture Segmented Ultraviolet Optical Infrared (UVOIR) Telescope Architecture
Key challenges of a future large aperture, segmented Ultraviolet Optical Infrared (UVOIR) Telescope capable of performing a spectroscopic survey of hundreds of Exoplanets will be sufficient stability to achieve 10^-10 contrast measurements and sufficient throughput and sensitivity for high yield Exo-Earth spectroscopic detection. Our team has collectively assessed an optimized end to end architecture including a high throughput coronagraph capable of working with a segmented telescope, a cost-effective and heritage based stable segmented telescope, a control architecture that minimizes the amount of new technologies, and an Exo-Earth yield assessment to evaluate potential performance. These efforts are combined through integrated modeling, coronagraph evaluations, and Exo-Earth yield calculations to assess the potential performance of the selected architecture. In addition, we discusses the scalability of this architecture to larger apertures and the technological tall poles to enabling it.
Feinberg, Lee↗
End-to-End Assessment of a Large Aperture Segmented Ultraviolet Optical Infrared (UVOIR) Telescope Architecture
Key challenges of a future large aperture, segmented Ultraviolet Optical Infrared (UVOIR) Telescope capable of performing a spectroscopic survey of hundreds of Exoplanets will be sufficient stability to achieve 10-10 contrast measurements and sufficient throughput and sensitivity for high yield Exo-Earth spectroscopic detection. Our team has collectively assessed an optimized end to end architecture including a high throughput coronagraph capable of working with a segmented telescope, a cost-effective and heritage based stable segmented telescope, a control architecture that minimizes the amount of new technologies, and an Exo-Earth yield assessment to evaluate potential performance.
Feinberg, Lee↗